| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Memory subsystem support |
| * |
| * Written by Matt Tolentino <matthew.e.tolentino@intel.com> |
| * Dave Hansen <haveblue@us.ibm.com> |
| * |
| * This file provides the necessary infrastructure to represent |
| * a SPARSEMEM-memory-model system's physical memory in /sysfs. |
| * All arch-independent code that assumes MEMORY_HOTPLUG requires |
| * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/topology.h> |
| #include <linux/capability.h> |
| #include <linux/device.h> |
| #include <linux/memory.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/mm.h> |
| #include <linux/stat.h> |
| #include <linux/slab.h> |
| #include <linux/xarray.h> |
| |
| #include <linux/atomic.h> |
| #include <linux/uaccess.h> |
| |
| #define MEMORY_CLASS_NAME "memory" |
| |
| static const char *const online_type_to_str[] = { |
| [MMOP_OFFLINE] = "offline", |
| [MMOP_ONLINE] = "online", |
| [MMOP_ONLINE_KERNEL] = "online_kernel", |
| [MMOP_ONLINE_MOVABLE] = "online_movable", |
| }; |
| |
| int memhp_online_type_from_str(const char *str) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(online_type_to_str); i++) { |
| if (sysfs_streq(str, online_type_to_str[i])) |
| return i; |
| } |
| return -EINVAL; |
| } |
| |
| #define to_memory_block(dev) container_of(dev, struct memory_block, dev) |
| |
| static int sections_per_block; |
| |
| static inline unsigned long memory_block_id(unsigned long section_nr) |
| { |
| return section_nr / sections_per_block; |
| } |
| |
| static inline unsigned long pfn_to_block_id(unsigned long pfn) |
| { |
| return memory_block_id(pfn_to_section_nr(pfn)); |
| } |
| |
| static inline unsigned long phys_to_block_id(unsigned long phys) |
| { |
| return pfn_to_block_id(PFN_DOWN(phys)); |
| } |
| |
| static int memory_subsys_online(struct device *dev); |
| static int memory_subsys_offline(struct device *dev); |
| |
| static struct bus_type memory_subsys = { |
| .name = MEMORY_CLASS_NAME, |
| .dev_name = MEMORY_CLASS_NAME, |
| .online = memory_subsys_online, |
| .offline = memory_subsys_offline, |
| }; |
| |
| /* |
| * Memory blocks are cached in a local radix tree to avoid |
| * a costly linear search for the corresponding device on |
| * the subsystem bus. |
| */ |
| static DEFINE_XARRAY(memory_blocks); |
| |
| static BLOCKING_NOTIFIER_HEAD(memory_chain); |
| |
| int register_memory_notifier(struct notifier_block *nb) |
| { |
| return blocking_notifier_chain_register(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_notifier); |
| |
| void unregister_memory_notifier(struct notifier_block *nb) |
| { |
| blocking_notifier_chain_unregister(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_notifier); |
| |
| static void memory_block_release(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| kfree(mem); |
| } |
| |
| unsigned long __weak memory_block_size_bytes(void) |
| { |
| return MIN_MEMORY_BLOCK_SIZE; |
| } |
| EXPORT_SYMBOL_GPL(memory_block_size_bytes); |
| |
| /* |
| * Show the first physical section index (number) of this memory block. |
| */ |
| static ssize_t phys_index_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long phys_index; |
| |
| phys_index = mem->start_section_nr / sections_per_block; |
| return sprintf(buf, "%08lx\n", phys_index); |
| } |
| |
| /* |
| * Legacy interface that we cannot remove. Always indicate "removable" |
| * with CONFIG_MEMORY_HOTREMOVE - bad heuristic. |
| */ |
| static ssize_t removable_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d\n", (int)IS_ENABLED(CONFIG_MEMORY_HOTREMOVE)); |
| } |
| |
| /* |
| * online, offline, going offline, etc. |
| */ |
| static ssize_t state_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| ssize_t len = 0; |
| |
| /* |
| * We can probably put these states in a nice little array |
| * so that they're not open-coded |
| */ |
| switch (mem->state) { |
| case MEM_ONLINE: |
| len = sprintf(buf, "online\n"); |
| break; |
| case MEM_OFFLINE: |
| len = sprintf(buf, "offline\n"); |
| break; |
| case MEM_GOING_OFFLINE: |
| len = sprintf(buf, "going-offline\n"); |
| break; |
| default: |
| len = sprintf(buf, "ERROR-UNKNOWN-%ld\n", |
| mem->state); |
| WARN_ON(1); |
| break; |
| } |
| |
| return len; |
| } |
| |
| int memory_notify(unsigned long val, void *v) |
| { |
| return blocking_notifier_call_chain(&memory_chain, val, v); |
| } |
| |
| /* |
| * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is |
| * OK to have direct references to sparsemem variables in here. |
| */ |
| static int |
| memory_block_action(unsigned long start_section_nr, unsigned long action, |
| int online_type, int nid) |
| { |
| unsigned long start_pfn; |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| int ret; |
| |
| start_pfn = section_nr_to_pfn(start_section_nr); |
| |
| switch (action) { |
| case MEM_ONLINE: |
| ret = online_pages(start_pfn, nr_pages, online_type, nid); |
| break; |
| case MEM_OFFLINE: |
| ret = offline_pages(start_pfn, nr_pages); |
| break; |
| default: |
| WARN(1, KERN_WARNING "%s(%ld, %ld) unknown action: " |
| "%ld\n", __func__, start_section_nr, action, action); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int memory_block_change_state(struct memory_block *mem, |
| unsigned long to_state, unsigned long from_state_req) |
| { |
| int ret = 0; |
| |
| if (mem->state != from_state_req) |
| return -EINVAL; |
| |
| if (to_state == MEM_OFFLINE) |
| mem->state = MEM_GOING_OFFLINE; |
| |
| ret = memory_block_action(mem->start_section_nr, to_state, |
| mem->online_type, mem->nid); |
| |
| mem->state = ret ? from_state_req : to_state; |
| |
| return ret; |
| } |
| |
| /* The device lock serializes operations on memory_subsys_[online|offline] */ |
| static int memory_subsys_online(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| int ret; |
| |
| if (mem->state == MEM_ONLINE) |
| return 0; |
| |
| /* |
| * When called via device_online() without configuring the online_type, |
| * we want to default to MMOP_ONLINE. |
| */ |
| if (mem->online_type == MMOP_OFFLINE) |
| mem->online_type = MMOP_ONLINE; |
| |
| ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); |
| mem->online_type = MMOP_OFFLINE; |
| |
| return ret; |
| } |
| |
| static int memory_subsys_offline(struct device *dev) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| |
| if (mem->state == MEM_OFFLINE) |
| return 0; |
| |
| return memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); |
| } |
| |
| static ssize_t state_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| const int online_type = memhp_online_type_from_str(buf); |
| struct memory_block *mem = to_memory_block(dev); |
| int ret; |
| |
| if (online_type < 0) |
| return -EINVAL; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| switch (online_type) { |
| case MMOP_ONLINE_KERNEL: |
| case MMOP_ONLINE_MOVABLE: |
| case MMOP_ONLINE: |
| /* mem->online_type is protected by device_hotplug_lock */ |
| mem->online_type = online_type; |
| ret = device_online(&mem->dev); |
| break; |
| case MMOP_OFFLINE: |
| ret = device_offline(&mem->dev); |
| break; |
| default: |
| ret = -EINVAL; /* should never happen */ |
| } |
| |
| unlock_device_hotplug(); |
| |
| if (ret < 0) |
| return ret; |
| if (ret) |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| /* |
| * phys_device is a bad name for this. What I really want |
| * is a way to differentiate between memory ranges that |
| * are part of physical devices that constitute |
| * a complete removable unit or fru. |
| * i.e. do these ranges belong to the same physical device, |
| * s.t. if I offline all of these sections I can then |
| * remove the physical device? |
| */ |
| static ssize_t phys_device_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| return sprintf(buf, "%d\n", mem->phys_device); |
| } |
| |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| static void print_allowed_zone(char *buf, int nid, unsigned long start_pfn, |
| unsigned long nr_pages, int online_type, |
| struct zone *default_zone) |
| { |
| struct zone *zone; |
| |
| zone = zone_for_pfn_range(online_type, nid, start_pfn, nr_pages); |
| if (zone != default_zone) { |
| strcat(buf, " "); |
| strcat(buf, zone->name); |
| } |
| } |
| |
| static ssize_t valid_zones_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; |
| struct zone *default_zone; |
| int nid; |
| |
| /* |
| * Check the existing zone. Make sure that we do that only on the |
| * online nodes otherwise the page_zone is not reliable |
| */ |
| if (mem->state == MEM_ONLINE) { |
| /* |
| * The block contains more than one zone can not be offlined. |
| * This can happen e.g. for ZONE_DMA and ZONE_DMA32 |
| */ |
| default_zone = test_pages_in_a_zone(start_pfn, |
| start_pfn + nr_pages); |
| if (!default_zone) |
| return sprintf(buf, "none\n"); |
| strcat(buf, default_zone->name); |
| goto out; |
| } |
| |
| nid = mem->nid; |
| default_zone = zone_for_pfn_range(MMOP_ONLINE, nid, start_pfn, |
| nr_pages); |
| strcat(buf, default_zone->name); |
| |
| print_allowed_zone(buf, nid, start_pfn, nr_pages, MMOP_ONLINE_KERNEL, |
| default_zone); |
| print_allowed_zone(buf, nid, start_pfn, nr_pages, MMOP_ONLINE_MOVABLE, |
| default_zone); |
| out: |
| strcat(buf, "\n"); |
| |
| return strlen(buf); |
| } |
| static DEVICE_ATTR_RO(valid_zones); |
| #endif |
| |
| static DEVICE_ATTR_RO(phys_index); |
| static DEVICE_ATTR_RW(state); |
| static DEVICE_ATTR_RO(phys_device); |
| static DEVICE_ATTR_RO(removable); |
| |
| /* |
| * Show the memory block size (shared by all memory blocks). |
| */ |
| static ssize_t block_size_bytes_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lx\n", memory_block_size_bytes()); |
| } |
| |
| static DEVICE_ATTR_RO(block_size_bytes); |
| |
| /* |
| * Memory auto online policy. |
| */ |
| |
| static ssize_t auto_online_blocks_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%s\n", |
| online_type_to_str[memhp_default_online_type]); |
| } |
| |
| static ssize_t auto_online_blocks_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| const int online_type = memhp_online_type_from_str(buf); |
| |
| if (online_type < 0) |
| return -EINVAL; |
| |
| memhp_default_online_type = online_type; |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(auto_online_blocks); |
| |
| /* |
| * Some architectures will have custom drivers to do this, and |
| * will not need to do it from userspace. The fake hot-add code |
| * as well as ppc64 will do all of their discovery in userspace |
| * and will require this interface. |
| */ |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| static ssize_t probe_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| u64 phys_addr; |
| int nid, ret; |
| unsigned long pages_per_block = PAGES_PER_SECTION * sections_per_block; |
| |
| ret = kstrtoull(buf, 0, &phys_addr); |
| if (ret) |
| return ret; |
| |
| if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1)) |
| return -EINVAL; |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| nid = memory_add_physaddr_to_nid(phys_addr); |
| ret = __add_memory(nid, phys_addr, |
| MIN_MEMORY_BLOCK_SIZE * sections_per_block); |
| |
| if (ret) |
| goto out; |
| |
| ret = count; |
| out: |
| unlock_device_hotplug(); |
| return ret; |
| } |
| |
| static DEVICE_ATTR_WO(probe); |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| /* |
| * Support for offlining pages of memory |
| */ |
| |
| /* Soft offline a page */ |
| static ssize_t soft_offline_page_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = soft_offline_page(pfn, 0); |
| return ret == 0 ? count : ret; |
| } |
| |
| /* Forcibly offline a page, including killing processes. */ |
| static ssize_t hard_offline_page_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (kstrtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = memory_failure(pfn, 0); |
| return ret ? ret : count; |
| } |
| |
| static DEVICE_ATTR_WO(soft_offline_page); |
| static DEVICE_ATTR_WO(hard_offline_page); |
| #endif |
| |
| /* |
| * Note that phys_device is optional. It is here to allow for |
| * differentiation between which *physical* devices each |
| * section belongs to... |
| */ |
| int __weak arch_get_memory_phys_device(unsigned long start_pfn) |
| { |
| return 0; |
| } |
| |
| /* |
| * A reference for the returned memory block device is acquired. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| static struct memory_block *find_memory_block_by_id(unsigned long block_id) |
| { |
| struct memory_block *mem; |
| |
| mem = xa_load(&memory_blocks, block_id); |
| if (mem) |
| get_device(&mem->dev); |
| return mem; |
| } |
| |
| /* |
| * Called under device_hotplug_lock. |
| */ |
| struct memory_block *find_memory_block(struct mem_section *section) |
| { |
| unsigned long block_id = memory_block_id(__section_nr(section)); |
| |
| return find_memory_block_by_id(block_id); |
| } |
| |
| static struct attribute *memory_memblk_attrs[] = { |
| &dev_attr_phys_index.attr, |
| &dev_attr_state.attr, |
| &dev_attr_phys_device.attr, |
| &dev_attr_removable.attr, |
| #ifdef CONFIG_MEMORY_HOTREMOVE |
| &dev_attr_valid_zones.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group memory_memblk_attr_group = { |
| .attrs = memory_memblk_attrs, |
| }; |
| |
| static const struct attribute_group *memory_memblk_attr_groups[] = { |
| &memory_memblk_attr_group, |
| NULL, |
| }; |
| |
| /* |
| * register_memory - Setup a sysfs device for a memory block |
| */ |
| static |
| int register_memory(struct memory_block *memory) |
| { |
| int ret; |
| |
| memory->dev.bus = &memory_subsys; |
| memory->dev.id = memory->start_section_nr / sections_per_block; |
| memory->dev.release = memory_block_release; |
| memory->dev.groups = memory_memblk_attr_groups; |
| memory->dev.offline = memory->state == MEM_OFFLINE; |
| |
| ret = device_register(&memory->dev); |
| if (ret) { |
| put_device(&memory->dev); |
| return ret; |
| } |
| ret = xa_err(xa_store(&memory_blocks, memory->dev.id, memory, |
| GFP_KERNEL)); |
| if (ret) { |
| put_device(&memory->dev); |
| device_unregister(&memory->dev); |
| } |
| return ret; |
| } |
| |
| static int init_memory_block(unsigned long block_id, unsigned long state) |
| { |
| struct memory_block *mem; |
| unsigned long start_pfn; |
| int ret = 0; |
| |
| mem = find_memory_block_by_id(block_id); |
| if (mem) { |
| put_device(&mem->dev); |
| return -EEXIST; |
| } |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| |
| mem->start_section_nr = block_id * sections_per_block; |
| mem->state = state; |
| start_pfn = section_nr_to_pfn(mem->start_section_nr); |
| mem->phys_device = arch_get_memory_phys_device(start_pfn); |
| mem->nid = NUMA_NO_NODE; |
| |
| ret = register_memory(mem); |
| |
| return ret; |
| } |
| |
| static int add_memory_block(unsigned long base_section_nr) |
| { |
| int section_count = 0; |
| unsigned long nr; |
| |
| for (nr = base_section_nr; nr < base_section_nr + sections_per_block; |
| nr++) |
| if (present_section_nr(nr)) |
| section_count++; |
| |
| if (section_count == 0) |
| return 0; |
| return init_memory_block(memory_block_id(base_section_nr), |
| MEM_ONLINE); |
| } |
| |
| static void unregister_memory(struct memory_block *memory) |
| { |
| if (WARN_ON_ONCE(memory->dev.bus != &memory_subsys)) |
| return; |
| |
| WARN_ON(xa_erase(&memory_blocks, memory->dev.id) == NULL); |
| |
| /* drop the ref. we got via find_memory_block() */ |
| put_device(&memory->dev); |
| device_unregister(&memory->dev); |
| } |
| |
| /* |
| * Create memory block devices for the given memory area. Start and size |
| * have to be aligned to memory block granularity. Memory block devices |
| * will be initialized as offline. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| int create_memory_block_devices(unsigned long start, unsigned long size) |
| { |
| const unsigned long start_block_id = pfn_to_block_id(PFN_DOWN(start)); |
| unsigned long end_block_id = pfn_to_block_id(PFN_DOWN(start + size)); |
| struct memory_block *mem; |
| unsigned long block_id; |
| int ret = 0; |
| |
| if (WARN_ON_ONCE(!IS_ALIGNED(start, memory_block_size_bytes()) || |
| !IS_ALIGNED(size, memory_block_size_bytes()))) |
| return -EINVAL; |
| |
| for (block_id = start_block_id; block_id != end_block_id; block_id++) { |
| ret = init_memory_block(block_id, MEM_OFFLINE); |
| if (ret) |
| break; |
| } |
| if (ret) { |
| end_block_id = block_id; |
| for (block_id = start_block_id; block_id != end_block_id; |
| block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (WARN_ON_ONCE(!mem)) |
| continue; |
| unregister_memory(mem); |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * Remove memory block devices for the given memory area. Start and size |
| * have to be aligned to memory block granularity. Memory block devices |
| * have to be offline. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| void remove_memory_block_devices(unsigned long start, unsigned long size) |
| { |
| const unsigned long start_block_id = pfn_to_block_id(PFN_DOWN(start)); |
| const unsigned long end_block_id = pfn_to_block_id(PFN_DOWN(start + size)); |
| struct memory_block *mem; |
| unsigned long block_id; |
| |
| if (WARN_ON_ONCE(!IS_ALIGNED(start, memory_block_size_bytes()) || |
| !IS_ALIGNED(size, memory_block_size_bytes()))) |
| return; |
| |
| for (block_id = start_block_id; block_id != end_block_id; block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (WARN_ON_ONCE(!mem)) |
| continue; |
| unregister_memory_block_under_nodes(mem); |
| unregister_memory(mem); |
| } |
| } |
| |
| /* return true if the memory block is offlined, otherwise, return false */ |
| bool is_memblock_offlined(struct memory_block *mem) |
| { |
| return mem->state == MEM_OFFLINE; |
| } |
| |
| static struct attribute *memory_root_attrs[] = { |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| &dev_attr_probe.attr, |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| &dev_attr_soft_offline_page.attr, |
| &dev_attr_hard_offline_page.attr, |
| #endif |
| |
| &dev_attr_block_size_bytes.attr, |
| &dev_attr_auto_online_blocks.attr, |
| NULL |
| }; |
| |
| static struct attribute_group memory_root_attr_group = { |
| .attrs = memory_root_attrs, |
| }; |
| |
| static const struct attribute_group *memory_root_attr_groups[] = { |
| &memory_root_attr_group, |
| NULL, |
| }; |
| |
| /* |
| * Initialize the sysfs support for memory devices. At the time this function |
| * is called, we cannot have concurrent creation/deletion of memory block |
| * devices, the device_hotplug_lock is not needed. |
| */ |
| void __init memory_dev_init(void) |
| { |
| int ret; |
| unsigned long block_sz, nr; |
| |
| /* Validate the configured memory block size */ |
| block_sz = memory_block_size_bytes(); |
| if (!is_power_of_2(block_sz) || block_sz < MIN_MEMORY_BLOCK_SIZE) |
| panic("Memory block size not suitable: 0x%lx\n", block_sz); |
| sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE; |
| |
| ret = subsys_system_register(&memory_subsys, memory_root_attr_groups); |
| if (ret) |
| panic("%s() failed to register subsystem: %d\n", __func__, ret); |
| |
| /* |
| * Create entries for memory sections that were found |
| * during boot and have been initialized |
| */ |
| for (nr = 0; nr <= __highest_present_section_nr; |
| nr += sections_per_block) { |
| ret = add_memory_block(nr); |
| if (ret) |
| panic("%s() failed to add memory block: %d\n", __func__, |
| ret); |
| } |
| } |
| |
| /** |
| * walk_memory_blocks - walk through all present memory blocks overlapped |
| * by the range [start, start + size) |
| * |
| * @start: start address of the memory range |
| * @size: size of the memory range |
| * @arg: argument passed to func |
| * @func: callback for each memory section walked |
| * |
| * This function walks through all present memory blocks overlapped by the |
| * range [start, start + size), calling func on each memory block. |
| * |
| * In case func() returns an error, walking is aborted and the error is |
| * returned. |
| * |
| * Called under device_hotplug_lock. |
| */ |
| int walk_memory_blocks(unsigned long start, unsigned long size, |
| void *arg, walk_memory_blocks_func_t func) |
| { |
| const unsigned long start_block_id = phys_to_block_id(start); |
| const unsigned long end_block_id = phys_to_block_id(start + size - 1); |
| struct memory_block *mem; |
| unsigned long block_id; |
| int ret = 0; |
| |
| if (!size) |
| return 0; |
| |
| for (block_id = start_block_id; block_id <= end_block_id; block_id++) { |
| mem = find_memory_block_by_id(block_id); |
| if (!mem) |
| continue; |
| |
| ret = func(mem, arg); |
| put_device(&mem->dev); |
| if (ret) |
| break; |
| } |
| return ret; |
| } |
| |
| struct for_each_memory_block_cb_data { |
| walk_memory_blocks_func_t func; |
| void *arg; |
| }; |
| |
| static int for_each_memory_block_cb(struct device *dev, void *data) |
| { |
| struct memory_block *mem = to_memory_block(dev); |
| struct for_each_memory_block_cb_data *cb_data = data; |
| |
| return cb_data->func(mem, cb_data->arg); |
| } |
| |
| /** |
| * for_each_memory_block - walk through all present memory blocks |
| * |
| * @arg: argument passed to func |
| * @func: callback for each memory block walked |
| * |
| * This function walks through all present memory blocks, calling func on |
| * each memory block. |
| * |
| * In case func() returns an error, walking is aborted and the error is |
| * returned. |
| */ |
| int for_each_memory_block(void *arg, walk_memory_blocks_func_t func) |
| { |
| struct for_each_memory_block_cb_data cb_data = { |
| .func = func, |
| .arg = arg, |
| }; |
| |
| return bus_for_each_dev(&memory_subsys, NULL, &cb_data, |
| for_each_memory_block_cb); |
| } |