drivers/gpu/drm/bridge/parade-ps8640.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2016 MediaTek Inc.
  */

 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>

 #include <drm/drm_bridge.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>

 #define PAGE2_GPIO_H		0xa7
 #define PS_GPIO9		BIT(1)
 #define PAGE2_I2C_BYPASS	0xea
 #define I2C_BYPASS_EN		0xd0
 #define PAGE2_MCS_EN		0xf3
 #define MCS_EN			BIT(0)
 #define PAGE3_SET_ADD		0xfe
 #define VDO_CTL_ADD		0x13
 #define VDO_DIS			0x18
 #define VDO_EN			0x1c
 #define DP_NUM_LANES		4

 /*
  * PS8640 uses multiple addresses:
  * page[0]: for DP control
  * page[1]: for VIDEO Bridge
  * page[2]: for control top
  * page[3]: for DSI Link Control1
  * page[4]: for MIPI Phy
  * page[5]: for VPLL
  * page[6]: for DSI Link Control2
  * page[7]: for SPI ROM mapping
  */
 enum page_addr_offset {
 	PAGE0_DP_CNTL = 0,
 	PAGE1_VDO_BDG,
 	PAGE2_TOP_CNTL,
 	PAGE3_DSI_CNTL1,
 	PAGE4_MIPI_PHY,
 	PAGE5_VPLL,
 	PAGE6_DSI_CNTL2,
 	PAGE7_SPI_CNTL,
 	MAX_DEVS
 };

 enum ps8640_vdo_control {
 	DISABLE = VDO_DIS,
 	ENABLE = VDO_EN,
 };

 struct ps8640 {
 	struct drm_bridge bridge;
 	struct drm_bridge *panel_bridge;
 	struct mipi_dsi_device *dsi;
 	struct i2c_client *page[MAX_DEVS];
 	struct regulator_bulk_data supplies[2];
 	struct gpio_desc *gpio_reset;
 	struct gpio_desc *gpio_powerdown;
 };

 static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
 {
 	return container_of(e, struct ps8640, bridge);
 }

 static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
 				     const enum ps8640_vdo_control ctrl)
 {
 	struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
 	u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl };
 	int ret;

 	ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
 					     sizeof(vdo_ctrl_buf),
 					     vdo_ctrl_buf);
 	if (ret < 0)
 		return ret;

 	return 0;
 }

 static void ps8640_pre_enable(struct drm_bridge *bridge)
 {
 	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
 	struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
 	unsigned long timeout;
 	int ret, status;

 	ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies),
 				    ps_bridge->supplies);
 	if (ret < 0) {
 		DRM_ERROR("cannot enable regulators %d\n", ret);
 		return;
 	}

 	gpiod_set_value(ps_bridge->gpio_powerdown, 0);
 	gpiod_set_value(ps_bridge->gpio_reset, 1);
 	usleep_range(2000, 2500);
 	gpiod_set_value(ps_bridge->gpio_reset, 0);

 	/*
 	 * Wait for the ps8640 embedded MCU to be ready
 	 * First wait 200ms and then check the MCU ready flag every 20ms
 	 */
 	msleep(200);

 	timeout = jiffies + msecs_to_jiffies(200) + 1;

 	while (time_is_after_jiffies(timeout)) {
 		status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H);
 		if (status < 0) {
 			DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status);
 			goto err_regulators_disable;
 		}
 		if ((status & PS_GPIO9) == PS_GPIO9)
 			break;

 		msleep(20);
 	}

 	msleep(50);

 	/*
 	 * The Manufacturer Command Set (MCS) is a device dependent interface
 	 * intended for factory programming of the display module default
 	 * parameters. Once the display module is configured, the MCS shall be
 	 * disabled by the manufacturer. Once disabled, all MCS commands are
 	 * ignored by the display interface.
 	 */
 	status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN);
 	if (status < 0) {
 		DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status);
 		goto err_regulators_disable;
 	}

 	ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN,
 					status & ~MCS_EN);
 	if (ret < 0) {
 		DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret);
 		goto err_regulators_disable;
 	}

 	ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
 	if (ret) {
 		DRM_ERROR("failed to enable VDO: %d\n", ret);
 		goto err_regulators_disable;
 	}

 	/* Switch access edp panel's edid through i2c */
 	ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
 					I2C_BYPASS_EN);
 	if (ret < 0) {
 		DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret);
 		goto err_regulators_disable;
 	}

 	return;

 err_regulators_disable:
 	regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
 			       ps_bridge->supplies);
 }

 static void ps8640_post_disable(struct drm_bridge *bridge)
 {
 	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
 	int ret;

 	ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
 	if (ret < 0)
 		DRM_ERROR("failed to disable VDO: %d\n", ret);

 	gpiod_set_value(ps_bridge->gpio_reset, 1);
 	gpiod_set_value(ps_bridge->gpio_powerdown, 1);
 	ret = regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
 				     ps_bridge->supplies);
 	if (ret < 0)
 		DRM_ERROR("cannot disable regulators %d\n", ret);
 }

 static int ps8640_bridge_attach(struct drm_bridge *bridge,
 				enum drm_bridge_attach_flags flags)
 {
 	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
 	struct device *dev = &ps_bridge->page[0]->dev;
 	struct device_node *in_ep, *dsi_node;
 	struct mipi_dsi_device *dsi;
 	struct mipi_dsi_host *host;
 	int ret;
 	const struct mipi_dsi_device_info info = { .type = "ps8640",
 						   .channel = 0,
 						   .node = NULL,
 						 };
 	/* port@0 is ps8640 dsi input port */
 	in_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
 	if (!in_ep)
 		return -ENODEV;

 	dsi_node = of_graph_get_remote_port_parent(in_ep);
 	of_node_put(in_ep);
 	if (!dsi_node)
 		return -ENODEV;

 	host = of_find_mipi_dsi_host_by_node(dsi_node);
 	of_node_put(dsi_node);
 	if (!host)
 		return -ENODEV;

 	dsi = mipi_dsi_device_register_full(host, &info);
 	if (IS_ERR(dsi)) {
 		dev_err(dev, "failed to create dsi device\n");
 		ret = PTR_ERR(dsi);
 		return ret;
 	}

 	ps_bridge->dsi = dsi;

 	dsi->host = host;
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
 			  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->lanes = DP_NUM_LANES;
 	ret = mipi_dsi_attach(dsi);
 	if (ret)
 		goto err_dsi_attach;

 	/* Attach the panel-bridge to the dsi bridge */
 	return drm_bridge_attach(bridge->encoder, ps_bridge->panel_bridge,
 				 &ps_bridge->bridge, flags);

 err_dsi_attach:
 	mipi_dsi_device_unregister(dsi);
 	return ret;
 }

 static const struct drm_bridge_funcs ps8640_bridge_funcs = {
 	.attach = ps8640_bridge_attach,
 	.post_disable = ps8640_post_disable,
 	.pre_enable = ps8640_pre_enable,
 };

 static int ps8640_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct device_node *np = dev->of_node;
 	struct ps8640 *ps_bridge;
 	struct drm_panel *panel;
 	int ret;
 	u32 i;

 	ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL);
 	if (!ps_bridge)
 		return -ENOMEM;

 	/* port@1 is ps8640 output port */
 	ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
 	if (!panel)
 		return -ENODEV;

 	ps_bridge->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
 	if (IS_ERR(ps_bridge->panel_bridge))
 		return PTR_ERR(ps_bridge->panel_bridge);

 	ps_bridge->supplies[0].supply = "vdd33";
 	ps_bridge->supplies[1].supply = "vdd12";
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies),
 				      ps_bridge->supplies);
 	if (ret)
 		return ret;

 	ps_bridge->gpio_powerdown = devm_gpiod_get(&client->dev, "powerdown",
 						   GPIOD_OUT_HIGH);
 	if (IS_ERR(ps_bridge->gpio_powerdown))
 		return PTR_ERR(ps_bridge->gpio_powerdown);

 	/*
 	 * Assert the reset to avoid the bridge being initialized prematurely
 	 */
 	ps_bridge->gpio_reset = devm_gpiod_get(&client->dev, "reset",
 					       GPIOD_OUT_HIGH);
 	if (IS_ERR(ps_bridge->gpio_reset))
 		return PTR_ERR(ps_bridge->gpio_reset);

 	ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
 	ps_bridge->bridge.of_node = dev->of_node;

 	ps_bridge->page[PAGE0_DP_CNTL] = client;

 	for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) {
 		ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev,
 							     client->adapter,
 							     client->addr + i);
 		if (IS_ERR(ps_bridge->page[i])) {
 			dev_err(dev, "failed i2c dummy device, address %02x\n",
 				client->addr + i);
 			return PTR_ERR(ps_bridge->page[i]);
 		}
 	}

 	i2c_set_clientdata(client, ps_bridge);

 	drm_bridge_add(&ps_bridge->bridge);

 	return 0;
 }

 static int ps8640_remove(struct i2c_client *client)
 {
 	struct ps8640 *ps_bridge = i2c_get_clientdata(client);

 	drm_bridge_remove(&ps_bridge->bridge);

 	return 0;
 }

 static const struct of_device_id ps8640_match[] = {
 	{ .compatible = "parade,ps8640" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ps8640_match);

 static struct i2c_driver ps8640_driver = {
 	.probe_new = ps8640_probe,
 	.remove = ps8640_remove,
 	.driver = {
 		.name = "ps8640",
 		.of_match_table = ps8640_match,
 	},
 };
 module_i2c_driver(ps8640_driver);

 MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>");
 MODULE_AUTHOR("CK Hu <ck.hu@mediatek.com>");
 MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>");
 MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (c) 2016 MediaTek Inc.
	*/

	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/gpio/consumer.h>
	#include <linux/i2c.h>
	#include <linux/module.h>
	#include <linux/of_graph.h>
	#include <linux/regulator/consumer.h>

	#include <drm/drm_bridge.h>
	#include <drm/drm_mipi_dsi.h>
	#include <drm/drm_of.h>
	#include <drm/drm_panel.h>
	#include <drm/drm_print.h>

	#define PAGE2_GPIO_H 0xa7
	#define PS_GPIO9 BIT(1)
	#define PAGE2_I2C_BYPASS 0xea
	#define I2C_BYPASS_EN 0xd0
	#define PAGE2_MCS_EN 0xf3
	#define MCS_EN BIT(0)
	#define PAGE3_SET_ADD 0xfe
	#define VDO_CTL_ADD 0x13
	#define VDO_DIS 0x18
	#define VDO_EN 0x1c
	#define DP_NUM_LANES 4

	/*
	* PS8640 uses multiple addresses:
	* page[0]: for DP control
	* page[1]: for VIDEO Bridge
	* page[2]: for control top
	* page[3]: for DSI Link Control1
	* page[4]: for MIPI Phy
	* page[5]: for VPLL
	* page[6]: for DSI Link Control2
	* page[7]: for SPI ROM mapping
	*/
	enum page_addr_offset {
	PAGE0_DP_CNTL = 0,
	PAGE1_VDO_BDG,
	PAGE2_TOP_CNTL,
	PAGE3_DSI_CNTL1,
	PAGE4_MIPI_PHY,
	PAGE5_VPLL,
	PAGE6_DSI_CNTL2,
	PAGE7_SPI_CNTL,
	MAX_DEVS
	};

	enum ps8640_vdo_control {
	DISABLE = VDO_DIS,
	ENABLE = VDO_EN,
	};

	struct ps8640 {
	struct drm_bridge bridge;
	struct drm_bridge *panel_bridge;
	struct mipi_dsi_device *dsi;
	struct i2c_client *page[MAX_DEVS];
	struct regulator_bulk_data supplies[2];
	struct gpio_desc *gpio_reset;
	struct gpio_desc *gpio_powerdown;
	};

	static inline struct ps8640 bridge_to_ps8640(struct drm_bridge e)
	{
	return container_of(e, struct ps8640, bridge);
	}

	static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
	const enum ps8640_vdo_control ctrl)
	{
	struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
	u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl };
	int ret;

	ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
	sizeof(vdo_ctrl_buf),
	vdo_ctrl_buf);
	if (ret < 0)
	return ret;

	return 0;
	}

	static void ps8640_pre_enable(struct drm_bridge *bridge)
	{
	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
	struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
	unsigned long timeout;
	int ret, status;

	ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies),
	ps_bridge->supplies);
	if (ret < 0) {
	DRM_ERROR("cannot enable regulators %d\n", ret);
	return;
	}

	gpiod_set_value(ps_bridge->gpio_powerdown, 0);
	gpiod_set_value(ps_bridge->gpio_reset, 1);
	usleep_range(2000, 2500);
	gpiod_set_value(ps_bridge->gpio_reset, 0);

	/*
	* Wait for the ps8640 embedded MCU to be ready
	* First wait 200ms and then check the MCU ready flag every 20ms
	*/
	msleep(200);

	timeout = jiffies + msecs_to_jiffies(200) + 1;

	while (time_is_after_jiffies(timeout)) {
	status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H);
	if (status < 0) {
	DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status);
	goto err_regulators_disable;
	}
	if ((status & PS_GPIO9) == PS_GPIO9)
	break;

	msleep(20);
	}

	msleep(50);

	/*
	* The Manufacturer Command Set (MCS) is a device dependent interface
	* intended for factory programming of the display module default
	* parameters. Once the display module is configured, the MCS shall be
	* disabled by the manufacturer. Once disabled, all MCS commands are
	* ignored by the display interface.
	*/
	status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN);
	if (status < 0) {
	DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status);
	goto err_regulators_disable;
	}

	ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN,
	status & ~MCS_EN);
	if (ret < 0) {
	DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret);
	goto err_regulators_disable;
	}

	ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
	if (ret) {
	DRM_ERROR("failed to enable VDO: %d\n", ret);
	goto err_regulators_disable;
	}

	/* Switch access edp panel's edid through i2c */
	ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
	I2C_BYPASS_EN);
	if (ret < 0) {
	DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret);
	goto err_regulators_disable;
	}

	return;

	err_regulators_disable:
	regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
	ps_bridge->supplies);
	}

	static void ps8640_post_disable(struct drm_bridge *bridge)
	{
	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
	int ret;

	ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
	if (ret < 0)
	DRM_ERROR("failed to disable VDO: %d\n", ret);

	gpiod_set_value(ps_bridge->gpio_reset, 1);
	gpiod_set_value(ps_bridge->gpio_powerdown, 1);
	ret = regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies),
	ps_bridge->supplies);
	if (ret < 0)
	DRM_ERROR("cannot disable regulators %d\n", ret);
	}

	static int ps8640_bridge_attach(struct drm_bridge *bridge,
	enum drm_bridge_attach_flags flags)
	{
	struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
	struct device *dev = &ps_bridge->page[0]->dev;
	struct device_node in_ep, dsi_node;
	struct mipi_dsi_device *dsi;
	struct mipi_dsi_host *host;
	int ret;
	const struct mipi_dsi_device_info info = { .type = "ps8640",
	.channel = 0,
	.node = NULL,
	};
	/* port@0 is ps8640 dsi input port */
	in_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
	if (!in_ep)
	return -ENODEV;

	dsi_node = of_graph_get_remote_port_parent(in_ep);
	of_node_put(in_ep);
	if (!dsi_node)
	return -ENODEV;

	host = of_find_mipi_dsi_host_by_node(dsi_node);
	of_node_put(dsi_node);
	if (!host)
	return -ENODEV;

	dsi = mipi_dsi_device_register_full(host, &info);
	if (IS_ERR(dsi)) {
	dev_err(dev, "failed to create dsi device\n");
	ret = PTR_ERR(dsi);
	return ret;
	}

	ps_bridge->dsi = dsi;

	dsi->host = host;
	dsi->mode_flags = MIPI_DSI_MODE_VIDEO \|
	MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
	dsi->format = MIPI_DSI_FMT_RGB888;
	dsi->lanes = DP_NUM_LANES;
	ret = mipi_dsi_attach(dsi);
	if (ret)
	goto err_dsi_attach;

	/* Attach the panel-bridge to the dsi bridge */
	return drm_bridge_attach(bridge->encoder, ps_bridge->panel_bridge,
	&ps_bridge->bridge, flags);

	err_dsi_attach:
	mipi_dsi_device_unregister(dsi);
	return ret;
	}

	static const struct drm_bridge_funcs ps8640_bridge_funcs = {
	.attach = ps8640_bridge_attach,
	.post_disable = ps8640_post_disable,
	.pre_enable = ps8640_pre_enable,
	};

	static int ps8640_probe(struct i2c_client *client)
	{
	struct device *dev = &client->dev;
	struct device_node *np = dev->of_node;
	struct ps8640 *ps_bridge;
	struct drm_panel *panel;
	int ret;
	u32 i;

	ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL);
	if (!ps_bridge)
	return -ENOMEM;

	/* port@1 is ps8640 output port */
	ret = drm_of_find_panel_or_bridge(np, 1, 0, &panel, NULL);
	if (ret < 0)
	return ret;
	if (!panel)
	return -ENODEV;

	ps_bridge->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
	if (IS_ERR(ps_bridge->panel_bridge))
	return PTR_ERR(ps_bridge->panel_bridge);

	ps_bridge->supplies[0].supply = "vdd33";
	ps_bridge->supplies[1].supply = "vdd12";
	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies),
	ps_bridge->supplies);
	if (ret)
	return ret;

	ps_bridge->gpio_powerdown = devm_gpiod_get(&client->dev, "powerdown",
	GPIOD_OUT_HIGH);
	if (IS_ERR(ps_bridge->gpio_powerdown))
	return PTR_ERR(ps_bridge->gpio_powerdown);

	/*
	* Assert the reset to avoid the bridge being initialized prematurely
	*/
	ps_bridge->gpio_reset = devm_gpiod_get(&client->dev, "reset",
	GPIOD_OUT_HIGH);
	if (IS_ERR(ps_bridge->gpio_reset))
	return PTR_ERR(ps_bridge->gpio_reset);

	ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
	ps_bridge->bridge.of_node = dev->of_node;

	ps_bridge->page[PAGE0_DP_CNTL] = client;

	for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) {
	ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev,
	client->adapter,
	client->addr + i);
	if (IS_ERR(ps_bridge->page[i])) {
	dev_err(dev, "failed i2c dummy device, address %02x\n",
	client->addr + i);
	return PTR_ERR(ps_bridge->page[i]);
	}
	}

	i2c_set_clientdata(client, ps_bridge);

	drm_bridge_add(&ps_bridge->bridge);

	return 0;
	}

	static int ps8640_remove(struct i2c_client *client)
	{
	struct ps8640 *ps_bridge = i2c_get_clientdata(client);

	drm_bridge_remove(&ps_bridge->bridge);

	return 0;
	}

	static const struct of_device_id ps8640_match[] = {
	{ .compatible = "parade,ps8640" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, ps8640_match);

	static struct i2c_driver ps8640_driver = {
	.probe_new = ps8640_probe,
	.remove = ps8640_remove,
	.driver = {
	.name = "ps8640",
	.of_match_table = ps8640_match,
	},
	};
	module_i2c_driver(ps8640_driver);

	MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>");
	MODULE_AUTHOR("CK Hu <ck.hu@mediatek.com>");
	MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>");
	MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver");
	MODULE_LICENSE("GPL v2");