drivers/ata/pata_buddha.c

// SPDX-License-Identifier: GPL-2.0

/*
 * Buddha, Catweasel and X-Surf PATA controller driver
 *
 * Copyright (c) 2018 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * Based on buddha.c:
 *
 *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
 */

#include <linux/ata.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/mm.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/zorro.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>

#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/ide.h>
#include <asm/setup.h>

#define DRV_NAME "pata_buddha"
#define DRV_VERSION "0.1.1"

#define BUDDHA_BASE1	0x800
#define BUDDHA_BASE2	0xa00
#define BUDDHA_BASE3	0xc00
#define XSURF_BASE1	0xb000 /* 2.5" interface */
#define XSURF_BASE2	0xd000 /* 3.5" interface */
#define BUDDHA_CONTROL	0x11a
#define BUDDHA_IRQ	0xf00
#define XSURF_IRQ	0x7e
#define BUDDHA_IRQ_MR	0xfc0	/* master interrupt enable */

enum {
	BOARD_BUDDHA = 0,
	BOARD_CATWEASEL,
	BOARD_XSURF
};

static unsigned int buddha_bases[3] = {
	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
};

static unsigned int xsurf_bases[2] = {
	XSURF_BASE1, XSURF_BASE2
};

static struct scsi_host_template pata_buddha_sht = {
	ATA_PIO_SHT(DRV_NAME),
};

/* FIXME: is this needed? */
static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
					 unsigned char *buf,
					 unsigned int buflen, int rw)
{
	struct ata_device *dev = qc->dev;
	struct ata_port *ap = dev->link->ap;
	void __iomem *data_addr = ap->ioaddr.data_addr;
	unsigned int words = buflen >> 1;

	/* Transfer multiple of 2 bytes */
	if (rw == READ)
		raw_insw((u16 *)data_addr, (u16 *)buf, words);
	else
		raw_outsw((u16 *)data_addr, (u16 *)buf, words);

	/* Transfer trailing byte, if any. */
	if (unlikely(buflen & 0x01)) {
		unsigned char pad[2] = { };

		/* Point buf to the tail of buffer */
		buf += buflen - 1;

		if (rw == READ) {
			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
			*buf = pad[0];
		} else {
			pad[0] = *buf;
			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
		}
		words++;
	}

	return words << 1;
}

/*
 * Provide our own set_mode() as we don't want to change anything that has
 * already been configured..
 */
static int pata_buddha_set_mode(struct ata_link *link,
				struct ata_device **unused)
{
	struct ata_device *dev;

	ata_for_each_dev(dev, link, ENABLED) {
		/* We don't really care */
		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
		dev->xfer_shift = ATA_SHIFT_PIO;
		dev->flags |= ATA_DFLAG_PIO;
		ata_dev_info(dev, "configured for PIO\n");
	}
	return 0;
}

static bool pata_buddha_irq_check(struct ata_port *ap)
{
	u8 ch;

	ch = z_readb((unsigned long)ap->private_data);

	return !!(ch & 0x80);
}

static void pata_xsurf_irq_clear(struct ata_port *ap)
{
	z_writeb(0, (unsigned long)ap->private_data);
}

static struct ata_port_operations pata_buddha_ops = {
	.inherits	= &ata_sff_port_ops,
	.sff_data_xfer	= pata_buddha_data_xfer,
	.sff_irq_check	= pata_buddha_irq_check,
	.cable_detect	= ata_cable_unknown,
	.set_mode	= pata_buddha_set_mode,
};

static struct ata_port_operations pata_xsurf_ops = {
	.inherits	= &ata_sff_port_ops,
	.sff_data_xfer	= pata_buddha_data_xfer,
	.sff_irq_check	= pata_buddha_irq_check,
	.sff_irq_clear	= pata_xsurf_irq_clear,
	.cable_detect	= ata_cable_unknown,
	.set_mode	= pata_buddha_set_mode,
};

static int pata_buddha_probe(struct zorro_dev *z,
			     const struct zorro_device_id *ent)
{
	static const char * const board_name[] = {
		"Buddha", "Catweasel", "X-Surf"
	};
	struct ata_host *host;
	void __iomem *buddha_board;
	unsigned long board;
	unsigned int type = ent->driver_data;
	unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
	void *old_drvdata;
	int i;

	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);

	board = z->resource.start;

	if (type != BOARD_XSURF) {
		if (!devm_request_mem_region(&z->dev,
					     board + BUDDHA_BASE1,
					     0x800, DRV_NAME))
			return -ENXIO;
	} else {
		if (!devm_request_mem_region(&z->dev,
					     board + XSURF_BASE1,
					     0x1000, DRV_NAME))
			return -ENXIO;
		if (!devm_request_mem_region(&z->dev,
					     board + XSURF_BASE2,
					     0x1000, DRV_NAME)) {
		}
	}

	/* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
	if (type == BOARD_XSURF)
		old_drvdata = dev_get_drvdata(&z->dev);

	/* allocate host */
	host = ata_host_alloc(&z->dev, nr_ports);
	if (type == BOARD_XSURF)
		dev_set_drvdata(&z->dev, old_drvdata);
	if (!host)
		return -ENXIO;

	buddha_board = ZTWO_VADDR(board);

	/* enable the board IRQ on Buddha/Catweasel */
	if (type != BOARD_XSURF)
		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);

	for (i = 0; i < nr_ports; i++) {
		struct ata_port *ap = host->ports[i];
		void __iomem *base, *irqport;
		unsigned long ctl = 0;

		if (type != BOARD_XSURF) {
			ap->ops = &pata_buddha_ops;
			base = buddha_board + buddha_bases[i];
			ctl = BUDDHA_CONTROL;
			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
		} else {
			ap->ops = &pata_xsurf_ops;
			base = buddha_board + xsurf_bases[i];
			/* X-Surf has no CS1* (Control/AltStat) */
			irqport = buddha_board + XSURF_IRQ;
		}

		ap->pio_mask = ATA_PIO4;
		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;

		ap->ioaddr.data_addr		= base;
		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
		ap->ioaddr.command_addr		= base + 2 + 7 * 4;

		if (ctl) {
			ap->ioaddr.altstatus_addr = base + ctl;
			ap->ioaddr.ctl_addr	  = base + ctl;
		}

		ap->private_data = (void *)irqport;

		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
			      ctl ? board + buddha_bases[i] + ctl : 0);
	}

	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
			  IRQF_SHARED, &pata_buddha_sht);

	return 0;
}

static void pata_buddha_remove(struct zorro_dev *z)
{
	struct ata_host *host = dev_get_drvdata(&z->dev);

	ata_host_detach(host);
}

static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
	{ 0 }
};
MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);

static struct zorro_driver pata_buddha_driver = {
	.name           = "pata_buddha",
	.id_table       = pata_buddha_zorro_tbl,
	.probe          = pata_buddha_probe,
	.remove         = pata_buddha_remove,
};

/*
 * We cannot have a modalias for X-Surf boards, as it competes with the
 * zorro8390 network driver. As a stopgap measure until we have proper
 * MFD support for this board, we manually attach to it late after Zorro
 * has enumerated its boards.
 */
static int __init pata_buddha_late_init(void)
{
	struct zorro_dev *z = NULL;

	/* Auto-bind to regular boards */
	zorro_register_driver(&pata_buddha_driver);

	/* Manually bind to all X-Surf boards */
	while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
		static struct zorro_device_id xsurf_ent = {
			ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
		};

		pata_buddha_probe(z, &xsurf_ent);
	}

	return 0;
}
late_initcall(pata_buddha_late_init);

MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);