| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # X86 Platform Specific Drivers |
| # |
| |
| menuconfig X86_PLATFORM_DEVICES |
| bool "X86 Platform Specific Device Drivers" |
| default y |
| depends on X86 |
| help |
| Say Y here to get to see options for device drivers for various |
| x86 platforms, including vendor-specific laptop extension drivers. |
| This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if X86_PLATFORM_DEVICES |
| |
| config ACPI_WMI |
| tristate "WMI" |
| depends on ACPI |
| help |
| This driver adds support for the ACPI-WMI (Windows Management |
| Instrumentation) mapper device (PNP0C14) found on some systems. |
| |
| ACPI-WMI is a proprietary extension to ACPI to expose parts of the |
| ACPI firmware to userspace - this is done through various vendor |
| defined methods and data blocks in a PNP0C14 device, which are then |
| made available for userspace to call. |
| |
| The implementation of this in Linux currently only exposes this to |
| other kernel space drivers. |
| |
| This driver is a required dependency to build the firmware specific |
| drivers needed on many machines, including Acer and HP laptops. |
| |
| It is safe to enable this driver even if your DSDT doesn't define |
| any ACPI-WMI devices. |
| |
| config WMI_BMOF |
| tristate "WMI embedded Binary MOF driver" |
| depends on ACPI_WMI |
| default ACPI_WMI |
| help |
| Say Y here if you want to be able to read a firmware-embedded |
| WMI Binary MOF data. Using this requires userspace tools and may be |
| rather tedious. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called wmi-bmof. |
| |
| config ALIENWARE_WMI |
| tristate "Alienware Special feature control" |
| depends on ACPI |
| depends on LEDS_CLASS |
| depends on NEW_LEDS |
| depends on ACPI_WMI |
| help |
| This is a driver for controlling Alienware BIOS driven |
| features. It exposes an interface for controlling the AlienFX |
| zones on Alienware machines that don't contain a dedicated AlienFX |
| USB MCU such as the X51 and X51-R2. |
| |
| config HUAWEI_WMI |
| tristate "Huawei WMI laptop extras driver" |
| depends on ACPI_BATTERY |
| depends on ACPI_WMI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| select LEDS_TRIGGER_AUDIO |
| select NEW_LEDS |
| help |
| This driver provides support for Huawei WMI hotkeys, battery charge |
| control, fn-lock, mic-mute LED, and other extra features. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called huawei-wmi. |
| |
| config INTEL_WMI_SBL_FW_UPDATE |
| tristate "Intel WMI Slim Bootloader firmware update signaling driver" |
| depends on ACPI_WMI |
| help |
| Say Y here if you want to be able to use the WMI interface to signal |
| Slim Bootloader to trigger update on next reboot. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel-wmi-sbl-fw-update. |
| |
| config INTEL_WMI_THUNDERBOLT |
| tristate "Intel WMI thunderbolt force power driver" |
| depends on ACPI_WMI |
| help |
| Say Y here if you want to be able to use the WMI interface on select |
| systems to force the power control of Intel Thunderbolt controllers. |
| This is useful for updating the firmware when devices are not plugged |
| into the controller. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel-wmi-thunderbolt. |
| |
| config MXM_WMI |
| tristate "WMI support for MXM Laptop Graphics" |
| depends on ACPI_WMI |
| help |
| MXM is a standard for laptop graphics cards, the WMI interface |
| is required for switchable nvidia graphics machines |
| |
| config PEAQ_WMI |
| tristate "PEAQ 2-in-1 WMI hotkey driver" |
| depends on ACPI_WMI |
| depends on INPUT |
| help |
| Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s. |
| |
| config XIAOMI_WMI |
| tristate "Xiaomi WMI key driver" |
| depends on ACPI_WMI |
| depends on INPUT |
| help |
| Say Y here if you want to support WMI-based keys on Xiaomi notebooks. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called xiaomi-wmi. |
| |
| config ACERHDF |
| tristate "Acer Aspire One temperature and fan driver" |
| depends on ACPI && THERMAL |
| select THERMAL_GOV_BANG_BANG |
| help |
| This is a driver for Acer Aspire One netbooks. It allows to access |
| the temperature sensor and to control the fan. |
| |
| After loading this driver the BIOS is still in control of the fan. |
| To let the kernel handle the fan, do: |
| echo -n enabled > /sys/class/thermal/thermal_zoneN/mode |
| where N=0,1,2... depending on the number of thermal nodes and the |
| detection order of your particular system. The "type" parameter |
| in the same node directory will tell you if it is "acerhdf". |
| |
| For more information about this driver see |
| <https://piie.net/files/acerhdf_README.txt> |
| |
| If you have an Acer Aspire One netbook, say Y or M |
| here. |
| |
| config ACER_WIRELESS |
| tristate "Acer Wireless Radio Control Driver" |
| depends on ACPI |
| depends on INPUT |
| help |
| The Acer Wireless Radio Control handles the airplane mode hotkey |
| present on new Acer laptops. |
| |
| Say Y or M here if you have an Acer notebook with an airplane mode |
| hotkey. |
| |
| If you choose to compile this driver as a module the module will be |
| called acer-wireless. |
| |
| config ACER_WMI |
| tristate "Acer WMI Laptop Extras" |
| depends on ACPI |
| select LEDS_CLASS |
| select NEW_LEDS |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on SERIO_I8042 |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| depends on ACPI_WMI |
| select INPUT_SPARSEKMAP |
| # Acer WMI depends on ACPI_VIDEO when ACPI is enabled |
| select ACPI_VIDEO if ACPI |
| help |
| This is a driver for newer Acer (and Wistron) laptops. It adds |
| wireless radio and bluetooth control, and on some laptops, |
| exposes the mail LED and LCD backlight. |
| |
| If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M |
| here. |
| |
| config APPLE_GMUX |
| tristate "Apple Gmux Driver" |
| depends on ACPI && PCI |
| depends on PNP |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE |
| depends on ACPI_VIDEO=n || ACPI_VIDEO |
| help |
| This driver provides support for the gmux device found on many |
| Apple laptops, which controls the display mux for the hybrid |
| graphics as well as the backlight. Currently only backlight |
| control is supported by the driver. |
| |
| config ASUS_LAPTOP |
| tristate "Asus Laptop Extras" |
| depends on ACPI |
| select LEDS_CLASS |
| select NEW_LEDS |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| select INPUT_SPARSEKMAP |
| help |
| This is a driver for Asus laptops, Lenovo SL and the Pegatron |
| Lucid tablet. It may also support some MEDION, JVC or VICTOR |
| laptops. It makes all the extra buttons generate standard |
| ACPI events and input events, and on the Lucid the built-in |
| accelerometer appears as an input device. It also adds |
| support for video output switching, LCD backlight control, |
| Bluetooth and Wlan control, and most importantly, allows you |
| to blink those fancy LEDs. |
| |
| For more information see <http://acpi4asus.sf.net>. |
| |
| If you have an ACPI-compatible ASUS laptop, say Y or M here. |
| |
| config ASUS_WIRELESS |
| tristate "Asus Wireless Radio Control Driver" |
| depends on ACPI |
| depends on INPUT |
| select NEW_LEDS |
| select LEDS_CLASS |
| help |
| The Asus Wireless Radio Control handles the airplane mode hotkey |
| present on some Asus laptops. |
| |
| Say Y or M here if you have an ASUS notebook with an airplane mode |
| hotkey. |
| |
| If you choose to compile this driver as a module the module will be |
| called asus-wireless. |
| |
| config ASUS_WMI |
| tristate "ASUS WMI Driver" |
| depends on ACPI_WMI |
| depends on ACPI_BATTERY |
| depends on INPUT |
| depends on HWMON |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on RFKILL || RFKILL = n |
| depends on HOTPLUG_PCI |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| select INPUT_SPARSEKMAP |
| select LEDS_CLASS |
| select NEW_LEDS |
| help |
| Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new |
| Asus Notebooks). |
| |
| To compile this driver as a module, choose M here: the module will |
| be called asus-wmi. |
| |
| config ASUS_NB_WMI |
| tristate "Asus Notebook WMI Driver" |
| depends on ASUS_WMI |
| depends on SERIO_I8042 || SERIO_I8042 = n |
| help |
| This is a driver for newer Asus notebooks. It adds extra features |
| like wireless radio and bluetooth control, leds, hotkeys, backlight... |
| |
| For more information, see |
| <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> |
| |
| If you have an ACPI-WMI compatible Asus Notebook, say Y or M |
| here. |
| |
| config EEEPC_LAPTOP |
| tristate "Eee PC Hotkey Driver" |
| depends on ACPI |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on HOTPLUG_PCI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select HWMON |
| select LEDS_CLASS |
| select NEW_LEDS |
| select INPUT_SPARSEKMAP |
| help |
| This driver supports the Fn-Fx keys on Eee PC laptops. |
| |
| It also gives access to some extra laptop functionalities like |
| Bluetooth, backlight and allows powering on/off some other |
| devices. |
| |
| If you have an Eee PC laptop, say Y or M here. If this driver |
| doesn't work on your Eee PC, try eeepc-wmi instead. |
| |
| config EEEPC_WMI |
| tristate "Eee PC WMI Driver" |
| depends on ASUS_WMI |
| help |
| This is a driver for newer Eee PC laptops. It adds extra features |
| like wireless radio and bluetooth control, leds, hotkeys, backlight... |
| |
| For more information, see |
| <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> |
| |
| If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M |
| here. |
| |
| config DCDBAS |
| tristate "Dell Systems Management Base Driver" |
| depends on X86 |
| help |
| The Dell Systems Management Base Driver provides a sysfs interface |
| for systems management software to perform System Management |
| Interrupts (SMIs) and Host Control Actions (system power cycle or |
| power off after OS shutdown) on certain Dell systems. |
| |
| See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver |
| and the Dell systems on which Dell systems management software makes |
| use of this driver. |
| |
| Say Y or M here to enable the driver for use by Dell systems |
| management software such as Dell OpenManage. |
| |
| # |
| # The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those |
| # backends are selected. The "depends" line prevents a configuration |
| # where DELL_SMBIOS=y while either of those dependencies =m. |
| # |
| config DELL_SMBIOS |
| tristate "Dell SMBIOS driver" |
| depends on DCDBAS || DCDBAS=n |
| depends on ACPI_WMI || ACPI_WMI=n |
| help |
| This provides support for the Dell SMBIOS calling interface. |
| If you have a Dell computer you should enable this option. |
| |
| Be sure to select at least one backend for it to work properly. |
| |
| config DELL_SMBIOS_WMI |
| bool "Dell SMBIOS driver WMI backend" |
| default y |
| depends on ACPI_WMI |
| select DELL_WMI_DESCRIPTOR |
| depends on DELL_SMBIOS |
| help |
| This provides an implementation for the Dell SMBIOS calling interface |
| communicated over ACPI-WMI. |
| |
| If you have a Dell computer from >2007 you should say Y here. |
| If you aren't sure and this module doesn't work for your computer |
| it just won't load. |
| |
| config DELL_SMBIOS_SMM |
| bool "Dell SMBIOS driver SMM backend" |
| default y |
| depends on DCDBAS |
| depends on DELL_SMBIOS |
| help |
| This provides an implementation for the Dell SMBIOS calling interface |
| communicated over SMI/SMM. |
| |
| If you have a Dell computer from <=2017 you should say Y here. |
| If you aren't sure and this module doesn't work for your computer |
| it just won't load. |
| |
| config DELL_LAPTOP |
| tristate "Dell Laptop Extras" |
| depends on DMI |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on RFKILL || RFKILL = n |
| depends on SERIO_I8042 |
| depends on DELL_SMBIOS |
| select POWER_SUPPLY |
| select LEDS_CLASS |
| select NEW_LEDS |
| select LEDS_TRIGGERS |
| select LEDS_TRIGGER_AUDIO |
| help |
| This driver adds support for rfkill and backlight control to Dell |
| laptops (except for some models covered by the Compal driver). |
| |
| config DELL_RBTN |
| tristate "Dell Airplane Mode Switch driver" |
| depends on ACPI |
| depends on INPUT |
| depends on RFKILL |
| help |
| Say Y here if you want to support Dell Airplane Mode Switch ACPI |
| device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN. |
| This driver register rfkill device or input hotkey device depending |
| on hardware type (hw switch slider or keyboard toggle button). For |
| rfkill devices it receive HW switch events and set correct hard |
| rfkill state. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called dell-rbtn. |
| |
| config DELL_RBU |
| tristate "BIOS update support for DELL systems via sysfs" |
| depends on X86 |
| select FW_LOADER |
| select FW_LOADER_USER_HELPER |
| help |
| Say m if you want to have the option of updating the BIOS for your |
| DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) |
| supporting application to communicate with the BIOS regarding the new |
| image for the image update to take effect. |
| See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver. |
| |
| config DELL_SMO8800 |
| tristate "Dell Latitude freefall driver (ACPI SMO88XX)" |
| depends on ACPI |
| help |
| Say Y here if you want to support SMO88XX freefall devices |
| on Dell Latitude laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called dell-smo8800. |
| |
| config DELL_WMI |
| tristate "Dell WMI notifications" |
| depends on ACPI_WMI |
| depends on DMI |
| depends on INPUT |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on DELL_SMBIOS |
| select DELL_WMI_DESCRIPTOR |
| select INPUT_SPARSEKMAP |
| help |
| Say Y here if you want to support WMI-based hotkeys on Dell laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called dell-wmi. |
| |
| config DELL_WMI_DESCRIPTOR |
| tristate |
| depends on ACPI_WMI |
| |
| config DELL_WMI_AIO |
| tristate "WMI Hotkeys for Dell All-In-One series" |
| depends on ACPI_WMI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| help |
| Say Y here if you want to support WMI-based hotkeys on Dell |
| All-In-One machines. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called dell-wmi-aio. |
| |
| config DELL_WMI_LED |
| tristate "External LED on Dell Business Netbooks" |
| depends on LEDS_CLASS |
| depends on ACPI_WMI |
| help |
| This adds support for the Latitude 2100 and similar |
| notebooks that have an external LED. |
| |
| config AMILO_RFKILL |
| tristate "Fujitsu-Siemens Amilo rfkill support" |
| depends on RFKILL |
| depends on SERIO_I8042 |
| help |
| This is a driver for enabling wifi on some Fujitsu-Siemens Amilo |
| laptops. |
| |
| config FUJITSU_LAPTOP |
| tristate "Fujitsu Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| select INPUT_SPARSEKMAP |
| select LEDS_CLASS |
| help |
| This is a driver for laptops built by Fujitsu: |
| |
| * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks |
| * Possibly other Fujitsu laptop models |
| * Tested with S6410 and S7020 |
| |
| It adds support for LCD brightness control and some hotkeys. |
| |
| If you have a Fujitsu laptop, say Y or M here. |
| |
| config FUJITSU_TABLET |
| tristate "Fujitsu Tablet Extras" |
| depends on ACPI |
| depends on INPUT |
| help |
| This is a driver for tablets built by Fujitsu: |
| |
| * Lifebook P1510/P1610/P1620/Txxxx |
| * Stylistic ST5xxx |
| * Possibly other Fujitsu tablet models |
| |
| It adds support for the panel buttons, docking station detection, |
| tablet/notebook mode detection for convertible and |
| orientation detection for docked slates. |
| |
| If you have a Fujitsu convertible or slate, say Y or M here. |
| |
| config GPD_POCKET_FAN |
| tristate "GPD Pocket Fan Controller support" |
| depends on ACPI |
| depends on THERMAL |
| help |
| Driver for the GPD Pocket vendor specific FAN02501 ACPI device |
| which controls the fan speed on the GPD Pocket. |
| |
| Without this driver the fan on the Pocket will stay off independent |
| of the CPU temperature. Say Y or M if the kernel may be used on a |
| GPD pocket. |
| |
| config HP_ACCEL |
| tristate "HP laptop accelerometer" |
| depends on INPUT && ACPI |
| depends on SERIO_I8042 |
| select SENSORS_LIS3LV02D |
| select NEW_LEDS |
| select LEDS_CLASS |
| help |
| This driver provides support for the "Mobile Data Protection System 3D" |
| or "3D DriveGuard" feature of HP laptops. On such systems the driver |
| should load automatically (via ACPI alias). |
| |
| Support for a led indicating disk protection will be provided as |
| hp::hddprotect. For more information on the feature, refer to |
| Documentation/misc-devices/lis3lv02d.rst. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called hp_accel. |
| |
| config HP_WIRELESS |
| tristate "HP wireless button" |
| depends on ACPI |
| depends on INPUT |
| help |
| This driver provides supports for new HP wireless button for Windows 8. |
| On such systems the driver should load automatically (via ACPI alias). |
| |
| To compile this driver as a module, choose M here: the module will |
| be called hp-wireless. |
| |
| config HP_WMI |
| tristate "HP WMI extras" |
| depends on ACPI_WMI |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| select INPUT_SPARSEKMAP |
| help |
| Say Y here if you want to support WMI-based hotkeys on HP laptops and |
| to read data from WMI such as docking or ambient light sensor state. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called hp-wmi. |
| |
| config TC1100_WMI |
| tristate "HP Compaq TC1100 Tablet WMI Extras" |
| depends on !X86_64 |
| depends on ACPI |
| depends on ACPI_WMI |
| help |
| This is a driver for the WMI extensions (wireless and bluetooth power |
| control) of the HP Compaq TC1100 tablet. |
| |
| config IBM_RTL |
| tristate "Device driver to enable PRTL support" |
| depends on PCI |
| help |
| Enable support for IBM Premium Real Time Mode (PRTM). |
| This module will allow you the enter and exit PRTM in the BIOS via |
| sysfs on platforms that support this feature. System in PRTM will |
| not receive CPU-generated SMIs for recoverable errors. Use of this |
| feature without proper support may void your hardware warranty. |
| |
| If the proper BIOS support is found the driver will load and create |
| /sys/devices/system/ibm_rtl/. The "state" variable will indicate |
| whether or not the BIOS is in PRTM. |
| state = 0 (BIOS SMIs on) |
| state = 1 (BIOS SMIs off) |
| |
| config IDEAPAD_LAPTOP |
| tristate "Lenovo IdeaPad Laptop Extras" |
| depends on ACPI |
| depends on RFKILL && INPUT |
| depends on SERIO_I8042 |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on ACPI_WMI || ACPI_WMI = n |
| select INPUT_SPARSEKMAP |
| help |
| This is a driver for Lenovo IdeaPad netbooks contains drivers for |
| rfkill switch, hotkey, fan control and backlight control. |
| |
| config SENSORS_HDAPS |
| tristate "Thinkpad Hard Drive Active Protection System (hdaps)" |
| depends on INPUT |
| help |
| This driver provides support for the IBM Hard Drive Active Protection |
| System (hdaps), which provides an accelerometer and other misc. data. |
| ThinkPads starting with the R50, T41, and X40 are supported. The |
| accelerometer data is readable via sysfs. |
| |
| This driver also provides an absolute input class device, allowing |
| the laptop to act as a pinball machine-esque joystick. |
| |
| If your ThinkPad is not recognized by the driver, please update to latest |
| BIOS. This is especially the case for some R52 ThinkPads. |
| |
| Say Y here if you have an applicable laptop and want to experience |
| the awesome power of hdaps. |
| |
| config THINKPAD_ACPI |
| tristate "ThinkPad ACPI Laptop Extras" |
| depends on ACPI |
| depends on ACPI_BATTERY |
| depends on INPUT |
| depends on RFKILL || RFKILL = n |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on BACKLIGHT_CLASS_DEVICE |
| select HWMON |
| select NVRAM |
| select NEW_LEDS |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| select LEDS_TRIGGER_AUDIO |
| help |
| This is a driver for the IBM and Lenovo ThinkPad laptops. It adds |
| support for Fn-Fx key combinations, Bluetooth control, video |
| output switching, ThinkLight control, UltraBay eject and more. |
| For more information about this driver see |
| <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and |
| <http://ibm-acpi.sf.net/> . |
| |
| This driver was formerly known as ibm-acpi. |
| |
| Extra functionality will be available if the rfkill (CONFIG_RFKILL) |
| and/or ALSA (CONFIG_SND) subsystems are available in the kernel. |
| Note that if you want ThinkPad-ACPI to be built-in instead of |
| modular, ALSA and rfkill will also have to be built-in. |
| |
| If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. |
| |
| config THINKPAD_ACPI_ALSA_SUPPORT |
| bool "Console audio control ALSA interface" |
| depends on THINKPAD_ACPI |
| depends on SND |
| depends on SND = y || THINKPAD_ACPI = SND |
| default y |
| help |
| Enables monitoring of the built-in console audio output control |
| (headphone and speakers), which is operated by the mute and (in |
| some ThinkPad models) volume hotkeys. |
| |
| If this option is enabled, ThinkPad-ACPI will export an ALSA card |
| with a single read-only mixer control, which should be used for |
| on-screen-display feedback purposes by the Desktop Environment. |
| |
| Optionally, the driver will also allow software control (the |
| ALSA mixer will be made read-write). Please refer to the driver |
| documentation for details. |
| |
| All IBM models have both volume and mute control. Newer Lenovo |
| models only have mute control (the volume hotkeys are just normal |
| keys and volume control is done through the main HDA mixer). |
| |
| config THINKPAD_ACPI_DEBUGFACILITIES |
| bool "Maintainer debug facilities" |
| depends on THINKPAD_ACPI |
| help |
| Enables extra stuff in the thinkpad-acpi which is completely useless |
| for normal use. Read the driver source to find out what it does. |
| |
| Say N here, unless you were told by a kernel maintainer to do |
| otherwise. |
| |
| config THINKPAD_ACPI_DEBUG |
| bool "Verbose debug mode" |
| depends on THINKPAD_ACPI |
| help |
| Enables extra debugging information, at the expense of a slightly |
| increase in driver size. |
| |
| If you are not sure, say N here. |
| |
| config THINKPAD_ACPI_UNSAFE_LEDS |
| bool "Allow control of important LEDs (unsafe)" |
| depends on THINKPAD_ACPI |
| help |
| Overriding LED state on ThinkPads can mask important |
| firmware alerts (like critical battery condition), or misled |
| the user into damaging the hardware (undocking or ejecting |
| the bay while buses are still active), etc. |
| |
| LED control on the ThinkPad is write-only (with very few |
| exceptions on very ancient models), which makes it |
| impossible to know beforehand if important information will |
| be lost when one changes LED state. |
| |
| Users that know what they are doing can enable this option |
| and the driver will allow control of every LED, including |
| the ones on the dock stations. |
| |
| Never enable this option on a distribution kernel. |
| |
| Say N here, unless you are building a kernel for your own |
| use, and need to control the important firmware LEDs. |
| |
| config THINKPAD_ACPI_VIDEO |
| bool "Video output control support" |
| depends on THINKPAD_ACPI |
| default y |
| help |
| Allows the thinkpad_acpi driver to provide an interface to control |
| the various video output ports. |
| |
| This feature often won't work well, depending on ThinkPad model, |
| display state, video output devices in use, whether there is a X |
| server running, phase of the moon, and the current mood of |
| Schroedinger's cat. If you can use X.org's RandR to control |
| your ThinkPad's video output ports instead of this feature, |
| don't think twice: do it and say N here to save memory and avoid |
| bad interactions with X.org. |
| |
| NOTE: access to this feature is limited to processes with the |
| CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms |
| where it interacts badly with X.org. |
| |
| If you are not sure, say Y here but do try to check if you could |
| be using X.org RandR instead. |
| |
| config THINKPAD_ACPI_HOTKEY_POLL |
| bool "Support NVRAM polling for hot keys" |
| depends on THINKPAD_ACPI |
| default y |
| help |
| Some thinkpad models benefit from NVRAM polling to detect a few of |
| the hot key press events. If you know your ThinkPad model does not |
| need to do NVRAM polling to support any of the hot keys you use, |
| unselecting this option will save about 1kB of memory. |
| |
| ThinkPads T40 and newer, R52 and newer, and X31 and newer are |
| unlikely to need NVRAM polling in their latest BIOS versions. |
| |
| NVRAM polling can detect at most the following keys: ThinkPad/Access |
| IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, |
| Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). |
| |
| If you are not sure, say Y here. The driver enables polling only if |
| it is strictly necessary to do so. |
| |
| config INTEL_ATOMISP2_LED |
| tristate "Intel AtomISP2 camera LED driver" |
| depends on GPIOLIB && LEDS_GPIO |
| help |
| Many Bay Trail and Cherry Trail devices come with a camera attached |
| to Intel's Image Signal Processor. Linux currently does not have a |
| driver for these, so they do not work as a camera. Some of these |
| camera's have a LED which is controlled through a GPIO. |
| |
| Some of these devices have a firmware issue where the LED gets turned |
| on at boot. This driver will turn the LED off at boot and also allows |
| controlling the LED (repurposing it) through the sysfs LED interface. |
| |
| Which GPIO is attached to the LED is usually not described in the |
| ACPI tables, so this driver contains per-system info about the GPIO |
| inside the driver, this means that this driver only works on systems |
| the driver knows about. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_atomisp2_led. |
| |
| config INTEL_ATOMISP2_PM |
| tristate "Intel AtomISP2 dummy / power-management driver" |
| depends on PCI && IOSF_MBI && PM |
| depends on !INTEL_ATOMISP |
| help |
| Power-management driver for Intel's Image Signal Processor found on |
| Bay Trail and Cherry Trail devices. This dummy driver's sole purpose |
| is to turn the ISP off (put it in D3) to save power and to allow |
| entering of S0ix modes. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_atomisp2_pm. |
| |
| config INTEL_CHT_INT33FE |
| tristate "Intel Cherry Trail ACPI INT33FE Driver" |
| depends on X86 && ACPI && I2C && REGULATOR |
| depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) |
| depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m) |
| depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m) |
| help |
| This driver add support for the INT33FE ACPI device found on |
| some Intel Cherry Trail devices. |
| |
| There are two kinds of INT33FE ACPI device possible: for hardware |
| with USB Type-C and Micro-B connectors. This driver supports both. |
| |
| The INT33FE ACPI device has a CRS table with I2cSerialBusV2 |
| resources for Fuel Gauge Controller and (in the Type-C variant) |
| FUSB302 USB Type-C Controller and PI3USB30532 USB switch. |
| This driver instantiates i2c-clients for these, so that standard |
| i2c drivers for these chips can bind to the them. |
| |
| If you enable this driver it is advised to also select |
| CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B |
| device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m |
| for Type-C device. |
| |
| config INTEL_HID_EVENT |
| tristate "INTEL HID Event" |
| depends on ACPI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| help |
| This driver provides support for the Intel HID Event hotkey interface. |
| Some laptops require this driver for hotkey support. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_hid. |
| |
| config INTEL_INT0002_VGPIO |
| tristate "Intel ACPI INT0002 Virtual GPIO driver" |
| depends on GPIOLIB && ACPI |
| select GPIOLIB_IRQCHIP |
| help |
| Some peripherals on Bay Trail and Cherry Trail platforms signal a |
| Power Management Event (PME) to the Power Management Controller (PMC) |
| to wakeup the system. When this happens software needs to explicitly |
| clear the PME bus 0 status bit in the GPE0a_STS register to avoid an |
| IRQ storm on IRQ 9. |
| |
| This is modelled in ACPI through the INT0002 ACPI device, which is |
| called a "Virtual GPIO controller" in ACPI because it defines the |
| event handler to call when the PME triggers through _AEI and _L02 |
| methods as would be done for a real GPIO interrupt in ACPI. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_int0002_vgpio. |
| |
| config INTEL_MENLOW |
| tristate "Thermal Management driver for Intel menlow platform" |
| depends on ACPI_THERMAL |
| select THERMAL |
| help |
| ACPI thermal management enhancement driver on |
| Intel Menlow platform. |
| |
| If unsure, say N. |
| |
| config INTEL_OAKTRAIL |
| tristate "Intel Oaktrail Platform Extras" |
| depends on ACPI |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI |
| help |
| Intel Oaktrail platform need this driver to provide interfaces to |
| enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y |
| here; it will only load on supported platforms. |
| |
| config INTEL_VBTN |
| tristate "INTEL VIRTUAL BUTTON" |
| depends on ACPI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| help |
| This driver provides support for the Intel Virtual Button interface. |
| Some laptops require this driver for power button support. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_vbtn. |
| |
| config SURFACE3_WMI |
| tristate "Surface 3 WMI Driver" |
| depends on ACPI_WMI |
| depends on DMI |
| depends on INPUT |
| depends on SPI |
| help |
| Say Y here if you have a Surface 3. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called surface3-wmi. |
| |
| config SURFACE_3_BUTTON |
| tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet" |
| depends on ACPI && KEYBOARD_GPIO && I2C |
| help |
| This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet. |
| |
| config SURFACE_3_POWER_OPREGION |
| tristate "Surface 3 battery platform operation region support" |
| depends on ACPI && I2C |
| help |
| This driver provides support for ACPI operation |
| region of the Surface 3 battery platform driver. |
| |
| config SURFACE_PRO3_BUTTON |
| tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet" |
| depends on ACPI && INPUT |
| help |
| This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet. |
| |
| config MSI_LAPTOP |
| tristate "MSI Laptop Extras" |
| depends on ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on RFKILL |
| depends on INPUT && SERIO_I8042 |
| select INPUT_SPARSEKMAP |
| help |
| This is a driver for laptops built by MSI (MICRO-STAR |
| INTERNATIONAL): |
| |
| MSI MegaBook S270 (MS-1013) |
| Cytron/TCM/Medion/Tchibo MD96100/SAM2000 |
| |
| It adds support for Bluetooth, WLAN and LCD brightness control. |
| |
| More information about this driver is available at |
| <http://0pointer.de/lennart/tchibo.html>. |
| |
| If you have an MSI S270 laptop, say Y or M here. |
| |
| config MSI_WMI |
| tristate "MSI WMI extras" |
| depends on ACPI_WMI |
| depends on INPUT |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| select INPUT_SPARSEKMAP |
| help |
| Say Y here if you want to support WMI-based hotkeys on MSI laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called msi-wmi. |
| |
| config XO15_EBOOK |
| tristate "OLPC XO-1.5 ebook switch" |
| depends on OLPC || COMPILE_TEST |
| depends on ACPI && INPUT |
| help |
| Support for the ebook switch on the OLPC XO-1.5 laptop. |
| |
| This switch is triggered as the screen is rotated and folded down to |
| convert the device into ebook form. |
| |
| config XO1_RFKILL |
| tristate "OLPC XO-1 software RF kill switch" |
| depends on OLPC || COMPILE_TEST |
| depends on RFKILL |
| help |
| Support for enabling/disabling the WLAN interface on the OLPC XO-1 |
| laptop. |
| |
| config PCENGINES_APU2 |
| tristate "PC Engines APUv2/3 front button and LEDs driver" |
| depends on INPUT && INPUT_KEYBOARD && GPIOLIB |
| depends on LEDS_CLASS |
| select GPIO_AMD_FCH |
| select KEYBOARD_GPIO_POLLED |
| select LEDS_GPIO |
| help |
| This driver provides support for the front button and LEDs on |
| PC Engines APUv2/APUv3 board. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called pcengines-apuv2. |
| |
| config SAMSUNG_LAPTOP |
| tristate "Samsung Laptop driver" |
| depends on RFKILL || RFKILL = n |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on BACKLIGHT_CLASS_DEVICE |
| select LEDS_CLASS |
| select NEW_LEDS |
| help |
| This module implements a driver for a wide range of different |
| Samsung laptops. It offers control over the different |
| function keys, wireless LED, LCD backlight level. |
| |
| It may also provide some sysfs files described in |
| <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop> |
| |
| To compile this driver as a module, choose M here: the module |
| will be called samsung-laptop. |
| |
| config SAMSUNG_Q10 |
| tristate "Samsung Q10 Extras" |
| depends on ACPI |
| select BACKLIGHT_CLASS_DEVICE |
| help |
| This driver provides support for backlight control on Samsung Q10 |
| and related laptops, including Dell Latitude X200. |
| |
| config ACPI_TOSHIBA |
| tristate "Toshiba Laptop Extras" |
| depends on ACPI |
| depends on ACPI_WMI |
| select LEDS_CLASS |
| select NEW_LEDS |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on INPUT |
| depends on SERIO_I8042 || SERIO_I8042 = n |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on RFKILL || RFKILL = n |
| depends on IIO |
| select INPUT_SPARSEKMAP |
| help |
| This driver adds support for access to certain system settings |
| on "legacy free" Toshiba laptops. These laptops can be recognized by |
| their lack of a BIOS setup menu and APM support. |
| |
| On these machines, all system configuration is handled through the |
| ACPI. This driver is required for access to controls not covered |
| by the general ACPI drivers, such as LCD brightness, video output, |
| etc. |
| |
| This driver differs from the non-ACPI Toshiba laptop driver (located |
| under "Processor type and features") in several aspects. |
| Configuration is accessed by reading and writing text files in the |
| /proc tree instead of by program interface to /dev. Furthermore, no |
| power management functions are exposed, as those are handled by the |
| general ACPI drivers. |
| |
| More information about this driver is available at |
| <http://memebeam.org/toys/ToshibaAcpiDriver>. |
| |
| If you have a legacy free Toshiba laptop (such as the Libretto L1 |
| series), say Y. |
| |
| config TOSHIBA_BT_RFKILL |
| tristate "Toshiba Bluetooth RFKill switch support" |
| depends on ACPI |
| depends on RFKILL || RFKILL = n |
| help |
| This driver adds support for Bluetooth events for the RFKill |
| switch on modern Toshiba laptops with full ACPI support and |
| an RFKill switch. |
| |
| This driver handles RFKill events for the TOS6205 Bluetooth, |
| and re-enables it when the switch is set back to the 'on' |
| position. |
| |
| If you have a modern Toshiba laptop with a Bluetooth and an |
| RFKill switch (such as the Portege R500), say Y. |
| |
| config TOSHIBA_HAPS |
| tristate "Toshiba HDD Active Protection Sensor" |
| depends on ACPI |
| help |
| This driver adds support for the built-in accelerometer |
| found on recent Toshiba laptops equipped with HID TOS620A |
| device. |
| |
| This driver receives ACPI notify events 0x80 when the sensor |
| detects a sudden move or a harsh vibration, as well as an |
| ACPI notify event 0x81 whenever the movement or vibration has |
| been stabilized. |
| |
| Also provides sysfs entries to get/set the desired protection |
| level and resetting the HDD protection interface. |
| |
| If you have a recent Toshiba laptop with a built-in accelerometer |
| device, say Y. |
| |
| config TOSHIBA_WMI |
| tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)" |
| depends on ACPI_WMI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| help |
| This driver adds hotkey monitoring support to some Toshiba models |
| that manage the hotkeys via WMI events. |
| |
| WARNING: This driver is incomplete as it lacks a proper keymap and the |
| *notify function only prints the ACPI event type value. Be warned that |
| you will need to provide some information if you have a Toshiba model |
| with WMI event hotkeys and want to help with the development of this |
| driver. |
| |
| If you have a WMI-based hotkeys Toshiba laptop, say Y or M here. |
| |
| config ACPI_CMPC |
| tristate "CMPC Laptop Extras" |
| depends on ACPI && INPUT |
| depends on RFKILL || RFKILL=n |
| select BACKLIGHT_CLASS_DEVICE |
| help |
| Support for Intel Classmate PC ACPI devices, including some |
| keys as input device, backlight device, tablet and accelerometer |
| devices. |
| |
| config COMPAL_LAPTOP |
| tristate "Compal (and others) Laptop Extras" |
| depends on ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on RFKILL |
| depends on HWMON |
| depends on POWER_SUPPLY |
| help |
| This is a driver for laptops built by Compal, and some models by |
| other brands (e.g. Dell, Toshiba). |
| |
| It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon |
| and battery charging level control. |
| |
| config LG_LAPTOP |
| tristate "LG Laptop Extras" |
| depends on ACPI |
| depends on ACPI_WMI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| select LEDS_CLASS |
| help |
| This driver adds support for hotkeys as well as control of keyboard |
| backlight, battery maximum charge level and various other ACPI |
| features. |
| |
| If you have an LG Gram laptop, say Y or M here. |
| |
| config PANASONIC_LAPTOP |
| tristate "Panasonic Laptop Extras" |
| depends on INPUT && ACPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select INPUT_SPARSEKMAP |
| help |
| This driver adds support for access to backlight control and hotkeys |
| on Panasonic Let's Note laptops. |
| |
| If you have a Panasonic Let's note laptop (such as the R1(N variant), |
| R2, R3, R5, T2, W2 and Y2 series), say Y. |
| |
| config SONY_LAPTOP |
| tristate "Sony Laptop Extras" |
| depends on ACPI |
| depends on ACPI_VIDEO || ACPI_VIDEO = n |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on INPUT |
| depends on RFKILL |
| help |
| This mini-driver drives the SNC and SPIC devices present in the ACPI |
| BIOS of the Sony Vaio laptops. |
| |
| It gives access to some extra laptop functionalities like Bluetooth, |
| screen brightness control, Fn keys and allows powering on/off some |
| devices. |
| |
| Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information. |
| |
| config SONYPI_COMPAT |
| bool "Sonypi compatibility" |
| depends on SONY_LAPTOP |
| help |
| Build the sonypi driver compatibility code into the sony-laptop driver. |
| |
| config SYSTEM76_ACPI |
| tristate "System76 ACPI Driver" |
| depends on ACPI |
| select NEW_LEDS |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| help |
| This is a driver for System76 laptops running open firmware. It adds |
| support for Fn-Fx key combinations, keyboard backlight, and airplane mode |
| LEDs. |
| |
| If you have a System76 laptop running open firmware, say Y or M here. |
| |
| config TOPSTAR_LAPTOP |
| tristate "Topstar Laptop Extras" |
| depends on ACPI |
| depends on INPUT |
| select INPUT_SPARSEKMAP |
| select LEDS_CLASS |
| select NEW_LEDS |
| help |
| This driver adds support for hotkeys found on Topstar laptops. |
| |
| If you have a Topstar laptop, say Y or M here. |
| |
| config I2C_MULTI_INSTANTIATE |
| tristate "I2C multi instantiate pseudo device driver" |
| depends on I2C && ACPI |
| help |
| Some ACPI-based systems list multiple i2c-devices in a single ACPI |
| firmware-node. This driver will instantiate separate i2c-clients |
| for each device in the firmware-node. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called i2c-multi-instantiate. |
| |
| config MLX_PLATFORM |
| tristate "Mellanox Technologies platform support" |
| depends on I2C && REGMAP |
| help |
| This option enables system support for the Mellanox Technologies |
| platform. The Mellanox systems provide data center networking |
| solutions based on Virtual Protocol Interconnect (VPI) technology |
| enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE |
| connection. |
| |
| If you have a Mellanox system, say Y or M here. |
| |
| config TOUCHSCREEN_DMI |
| bool "DMI based touchscreen configuration info" |
| depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD |
| select EFI_EMBEDDED_FIRMWARE if EFI |
| help |
| Certain ACPI based tablets with e.g. Silead or Chipone touchscreens |
| do not have enough data in ACPI tables for the touchscreen driver to |
| handle the touchscreen properly, as OEMs expect the data to be baked |
| into the tablet model specific version of the driver shipped with the |
| the OS-image for the device. This option supplies the missing info. |
| Enable this for x86 tablets with Silead or Chipone touchscreens. |
| |
| config INTEL_IMR |
| bool "Intel Isolated Memory Region support" |
| depends on X86_INTEL_QUARK && IOSF_MBI |
| help |
| This option provides a means to manipulate Isolated Memory Regions. |
| IMRs are a set of registers that define read and write access masks |
| to prohibit certain system agents from accessing memory with 1 KiB |
| granularity. |
| |
| IMRs make it possible to control read/write access to an address |
| by hardware agents inside the SoC. Read and write masks can be |
| defined for: |
| - eSRAM flush |
| - Dirty CPU snoop (write only) |
| - RMU access |
| - PCI Virtual Channel 0/Virtual Channel 1 |
| - SMM mode |
| - Non SMM mode |
| |
| Quark contains a set of eight IMR registers and makes use of those |
| registers during its bootup process. |
| |
| If you are running on a Galileo/Quark say Y here. |
| |
| config INTEL_IPS |
| tristate "Intel Intelligent Power Sharing" |
| depends on ACPI && PCI |
| help |
| Intel Calpella platforms support dynamic power sharing between the |
| CPU and GPU, maximizing performance in a given TDP. This driver, |
| along with the CPU frequency and i915 drivers, provides that |
| functionality. If in doubt, say Y here; it will only load on |
| supported platforms. |
| |
| config INTEL_RST |
| tristate "Intel Rapid Start Technology Driver" |
| depends on ACPI |
| help |
| This driver provides support for modifying parameters on systems |
| equipped with Intel's Rapid Start Technology. When put in an ACPI |
| sleep state, these devices will wake after either a configured |
| timeout or when the system battery reaches a critical state, |
| automatically copying memory contents to disk. On resume, the |
| firmware will copy the memory contents back to RAM and resume the OS |
| as usual. |
| |
| config INTEL_SMARTCONNECT |
| tristate "Intel Smart Connect disabling driver" |
| depends on ACPI |
| help |
| Intel Smart Connect is a technology intended to permit devices to |
| update state by resuming for a short period of time at regular |
| intervals. If a user enables this functionality under Windows and |
| then reboots into Linux, the system may remain configured to resume |
| on suspend. In the absence of any userspace to support it, the system |
| will then remain awake until something triggers another suspend. |
| |
| This driver checks to determine whether the device has Intel Smart |
| Connect enabled, and if so disables it. |
| |
| source "drivers/platform/x86/intel_speed_select_if/Kconfig" |
| |
| config INTEL_TURBO_MAX_3 |
| bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" |
| depends on X86_64 && SCHED_MC_PRIO |
| help |
| This driver reads maximum performance ratio of each CPU and set up |
| the scheduler priority metrics. In this way scheduler can prefer |
| CPU with higher performance to schedule tasks. |
| This driver is only required when the system is not using Hardware |
| P-States (HWP). In HWP mode, priority can be read from ACPI tables. |
| |
| config INTEL_UNCORE_FREQ_CONTROL |
| tristate "Intel Uncore frequency control driver" |
| depends on X86_64 |
| help |
| This driver allows control of uncore frequency limits on |
| supported server platforms. |
| Uncore frequency controls RING/LLC (last-level cache) clocks. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel-uncore-frequency. |
| |
| config INTEL_BXTWC_PMIC_TMU |
| tristate "Intel BXT Whiskey Cove TMU Driver" |
| depends on REGMAP |
| depends on MFD_INTEL_PMC_BXT |
| depends on INTEL_SOC_PMIC_BXTWC |
| help |
| Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature. |
| This driver enables the alarm wakeup functionality in the TMU unit |
| of Whiskey Cove PMIC. |
| |
| config INTEL_CHTDC_TI_PWRBTN |
| tristate "Intel Cherry Trail Dollar Cove TI power button driver" |
| depends on INTEL_SOC_PMIC_CHTDC_TI |
| depends on INPUT |
| help |
| This option adds a power button driver driver for Dollar Cove TI |
| PMIC on Intel Cherry Trail devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_chtdc_ti_pwrbtn. |
| |
| config INTEL_MFLD_THERMAL |
| tristate "Thermal driver for Intel Medfield platform" |
| depends on MFD_INTEL_MSIC && THERMAL |
| help |
| Say Y here to enable thermal driver support for the Intel Medfield |
| platform. |
| |
| config INTEL_MID_POWER_BUTTON |
| tristate "power button driver for Intel MID platforms" |
| depends on INTEL_SCU && INPUT |
| help |
| This driver handles the power button on the Intel MID platforms. |
| |
| If unsure, say N. |
| |
| config INTEL_MRFLD_PWRBTN |
| tristate "Intel Merrifield Basin Cove power button driver" |
| depends on INTEL_SOC_PMIC_MRFLD |
| depends on INPUT |
| help |
| This option adds a power button driver for Basin Cove PMIC |
| on Intel Merrifield devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_mrfld_pwrbtn. |
| |
| config INTEL_PMC_CORE |
| tristate "Intel PMC Core driver" |
| depends on PCI |
| help |
| The Intel Platform Controller Hub for Intel Core SoCs provides access |
| to Power Management Controller registers via a PCI interface. This |
| driver can utilize debugging capabilities and supported features as |
| exposed by the Power Management Controller. |
| |
| Supported features: |
| - SLP_S0_RESIDENCY counter |
| - PCH IP Power Gating status |
| - LTR Ignore |
| - MPHY/PLL gating status (Sunrisepoint PCH only) |
| |
| config INTEL_PUNIT_IPC |
| tristate "Intel P-Unit IPC Driver" |
| help |
| This driver provides support for Intel P-Unit Mailbox IPC mechanism, |
| which is used to bridge the communications between kernel and P-Unit. |
| |
| config INTEL_SCU_IPC |
| bool |
| |
| config INTEL_SCU |
| bool |
| select INTEL_SCU_IPC |
| |
| config INTEL_SCU_PCI |
| bool "Intel SCU PCI driver" |
| depends on PCI |
| select INTEL_SCU |
| help |
| This driver is used to bridge the communications between kernel |
| and SCU on some embedded Intel x86 platforms. It also creates |
| devices that are connected to the SoC through the SCU. |
| Platforms supported: |
| Medfield |
| Clovertrail |
| Merrifield |
| Broxton |
| Apollo Lake |
| |
| config INTEL_SCU_PLATFORM |
| tristate "Intel SCU platform driver" |
| depends on ACPI |
| select INTEL_SCU |
| help |
| This driver is used to bridge the communications between kernel |
| and SCU (sometimes called PMC as well). The driver currently |
| supports Intel Elkhart Lake and compatible platforms. |
| |
| config INTEL_SCU_IPC_UTIL |
| tristate "Intel SCU IPC utility driver" |
| depends on INTEL_SCU |
| help |
| The IPC Util driver provides an interface with the SCU enabling |
| low level access for debug work and updating the firmware. Say |
| N unless you will be doing this on an Intel MID platform. |
| |
| config INTEL_TELEMETRY |
| tristate "Intel SoC Telemetry Driver" |
| depends on X86_64 |
| depends on MFD_INTEL_PMC_BXT |
| depends on INTEL_PUNIT_IPC |
| help |
| This driver provides interfaces to configure and use |
| telemetry for INTEL SoC from APL onwards. It is also |
| used to get various SoC events and parameters |
| directly via debugfs files. Various tools may use |
| this interface for SoC state monitoring. |
| |
| endif # X86_PLATFORM_DEVICES |
| |
| config PMC_ATOM |
| def_bool y |
| depends on PCI |
| select COMMON_CLK |
