| // SPDX-License-Identifier: GPL-2.0-only |
| /* MCP23S08 SPI GPIO driver */ |
| |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| |
| #include "pinctrl-mcp23s08.h" |
| |
| #define MCP_MAX_DEV_PER_CS 8 |
| |
| /* |
| * A given spi_device can represent up to eight mcp23sxx chips |
| * sharing the same chipselect but using different addresses |
| * (e.g. chips #0 and #3 might be populated, but not #1 or #2). |
| * Driver data holds all the per-chip data. |
| */ |
| struct mcp23s08_driver_data { |
| unsigned ngpio; |
| struct mcp23s08 *mcp[8]; |
| struct mcp23s08 chip[]; |
| }; |
| |
| static int mcp23sxx_spi_write(void *context, const void *data, size_t count) |
| { |
| struct mcp23s08 *mcp = context; |
| struct spi_device *spi = to_spi_device(mcp->dev); |
| struct spi_message m; |
| struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, }, |
| { .tx_buf = data, .len = count, }, }; |
| |
| spi_message_init(&m); |
| spi_message_add_tail(&t[0], &m); |
| spi_message_add_tail(&t[1], &m); |
| |
| return spi_sync(spi, &m); |
| } |
| |
| static int mcp23sxx_spi_gather_write(void *context, |
| const void *reg, size_t reg_size, |
| const void *val, size_t val_size) |
| { |
| struct mcp23s08 *mcp = context; |
| struct spi_device *spi = to_spi_device(mcp->dev); |
| struct spi_message m; |
| struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, }, |
| { .tx_buf = reg, .len = reg_size, }, |
| { .tx_buf = val, .len = val_size, }, }; |
| |
| spi_message_init(&m); |
| spi_message_add_tail(&t[0], &m); |
| spi_message_add_tail(&t[1], &m); |
| spi_message_add_tail(&t[2], &m); |
| |
| return spi_sync(spi, &m); |
| } |
| |
| static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct mcp23s08 *mcp = context; |
| struct spi_device *spi = to_spi_device(mcp->dev); |
| u8 tx[2]; |
| |
| if (reg_size != 1) |
| return -EINVAL; |
| |
| tx[0] = mcp->addr | 0x01; |
| tx[1] = *((u8 *) reg); |
| |
| return spi_write_then_read(spi, tx, sizeof(tx), val, val_size); |
| } |
| |
| static const struct regmap_bus mcp23sxx_spi_regmap = { |
| .write = mcp23sxx_spi_write, |
| .gather_write = mcp23sxx_spi_gather_write, |
| .read = mcp23sxx_spi_read, |
| }; |
| |
| static int mcp23s08_spi_regmap_init(struct mcp23s08 *mcp, struct device *dev, |
| unsigned int addr, unsigned int type) |
| { |
| const struct regmap_config *config; |
| struct regmap_config *copy; |
| const char *name; |
| |
| switch (type) { |
| case MCP_TYPE_S08: |
| mcp->reg_shift = 0; |
| mcp->chip.ngpio = 8; |
| mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s08.%d", addr); |
| |
| config = &mcp23x08_regmap; |
| name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr); |
| break; |
| |
| case MCP_TYPE_S17: |
| mcp->reg_shift = 1; |
| mcp->chip.ngpio = 16; |
| mcp->chip.label = devm_kasprintf(dev, GFP_KERNEL, "mcp23s17.%d", addr); |
| |
| config = &mcp23x17_regmap; |
| name = devm_kasprintf(dev, GFP_KERNEL, "%d", addr); |
| break; |
| |
| case MCP_TYPE_S18: |
| mcp->reg_shift = 1; |
| mcp->chip.ngpio = 16; |
| mcp->chip.label = "mcp23s18"; |
| |
| config = &mcp23x17_regmap; |
| name = config->name; |
| break; |
| |
| default: |
| dev_err(dev, "invalid device type (%d)\n", type); |
| return -EINVAL; |
| } |
| |
| copy = devm_kmemdup(dev, &config, sizeof(config), GFP_KERNEL); |
| if (!copy) |
| return -ENOMEM; |
| |
| copy->name = name; |
| |
| mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp, copy); |
| return PTR_ERR_OR_ZERO(mcp->regmap); |
| } |
| |
| static int mcp23s08_probe(struct spi_device *spi) |
| { |
| struct device *dev = &spi->dev; |
| struct mcp23s08_driver_data *data; |
| unsigned long spi_present_mask; |
| const void *match; |
| unsigned int addr; |
| unsigned int ngpio = 0; |
| int chips; |
| int type; |
| int ret; |
| u32 v; |
| |
| match = device_get_match_data(dev); |
| if (match) |
| type = (int)(uintptr_t)match; |
| else |
| type = spi_get_device_id(spi)->driver_data; |
| |
| ret = device_property_read_u32(dev, "microchip,spi-present-mask", &v); |
| if (ret) { |
| ret = device_property_read_u32(dev, "mcp,spi-present-mask", &v); |
| if (ret) { |
| dev_err(dev, "missing spi-present-mask"); |
| return ret; |
| } |
| } |
| spi_present_mask = v; |
| |
| if (!spi_present_mask || spi_present_mask >= BIT(MCP_MAX_DEV_PER_CS)) { |
| dev_err(dev, "invalid spi-present-mask"); |
| return -ENODEV; |
| } |
| |
| chips = hweight_long(spi_present_mask); |
| |
| data = devm_kzalloc(dev, struct_size(data, chip, chips), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| spi_set_drvdata(spi, data); |
| |
| for_each_set_bit(addr, &spi_present_mask, MCP_MAX_DEV_PER_CS) { |
| data->mcp[addr] = &data->chip[--chips]; |
| data->mcp[addr]->irq = spi->irq; |
| |
| ret = mcp23s08_spi_regmap_init(data->mcp[addr], dev, addr, type); |
| if (ret) |
| return ret; |
| |
| data->mcp[addr]->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL, |
| "mcp23xxx-pinctrl.%d", |
| addr); |
| if (!data->mcp[addr]->pinctrl_desc.name) |
| return -ENOMEM; |
| |
| ret = mcp23s08_probe_one(data->mcp[addr], dev, 0x40 | (addr << 1), type, -1); |
| if (ret < 0) |
| return ret; |
| |
| ngpio += data->mcp[addr]->chip.ngpio; |
| } |
| data->ngpio = ngpio; |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id mcp23s08_ids[] = { |
| { "mcp23s08", MCP_TYPE_S08 }, |
| { "mcp23s17", MCP_TYPE_S17 }, |
| { "mcp23s18", MCP_TYPE_S18 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, mcp23s08_ids); |
| |
| static const struct of_device_id mcp23s08_spi_of_match[] = { |
| { |
| .compatible = "microchip,mcp23s08", |
| .data = (void *) MCP_TYPE_S08, |
| }, |
| { |
| .compatible = "microchip,mcp23s17", |
| .data = (void *) MCP_TYPE_S17, |
| }, |
| { |
| .compatible = "microchip,mcp23s18", |
| .data = (void *) MCP_TYPE_S18, |
| }, |
| /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ |
| { |
| .compatible = "mcp,mcp23s08", |
| .data = (void *) MCP_TYPE_S08, |
| }, |
| { |
| .compatible = "mcp,mcp23s17", |
| .data = (void *) MCP_TYPE_S17, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); |
| |
| static struct spi_driver mcp23s08_driver = { |
| .probe = mcp23s08_probe, |
| .id_table = mcp23s08_ids, |
| .driver = { |
| .name = "mcp23s08", |
| .of_match_table = mcp23s08_spi_of_match, |
| }, |
| }; |
| |
| static int __init mcp23s08_spi_init(void) |
| { |
| return spi_register_driver(&mcp23s08_driver); |
| } |
| |
| /* |
| * Register after SPI postcore initcall and before |
| * subsys initcalls that may rely on these GPIOs. |
| */ |
| subsys_initcall(mcp23s08_spi_init); |
| |
| static void mcp23s08_spi_exit(void) |
| { |
| spi_unregister_driver(&mcp23s08_driver); |
| } |
| module_exit(mcp23s08_spi_exit); |
| |
| MODULE_LICENSE("GPL"); |