| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Management Interface (SCMI) Notification support |
| * |
| * Copyright (C) 2020 ARM Ltd. |
| */ |
| /** |
| * DOC: Theory of operation |
| * |
| * SCMI Protocol specification allows the platform to signal events to |
| * interested agents via notification messages: this is an implementation |
| * of the dispatch and delivery of such notifications to the interested users |
| * inside the Linux kernel. |
| * |
| * An SCMI Notification core instance is initialized for each active platform |
| * instance identified by the means of the usual &struct scmi_handle. |
| * |
| * Each SCMI Protocol implementation, during its initialization, registers with |
| * this core its set of supported events using scmi_register_protocol_events(): |
| * all the needed descriptors are stored in the &struct registered_protocols and |
| * &struct registered_events arrays. |
| * |
| * Kernel users interested in some specific event can register their callbacks |
| * providing the usual notifier_block descriptor, since this core implements |
| * events' delivery using the standard Kernel notification chains machinery. |
| * |
| * Given the number of possible events defined by SCMI and the extensibility |
| * of the SCMI Protocol itself, the underlying notification chains are created |
| * and destroyed dynamically on demand depending on the number of users |
| * effectively registered for an event, so that no support structures or chains |
| * are allocated until at least one user has registered a notifier_block for |
| * such event. Similarly, events' generation itself is enabled at the platform |
| * level only after at least one user has registered, and it is shutdown after |
| * the last user for that event has gone. |
| * |
| * All users provided callbacks and allocated notification-chains are stored in |
| * the @registered_events_handlers hashtable. Callbacks' registration requests |
| * for still to be registered events are instead kept in the dedicated common |
| * hashtable @pending_events_handlers. |
| * |
| * An event is identified univocally by the tuple (proto_id, evt_id, src_id) |
| * and is served by its own dedicated notification chain; information contained |
| * in such tuples is used, in a few different ways, to generate the needed |
| * hash-keys. |
| * |
| * Here proto_id and evt_id are simply the protocol_id and message_id numbers |
| * as described in the SCMI Protocol specification, while src_id represents an |
| * optional, protocol dependent, source identifier (like domain_id, perf_id |
| * or sensor_id and so forth). |
| * |
| * Upon reception of a notification message from the platform the SCMI RX ISR |
| * passes the received message payload and some ancillary information (including |
| * an arrival timestamp in nanoseconds) to the core via @scmi_notify() which |
| * pushes the event-data itself on a protocol-dedicated kfifo queue for further |
| * deferred processing as specified in @scmi_events_dispatcher(). |
| * |
| * Each protocol has it own dedicated work_struct and worker which, once kicked |
| * by the ISR, takes care to empty its own dedicated queue, deliverying the |
| * queued items into the proper notification-chain: notifications processing can |
| * proceed concurrently on distinct workers only between events belonging to |
| * different protocols while delivery of events within the same protocol is |
| * still strictly sequentially ordered by time of arrival. |
| * |
| * Events' information is then extracted from the SCMI Notification messages and |
| * conveyed, converted into a custom per-event report struct, as the void *data |
| * param to the user callback provided by the registered notifier_block, so that |
| * from the user perspective his callback will look invoked like: |
| * |
| * int user_cb(struct notifier_block *nb, unsigned long event_id, void *report) |
| * |
| */ |
| |
| #define dev_fmt(fmt) "SCMI Notifications - " fmt |
| #define pr_fmt(fmt) "SCMI Notifications - " fmt |
| |
| #include <linux/bitfield.h> |
| #include <linux/bug.h> |
| #include <linux/compiler.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/hashtable.h> |
| #include <linux/kernel.h> |
| #include <linux/ktime.h> |
| #include <linux/kfifo.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/notifier.h> |
| #include <linux/refcount.h> |
| #include <linux/scmi_protocol.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| |
| #include "notify.h" |
| |
| #define SCMI_MAX_PROTO 256 |
| |
| #define PROTO_ID_MASK GENMASK(31, 24) |
| #define EVT_ID_MASK GENMASK(23, 16) |
| #define SRC_ID_MASK GENMASK(15, 0) |
| |
| /* |
| * Builds an unsigned 32bit key from the given input tuple to be used |
| * as a key in hashtables. |
| */ |
| #define MAKE_HASH_KEY(p, e, s) \ |
| (FIELD_PREP(PROTO_ID_MASK, (p)) | \ |
| FIELD_PREP(EVT_ID_MASK, (e)) | \ |
| FIELD_PREP(SRC_ID_MASK, (s))) |
| |
| #define MAKE_ALL_SRCS_KEY(p, e) MAKE_HASH_KEY((p), (e), SRC_ID_MASK) |
| |
| /* |
| * Assumes that the stored obj includes its own hash-key in a field named 'key': |
| * with this simplification this macro can be equally used for all the objects' |
| * types hashed by this implementation. |
| * |
| * @__ht: The hashtable name |
| * @__obj: A pointer to the object type to be retrieved from the hashtable; |
| * it will be used as a cursor while scanning the hastable and it will |
| * be possibly left as NULL when @__k is not found |
| * @__k: The key to search for |
| */ |
| #define KEY_FIND(__ht, __obj, __k) \ |
| ({ \ |
| typeof(__k) k_ = __k; \ |
| typeof(__obj) obj_; \ |
| \ |
| hash_for_each_possible((__ht), obj_, hash, k_) \ |
| if (obj_->key == k_) \ |
| break; \ |
| __obj = obj_; \ |
| }) |
| |
| #define KEY_XTRACT_PROTO_ID(key) FIELD_GET(PROTO_ID_MASK, (key)) |
| #define KEY_XTRACT_EVT_ID(key) FIELD_GET(EVT_ID_MASK, (key)) |
| #define KEY_XTRACT_SRC_ID(key) FIELD_GET(SRC_ID_MASK, (key)) |
| |
| /* |
| * A set of macros used to access safely @registered_protocols and |
| * @registered_events arrays; these are fixed in size and each entry is possibly |
| * populated at protocols' registration time and then only read but NEVER |
| * modified or removed. |
| */ |
| #define SCMI_GET_PROTO(__ni, __pid) \ |
| ({ \ |
| typeof(__ni) ni_ = __ni; \ |
| struct scmi_registered_events_desc *__pd = NULL; \ |
| \ |
| if (ni_) \ |
| __pd = READ_ONCE(ni_->registered_protocols[(__pid)]); \ |
| __pd; \ |
| }) |
| |
| #define SCMI_GET_REVT_FROM_PD(__pd, __eid) \ |
| ({ \ |
| typeof(__pd) pd_ = __pd; \ |
| typeof(__eid) eid_ = __eid; \ |
| struct scmi_registered_event *__revt = NULL; \ |
| \ |
| if (pd_ && eid_ < pd_->num_events) \ |
| __revt = READ_ONCE(pd_->registered_events[eid_]); \ |
| __revt; \ |
| }) |
| |
| #define SCMI_GET_REVT(__ni, __pid, __eid) \ |
| ({ \ |
| struct scmi_registered_event *__revt; \ |
| struct scmi_registered_events_desc *__pd; \ |
| \ |
| __pd = SCMI_GET_PROTO((__ni), (__pid)); \ |
| __revt = SCMI_GET_REVT_FROM_PD(__pd, (__eid)); \ |
| __revt; \ |
| }) |
| |
| /* A couple of utility macros to limit cruft when calling protocols' helpers */ |
| #define REVT_NOTIFY_SET_STATUS(revt, eid, sid, state) \ |
| ({ \ |
| typeof(revt) r = revt; \ |
| r->proto->ops->set_notify_enabled(r->proto->ni->handle, \ |
| (eid), (sid), (state)); \ |
| }) |
| |
| #define REVT_NOTIFY_ENABLE(revt, eid, sid) \ |
| REVT_NOTIFY_SET_STATUS((revt), (eid), (sid), true) |
| |
| #define REVT_NOTIFY_DISABLE(revt, eid, sid) \ |
| REVT_NOTIFY_SET_STATUS((revt), (eid), (sid), false) |
| |
| #define REVT_FILL_REPORT(revt, ...) \ |
| ({ \ |
| typeof(revt) r = revt; \ |
| r->proto->ops->fill_custom_report(r->proto->ni->handle, \ |
| __VA_ARGS__); \ |
| }) |
| |
| #define SCMI_PENDING_HASH_SZ 4 |
| #define SCMI_REGISTERED_HASH_SZ 6 |
| |
| struct scmi_registered_events_desc; |
| |
| /** |
| * struct scmi_notify_instance - Represents an instance of the notification |
| * core |
| * @gid: GroupID used for devres |
| * @handle: A reference to the platform instance |
| * @init_work: A work item to perform final initializations of pending handlers |
| * @notify_wq: A reference to the allocated Kernel cmwq |
| * @pending_mtx: A mutex to protect @pending_events_handlers |
| * @registered_protocols: A statically allocated array containing pointers to |
| * all the registered protocol-level specific information |
| * related to events' handling |
| * @pending_events_handlers: An hashtable containing all pending events' |
| * handlers descriptors |
| * |
| * Each platform instance, represented by a handle, has its own instance of |
| * the notification subsystem represented by this structure. |
| */ |
| struct scmi_notify_instance { |
| void *gid; |
| struct scmi_handle *handle; |
| struct work_struct init_work; |
| struct workqueue_struct *notify_wq; |
| /* lock to protect pending_events_handlers */ |
| struct mutex pending_mtx; |
| struct scmi_registered_events_desc **registered_protocols; |
| DECLARE_HASHTABLE(pending_events_handlers, SCMI_PENDING_HASH_SZ); |
| }; |
| |
| /** |
| * struct events_queue - Describes a queue and its associated worker |
| * @sz: Size in bytes of the related kfifo |
| * @kfifo: A dedicated Kernel kfifo descriptor |
| * @notify_work: A custom work item bound to this queue |
| * @wq: A reference to the associated workqueue |
| * |
| * Each protocol has its own dedicated events_queue descriptor. |
| */ |
| struct events_queue { |
| size_t sz; |
| struct kfifo kfifo; |
| struct work_struct notify_work; |
| struct workqueue_struct *wq; |
| }; |
| |
| /** |
| * struct scmi_event_header - A utility header |
| * @timestamp: The timestamp, in nanoseconds (boottime), which was associated |
| * to this event as soon as it entered the SCMI RX ISR |
| * @payld_sz: Effective size of the embedded message payload which follows |
| * @evt_id: Event ID (corresponds to the Event MsgID for this Protocol) |
| * @payld: A reference to the embedded event payload |
| * |
| * This header is prepended to each received event message payload before |
| * queueing it on the related &struct events_queue. |
| */ |
| struct scmi_event_header { |
| ktime_t timestamp; |
| size_t payld_sz; |
| unsigned char evt_id; |
| unsigned char payld[]; |
| }; |
| |
| struct scmi_registered_event; |
| |
| /** |
| * struct scmi_registered_events_desc - Protocol Specific information |
| * @id: Protocol ID |
| * @ops: Protocol specific and event-related operations |
| * @equeue: The embedded per-protocol events_queue |
| * @ni: A reference to the initialized instance descriptor |
| * @eh: A reference to pre-allocated buffer to be used as a scratch area by the |
| * deferred worker when fetching data from the kfifo |
| * @eh_sz: Size of the pre-allocated buffer @eh |
| * @in_flight: A reference to an in flight &struct scmi_registered_event |
| * @num_events: Number of events in @registered_events |
| * @registered_events: A dynamically allocated array holding all the registered |
| * events' descriptors, whose fixed-size is determined at |
| * compile time. |
| * @registered_mtx: A mutex to protect @registered_events_handlers |
| * @registered_events_handlers: An hashtable containing all events' handlers |
| * descriptors registered for this protocol |
| * |
| * All protocols that register at least one event have their protocol-specific |
| * information stored here, together with the embedded allocated events_queue. |
| * These descriptors are stored in the @registered_protocols array at protocol |
| * registration time. |
| * |
| * Once these descriptors are successfully registered, they are NEVER again |
| * removed or modified since protocols do not unregister ever, so that, once |
| * we safely grab a NON-NULL reference from the array we can keep it and use it. |
| */ |
| struct scmi_registered_events_desc { |
| u8 id; |
| const struct scmi_event_ops *ops; |
| struct events_queue equeue; |
| struct scmi_notify_instance *ni; |
| struct scmi_event_header *eh; |
| size_t eh_sz; |
| void *in_flight; |
| int num_events; |
| struct scmi_registered_event **registered_events; |
| /* mutex to protect registered_events_handlers */ |
| struct mutex registered_mtx; |
| DECLARE_HASHTABLE(registered_events_handlers, SCMI_REGISTERED_HASH_SZ); |
| }; |
| |
| /** |
| * struct scmi_registered_event - Event Specific Information |
| * @proto: A reference to the associated protocol descriptor |
| * @evt: A reference to the associated event descriptor (as provided at |
| * registration time) |
| * @report: A pre-allocated buffer used by the deferred worker to fill a |
| * customized event report |
| * @num_sources: The number of possible sources for this event as stated at |
| * events' registration time |
| * @sources: A reference to a dynamically allocated array used to refcount the |
| * events' enable requests for all the existing sources |
| * @sources_mtx: A mutex to serialize the access to @sources |
| * |
| * All registered events are represented by one of these structures that are |
| * stored in the @registered_events array at protocol registration time. |
| * |
| * Once these descriptors are successfully registered, they are NEVER again |
| * removed or modified since protocols do not unregister ever, so that once we |
| * safely grab a NON-NULL reference from the table we can keep it and use it. |
| */ |
| struct scmi_registered_event { |
| struct scmi_registered_events_desc *proto; |
| const struct scmi_event *evt; |
| void *report; |
| u32 num_sources; |
| refcount_t *sources; |
| /* locking to serialize the access to sources */ |
| struct mutex sources_mtx; |
| }; |
| |
| /** |
| * struct scmi_event_handler - Event handler information |
| * @key: The used hashkey |
| * @users: A reference count for number of active users for this handler |
| * @r_evt: A reference to the associated registered event; when this is NULL |
| * this handler is pending, which means that identifies a set of |
| * callbacks intended to be attached to an event which is still not |
| * known nor registered by any protocol at that point in time |
| * @chain: The notification chain dedicated to this specific event tuple |
| * @hash: The hlist_node used for collision handling |
| * @enabled: A boolean which records if event's generation has been already |
| * enabled for this handler as a whole |
| * |
| * This structure collects all the information needed to process a received |
| * event identified by the tuple (proto_id, evt_id, src_id). |
| * These descriptors are stored in a per-protocol @registered_events_handlers |
| * table using as a key a value derived from that tuple. |
| */ |
| struct scmi_event_handler { |
| u32 key; |
| refcount_t users; |
| struct scmi_registered_event *r_evt; |
| struct blocking_notifier_head chain; |
| struct hlist_node hash; |
| bool enabled; |
| }; |
| |
| #define IS_HNDL_PENDING(hndl) (!(hndl)->r_evt) |
| |
| static struct scmi_event_handler * |
| scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key); |
| static void scmi_put_active_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl); |
| static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl); |
| |
| /** |
| * scmi_lookup_and_call_event_chain() - Lookup the proper chain and call it |
| * @ni: A reference to the notification instance to use |
| * @evt_key: The key to use to lookup the related notification chain |
| * @report: The customized event-specific report to pass down to the callbacks |
| * as their *data parameter. |
| */ |
| static inline void |
| scmi_lookup_and_call_event_chain(struct scmi_notify_instance *ni, |
| u32 evt_key, void *report) |
| { |
| int ret; |
| struct scmi_event_handler *hndl; |
| |
| /* |
| * Here ensure the event handler cannot vanish while using it. |
| * It is legitimate, though, for an handler not to be found at all here, |
| * e.g. when it has been unregistered by the user after some events had |
| * already been queued. |
| */ |
| hndl = scmi_get_active_handler(ni, evt_key); |
| if (!hndl) |
| return; |
| |
| ret = blocking_notifier_call_chain(&hndl->chain, |
| KEY_XTRACT_EVT_ID(evt_key), |
| report); |
| /* Notifiers are NOT supposed to cut the chain ... */ |
| WARN_ON_ONCE(ret & NOTIFY_STOP_MASK); |
| |
| scmi_put_active_handler(ni, hndl); |
| } |
| |
| /** |
| * scmi_process_event_header() - Dequeue and process an event header |
| * @eq: The queue to use |
| * @pd: The protocol descriptor to use |
| * |
| * Read an event header from the protocol queue into the dedicated scratch |
| * buffer and looks for a matching registered event; in case an anomalously |
| * sized read is detected just flush the queue. |
| * |
| * Return: |
| * * a reference to the matching registered event when found |
| * * ERR_PTR(-EINVAL) when NO registered event could be found |
| * * NULL when the queue is empty |
| */ |
| static inline struct scmi_registered_event * |
| scmi_process_event_header(struct events_queue *eq, |
| struct scmi_registered_events_desc *pd) |
| { |
| unsigned int outs; |
| struct scmi_registered_event *r_evt; |
| |
| outs = kfifo_out(&eq->kfifo, pd->eh, |
| sizeof(struct scmi_event_header)); |
| if (!outs) |
| return NULL; |
| if (outs != sizeof(struct scmi_event_header)) { |
| dev_err(pd->ni->handle->dev, "corrupted EVT header. Flush.\n"); |
| kfifo_reset_out(&eq->kfifo); |
| return NULL; |
| } |
| |
| r_evt = SCMI_GET_REVT_FROM_PD(pd, pd->eh->evt_id); |
| if (!r_evt) |
| r_evt = ERR_PTR(-EINVAL); |
| |
| return r_evt; |
| } |
| |
| /** |
| * scmi_process_event_payload() - Dequeue and process an event payload |
| * @eq: The queue to use |
| * @pd: The protocol descriptor to use |
| * @r_evt: The registered event descriptor to use |
| * |
| * Read an event payload from the protocol queue into the dedicated scratch |
| * buffer, fills a custom report and then look for matching event handlers and |
| * call them; skip any unknown event (as marked by scmi_process_event_header()) |
| * and in case an anomalously sized read is detected just flush the queue. |
| * |
| * Return: False when the queue is empty |
| */ |
| static inline bool |
| scmi_process_event_payload(struct events_queue *eq, |
| struct scmi_registered_events_desc *pd, |
| struct scmi_registered_event *r_evt) |
| { |
| u32 src_id, key; |
| unsigned int outs; |
| void *report = NULL; |
| |
| outs = kfifo_out(&eq->kfifo, pd->eh->payld, pd->eh->payld_sz); |
| if (!outs) |
| return false; |
| |
| /* Any in-flight event has now been officially processed */ |
| pd->in_flight = NULL; |
| |
| if (outs != pd->eh->payld_sz) { |
| dev_err(pd->ni->handle->dev, "corrupted EVT Payload. Flush.\n"); |
| kfifo_reset_out(&eq->kfifo); |
| return false; |
| } |
| |
| if (IS_ERR(r_evt)) { |
| dev_warn(pd->ni->handle->dev, |
| "SKIP UNKNOWN EVT - proto:%X evt:%d\n", |
| pd->id, pd->eh->evt_id); |
| return true; |
| } |
| |
| report = REVT_FILL_REPORT(r_evt, pd->eh->evt_id, pd->eh->timestamp, |
| pd->eh->payld, pd->eh->payld_sz, |
| r_evt->report, &src_id); |
| if (!report) { |
| dev_err(pd->ni->handle->dev, |
| "report not available - proto:%X evt:%d\n", |
| pd->id, pd->eh->evt_id); |
| return true; |
| } |
| |
| /* At first search for a generic ALL src_ids handler... */ |
| key = MAKE_ALL_SRCS_KEY(pd->id, pd->eh->evt_id); |
| scmi_lookup_and_call_event_chain(pd->ni, key, report); |
| |
| /* ...then search for any specific src_id */ |
| key = MAKE_HASH_KEY(pd->id, pd->eh->evt_id, src_id); |
| scmi_lookup_and_call_event_chain(pd->ni, key, report); |
| |
| return true; |
| } |
| |
| /** |
| * scmi_events_dispatcher() - Common worker logic for all work items. |
| * @work: The work item to use, which is associated to a dedicated events_queue |
| * |
| * Logic: |
| * 1. dequeue one pending RX notification (queued in SCMI RX ISR context) |
| * 2. generate a custom event report from the received event message |
| * 3. lookup for any registered ALL_SRC_IDs handler: |
| * - > call the related notification chain passing in the report |
| * 4. lookup for any registered specific SRC_ID handler: |
| * - > call the related notification chain passing in the report |
| * |
| * Note that: |
| * * a dedicated per-protocol kfifo queue is used: in this way an anomalous |
| * flood of events cannot saturate other protocols' queues. |
| * * each per-protocol queue is associated to a distinct work_item, which |
| * means, in turn, that: |
| * + all protocols can process their dedicated queues concurrently |
| * (since notify_wq:max_active != 1) |
| * + anyway at most one worker instance is allowed to run on the same queue |
| * concurrently: this ensures that we can have only one concurrent |
| * reader/writer on the associated kfifo, so that we can use it lock-less |
| * |
| * Context: Process context. |
| */ |
| static void scmi_events_dispatcher(struct work_struct *work) |
| { |
| struct events_queue *eq; |
| struct scmi_registered_events_desc *pd; |
| struct scmi_registered_event *r_evt; |
| |
| eq = container_of(work, struct events_queue, notify_work); |
| pd = container_of(eq, struct scmi_registered_events_desc, equeue); |
| /* |
| * In order to keep the queue lock-less and the number of memcopies |
| * to the bare minimum needed, the dispatcher accounts for the |
| * possibility of per-protocol in-flight events: i.e. an event whose |
| * reception could end up being split across two subsequent runs of this |
| * worker, first the header, then the payload. |
| */ |
| do { |
| if (!pd->in_flight) { |
| r_evt = scmi_process_event_header(eq, pd); |
| if (!r_evt) |
| break; |
| pd->in_flight = r_evt; |
| } else { |
| r_evt = pd->in_flight; |
| } |
| } while (scmi_process_event_payload(eq, pd, r_evt)); |
| } |
| |
| /** |
| * scmi_notify() - Queues a notification for further deferred processing |
| * @handle: The handle identifying the platform instance from which the |
| * dispatched event is generated |
| * @proto_id: Protocol ID |
| * @evt_id: Event ID (msgID) |
| * @buf: Event Message Payload (without the header) |
| * @len: Event Message Payload size |
| * @ts: RX Timestamp in nanoseconds (boottime) |
| * |
| * Context: Called in interrupt context to queue a received event for |
| * deferred processing. |
| * |
| * Return: 0 on Success |
| */ |
| int scmi_notify(const struct scmi_handle *handle, u8 proto_id, u8 evt_id, |
| const void *buf, size_t len, ktime_t ts) |
| { |
| struct scmi_registered_event *r_evt; |
| struct scmi_event_header eh; |
| struct scmi_notify_instance *ni; |
| |
| /* Ensure notify_priv is updated */ |
| smp_rmb(); |
| if (!handle->notify_priv) |
| return 0; |
| ni = handle->notify_priv; |
| |
| r_evt = SCMI_GET_REVT(ni, proto_id, evt_id); |
| if (!r_evt) |
| return -EINVAL; |
| |
| if (len > r_evt->evt->max_payld_sz) { |
| dev_err(handle->dev, "discard badly sized message\n"); |
| return -EINVAL; |
| } |
| if (kfifo_avail(&r_evt->proto->equeue.kfifo) < sizeof(eh) + len) { |
| dev_warn(handle->dev, |
| "queue full, dropping proto_id:%d evt_id:%d ts:%lld\n", |
| proto_id, evt_id, ktime_to_ns(ts)); |
| return -ENOMEM; |
| } |
| |
| eh.timestamp = ts; |
| eh.evt_id = evt_id; |
| eh.payld_sz = len; |
| /* |
| * Header and payload are enqueued with two distinct kfifo_in() (so non |
| * atomic), but this situation is handled properly on the consumer side |
| * with in-flight events tracking. |
| */ |
| kfifo_in(&r_evt->proto->equeue.kfifo, &eh, sizeof(eh)); |
| kfifo_in(&r_evt->proto->equeue.kfifo, buf, len); |
| /* |
| * Don't care about return value here since we just want to ensure that |
| * a work is queued all the times whenever some items have been pushed |
| * on the kfifo: |
| * - if work was already queued it will simply fail to queue a new one |
| * since it is not needed |
| * - if work was not queued already it will be now, even in case work |
| * was in fact already running: this behavior avoids any possible race |
| * when this function pushes new items onto the kfifos after the |
| * related executing worker had already determined the kfifo to be |
| * empty and it was terminating. |
| */ |
| queue_work(r_evt->proto->equeue.wq, |
| &r_evt->proto->equeue.notify_work); |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_kfifo_free() - Devres action helper to free the kfifo |
| * @kfifo: The kfifo to free |
| */ |
| static void scmi_kfifo_free(void *kfifo) |
| { |
| kfifo_free((struct kfifo *)kfifo); |
| } |
| |
| /** |
| * scmi_initialize_events_queue() - Allocate/Initialize a kfifo buffer |
| * @ni: A reference to the notification instance to use |
| * @equeue: The events_queue to initialize |
| * @sz: Size of the kfifo buffer to allocate |
| * |
| * Allocate a buffer for the kfifo and initialize it. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_initialize_events_queue(struct scmi_notify_instance *ni, |
| struct events_queue *equeue, size_t sz) |
| { |
| int ret; |
| |
| if (kfifo_alloc(&equeue->kfifo, sz, GFP_KERNEL)) |
| return -ENOMEM; |
| /* Size could have been roundup to power-of-two */ |
| equeue->sz = kfifo_size(&equeue->kfifo); |
| |
| ret = devm_add_action_or_reset(ni->handle->dev, scmi_kfifo_free, |
| &equeue->kfifo); |
| if (ret) |
| return ret; |
| |
| INIT_WORK(&equeue->notify_work, scmi_events_dispatcher); |
| equeue->wq = ni->notify_wq; |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_allocate_registered_events_desc() - Allocate a registered events' |
| * descriptor |
| * @ni: A reference to the &struct scmi_notify_instance notification instance |
| * to use |
| * @proto_id: Protocol ID |
| * @queue_sz: Size of the associated queue to allocate |
| * @eh_sz: Size of the event header scratch area to pre-allocate |
| * @num_events: Number of events to support (size of @registered_events) |
| * @ops: Pointer to a struct holding references to protocol specific helpers |
| * needed during events handling |
| * |
| * It is supposed to be called only once for each protocol at protocol |
| * initialization time, so it warns if the requested protocol is found already |
| * registered. |
| * |
| * Return: The allocated and registered descriptor on Success |
| */ |
| static struct scmi_registered_events_desc * |
| scmi_allocate_registered_events_desc(struct scmi_notify_instance *ni, |
| u8 proto_id, size_t queue_sz, size_t eh_sz, |
| int num_events, |
| const struct scmi_event_ops *ops) |
| { |
| int ret; |
| struct scmi_registered_events_desc *pd; |
| |
| /* Ensure protocols are up to date */ |
| smp_rmb(); |
| if (WARN_ON(ni->registered_protocols[proto_id])) |
| return ERR_PTR(-EINVAL); |
| |
| pd = devm_kzalloc(ni->handle->dev, sizeof(*pd), GFP_KERNEL); |
| if (!pd) |
| return ERR_PTR(-ENOMEM); |
| pd->id = proto_id; |
| pd->ops = ops; |
| pd->ni = ni; |
| |
| ret = scmi_initialize_events_queue(ni, &pd->equeue, queue_sz); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| pd->eh = devm_kzalloc(ni->handle->dev, eh_sz, GFP_KERNEL); |
| if (!pd->eh) |
| return ERR_PTR(-ENOMEM); |
| pd->eh_sz = eh_sz; |
| |
| pd->registered_events = devm_kcalloc(ni->handle->dev, num_events, |
| sizeof(char *), GFP_KERNEL); |
| if (!pd->registered_events) |
| return ERR_PTR(-ENOMEM); |
| pd->num_events = num_events; |
| |
| /* Initialize per protocol handlers table */ |
| mutex_init(&pd->registered_mtx); |
| hash_init(pd->registered_events_handlers); |
| |
| return pd; |
| } |
| |
| /** |
| * scmi_register_protocol_events() - Register Protocol Events with the core |
| * @handle: The handle identifying the platform instance against which the |
| * the protocol's events are registered |
| * @proto_id: Protocol ID |
| * @queue_sz: Size in bytes of the associated queue to be allocated |
| * @ops: Protocol specific event-related operations |
| * @evt: Event descriptor array |
| * @num_events: Number of events in @evt array |
| * @num_sources: Number of possible sources for this protocol on this |
| * platform. |
| * |
| * Used by SCMI Protocols initialization code to register with the notification |
| * core the list of supported events and their descriptors: takes care to |
| * pre-allocate and store all needed descriptors, scratch buffers and event |
| * queues. |
| * |
| * Return: 0 on Success |
| */ |
| int scmi_register_protocol_events(const struct scmi_handle *handle, |
| u8 proto_id, size_t queue_sz, |
| const struct scmi_event_ops *ops, |
| const struct scmi_event *evt, int num_events, |
| int num_sources) |
| { |
| int i; |
| size_t payld_sz = 0; |
| struct scmi_registered_events_desc *pd; |
| struct scmi_notify_instance *ni; |
| |
| if (!ops || !evt) |
| return -EINVAL; |
| |
| /* Ensure notify_priv is updated */ |
| smp_rmb(); |
| if (!handle->notify_priv) |
| return -ENOMEM; |
| ni = handle->notify_priv; |
| |
| /* Attach to the notification main devres group */ |
| if (!devres_open_group(ni->handle->dev, ni->gid, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_events; i++) |
| payld_sz = max_t(size_t, payld_sz, evt[i].max_payld_sz); |
| payld_sz += sizeof(struct scmi_event_header); |
| |
| pd = scmi_allocate_registered_events_desc(ni, proto_id, queue_sz, |
| payld_sz, num_events, ops); |
| if (IS_ERR(pd)) |
| goto err; |
| |
| for (i = 0; i < num_events; i++, evt++) { |
| struct scmi_registered_event *r_evt; |
| |
| r_evt = devm_kzalloc(ni->handle->dev, sizeof(*r_evt), |
| GFP_KERNEL); |
| if (!r_evt) |
| goto err; |
| r_evt->proto = pd; |
| r_evt->evt = evt; |
| |
| r_evt->sources = devm_kcalloc(ni->handle->dev, num_sources, |
| sizeof(refcount_t), GFP_KERNEL); |
| if (!r_evt->sources) |
| goto err; |
| r_evt->num_sources = num_sources; |
| mutex_init(&r_evt->sources_mtx); |
| |
| r_evt->report = devm_kzalloc(ni->handle->dev, |
| evt->max_report_sz, GFP_KERNEL); |
| if (!r_evt->report) |
| goto err; |
| |
| pd->registered_events[i] = r_evt; |
| /* Ensure events are updated */ |
| smp_wmb(); |
| dev_dbg(handle->dev, "registered event - %lX\n", |
| MAKE_ALL_SRCS_KEY(r_evt->proto->id, r_evt->evt->id)); |
| } |
| |
| /* Register protocol and events...it will never be removed */ |
| ni->registered_protocols[proto_id] = pd; |
| /* Ensure protocols are updated */ |
| smp_wmb(); |
| |
| devres_close_group(ni->handle->dev, ni->gid); |
| |
| /* |
| * Finalize any pending events' handler which could have been waiting |
| * for this protocol's events registration. |
| */ |
| schedule_work(&ni->init_work); |
| |
| return 0; |
| |
| err: |
| dev_warn(handle->dev, "Proto:%X - Registration Failed !\n", proto_id); |
| /* A failing protocol registration does not trigger full failure */ |
| devres_close_group(ni->handle->dev, ni->gid); |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * scmi_allocate_event_handler() - Allocate Event handler |
| * @ni: A reference to the notification instance to use |
| * @evt_key: 32bit key uniquely bind to the event identified by the tuple |
| * (proto_id, evt_id, src_id) |
| * |
| * Allocate an event handler and related notification chain associated with |
| * the provided event handler key. |
| * Note that, at this point, a related registered_event is still to be |
| * associated to this handler descriptor (hndl->r_evt == NULL), so the handler |
| * is initialized as pending. |
| * |
| * Context: Assumes to be called with @pending_mtx already acquired. |
| * Return: the freshly allocated structure on Success |
| */ |
| static struct scmi_event_handler * |
| scmi_allocate_event_handler(struct scmi_notify_instance *ni, u32 evt_key) |
| { |
| struct scmi_event_handler *hndl; |
| |
| hndl = kzalloc(sizeof(*hndl), GFP_KERNEL); |
| if (!hndl) |
| return NULL; |
| hndl->key = evt_key; |
| BLOCKING_INIT_NOTIFIER_HEAD(&hndl->chain); |
| refcount_set(&hndl->users, 1); |
| /* New handlers are created pending */ |
| hash_add(ni->pending_events_handlers, &hndl->hash, hndl->key); |
| |
| return hndl; |
| } |
| |
| /** |
| * scmi_free_event_handler() - Free the provided Event handler |
| * @hndl: The event handler structure to free |
| * |
| * Context: Assumes to be called with proper locking acquired depending |
| * on the situation. |
| */ |
| static void scmi_free_event_handler(struct scmi_event_handler *hndl) |
| { |
| hash_del(&hndl->hash); |
| kfree(hndl); |
| } |
| |
| /** |
| * scmi_bind_event_handler() - Helper to attempt binding an handler to an event |
| * @ni: A reference to the notification instance to use |
| * @hndl: The event handler to bind |
| * |
| * If an associated registered event is found, move the handler from the pending |
| * into the registered table. |
| * |
| * Context: Assumes to be called with @pending_mtx already acquired. |
| * |
| * Return: 0 on Success |
| */ |
| static inline int scmi_bind_event_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| struct scmi_registered_event *r_evt; |
| |
| r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(hndl->key), |
| KEY_XTRACT_EVT_ID(hndl->key)); |
| if (!r_evt) |
| return -EINVAL; |
| |
| /* Remove from pending and insert into registered */ |
| hash_del(&hndl->hash); |
| hndl->r_evt = r_evt; |
| mutex_lock(&r_evt->proto->registered_mtx); |
| hash_add(r_evt->proto->registered_events_handlers, |
| &hndl->hash, hndl->key); |
| mutex_unlock(&r_evt->proto->registered_mtx); |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_valid_pending_handler() - Helper to check pending status of handlers |
| * @ni: A reference to the notification instance to use |
| * @hndl: The event handler to check |
| * |
| * An handler is considered pending when its r_evt == NULL, because the related |
| * event was still unknown at handler's registration time; anyway, since all |
| * protocols register their supported events once for all at protocols' |
| * initialization time, a pending handler cannot be considered valid anymore if |
| * the underlying event (which it is waiting for), belongs to an already |
| * initialized and registered protocol. |
| * |
| * Return: 0 on Success |
| */ |
| static inline int scmi_valid_pending_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| struct scmi_registered_events_desc *pd; |
| |
| if (!IS_HNDL_PENDING(hndl)) |
| return -EINVAL; |
| |
| pd = SCMI_GET_PROTO(ni, KEY_XTRACT_PROTO_ID(hndl->key)); |
| if (pd) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_register_event_handler() - Register whenever possible an Event handler |
| * @ni: A reference to the notification instance to use |
| * @hndl: The event handler to register |
| * |
| * At first try to bind an event handler to its associated event, then check if |
| * it was at least a valid pending handler: if it was not bound nor valid return |
| * false. |
| * |
| * Valid pending incomplete bindings will be periodically retried by a dedicated |
| * worker which is kicked each time a new protocol completes its own |
| * registration phase. |
| * |
| * Context: Assumes to be called with @pending_mtx acquired. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_register_event_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| int ret; |
| |
| ret = scmi_bind_event_handler(ni, hndl); |
| if (!ret) { |
| dev_dbg(ni->handle->dev, "registered NEW handler - key:%X\n", |
| hndl->key); |
| } else { |
| ret = scmi_valid_pending_handler(ni, hndl); |
| if (!ret) |
| dev_dbg(ni->handle->dev, |
| "registered PENDING handler - key:%X\n", |
| hndl->key); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * __scmi_event_handler_get_ops() - Utility to get or create an event handler |
| * @ni: A reference to the notification instance to use |
| * @evt_key: The event key to use |
| * @create: A boolean flag to specify if a handler must be created when |
| * not already existent |
| * |
| * Search for the desired handler matching the key in both the per-protocol |
| * registered table and the common pending table: |
| * * if found adjust users refcount |
| * * if not found and @create is true, create and register the new handler: |
| * handler could end up being registered as pending if no matching event |
| * could be found. |
| * |
| * An handler is guaranteed to reside in one and only one of the tables at |
| * any one time; to ensure this the whole search and create is performed |
| * holding the @pending_mtx lock, with @registered_mtx additionally acquired |
| * if needed. |
| * |
| * Note that when a nested acquisition of these mutexes is needed the locking |
| * order is always (same as in @init_work): |
| * 1. pending_mtx |
| * 2. registered_mtx |
| * |
| * Events generation is NOT enabled right after creation within this routine |
| * since at creation time we usually want to have all setup and ready before |
| * events really start flowing. |
| * |
| * Return: A properly refcounted handler on Success, NULL on Failure |
| */ |
| static inline struct scmi_event_handler * |
| __scmi_event_handler_get_ops(struct scmi_notify_instance *ni, |
| u32 evt_key, bool create) |
| { |
| struct scmi_registered_event *r_evt; |
| struct scmi_event_handler *hndl = NULL; |
| |
| r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key), |
| KEY_XTRACT_EVT_ID(evt_key)); |
| |
| mutex_lock(&ni->pending_mtx); |
| /* Search registered events at first ... if possible at all */ |
| if (r_evt) { |
| mutex_lock(&r_evt->proto->registered_mtx); |
| hndl = KEY_FIND(r_evt->proto->registered_events_handlers, |
| hndl, evt_key); |
| if (hndl) |
| refcount_inc(&hndl->users); |
| mutex_unlock(&r_evt->proto->registered_mtx); |
| } |
| |
| /* ...then amongst pending. */ |
| if (!hndl) { |
| hndl = KEY_FIND(ni->pending_events_handlers, hndl, evt_key); |
| if (hndl) |
| refcount_inc(&hndl->users); |
| } |
| |
| /* Create if still not found and required */ |
| if (!hndl && create) { |
| hndl = scmi_allocate_event_handler(ni, evt_key); |
| if (hndl && scmi_register_event_handler(ni, hndl)) { |
| dev_dbg(ni->handle->dev, |
| "purging UNKNOWN handler - key:%X\n", |
| hndl->key); |
| /* this hndl can be only a pending one */ |
| scmi_put_handler_unlocked(ni, hndl); |
| hndl = NULL; |
| } |
| } |
| mutex_unlock(&ni->pending_mtx); |
| |
| return hndl; |
| } |
| |
| static struct scmi_event_handler * |
| scmi_get_handler(struct scmi_notify_instance *ni, u32 evt_key) |
| { |
| return __scmi_event_handler_get_ops(ni, evt_key, false); |
| } |
| |
| static struct scmi_event_handler * |
| scmi_get_or_create_handler(struct scmi_notify_instance *ni, u32 evt_key) |
| { |
| return __scmi_event_handler_get_ops(ni, evt_key, true); |
| } |
| |
| /** |
| * scmi_get_active_handler() - Helper to get active handlers only |
| * @ni: A reference to the notification instance to use |
| * @evt_key: The event key to use |
| * |
| * Search for the desired handler matching the key only in the per-protocol |
| * table of registered handlers: this is called only from the dispatching path |
| * so want to be as quick as possible and do not care about pending. |
| * |
| * Return: A properly refcounted active handler |
| */ |
| static struct scmi_event_handler * |
| scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key) |
| { |
| struct scmi_registered_event *r_evt; |
| struct scmi_event_handler *hndl = NULL; |
| |
| r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key), |
| KEY_XTRACT_EVT_ID(evt_key)); |
| if (r_evt) { |
| mutex_lock(&r_evt->proto->registered_mtx); |
| hndl = KEY_FIND(r_evt->proto->registered_events_handlers, |
| hndl, evt_key); |
| if (hndl) |
| refcount_inc(&hndl->users); |
| mutex_unlock(&r_evt->proto->registered_mtx); |
| } |
| |
| return hndl; |
| } |
| |
| /** |
| * __scmi_enable_evt() - Enable/disable events generation |
| * @r_evt: The registered event to act upon |
| * @src_id: The src_id to act upon |
| * @enable: The action to perform: true->Enable, false->Disable |
| * |
| * Takes care of proper refcounting while performing enable/disable: handles |
| * the special case of ALL sources requests by itself. |
| * Returns successfully if at least one of the required src_id has been |
| * successfully enabled/disabled. |
| * |
| * Return: 0 on Success |
| */ |
| static inline int __scmi_enable_evt(struct scmi_registered_event *r_evt, |
| u32 src_id, bool enable) |
| { |
| int retvals = 0; |
| u32 num_sources; |
| refcount_t *sid; |
| |
| if (src_id == SRC_ID_MASK) { |
| src_id = 0; |
| num_sources = r_evt->num_sources; |
| } else if (src_id < r_evt->num_sources) { |
| num_sources = 1; |
| } else { |
| return -EINVAL; |
| } |
| |
| mutex_lock(&r_evt->sources_mtx); |
| if (enable) { |
| for (; num_sources; src_id++, num_sources--) { |
| int ret = 0; |
| |
| sid = &r_evt->sources[src_id]; |
| if (refcount_read(sid) == 0) { |
| ret = REVT_NOTIFY_ENABLE(r_evt, r_evt->evt->id, |
| src_id); |
| if (!ret) |
| refcount_set(sid, 1); |
| } else { |
| refcount_inc(sid); |
| } |
| retvals += !ret; |
| } |
| } else { |
| for (; num_sources; src_id++, num_sources--) { |
| sid = &r_evt->sources[src_id]; |
| if (refcount_dec_and_test(sid)) |
| REVT_NOTIFY_DISABLE(r_evt, |
| r_evt->evt->id, src_id); |
| } |
| retvals = 1; |
| } |
| mutex_unlock(&r_evt->sources_mtx); |
| |
| return retvals ? 0 : -EINVAL; |
| } |
| |
| static int scmi_enable_events(struct scmi_event_handler *hndl) |
| { |
| int ret = 0; |
| |
| if (!hndl->enabled) { |
| ret = __scmi_enable_evt(hndl->r_evt, |
| KEY_XTRACT_SRC_ID(hndl->key), true); |
| if (!ret) |
| hndl->enabled = true; |
| } |
| |
| return ret; |
| } |
| |
| static int scmi_disable_events(struct scmi_event_handler *hndl) |
| { |
| int ret = 0; |
| |
| if (hndl->enabled) { |
| ret = __scmi_enable_evt(hndl->r_evt, |
| KEY_XTRACT_SRC_ID(hndl->key), false); |
| if (!ret) |
| hndl->enabled = false; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_put_handler_unlocked() - Put an event handler |
| * @ni: A reference to the notification instance to use |
| * @hndl: The event handler to act upon |
| * |
| * After having got exclusive access to the registered handlers hashtable, |
| * update the refcount and if @hndl is no more in use by anyone: |
| * * ask for events' generation disabling |
| * * unregister and free the handler itself |
| * |
| * Context: Assumes all the proper locking has been managed by the caller. |
| */ |
| static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| if (refcount_dec_and_test(&hndl->users)) { |
| if (!IS_HNDL_PENDING(hndl)) |
| scmi_disable_events(hndl); |
| scmi_free_event_handler(hndl); |
| } |
| } |
| |
| static void scmi_put_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| struct scmi_registered_event *r_evt = hndl->r_evt; |
| |
| mutex_lock(&ni->pending_mtx); |
| if (r_evt) |
| mutex_lock(&r_evt->proto->registered_mtx); |
| |
| scmi_put_handler_unlocked(ni, hndl); |
| |
| if (r_evt) |
| mutex_unlock(&r_evt->proto->registered_mtx); |
| mutex_unlock(&ni->pending_mtx); |
| } |
| |
| static void scmi_put_active_handler(struct scmi_notify_instance *ni, |
| struct scmi_event_handler *hndl) |
| { |
| struct scmi_registered_event *r_evt = hndl->r_evt; |
| |
| mutex_lock(&r_evt->proto->registered_mtx); |
| scmi_put_handler_unlocked(ni, hndl); |
| mutex_unlock(&r_evt->proto->registered_mtx); |
| } |
| |
| /** |
| * scmi_event_handler_enable_events() - Enable events associated to an handler |
| * @hndl: The Event handler to act upon |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_event_handler_enable_events(struct scmi_event_handler *hndl) |
| { |
| if (scmi_enable_events(hndl)) { |
| pr_err("Failed to ENABLE events for key:%X !\n", hndl->key); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_register_notifier() - Register a notifier_block for an event |
| * @handle: The handle identifying the platform instance against which the |
| * callback is registered |
| * @proto_id: Protocol ID |
| * @evt_id: Event ID |
| * @src_id: Source ID, when NULL register for events coming form ALL possible |
| * sources |
| * @nb: A standard notifier block to register for the specified event |
| * |
| * Generic helper to register a notifier_block against a protocol event. |
| * |
| * A notifier_block @nb will be registered for each distinct event identified |
| * by the tuple (proto_id, evt_id, src_id) on a dedicated notification chain |
| * so that: |
| * |
| * (proto_X, evt_Y, src_Z) --> chain_X_Y_Z |
| * |
| * @src_id meaning is protocol specific and identifies the origin of the event |
| * (like domain_id, sensor_id and so forth). |
| * |
| * @src_id can be NULL to signify that the caller is interested in receiving |
| * notifications from ALL the available sources for that protocol OR simply that |
| * the protocol does not support distinct sources. |
| * |
| * As soon as one user for the specified tuple appears, an handler is created, |
| * and that specific event's generation is enabled at the platform level, unless |
| * an associated registered event is found missing, meaning that the needed |
| * protocol is still to be initialized and the handler has just been registered |
| * as still pending. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_register_notifier(const struct scmi_handle *handle, |
| u8 proto_id, u8 evt_id, u32 *src_id, |
| struct notifier_block *nb) |
| { |
| int ret = 0; |
| u32 evt_key; |
| struct scmi_event_handler *hndl; |
| struct scmi_notify_instance *ni; |
| |
| /* Ensure notify_priv is updated */ |
| smp_rmb(); |
| if (!handle->notify_priv) |
| return -ENODEV; |
| ni = handle->notify_priv; |
| |
| evt_key = MAKE_HASH_KEY(proto_id, evt_id, |
| src_id ? *src_id : SRC_ID_MASK); |
| hndl = scmi_get_or_create_handler(ni, evt_key); |
| if (!hndl) |
| return -EINVAL; |
| |
| blocking_notifier_chain_register(&hndl->chain, nb); |
| |
| /* Enable events for not pending handlers */ |
| if (!IS_HNDL_PENDING(hndl)) { |
| ret = scmi_event_handler_enable_events(hndl); |
| if (ret) |
| scmi_put_handler(ni, hndl); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_unregister_notifier() - Unregister a notifier_block for an event |
| * @handle: The handle identifying the platform instance against which the |
| * callback is unregistered |
| * @proto_id: Protocol ID |
| * @evt_id: Event ID |
| * @src_id: Source ID |
| * @nb: The notifier_block to unregister |
| * |
| * Takes care to unregister the provided @nb from the notification chain |
| * associated to the specified event and, if there are no more users for the |
| * event handler, frees also the associated event handler structures. |
| * (this could possibly cause disabling of event's generation at platform level) |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_unregister_notifier(const struct scmi_handle *handle, |
| u8 proto_id, u8 evt_id, u32 *src_id, |
| struct notifier_block *nb) |
| { |
| u32 evt_key; |
| struct scmi_event_handler *hndl; |
| struct scmi_notify_instance *ni; |
| |
| /* Ensure notify_priv is updated */ |
| smp_rmb(); |
| if (!handle->notify_priv) |
| return -ENODEV; |
| ni = handle->notify_priv; |
| |
| evt_key = MAKE_HASH_KEY(proto_id, evt_id, |
| src_id ? *src_id : SRC_ID_MASK); |
| hndl = scmi_get_handler(ni, evt_key); |
| if (!hndl) |
| return -EINVAL; |
| |
| /* |
| * Note that this chain unregistration call is safe on its own |
| * being internally protected by an rwsem. |
| */ |
| blocking_notifier_chain_unregister(&hndl->chain, nb); |
| scmi_put_handler(ni, hndl); |
| |
| /* |
| * This balances the initial get issued in @scmi_register_notifier. |
| * If this notifier_block happened to be the last known user callback |
| * for this event, the handler is here freed and the event's generation |
| * stopped. |
| * |
| * Note that, an ongoing concurrent lookup on the delivery workqueue |
| * path could still hold the refcount to 1 even after this routine |
| * completes: in such a case it will be the final put on the delivery |
| * path which will finally free this unused handler. |
| */ |
| scmi_put_handler(ni, hndl); |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_protocols_late_init() - Worker for late initialization |
| * @work: The work item to use associated to the proper SCMI instance |
| * |
| * This kicks in whenever a new protocol has completed its own registration via |
| * scmi_register_protocol_events(): it is in charge of scanning the table of |
| * pending handlers (registered by users while the related protocol was still |
| * not initialized) and finalizing their initialization whenever possible; |
| * invalid pending handlers are purged at this point in time. |
| */ |
| static void scmi_protocols_late_init(struct work_struct *work) |
| { |
| int bkt; |
| struct scmi_event_handler *hndl; |
| struct scmi_notify_instance *ni; |
| struct hlist_node *tmp; |
| |
| ni = container_of(work, struct scmi_notify_instance, init_work); |
| |
| /* Ensure protocols and events are up to date */ |
| smp_rmb(); |
| |
| mutex_lock(&ni->pending_mtx); |
| hash_for_each_safe(ni->pending_events_handlers, bkt, tmp, hndl, hash) { |
| int ret; |
| |
| ret = scmi_bind_event_handler(ni, hndl); |
| if (!ret) { |
| dev_dbg(ni->handle->dev, |
| "finalized PENDING handler - key:%X\n", |
| hndl->key); |
| ret = scmi_event_handler_enable_events(hndl); |
| } else { |
| ret = scmi_valid_pending_handler(ni, hndl); |
| } |
| if (ret) { |
| dev_dbg(ni->handle->dev, |
| "purging PENDING handler - key:%X\n", |
| hndl->key); |
| /* this hndl can be only a pending one */ |
| scmi_put_handler_unlocked(ni, hndl); |
| } |
| } |
| mutex_unlock(&ni->pending_mtx); |
| } |
| |
| /* |
| * notify_ops are attached to the handle so that can be accessed |
| * directly from an scmi_driver to register its own notifiers. |
| */ |
| static struct scmi_notify_ops notify_ops = { |
| .register_event_notifier = scmi_register_notifier, |
| .unregister_event_notifier = scmi_unregister_notifier, |
| }; |
| |
| /** |
| * scmi_notification_init() - Initializes Notification Core Support |
| * @handle: The handle identifying the platform instance to initialize |
| * |
| * This function lays out all the basic resources needed by the notification |
| * core instance identified by the provided handle: once done, all of the |
| * SCMI Protocols can register their events with the core during their own |
| * initializations. |
| * |
| * Note that failing to initialize the core notifications support does not |
| * cause the whole SCMI Protocols stack to fail its initialization. |
| * |
| * SCMI Notification Initialization happens in 2 steps: |
| * * initialization: basic common allocations (this function) |
| * * registration: protocols asynchronously come into life and registers their |
| * own supported list of events with the core; this causes |
| * further per-protocol allocations |
| * |
| * Any user's callback registration attempt, referring a still not registered |
| * event, will be registered as pending and finalized later (if possible) |
| * by scmi_protocols_late_init() work. |
| * This allows for lazy initialization of SCMI Protocols due to late (or |
| * missing) SCMI drivers' modules loading. |
| * |
| * Return: 0 on Success |
| */ |
| int scmi_notification_init(struct scmi_handle *handle) |
| { |
| void *gid; |
| struct scmi_notify_instance *ni; |
| |
| gid = devres_open_group(handle->dev, NULL, GFP_KERNEL); |
| if (!gid) |
| return -ENOMEM; |
| |
| ni = devm_kzalloc(handle->dev, sizeof(*ni), GFP_KERNEL); |
| if (!ni) |
| goto err; |
| |
| ni->gid = gid; |
| ni->handle = handle; |
| |
| ni->notify_wq = alloc_workqueue("scmi_notify", |
| WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS, |
| 0); |
| if (!ni->notify_wq) |
| goto err; |
| |
| ni->registered_protocols = devm_kcalloc(handle->dev, SCMI_MAX_PROTO, |
| sizeof(char *), GFP_KERNEL); |
| if (!ni->registered_protocols) |
| goto err; |
| |
| mutex_init(&ni->pending_mtx); |
| hash_init(ni->pending_events_handlers); |
| |
| INIT_WORK(&ni->init_work, scmi_protocols_late_init); |
| |
| handle->notify_ops = ¬ify_ops; |
| handle->notify_priv = ni; |
| /* Ensure handle is up to date */ |
| smp_wmb(); |
| |
| dev_info(handle->dev, "Core Enabled.\n"); |
| |
| devres_close_group(handle->dev, ni->gid); |
| |
| return 0; |
| |
| err: |
| dev_warn(handle->dev, "Initialization Failed.\n"); |
| devres_release_group(handle->dev, NULL); |
| return -ENOMEM; |
| } |
| |
| /** |
| * scmi_notification_exit() - Shutdown and clean Notification core |
| * @handle: The handle identifying the platform instance to shutdown |
| */ |
| void scmi_notification_exit(struct scmi_handle *handle) |
| { |
| struct scmi_notify_instance *ni; |
| |
| /* Ensure notify_priv is updated */ |
| smp_rmb(); |
| if (!handle->notify_priv) |
| return; |
| ni = handle->notify_priv; |
| |
| handle->notify_priv = NULL; |
| /* Ensure handle is up to date */ |
| smp_wmb(); |
| |
| /* Destroy while letting pending work complete */ |
| destroy_workqueue(ni->notify_wq); |
| |
| devres_release_group(ni->handle->dev, ni->gid); |
| } |