drivers/net/usb/sr9800.h - linux - Git at Google

 /* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
  *
  * Author : Liu Junliang <liujunliang_ljl@163.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */

 #ifndef	_SR9800_H
 #define	_SR9800_H

 /* SR9800 spec. command table on Linux Platform */

 /* command : Software Station Management Control Reg */
 #define SR_CMD_SET_SW_MII		0x06
 /* command : PHY Read Reg */
 #define SR_CMD_READ_MII_REG		0x07
 /* command : PHY Write Reg */
 #define SR_CMD_WRITE_MII_REG		0x08
 /* command : Hardware Station Management Control Reg */
 #define SR_CMD_SET_HW_MII		0x0a
 /* command : SROM Read Reg */
 #define SR_CMD_READ_EEPROM		0x0b
 /* command : SROM Write Reg */
 #define SR_CMD_WRITE_EEPROM		0x0c
 /* command : SROM Write Enable Reg */
 #define SR_CMD_WRITE_ENABLE		0x0d
 /* command : SROM Write Disable Reg */
 #define SR_CMD_WRITE_DISABLE		0x0e
 /* command : RX Control Read Reg */
 #define SR_CMD_READ_RX_CTL		0x0f
 #define		SR_RX_CTL_PRO			(1 << 0)
 #define		SR_RX_CTL_AMALL			(1 << 1)
 #define		SR_RX_CTL_SEP			(1 << 2)
 #define		SR_RX_CTL_AB			(1 << 3)
 #define		SR_RX_CTL_AM			(1 << 4)
 #define		SR_RX_CTL_AP			(1 << 5)
 #define		SR_RX_CTL_ARP			(1 << 6)
 #define		SR_RX_CTL_SO			(1 << 7)
 #define		SR_RX_CTL_RH1M			(1 << 8)
 #define		SR_RX_CTL_RH2M			(1 << 9)
 #define		SR_RX_CTL_RH3M			(1 << 10)
 /* command : RX Control Write Reg */
 #define SR_CMD_WRITE_RX_CTL		0x10
 /* command : IPG0/IPG1/IPG2 Control Read Reg */
 #define SR_CMD_READ_IPG012		0x11
 /* command : IPG0/IPG1/IPG2 Control Write Reg */
 #define SR_CMD_WRITE_IPG012		0x12
 /* command : Node ID Read Reg */
 #define SR_CMD_READ_NODE_ID		0x13
 /* command : Node ID Write Reg */
 #define SR_CMD_WRITE_NODE_ID		0x14
 /* command : Multicast Filter Array Read Reg */
 #define	SR_CMD_READ_MULTI_FILTER	0x15
 /* command : Multicast Filter Array Write Reg */
 #define SR_CMD_WRITE_MULTI_FILTER	0x16
 /* command : Eth/HomePNA PHY Address Reg */
 #define SR_CMD_READ_PHY_ID		0x19
 /* command : Medium Status Read Reg */
 #define SR_CMD_READ_MEDIUM_STATUS	0x1a
 #define		SR_MONITOR_LINK			(1 << 1)
 #define		SR_MONITOR_MAGIC		(1 << 2)
 #define		SR_MONITOR_HSFS			(1 << 4)
 /* command : Medium Status Write Reg */
 #define SR_CMD_WRITE_MEDIUM_MODE	0x1b
 #define		SR_MEDIUM_GM			(1 << 0)
 #define		SR_MEDIUM_FD			(1 << 1)
 #define		SR_MEDIUM_AC			(1 << 2)
 #define		SR_MEDIUM_ENCK			(1 << 3)
 #define		SR_MEDIUM_RFC			(1 << 4)
 #define		SR_MEDIUM_TFC			(1 << 5)
 #define		SR_MEDIUM_JFE			(1 << 6)
 #define		SR_MEDIUM_PF			(1 << 7)
 #define		SR_MEDIUM_RE			(1 << 8)
 #define		SR_MEDIUM_PS			(1 << 9)
 #define		SR_MEDIUM_RSV			(1 << 10)
 #define		SR_MEDIUM_SBP			(1 << 11)
 #define		SR_MEDIUM_SM			(1 << 12)
 /* command : Monitor Mode Status Read Reg */
 #define SR_CMD_READ_MONITOR_MODE	0x1c
 /* command : Monitor Mode Status Write Reg */
 #define SR_CMD_WRITE_MONITOR_MODE	0x1d
 /* command : GPIO Status Read Reg */
 #define SR_CMD_READ_GPIOS		0x1e
 #define		SR_GPIO_GPO0EN		(1 << 0) /* GPIO0 Output enable */
 #define		SR_GPIO_GPO_0		(1 << 1) /* GPIO0 Output value */
 #define		SR_GPIO_GPO1EN		(1 << 2) /* GPIO1 Output enable */
 #define		SR_GPIO_GPO_1		(1 << 3) /* GPIO1 Output value */
 #define		SR_GPIO_GPO2EN		(1 << 4) /* GPIO2 Output enable */
 #define		SR_GPIO_GPO_2		(1 << 5) /* GPIO2 Output value */
 #define		SR_GPIO_RESERVED	(1 << 6) /* Reserved */
 #define		SR_GPIO_RSE		(1 << 7) /* Reload serial EEPROM */
 /* command : GPIO Status Write Reg */
 #define SR_CMD_WRITE_GPIOS		0x1f
 /* command : Eth PHY Power and Reset Control Reg */
 #define SR_CMD_SW_RESET			0x20
 #define		SR_SWRESET_CLEAR		0x00
 #define		SR_SWRESET_RR			(1 << 0)
 #define		SR_SWRESET_RT			(1 << 1)
 #define		SR_SWRESET_PRTE			(1 << 2)
 #define		SR_SWRESET_PRL			(1 << 3)
 #define		SR_SWRESET_BZ			(1 << 4)
 #define		SR_SWRESET_IPRL			(1 << 5)
 #define		SR_SWRESET_IPPD			(1 << 6)
 /* command : Software Interface Selection Status Read Reg */
 #define SR_CMD_SW_PHY_STATUS		0x21
 /* command : Software Interface Selection Status Write Reg */
 #define SR_CMD_SW_PHY_SELECT		0x22
 /* command : BULK in Buffer Size Reg */
 #define	SR_CMD_BULKIN_SIZE		0x2A
 /* command : LED_MUX Control Reg */
 #define	SR_CMD_LED_MUX			0x70
 #define		SR_LED_MUX_TX_ACTIVE		(1 << 0)
 #define		SR_LED_MUX_RX_ACTIVE		(1 << 1)
 #define		SR_LED_MUX_COLLISION		(1 << 2)
 #define		SR_LED_MUX_DUP_COL		(1 << 3)
 #define		SR_LED_MUX_DUP			(1 << 4)
 #define		SR_LED_MUX_SPEED		(1 << 5)
 #define		SR_LED_MUX_LINK_ACTIVE		(1 << 6)
 #define		SR_LED_MUX_LINK			(1 << 7)

 /* Register Access Flags */
 #define SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
 #define SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)

 /* Multicast Filter Array size & Max Number */
 #define	SR_MCAST_FILTER_SIZE		8
 #define	SR_MAX_MCAST			64

 /* IPG0/1/2 Default Value */
 #define	SR9800_IPG0_DEFAULT		0x15
 #define	SR9800_IPG1_DEFAULT		0x0c
 #define	SR9800_IPG2_DEFAULT		0x12

 /* Medium Status Default Mode */
 #define SR9800_MEDIUM_DEFAULT	\
 	(SR_MEDIUM_FD | SR_MEDIUM_RFC | \
 	 SR_MEDIUM_TFC | SR_MEDIUM_PS | \
 	 SR_MEDIUM_AC | SR_MEDIUM_RE)

 /* RX Control Default Setting */
 #define SR_DEFAULT_RX_CTL	\
 	(SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)

 /* EEPROM Magic Number & EEPROM Size */
 #define SR_EEPROM_MAGIC			0xdeadbeef
 #define SR9800_EEPROM_LEN		0xff

 /* SR9800 Driver Version and Driver Name */
 #define DRIVER_VERSION			"11-Nov-2013"
 #define DRIVER_NAME			"CoreChips"
 #define	DRIVER_FLAG		\
 	(FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |  FLAG_MULTI_PACKET)

 /* SR9800 BULKIN Buffer Size */
 #define SR9800_MAX_BULKIN_2K		0
 #define SR9800_MAX_BULKIN_4K		1
 #define SR9800_MAX_BULKIN_6K		2
 #define SR9800_MAX_BULKIN_8K		3
 #define SR9800_MAX_BULKIN_16K		4
 #define SR9800_MAX_BULKIN_20K		5
 #define SR9800_MAX_BULKIN_24K		6
 #define SR9800_MAX_BULKIN_32K		7

 struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
 	/* 2k */
 	{2048, 0x8000, 0x8001},
 	/* 4k */
 	{4096, 0x8100, 0x8147},
 	/* 6k */
 	{6144, 0x8200, 0x81EB},
 	/* 8k */
 	{8192, 0x8300, 0x83D7},
 	/* 16 */
 	{16384, 0x8400, 0x851E},
 	/* 20k */
 	{20480, 0x8500, 0x8666},
 	/* 24k */
 	{24576, 0x8600, 0x87AE},
 	/* 32k */
 	{32768, 0x8700, 0x8A3D},
 };

 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct sr_data {
 	u8 multi_filter[SR_MCAST_FILTER_SIZE];
 	u8 mac_addr[ETH_ALEN];
 	u8 phymode;
 	u8 ledmode;
 	u8 eeprom_len;
 };

 struct sr9800_int_data {
 	__le16 res1;
 	u8 link;
 	__le16 res2;
 	u8 status;
 	__le16 res3;
 } __packed;

 #endif	/* _SR9800_H */
	/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
	*
	* Author : Liu Junliang <liujunliang_ljl@163.com>
	*
	* This file is licensed under the terms of the GNU General Public License
	* version 2. This program is licensed "as is" without any warranty of any
	* kind, whether express or implied.
	*/

	#ifndef _SR9800_H
	#define _SR9800_H

	/* SR9800 spec. command table on Linux Platform */

	/* command : Software Station Management Control Reg */
	#define SR_CMD_SET_SW_MII 0x06
	/* command : PHY Read Reg */
	#define SR_CMD_READ_MII_REG 0x07
	/* command : PHY Write Reg */
	#define SR_CMD_WRITE_MII_REG 0x08
	/* command : Hardware Station Management Control Reg */
	#define SR_CMD_SET_HW_MII 0x0a
	/* command : SROM Read Reg */
	#define SR_CMD_READ_EEPROM 0x0b
	/* command : SROM Write Reg */
	#define SR_CMD_WRITE_EEPROM 0x0c
	/* command : SROM Write Enable Reg */
	#define SR_CMD_WRITE_ENABLE 0x0d
	/* command : SROM Write Disable Reg */
	#define SR_CMD_WRITE_DISABLE 0x0e
	/* command : RX Control Read Reg */
	#define SR_CMD_READ_RX_CTL 0x0f
	#define SR_RX_CTL_PRO (1 << 0)
	#define SR_RX_CTL_AMALL (1 << 1)
	#define SR_RX_CTL_SEP (1 << 2)
	#define SR_RX_CTL_AB (1 << 3)
	#define SR_RX_CTL_AM (1 << 4)
	#define SR_RX_CTL_AP (1 << 5)
	#define SR_RX_CTL_ARP (1 << 6)
	#define SR_RX_CTL_SO (1 << 7)
	#define SR_RX_CTL_RH1M (1 << 8)
	#define SR_RX_CTL_RH2M (1 << 9)
	#define SR_RX_CTL_RH3M (1 << 10)
	/* command : RX Control Write Reg */
	#define SR_CMD_WRITE_RX_CTL 0x10
	/* command : IPG0/IPG1/IPG2 Control Read Reg */
	#define SR_CMD_READ_IPG012 0x11
	/* command : IPG0/IPG1/IPG2 Control Write Reg */
	#define SR_CMD_WRITE_IPG012 0x12
	/* command : Node ID Read Reg */
	#define SR_CMD_READ_NODE_ID 0x13
	/* command : Node ID Write Reg */
	#define SR_CMD_WRITE_NODE_ID 0x14
	/* command : Multicast Filter Array Read Reg */
	#define SR_CMD_READ_MULTI_FILTER 0x15
	/* command : Multicast Filter Array Write Reg */
	#define SR_CMD_WRITE_MULTI_FILTER 0x16
	/* command : Eth/HomePNA PHY Address Reg */
	#define SR_CMD_READ_PHY_ID 0x19
	/* command : Medium Status Read Reg */
	#define SR_CMD_READ_MEDIUM_STATUS 0x1a
	#define SR_MONITOR_LINK (1 << 1)
	#define SR_MONITOR_MAGIC (1 << 2)
	#define SR_MONITOR_HSFS (1 << 4)
	/* command : Medium Status Write Reg */
	#define SR_CMD_WRITE_MEDIUM_MODE 0x1b
	#define SR_MEDIUM_GM (1 << 0)
	#define SR_MEDIUM_FD (1 << 1)
	#define SR_MEDIUM_AC (1 << 2)
	#define SR_MEDIUM_ENCK (1 << 3)
	#define SR_MEDIUM_RFC (1 << 4)
	#define SR_MEDIUM_TFC (1 << 5)
	#define SR_MEDIUM_JFE (1 << 6)
	#define SR_MEDIUM_PF (1 << 7)
	#define SR_MEDIUM_RE (1 << 8)
	#define SR_MEDIUM_PS (1 << 9)
	#define SR_MEDIUM_RSV (1 << 10)
	#define SR_MEDIUM_SBP (1 << 11)
	#define SR_MEDIUM_SM (1 << 12)
	/* command : Monitor Mode Status Read Reg */
	#define SR_CMD_READ_MONITOR_MODE 0x1c
	/* command : Monitor Mode Status Write Reg */
	#define SR_CMD_WRITE_MONITOR_MODE 0x1d
	/* command : GPIO Status Read Reg */
	#define SR_CMD_READ_GPIOS 0x1e
	#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */
	#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */
	#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */
	#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */
	#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */
	#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */
	#define SR_GPIO_RESERVED (1 << 6) /* Reserved */
	#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */
	/* command : GPIO Status Write Reg */
	#define SR_CMD_WRITE_GPIOS 0x1f
	/* command : Eth PHY Power and Reset Control Reg */
	#define SR_CMD_SW_RESET 0x20
	#define SR_SWRESET_CLEAR 0x00
	#define SR_SWRESET_RR (1 << 0)
	#define SR_SWRESET_RT (1 << 1)
	#define SR_SWRESET_PRTE (1 << 2)
	#define SR_SWRESET_PRL (1 << 3)
	#define SR_SWRESET_BZ (1 << 4)
	#define SR_SWRESET_IPRL (1 << 5)
	#define SR_SWRESET_IPPD (1 << 6)
	/* command : Software Interface Selection Status Read Reg */
	#define SR_CMD_SW_PHY_STATUS 0x21
	/* command : Software Interface Selection Status Write Reg */
	#define SR_CMD_SW_PHY_SELECT 0x22
	/* command : BULK in Buffer Size Reg */
	#define SR_CMD_BULKIN_SIZE 0x2A
	/* command : LED_MUX Control Reg */
	#define SR_CMD_LED_MUX 0x70
	#define SR_LED_MUX_TX_ACTIVE (1 << 0)
	#define SR_LED_MUX_RX_ACTIVE (1 << 1)
	#define SR_LED_MUX_COLLISION (1 << 2)
	#define SR_LED_MUX_DUP_COL (1 << 3)
	#define SR_LED_MUX_DUP (1 << 4)
	#define SR_LED_MUX_SPEED (1 << 5)
	#define SR_LED_MUX_LINK_ACTIVE (1 << 6)
	#define SR_LED_MUX_LINK (1 << 7)

	/* Register Access Flags */
	#define SR_REQ_RD_REG (USB_DIR_IN \| USB_TYPE_VENDOR \| USB_RECIP_DEVICE)
	#define SR_REQ_WR_REG (USB_DIR_OUT \| USB_TYPE_VENDOR \| USB_RECIP_DEVICE)

	/* Multicast Filter Array size & Max Number */
	#define SR_MCAST_FILTER_SIZE 8
	#define SR_MAX_MCAST 64

	/* IPG0/1/2 Default Value */
	#define SR9800_IPG0_DEFAULT 0x15
	#define SR9800_IPG1_DEFAULT 0x0c
	#define SR9800_IPG2_DEFAULT 0x12

	/* Medium Status Default Mode */
	#define SR9800_MEDIUM_DEFAULT \
	(SR_MEDIUM_FD \| SR_MEDIUM_RFC \| \
	SR_MEDIUM_TFC \| SR_MEDIUM_PS \| \
	SR_MEDIUM_AC \| SR_MEDIUM_RE)

	/* RX Control Default Setting */
	#define SR_DEFAULT_RX_CTL \
	(SR_RX_CTL_SO \| SR_RX_CTL_AB \| SR_RX_CTL_RH1M)

	/* EEPROM Magic Number & EEPROM Size */
	#define SR_EEPROM_MAGIC 0xdeadbeef
	#define SR9800_EEPROM_LEN 0xff

	/* SR9800 Driver Version and Driver Name */
	#define DRIVER_VERSION "11-Nov-2013"
	#define DRIVER_NAME "CoreChips"
	#define DRIVER_FLAG \
	(FLAG_ETHER \| FLAG_FRAMING_AX \| FLAG_LINK_INTR \| FLAG_MULTI_PACKET)

	/* SR9800 BULKIN Buffer Size */
	#define SR9800_MAX_BULKIN_2K 0
	#define SR9800_MAX_BULKIN_4K 1
	#define SR9800_MAX_BULKIN_6K 2
	#define SR9800_MAX_BULKIN_8K 3
	#define SR9800_MAX_BULKIN_16K 4
	#define SR9800_MAX_BULKIN_20K 5
	#define SR9800_MAX_BULKIN_24K 6
	#define SR9800_MAX_BULKIN_32K 7

	struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
	/* 2k */
	{2048, 0x8000, 0x8001},
	/* 4k */
	{4096, 0x8100, 0x8147},
	/* 6k */
	{6144, 0x8200, 0x81EB},
	/* 8k */
	{8192, 0x8300, 0x83D7},
	/* 16 */
	{16384, 0x8400, 0x851E},
	/* 20k */
	{20480, 0x8500, 0x8666},
	/* 24k */
	{24576, 0x8600, 0x87AE},
	/* 32k */
	{32768, 0x8700, 0x8A3D},
	};

	/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
	struct sr_data {
	u8 multi_filter[SR_MCAST_FILTER_SIZE];
	u8 mac_addr[ETH_ALEN];
	u8 phymode;
	u8 ledmode;
	u8 eeprom_len;
	};

	struct sr9800_int_data {
	__le16 res1;
	u8 link;
	__le16 res2;
	u8 status;
	__le16 res3;
	} __packed;

	#endif /* _SR9800_H */