| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright IBM Corp. 2012 |
| * |
| * Author(s): |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "zpci" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <asm/pci_debug.h> |
| #include <asm/sclp.h> |
| |
| #include "pci_bus.h" |
| |
| /* Content Code Description for PCI Function Error */ |
| struct zpci_ccdf_err { |
| u32 reserved1; |
| u32 fh; /* function handle */ |
| u32 fid; /* function id */ |
| u32 ett : 4; /* expected table type */ |
| u32 mvn : 12; /* MSI vector number */ |
| u32 dmaas : 8; /* DMA address space */ |
| u32 : 6; |
| u32 q : 1; /* event qualifier */ |
| u32 rw : 1; /* read/write */ |
| u64 faddr; /* failing address */ |
| u32 reserved3; |
| u16 reserved4; |
| u16 pec; /* PCI event code */ |
| } __packed; |
| |
| /* Content Code Description for PCI Function Availability */ |
| struct zpci_ccdf_avail { |
| u32 reserved1; |
| u32 fh; /* function handle */ |
| u32 fid; /* function id */ |
| u32 reserved2; |
| u32 reserved3; |
| u32 reserved4; |
| u32 reserved5; |
| u16 reserved6; |
| u16 pec; /* PCI event code */ |
| } __packed; |
| |
| static void __zpci_event_error(struct zpci_ccdf_err *ccdf) |
| { |
| struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); |
| struct pci_dev *pdev = NULL; |
| |
| zpci_err("error CCDF:\n"); |
| zpci_err_hex(ccdf, sizeof(*ccdf)); |
| |
| if (zdev) |
| pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn); |
| |
| pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n", |
| pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid); |
| |
| if (!pdev) |
| return; |
| |
| pdev->error_state = pci_channel_io_perm_failure; |
| pci_dev_put(pdev); |
| } |
| |
| void zpci_event_error(void *data) |
| { |
| if (zpci_is_enabled()) |
| __zpci_event_error(data); |
| } |
| |
| static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) |
| { |
| struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid); |
| struct pci_dev *pdev = NULL; |
| enum zpci_state state; |
| int ret; |
| |
| if (zdev && zdev->zbus && zdev->zbus->bus) |
| pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn); |
| |
| zpci_err("avail CCDF:\n"); |
| zpci_err_hex(ccdf, sizeof(*ccdf)); |
| |
| switch (ccdf->pec) { |
| case 0x0301: /* Reserved|Standby -> Configured */ |
| if (!zdev) { |
| ret = clp_add_pci_device(ccdf->fid, ccdf->fh, 1); |
| break; |
| } |
| /* the configuration request may be stale */ |
| if (zdev->state != ZPCI_FN_STATE_STANDBY) |
| break; |
| zdev->fh = ccdf->fh; |
| zdev->state = ZPCI_FN_STATE_CONFIGURED; |
| ret = zpci_enable_device(zdev); |
| if (ret) |
| break; |
| |
| pdev = pci_scan_single_device(zdev->zbus->bus, zdev->devfn); |
| if (!pdev) |
| break; |
| |
| pci_bus_add_device(pdev); |
| pci_lock_rescan_remove(); |
| pci_bus_add_devices(zdev->zbus->bus); |
| pci_unlock_rescan_remove(); |
| break; |
| case 0x0302: /* Reserved -> Standby */ |
| if (!zdev) { |
| clp_add_pci_device(ccdf->fid, ccdf->fh, 0); |
| break; |
| } |
| zdev->fh = ccdf->fh; |
| break; |
| case 0x0303: /* Deconfiguration requested */ |
| if (!zdev) |
| break; |
| if (pdev) |
| zpci_remove_device(zdev); |
| |
| ret = zpci_disable_device(zdev); |
| if (ret) |
| break; |
| |
| ret = sclp_pci_deconfigure(zdev->fid); |
| zpci_dbg(3, "deconf fid:%x, rc:%d\n", zdev->fid, ret); |
| if (!ret) |
| zdev->state = ZPCI_FN_STATE_STANDBY; |
| |
| break; |
| case 0x0304: /* Configured -> Standby|Reserved */ |
| if (!zdev) |
| break; |
| if (pdev) { |
| /* Give the driver a hint that the function is |
| * already unusable. */ |
| pdev->error_state = pci_channel_io_perm_failure; |
| zpci_remove_device(zdev); |
| } |
| |
| zdev->fh = ccdf->fh; |
| zpci_disable_device(zdev); |
| zdev->state = ZPCI_FN_STATE_STANDBY; |
| if (!clp_get_state(ccdf->fid, &state) && |
| state == ZPCI_FN_STATE_RESERVED) { |
| zpci_zdev_put(zdev); |
| } |
| break; |
| case 0x0306: /* 0x308 or 0x302 for multiple devices */ |
| clp_rescan_pci_devices(); |
| break; |
| case 0x0308: /* Standby -> Reserved */ |
| if (!zdev) |
| break; |
| zpci_zdev_put(zdev); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void zpci_event_availability(void *data) |
| { |
| if (zpci_is_enabled()) |
| __zpci_event_availability(data); |
| } |