| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Linux driver for TerraTec DMX 6Fire USB |
| * |
| * Firmware loader |
| * |
| * Author: Torsten Schenk <torsten.schenk@zoho.com> |
| * Created: Jan 01, 2011 |
| * Copyright: (C) Torsten Schenk |
| */ |
| |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/bitrev.h> |
| #include <linux/kernel.h> |
| |
| #include "firmware.h" |
| #include "chip.h" |
| |
| MODULE_FIRMWARE("6fire/dmx6firel2.ihx"); |
| MODULE_FIRMWARE("6fire/dmx6fireap.ihx"); |
| MODULE_FIRMWARE("6fire/dmx6firecf.bin"); |
| |
| enum { |
| FPGA_BUFSIZE = 512, FPGA_EP = 2 |
| }; |
| |
| /* |
| * wMaxPacketSize of pcm endpoints. |
| * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c |
| * fpp: frames per isopacket |
| * |
| * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init |
| */ |
| static const u8 ep_w_max_packet_size[] = { |
| 0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */ |
| 0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/ |
| 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ |
| }; |
| |
| static const u8 known_fw_versions[][2] = { |
| { 0x03, 0x01 } |
| }; |
| |
| struct ihex_record { |
| u16 address; |
| u8 len; |
| u8 data[256]; |
| char error; /* true if an error occurred parsing this record */ |
| |
| u8 max_len; /* maximum record length in whole ihex */ |
| |
| /* private */ |
| const char *txt_data; |
| unsigned int txt_length; |
| unsigned int txt_offset; /* current position in txt_data */ |
| }; |
| |
| static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc) |
| { |
| u8 val = 0; |
| int hval; |
| |
| hval = hex_to_bin(data[0]); |
| if (hval >= 0) |
| val |= (hval << 4); |
| |
| hval = hex_to_bin(data[1]); |
| if (hval >= 0) |
| val |= hval; |
| |
| *crc += val; |
| return val; |
| } |
| |
| /* |
| * returns true if record is available, false otherwise. |
| * iff an error occurred, false will be returned and record->error will be true. |
| */ |
| static bool usb6fire_fw_ihex_next_record(struct ihex_record *record) |
| { |
| u8 crc = 0; |
| u8 type; |
| int i; |
| |
| record->error = false; |
| |
| /* find begin of record (marked by a colon) */ |
| while (record->txt_offset < record->txt_length |
| && record->txt_data[record->txt_offset] != ':') |
| record->txt_offset++; |
| if (record->txt_offset == record->txt_length) |
| return false; |
| |
| /* number of characters needed for len, addr and type entries */ |
| record->txt_offset++; |
| if (record->txt_offset + 8 > record->txt_length) { |
| record->error = true; |
| return false; |
| } |
| |
| record->len = usb6fire_fw_ihex_hex(record->txt_data + |
| record->txt_offset, &crc); |
| record->txt_offset += 2; |
| record->address = usb6fire_fw_ihex_hex(record->txt_data + |
| record->txt_offset, &crc) << 8; |
| record->txt_offset += 2; |
| record->address |= usb6fire_fw_ihex_hex(record->txt_data + |
| record->txt_offset, &crc); |
| record->txt_offset += 2; |
| type = usb6fire_fw_ihex_hex(record->txt_data + |
| record->txt_offset, &crc); |
| record->txt_offset += 2; |
| |
| /* number of characters needed for data and crc entries */ |
| if (record->txt_offset + 2 * (record->len + 1) > record->txt_length) { |
| record->error = true; |
| return false; |
| } |
| for (i = 0; i < record->len; i++) { |
| record->data[i] = usb6fire_fw_ihex_hex(record->txt_data |
| + record->txt_offset, &crc); |
| record->txt_offset += 2; |
| } |
| usb6fire_fw_ihex_hex(record->txt_data + record->txt_offset, &crc); |
| if (crc) { |
| record->error = true; |
| return false; |
| } |
| |
| if (type == 1 || !record->len) /* eof */ |
| return false; |
| else if (type == 0) |
| return true; |
| else { |
| record->error = true; |
| return false; |
| } |
| } |
| |
| static int usb6fire_fw_ihex_init(const struct firmware *fw, |
| struct ihex_record *record) |
| { |
| record->txt_data = fw->data; |
| record->txt_length = fw->size; |
| record->txt_offset = 0; |
| record->max_len = 0; |
| /* read all records, if loop ends, record->error indicates, |
| * whether ihex is valid. */ |
| while (usb6fire_fw_ihex_next_record(record)) |
| record->max_len = max(record->len, record->max_len); |
| if (record->error) |
| return -EINVAL; |
| record->txt_offset = 0; |
| return 0; |
| } |
| |
| static int usb6fire_fw_ezusb_write(struct usb_device *device, |
| int type, int value, char *data, int len) |
| { |
| int ret; |
| |
| ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, 0, data, len, HZ); |
| if (ret < 0) |
| return ret; |
| else if (ret != len) |
| return -EIO; |
| return 0; |
| } |
| |
| static int usb6fire_fw_ezusb_read(struct usb_device *device, |
| int type, int value, char *data, int len) |
| { |
| int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, |
| 0, data, len, HZ); |
| if (ret < 0) |
| return ret; |
| else if (ret != len) |
| return -EIO; |
| return 0; |
| } |
| |
| static int usb6fire_fw_fpga_write(struct usb_device *device, |
| char *data, int len) |
| { |
| int actual_len; |
| int ret; |
| |
| ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len, |
| &actual_len, HZ); |
| if (ret < 0) |
| return ret; |
| else if (actual_len != len) |
| return -EIO; |
| return 0; |
| } |
| |
| static int usb6fire_fw_ezusb_upload( |
| struct usb_interface *intf, const char *fwname, |
| unsigned int postaddr, u8 *postdata, unsigned int postlen) |
| { |
| int ret; |
| u8 data; |
| struct usb_device *device = interface_to_usbdev(intf); |
| const struct firmware *fw = NULL; |
| struct ihex_record *rec = kmalloc(sizeof(struct ihex_record), |
| GFP_KERNEL); |
| |
| if (!rec) |
| return -ENOMEM; |
| |
| ret = request_firmware(&fw, fwname, &device->dev); |
| if (ret < 0) { |
| kfree(rec); |
| dev_err(&intf->dev, |
| "error requesting ezusb firmware %s.\n", fwname); |
| return ret; |
| } |
| ret = usb6fire_fw_ihex_init(fw, rec); |
| if (ret < 0) { |
| kfree(rec); |
| release_firmware(fw); |
| dev_err(&intf->dev, |
| "error validating ezusb firmware %s.\n", fwname); |
| return ret; |
| } |
| /* upload firmware image */ |
| data = 0x01; /* stop ezusb cpu */ |
| ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); |
| if (ret < 0) { |
| kfree(rec); |
| release_firmware(fw); |
| dev_err(&intf->dev, |
| "unable to upload ezusb firmware %s: begin message.\n", |
| fwname); |
| return ret; |
| } |
| |
| while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */ |
| ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address, |
| rec->data, rec->len); |
| if (ret < 0) { |
| kfree(rec); |
| release_firmware(fw); |
| dev_err(&intf->dev, |
| "unable to upload ezusb firmware %s: data urb.\n", |
| fwname); |
| return ret; |
| } |
| } |
| |
| release_firmware(fw); |
| kfree(rec); |
| if (postdata) { /* write data after firmware has been uploaded */ |
| ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr, |
| postdata, postlen); |
| if (ret < 0) { |
| dev_err(&intf->dev, |
| "unable to upload ezusb firmware %s: post urb.\n", |
| fwname); |
| return ret; |
| } |
| } |
| |
| data = 0x00; /* resume ezusb cpu */ |
| ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); |
| if (ret < 0) { |
| dev_err(&intf->dev, |
| "unable to upload ezusb firmware %s: end message.\n", |
| fwname); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int usb6fire_fw_fpga_upload( |
| struct usb_interface *intf, const char *fwname) |
| { |
| int ret; |
| int i; |
| struct usb_device *device = interface_to_usbdev(intf); |
| u8 *buffer = kmalloc(FPGA_BUFSIZE, GFP_KERNEL); |
| const char *c; |
| const char *end; |
| const struct firmware *fw; |
| |
| if (!buffer) |
| return -ENOMEM; |
| |
| ret = request_firmware(&fw, fwname, &device->dev); |
| if (ret < 0) { |
| dev_err(&intf->dev, "unable to get fpga firmware %s.\n", |
| fwname); |
| kfree(buffer); |
| return -EIO; |
| } |
| |
| c = fw->data; |
| end = fw->data + fw->size; |
| |
| ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0); |
| if (ret < 0) { |
| kfree(buffer); |
| release_firmware(fw); |
| dev_err(&intf->dev, |
| "unable to upload fpga firmware: begin urb.\n"); |
| return ret; |
| } |
| |
| while (c != end) { |
| for (i = 0; c != end && i < FPGA_BUFSIZE; i++, c++) |
| buffer[i] = bitrev8((u8)*c); |
| |
| ret = usb6fire_fw_fpga_write(device, buffer, i); |
| if (ret < 0) { |
| release_firmware(fw); |
| kfree(buffer); |
| dev_err(&intf->dev, |
| "unable to upload fpga firmware: fw urb.\n"); |
| return ret; |
| } |
| } |
| release_firmware(fw); |
| kfree(buffer); |
| |
| ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0); |
| if (ret < 0) { |
| dev_err(&intf->dev, |
| "unable to upload fpga firmware: end urb.\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* check, if the firmware version the devices has currently loaded |
| * is known by this driver. 'version' needs to have 4 bytes version |
| * info data. */ |
| static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++) |
| if (!memcmp(version, known_fw_versions + i, 2)) |
| return 0; |
| |
| dev_err(&intf->dev, "invalid firmware version in device: %4ph. " |
| "please reconnect to power. if this failure " |
| "still happens, check your firmware installation.", |
| version); |
| return -EINVAL; |
| } |
| |
| int usb6fire_fw_init(struct usb_interface *intf) |
| { |
| int i; |
| int ret; |
| struct usb_device *device = interface_to_usbdev(intf); |
| /* buffer: 8 receiving bytes from device and |
| * sizeof(EP_W_MAX_PACKET_SIZE) bytes for non-const copy */ |
| u8 buffer[12]; |
| |
| ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8); |
| if (ret < 0) { |
| dev_err(&intf->dev, |
| "unable to receive device firmware state.\n"); |
| return ret; |
| } |
| if (buffer[0] != 0xeb || buffer[1] != 0xaa || buffer[2] != 0x55) { |
| dev_err(&intf->dev, |
| "unknown device firmware state received from device:"); |
| for (i = 0; i < 8; i++) |
| printk(KERN_CONT "%02x ", buffer[i]); |
| printk(KERN_CONT "\n"); |
| return -EIO; |
| } |
| /* do we need fpga loader ezusb firmware? */ |
| if (buffer[3] == 0x01) { |
| ret = usb6fire_fw_ezusb_upload(intf, |
| "6fire/dmx6firel2.ihx", 0, NULL, 0); |
| if (ret < 0) |
| return ret; |
| return FW_NOT_READY; |
| } |
| /* do we need fpga firmware and application ezusb firmware? */ |
| else if (buffer[3] == 0x02) { |
| ret = usb6fire_fw_check(intf, buffer + 4); |
| if (ret < 0) |
| return ret; |
| ret = usb6fire_fw_fpga_upload(intf, "6fire/dmx6firecf.bin"); |
| if (ret < 0) |
| return ret; |
| memcpy(buffer, ep_w_max_packet_size, |
| sizeof(ep_w_max_packet_size)); |
| ret = usb6fire_fw_ezusb_upload(intf, "6fire/dmx6fireap.ihx", |
| 0x0003, buffer, sizeof(ep_w_max_packet_size)); |
| if (ret < 0) |
| return ret; |
| return FW_NOT_READY; |
| } |
| /* all fw loaded? */ |
| else if (buffer[3] == 0x03) |
| return usb6fire_fw_check(intf, buffer + 4); |
| /* unknown data? */ |
| else { |
| dev_err(&intf->dev, |
| "unknown device firmware state received from device: "); |
| for (i = 0; i < 8; i++) |
| printk(KERN_CONT "%02x ", buffer[i]); |
| printk(KERN_CONT "\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |