drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c - linux - Git at Google

 /*
  * Copyright (C) 2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation version 2.
  *
  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  * kind, whether express or implied; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/delay.h>
 #include <linux/extcon-provider.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>

 #define ICFG_DRD_AFE		0x0
 #define ICFG_MISC_STAT		0x18
 #define ICFG_DRD_P0CTL		0x1C
 #define ICFG_STRAP_CTRL		0x20
 #define ICFG_FSM_CTRL		0x24

 #define ICFG_DEV_BIT		BIT(2)
 #define IDM_RST_BIT		BIT(0)
 #define AFE_CORERDY_VDDC	BIT(18)
 #define PHY_PLL_RESETB		BIT(15)
 #define PHY_RESETB		BIT(14)
 #define PHY_PLL_LOCK		BIT(0)

 #define DRD_DEV_MODE		BIT(20)
 #define OHCI_OVRCUR_POL		BIT(11)
 #define ICFG_OFF_MODE		BIT(6)
 #define PLL_LOCK_RETRY		1000

 #define EVT_DEVICE		0
 #define EVT_HOST		1

 #define DRD_HOST_MODE		(BIT(2) | BIT(3))
 #define DRD_DEVICE_MODE		(BIT(4) | BIT(5))
 #define DRD_HOST_VAL		0x803
 #define DRD_DEV_VAL		0x807
 #define GPIO_DELAY		20

 struct ns2_phy_data;
 struct ns2_phy_driver {
 	void __iomem *icfgdrd_regs;
 	void __iomem *idmdrd_rst_ctrl;
 	void __iomem *crmu_usb2_ctrl;
 	void __iomem *usb2h_strap_reg;
 	struct ns2_phy_data *data;
 	struct extcon_dev *edev;
 	struct gpio_desc *vbus_gpiod;
 	struct gpio_desc *id_gpiod;
 	int id_irq;
 	int vbus_irq;
 	unsigned long debounce_jiffies;
 	struct delayed_work wq_extcon;
 };

 struct ns2_phy_data {
 	struct ns2_phy_driver *driver;
 	struct phy *phy;
 	int new_state;
 };

 static const unsigned int usb_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
 	EXTCON_NONE,
 };

 static inline int pll_lock_stat(u32 usb_reg, int reg_mask,
 				struct ns2_phy_driver *driver)
 {
 	int retry = PLL_LOCK_RETRY;
 	u32 val;

 	do {
 		udelay(1);
 		val = readl(driver->icfgdrd_regs + usb_reg);
 		if (val & reg_mask)
 			return 0;
 	} while (--retry > 0);

 	return -EBUSY;
 }

 static int ns2_drd_phy_init(struct phy *phy)
 {
 	struct ns2_phy_data *data = phy_get_drvdata(phy);
 	struct ns2_phy_driver *driver = data->driver;
 	u32 val;

 	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);

 	if (data->new_state == EVT_HOST) {
 		val &= ~DRD_DEVICE_MODE;
 		val |= DRD_HOST_MODE;
 	} else {
 		val &= ~DRD_HOST_MODE;
 		val |= DRD_DEVICE_MODE;
 	}
 	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 	return 0;
 }

 static int ns2_drd_phy_poweroff(struct phy *phy)
 {
 	struct ns2_phy_data *data = phy_get_drvdata(phy);
 	struct ns2_phy_driver *driver = data->driver;
 	u32 val;

 	val = readl(driver->crmu_usb2_ctrl);
 	val &= ~AFE_CORERDY_VDDC;
 	writel(val, driver->crmu_usb2_ctrl);

 	val = readl(driver->crmu_usb2_ctrl);
 	val &= ~DRD_DEV_MODE;
 	writel(val, driver->crmu_usb2_ctrl);

 	/* Disable Host and Device Mode */
 	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);
 	val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE | ICFG_OFF_MODE);
 	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 	return 0;
 }

 static int ns2_drd_phy_poweron(struct phy *phy)
 {
 	struct ns2_phy_data *data = phy_get_drvdata(phy);
 	struct ns2_phy_driver *driver = data->driver;
 	u32 extcon_event = data->new_state;
 	int ret;
 	u32 val;

 	if (extcon_event == EVT_DEVICE) {
 		writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);

 		val = readl(driver->idmdrd_rst_ctrl);
 		val &= ~IDM_RST_BIT;
 		writel(val, driver->idmdrd_rst_ctrl);

 		val = readl(driver->crmu_usb2_ctrl);
 		val |= (AFE_CORERDY_VDDC | DRD_DEV_MODE);
 		writel(val, driver->crmu_usb2_ctrl);

 		/* Bring PHY and PHY_PLL out of Reset */
 		val = readl(driver->crmu_usb2_ctrl);
 		val |= (PHY_PLL_RESETB | PHY_RESETB);
 		writel(val, driver->crmu_usb2_ctrl);

 		ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
 		if (ret < 0) {
 			dev_err(&phy->dev, "Phy PLL lock failed\n");
 			return ret;
 		}
 	} else {
 		writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);

 		val = readl(driver->crmu_usb2_ctrl);
 		val |= AFE_CORERDY_VDDC;
 		writel(val, driver->crmu_usb2_ctrl);

 		ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
 		if (ret < 0) {
 			dev_err(&phy->dev, "Phy PLL lock failed\n");
 			return ret;
 		}

 		val = readl(driver->idmdrd_rst_ctrl);
 		val &= ~IDM_RST_BIT;
 		writel(val, driver->idmdrd_rst_ctrl);

 		/* port over current Polarity */
 		val = readl(driver->usb2h_strap_reg);
 		val |= OHCI_OVRCUR_POL;
 		writel(val, driver->usb2h_strap_reg);
 	}

 	return 0;
 }

 static void connect_change(struct ns2_phy_driver *driver)
 {
 	u32 extcon_event;
 	u32 val;

 	extcon_event = driver->data->new_state;
 	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);

 	switch (extcon_event) {
 	case EVT_DEVICE:
 		val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE);
 		writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 		val = (val & ~DRD_HOST_MODE) | DRD_DEVICE_MODE;
 		writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 		val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
 		val |= ICFG_DEV_BIT;
 		writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
 		break;

 	case EVT_HOST:
 		val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE);
 		writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 		val = (val & ~DRD_DEVICE_MODE) | DRD_HOST_MODE;
 		writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

 		val = readl(driver->usb2h_strap_reg);
 		val |= OHCI_OVRCUR_POL;
 		writel(val, driver->usb2h_strap_reg);

 		val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
 		val &= ~ICFG_DEV_BIT;
 		writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
 		break;

 	default:
 		pr_err("Invalid extcon event\n");
 		break;
 	}
 }

 static void extcon_work(struct work_struct *work)
 {
 	struct ns2_phy_driver *driver;
 	int vbus;
 	int id;

 	driver  = container_of(to_delayed_work(work),
 			       struct ns2_phy_driver, wq_extcon);

 	id = gpiod_get_value_cansleep(driver->id_gpiod);
 	vbus = gpiod_get_value_cansleep(driver->vbus_gpiod);

 	if (!id && vbus) { /* Host connected */
 		extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true);
 		pr_debug("Host cable connected\n");
 		driver->data->new_state = EVT_HOST;
 		connect_change(driver);
 	} else if (id && !vbus) { /* Disconnected */
 		extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false);
 		extcon_set_state_sync(driver->edev, EXTCON_USB, false);
 		pr_debug("Cable disconnected\n");
 	} else if (id && vbus) { /* Device connected */
 		extcon_set_state_sync(driver->edev, EXTCON_USB, true);
 		pr_debug("Device cable connected\n");
 		driver->data->new_state = EVT_DEVICE;
 		connect_change(driver);
 	}
 }

 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 {
 	struct ns2_phy_driver *driver = dev_id;

 	queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
 			   driver->debounce_jiffies);

 	return IRQ_HANDLED;
 }

 static const struct phy_ops ops = {
 	.init		= ns2_drd_phy_init,
 	.power_on	= ns2_drd_phy_poweron,
 	.power_off	= ns2_drd_phy_poweroff,
 	.owner		= THIS_MODULE,
 };

 static const struct of_device_id ns2_drd_phy_dt_ids[] = {
 	{ .compatible = "brcm,ns2-drd-phy", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids);

 static int ns2_drd_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct ns2_phy_driver *driver;
 	struct ns2_phy_data *data;
 	struct resource *res;
 	int ret;
 	u32 val;

 	driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver),
 			      GFP_KERNEL);
 	if (!driver)
 		return -ENOMEM;

 	driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data),
 				  GFP_KERNEL);
 	if (!driver->data)
 		return -ENOMEM;

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "icfg");
 	driver->icfgdrd_regs = devm_ioremap_resource(dev, res);
 	if (IS_ERR(driver->icfgdrd_regs))
 		return PTR_ERR(driver->icfgdrd_regs);

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rst-ctrl");
 	driver->idmdrd_rst_ctrl = devm_ioremap_resource(dev, res);
 	if (IS_ERR(driver->idmdrd_rst_ctrl))
 		return PTR_ERR(driver->idmdrd_rst_ctrl);

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crmu-ctrl");
 	driver->crmu_usb2_ctrl = devm_ioremap_resource(dev, res);
 	if (IS_ERR(driver->crmu_usb2_ctrl))
 		return PTR_ERR(driver->crmu_usb2_ctrl);

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2-strap");
 	driver->usb2h_strap_reg = devm_ioremap_resource(dev, res);
 	if (IS_ERR(driver->usb2h_strap_reg))
 		return PTR_ERR(driver->usb2h_strap_reg);

 	 /* create extcon */
 	driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
 	if (IS_ERR(driver->id_gpiod)) {
 		dev_err(dev, "failed to get ID GPIO\n");
 		return PTR_ERR(driver->id_gpiod);
 	}
 	driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN);
 	if (IS_ERR(driver->vbus_gpiod)) {
 		dev_err(dev, "failed to get VBUS GPIO\n");
 		return PTR_ERR(driver->vbus_gpiod);
 	}

 	driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
 	if (IS_ERR(driver->edev)) {
 		dev_err(dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}

 	ret = devm_extcon_dev_register(dev, driver->edev);
 	if (ret < 0) {
 		dev_err(dev, "failed to register extcon device\n");
 		return ret;
 	}

 	ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000);
 	if (ret < 0)
 		driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY);

 	INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work);

 	driver->id_irq = gpiod_to_irq(driver->id_gpiod);
 	if (driver->id_irq < 0) {
 		dev_err(dev, "failed to get ID IRQ\n");
 		return driver->id_irq;
 	}

 	driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod);
 	if (driver->vbus_irq < 0) {
 		dev_err(dev, "failed to get ID IRQ\n");
 		return driver->vbus_irq;
 	}

 	ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler,
 			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			       "usb_id", driver);
 	if (ret < 0) {
 		dev_err(dev, "failed to request handler for ID IRQ\n");
 		return ret;
 	}

 	ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler,
 			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			       "usb_vbus", driver);
 	if (ret < 0) {
 		dev_err(dev, "failed to request handler for VBUS IRQ\n");
 		return ret;
 	}

 	dev_set_drvdata(dev, driver);

 	/* Shutdown all ports. They can be powered up as required */
 	val = readl(driver->crmu_usb2_ctrl);
 	val &= ~(AFE_CORERDY_VDDC | PHY_RESETB);
 	writel(val, driver->crmu_usb2_ctrl);

 	data = driver->data;
 	data->phy = devm_phy_create(dev, dev->of_node, &ops);
 	if (IS_ERR(data->phy)) {
 		dev_err(dev, "Failed to create usb drd phy\n");
 		return PTR_ERR(data->phy);
 	}

 	data->driver = driver;
 	phy_set_drvdata(data->phy, data);

 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(phy_provider)) {
 		dev_err(dev, "Failed to register as phy provider\n");
 		return PTR_ERR(phy_provider);
 	}

 	platform_set_drvdata(pdev, driver);

 	dev_info(dev, "Registered NS2 DRD Phy device\n");
 	queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
 			   driver->debounce_jiffies);

 	return 0;
 }

 static struct platform_driver ns2_drd_phy_driver = {
 	.probe = ns2_drd_phy_probe,
 	.driver = {
 		.name = "bcm-ns2-usbphy",
 		.of_match_table = of_match_ptr(ns2_drd_phy_dt_ids),
 	},
 };
 module_platform_driver(ns2_drd_phy_driver);

 MODULE_ALIAS("platform:bcm-ns2-drd-phy");
 MODULE_AUTHOR("Broadcom");
 MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver");
 MODULE_LICENSE("GPL v2");
	/*
	* Copyright (C) 2017 Broadcom
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation version 2.
	*
	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	* kind, whether express or implied; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/delay.h>
	#include <linux/extcon-provider.h>
	#include <linux/gpio.h>
	#include <linux/gpio/consumer.h>
	#include <linux/init.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/irq.h>
	#include <linux/mfd/syscon.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_address.h>
	#include <linux/phy/phy.h>
	#include <linux/platform_device.h>
	#include <linux/regmap.h>
	#include <linux/slab.h>
	#include <linux/workqueue.h>

	#define ICFG_DRD_AFE 0x0
	#define ICFG_MISC_STAT 0x18
	#define ICFG_DRD_P0CTL 0x1C
	#define ICFG_STRAP_CTRL 0x20
	#define ICFG_FSM_CTRL 0x24

	#define ICFG_DEV_BIT BIT(2)
	#define IDM_RST_BIT BIT(0)
	#define AFE_CORERDY_VDDC BIT(18)
	#define PHY_PLL_RESETB BIT(15)
	#define PHY_RESETB BIT(14)
	#define PHY_PLL_LOCK BIT(0)

	#define DRD_DEV_MODE BIT(20)
	#define OHCI_OVRCUR_POL BIT(11)
	#define ICFG_OFF_MODE BIT(6)
	#define PLL_LOCK_RETRY 1000

	#define EVT_DEVICE 0
	#define EVT_HOST 1

	#define DRD_HOST_MODE (BIT(2) \| BIT(3))
	#define DRD_DEVICE_MODE (BIT(4) \| BIT(5))
	#define DRD_HOST_VAL 0x803
	#define DRD_DEV_VAL 0x807
	#define GPIO_DELAY 20

	struct ns2_phy_data;
	struct ns2_phy_driver {
	void __iomem *icfgdrd_regs;
	void __iomem *idmdrd_rst_ctrl;
	void __iomem *crmu_usb2_ctrl;
	void __iomem *usb2h_strap_reg;
	struct ns2_phy_data *data;
	struct extcon_dev *edev;
	struct gpio_desc *vbus_gpiod;
	struct gpio_desc *id_gpiod;
	int id_irq;
	int vbus_irq;
	unsigned long debounce_jiffies;
	struct delayed_work wq_extcon;
	};

	struct ns2_phy_data {
	struct ns2_phy_driver *driver;
	struct phy *phy;
	int new_state;
	};

	static const unsigned int usb_extcon_cable[] = {
	EXTCON_USB,
	EXTCON_USB_HOST,
	EXTCON_NONE,
	};

	static inline int pll_lock_stat(u32 usb_reg, int reg_mask,
	struct ns2_phy_driver *driver)
	{
	int retry = PLL_LOCK_RETRY;
	u32 val;

	do {
	udelay(1);
	val = readl(driver->icfgdrd_regs + usb_reg);
	if (val & reg_mask)
	return 0;
	} while (--retry > 0);

	return -EBUSY;
	}

	static int ns2_drd_phy_init(struct phy *phy)
	{
	struct ns2_phy_data *data = phy_get_drvdata(phy);
	struct ns2_phy_driver *driver = data->driver;
	u32 val;

	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);

	if (data->new_state == EVT_HOST) {
	val &= ~DRD_DEVICE_MODE;
	val \|= DRD_HOST_MODE;
	} else {
	val &= ~DRD_HOST_MODE;
	val \|= DRD_DEVICE_MODE;
	}
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	return 0;
	}

	static int ns2_drd_phy_poweroff(struct phy *phy)
	{
	struct ns2_phy_data *data = phy_get_drvdata(phy);
	struct ns2_phy_driver *driver = data->driver;
	u32 val;

	val = readl(driver->crmu_usb2_ctrl);
	val &= ~AFE_CORERDY_VDDC;
	writel(val, driver->crmu_usb2_ctrl);

	val = readl(driver->crmu_usb2_ctrl);
	val &= ~DRD_DEV_MODE;
	writel(val, driver->crmu_usb2_ctrl);

	/* Disable Host and Device Mode */
	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);
	val &= ~(DRD_HOST_MODE \| DRD_DEVICE_MODE \| ICFG_OFF_MODE);
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	return 0;
	}

	static int ns2_drd_phy_poweron(struct phy *phy)
	{
	struct ns2_phy_data *data = phy_get_drvdata(phy);
	struct ns2_phy_driver *driver = data->driver;
	u32 extcon_event = data->new_state;
	int ret;
	u32 val;

	if (extcon_event == EVT_DEVICE) {
	writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);

	val = readl(driver->idmdrd_rst_ctrl);
	val &= ~IDM_RST_BIT;
	writel(val, driver->idmdrd_rst_ctrl);

	val = readl(driver->crmu_usb2_ctrl);
	val \|= (AFE_CORERDY_VDDC \| DRD_DEV_MODE);
	writel(val, driver->crmu_usb2_ctrl);

	/* Bring PHY and PHY_PLL out of Reset */
	val = readl(driver->crmu_usb2_ctrl);
	val \|= (PHY_PLL_RESETB \| PHY_RESETB);
	writel(val, driver->crmu_usb2_ctrl);

	ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
	if (ret < 0) {
	dev_err(&phy->dev, "Phy PLL lock failed\n");
	return ret;
	}
	} else {
	writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);

	val = readl(driver->crmu_usb2_ctrl);
	val \|= AFE_CORERDY_VDDC;
	writel(val, driver->crmu_usb2_ctrl);

	ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
	if (ret < 0) {
	dev_err(&phy->dev, "Phy PLL lock failed\n");
	return ret;
	}

	val = readl(driver->idmdrd_rst_ctrl);
	val &= ~IDM_RST_BIT;
	writel(val, driver->idmdrd_rst_ctrl);

	/* port over current Polarity */
	val = readl(driver->usb2h_strap_reg);
	val \|= OHCI_OVRCUR_POL;
	writel(val, driver->usb2h_strap_reg);
	}

	return 0;
	}

	static void connect_change(struct ns2_phy_driver *driver)
	{
	u32 extcon_event;
	u32 val;

	extcon_event = driver->data->new_state;
	val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);

	switch (extcon_event) {
	case EVT_DEVICE:
	val &= ~(DRD_HOST_MODE \| DRD_DEVICE_MODE);
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	val = (val & ~DRD_HOST_MODE) \| DRD_DEVICE_MODE;
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
	val \|= ICFG_DEV_BIT;
	writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
	break;

	case EVT_HOST:
	val &= ~(DRD_HOST_MODE \| DRD_DEVICE_MODE);
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	val = (val & ~DRD_DEVICE_MODE) \| DRD_HOST_MODE;
	writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);

	val = readl(driver->usb2h_strap_reg);
	val \|= OHCI_OVRCUR_POL;
	writel(val, driver->usb2h_strap_reg);

	val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
	val &= ~ICFG_DEV_BIT;
	writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
	break;

	default:
	pr_err("Invalid extcon event\n");
	break;
	}
	}

	static void extcon_work(struct work_struct *work)
	{
	struct ns2_phy_driver *driver;
	int vbus;
	int id;

	driver = container_of(to_delayed_work(work),
	struct ns2_phy_driver, wq_extcon);

	id = gpiod_get_value_cansleep(driver->id_gpiod);
	vbus = gpiod_get_value_cansleep(driver->vbus_gpiod);

	if (!id && vbus) { /* Host connected */
	extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true);
	pr_debug("Host cable connected\n");
	driver->data->new_state = EVT_HOST;
	connect_change(driver);
	} else if (id && !vbus) { /* Disconnected */
	extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false);
	extcon_set_state_sync(driver->edev, EXTCON_USB, false);
	pr_debug("Cable disconnected\n");
	} else if (id && vbus) { /* Device connected */
	extcon_set_state_sync(driver->edev, EXTCON_USB, true);
	pr_debug("Device cable connected\n");
	driver->data->new_state = EVT_DEVICE;
	connect_change(driver);
	}
	}

	static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
	{
	struct ns2_phy_driver *driver = dev_id;

	queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
	driver->debounce_jiffies);

	return IRQ_HANDLED;
	}

	static const struct phy_ops ops = {
	.init = ns2_drd_phy_init,
	.power_on = ns2_drd_phy_poweron,
	.power_off = ns2_drd_phy_poweroff,
	.owner = THIS_MODULE,
	};

	static const struct of_device_id ns2_drd_phy_dt_ids[] = {
	{ .compatible = "brcm,ns2-drd-phy", },
	{ }
	};
	MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids);

	static int ns2_drd_phy_probe(struct platform_device *pdev)
	{
	struct phy_provider *phy_provider;
	struct device *dev = &pdev->dev;
	struct ns2_phy_driver *driver;
	struct ns2_phy_data *data;
	struct resource *res;
	int ret;
	u32 val;

	driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver),
	GFP_KERNEL);
	if (!driver)
	return -ENOMEM;

	driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data),
	GFP_KERNEL);
	if (!driver->data)
	return -ENOMEM;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "icfg");
	driver->icfgdrd_regs = devm_ioremap_resource(dev, res);
	if (IS_ERR(driver->icfgdrd_regs))
	return PTR_ERR(driver->icfgdrd_regs);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rst-ctrl");
	driver->idmdrd_rst_ctrl = devm_ioremap_resource(dev, res);
	if (IS_ERR(driver->idmdrd_rst_ctrl))
	return PTR_ERR(driver->idmdrd_rst_ctrl);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crmu-ctrl");
	driver->crmu_usb2_ctrl = devm_ioremap_resource(dev, res);
	if (IS_ERR(driver->crmu_usb2_ctrl))
	return PTR_ERR(driver->crmu_usb2_ctrl);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2-strap");
	driver->usb2h_strap_reg = devm_ioremap_resource(dev, res);
	if (IS_ERR(driver->usb2h_strap_reg))
	return PTR_ERR(driver->usb2h_strap_reg);

	/* create extcon */
	driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
	if (IS_ERR(driver->id_gpiod)) {
	dev_err(dev, "failed to get ID GPIO\n");
	return PTR_ERR(driver->id_gpiod);
	}
	driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN);
	if (IS_ERR(driver->vbus_gpiod)) {
	dev_err(dev, "failed to get VBUS GPIO\n");
	return PTR_ERR(driver->vbus_gpiod);
	}

	driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
	if (IS_ERR(driver->edev)) {
	dev_err(dev, "failed to allocate extcon device\n");
	return -ENOMEM;
	}

	ret = devm_extcon_dev_register(dev, driver->edev);
	if (ret < 0) {
	dev_err(dev, "failed to register extcon device\n");
	return ret;
	}

	ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000);
	if (ret < 0)
	driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY);

	INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work);

	driver->id_irq = gpiod_to_irq(driver->id_gpiod);
	if (driver->id_irq < 0) {
	dev_err(dev, "failed to get ID IRQ\n");
	return driver->id_irq;
	}

	driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod);
	if (driver->vbus_irq < 0) {
	dev_err(dev, "failed to get ID IRQ\n");
	return driver->vbus_irq;
	}

	ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler,
	IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
	"usb_id", driver);
	if (ret < 0) {
	dev_err(dev, "failed to request handler for ID IRQ\n");
	return ret;
	}

	ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler,
	IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
	"usb_vbus", driver);
	if (ret < 0) {
	dev_err(dev, "failed to request handler for VBUS IRQ\n");
	return ret;
	}

	dev_set_drvdata(dev, driver);

	/* Shutdown all ports. They can be powered up as required */
	val = readl(driver->crmu_usb2_ctrl);
	val &= ~(AFE_CORERDY_VDDC \| PHY_RESETB);
	writel(val, driver->crmu_usb2_ctrl);

	data = driver->data;
	data->phy = devm_phy_create(dev, dev->of_node, &ops);
	if (IS_ERR(data->phy)) {
	dev_err(dev, "Failed to create usb drd phy\n");
	return PTR_ERR(data->phy);
	}

	data->driver = driver;
	phy_set_drvdata(data->phy, data);

	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
	if (IS_ERR(phy_provider)) {
	dev_err(dev, "Failed to register as phy provider\n");
	return PTR_ERR(phy_provider);
	}

	platform_set_drvdata(pdev, driver);

	dev_info(dev, "Registered NS2 DRD Phy device\n");
	queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
	driver->debounce_jiffies);

	return 0;
	}

	static struct platform_driver ns2_drd_phy_driver = {
	.probe = ns2_drd_phy_probe,
	.driver = {
	.name = "bcm-ns2-usbphy",
	.of_match_table = of_match_ptr(ns2_drd_phy_dt_ids),
	},
	};
	module_platform_driver(ns2_drd_phy_driver);

	MODULE_ALIAS("platform:bcm-ns2-drd-phy");
	MODULE_AUTHOR("Broadcom");
	MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver");
	MODULE_LICENSE("GPL v2");