| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * wm8523.c  --  WM8523 ALSA SoC Audio driver | 
 |  * | 
 |  * Copyright 2009 Wolfson Microelectronics plc | 
 |  * | 
 |  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | 
 |  */ | 
 |  | 
 | #include <linux/mod_devicetable.h> | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <sound/core.h> | 
 | #include <sound/pcm.h> | 
 | #include <sound/pcm_params.h> | 
 | #include <sound/soc.h> | 
 | #include <sound/initval.h> | 
 | #include <sound/tlv.h> | 
 |  | 
 | #include "wm8523.h" | 
 |  | 
 | #define WM8523_NUM_SUPPLIES 2 | 
 | static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = { | 
 | 	"AVDD", | 
 | 	"LINEVDD", | 
 | }; | 
 |  | 
 | #define WM8523_NUM_RATES 7 | 
 |  | 
 | /* codec private data */ | 
 | struct wm8523_priv { | 
 | 	struct regmap *regmap; | 
 | 	struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES]; | 
 | 	unsigned int sysclk; | 
 | 	unsigned int rate_constraint_list[WM8523_NUM_RATES]; | 
 | 	struct snd_pcm_hw_constraint_list rate_constraint; | 
 | }; | 
 |  | 
 | static const struct reg_default wm8523_reg_defaults[] = { | 
 | 	{ 2, 0x0000 },     /* R2 - PSCTRL1 */ | 
 | 	{ 3, 0x1812 },     /* R3 - AIF_CTRL1 */ | 
 | 	{ 4, 0x0000 },     /* R4 - AIF_CTRL2 */ | 
 | 	{ 5, 0x0001 },     /* R5 - DAC_CTRL3 */ | 
 | 	{ 6, 0x0190 },     /* R6 - DAC_GAINL */ | 
 | 	{ 7, 0x0190 },     /* R7 - DAC_GAINR */ | 
 | 	{ 8, 0x0000 },     /* R8 - ZERO_DETECT */ | 
 | }; | 
 |  | 
 | static bool wm8523_volatile_register(struct device *dev, unsigned int reg) | 
 | { | 
 | 	switch (reg) { | 
 | 	case WM8523_DEVICE_ID: | 
 | 	case WM8523_REVISION: | 
 | 		return true; | 
 | 	default: | 
 | 		return false; | 
 | 	} | 
 | } | 
 |  | 
 | static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0); | 
 |  | 
 | static const char *wm8523_zd_count_text[] = { | 
 | 	"1024", | 
 | 	"2048", | 
 | }; | 
 |  | 
 | static SOC_ENUM_SINGLE_DECL(wm8523_zc_count, WM8523_ZERO_DETECT, 0, | 
 | 			    wm8523_zd_count_text); | 
 |  | 
 | static const struct snd_kcontrol_new wm8523_controls[] = { | 
 | SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR, | 
 | 		 0, 448, 0, dac_tlv), | 
 | SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0), | 
 | SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0), | 
 | SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1), | 
 | SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0), | 
 | SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0), | 
 | SOC_ENUM("Zero Detect Count", wm8523_zc_count), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = { | 
 | SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), | 
 | SND_SOC_DAPM_OUTPUT("LINEVOUTL"), | 
 | SND_SOC_DAPM_OUTPUT("LINEVOUTR"), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_route wm8523_dapm_routes[] = { | 
 | 	{ "LINEVOUTL", NULL, "DAC" }, | 
 | 	{ "LINEVOUTR", NULL, "DAC" }, | 
 | }; | 
 |  | 
 | static const struct { | 
 | 	int value; | 
 | 	int ratio; | 
 | } lrclk_ratios[WM8523_NUM_RATES] = { | 
 | 	{ 1, 128 }, | 
 | 	{ 2, 192 }, | 
 | 	{ 3, 256 }, | 
 | 	{ 4, 384 }, | 
 | 	{ 5, 512 }, | 
 | 	{ 6, 768 }, | 
 | 	{ 7, 1152 }, | 
 | }; | 
 |  | 
 | static const struct { | 
 | 	int value; | 
 | 	int ratio; | 
 | } bclk_ratios[] = { | 
 | 	{ 2, 32 }, | 
 | 	{ 3, 64 }, | 
 | 	{ 4, 128 }, | 
 | }; | 
 |  | 
 | static int wm8523_startup(struct snd_pcm_substream *substream, | 
 | 			  struct snd_soc_dai *dai) | 
 | { | 
 | 	struct snd_soc_component *component = dai->component; | 
 | 	struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component); | 
 |  | 
 | 	/* The set of sample rates that can be supported depends on the | 
 | 	 * MCLK supplied to the CODEC - enforce this. | 
 | 	 */ | 
 | 	if (!wm8523->sysclk) { | 
 | 		dev_err(component->dev, | 
 | 			"No MCLK configured, call set_sysclk() on init\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	snd_pcm_hw_constraint_list(substream->runtime, 0, | 
 | 				   SNDRV_PCM_HW_PARAM_RATE, | 
 | 				   &wm8523->rate_constraint); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm8523_hw_params(struct snd_pcm_substream *substream, | 
 | 			    struct snd_pcm_hw_params *params, | 
 | 			    struct snd_soc_dai *dai) | 
 | { | 
 | 	struct snd_soc_component *component = dai->component; | 
 | 	struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component); | 
 | 	int i; | 
 | 	u16 aifctrl1 = snd_soc_component_read(component, WM8523_AIF_CTRL1); | 
 | 	u16 aifctrl2 = snd_soc_component_read(component, WM8523_AIF_CTRL2); | 
 |  | 
 | 	/* Find a supported LRCLK ratio */ | 
 | 	for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { | 
 | 		if (wm8523->sysclk / params_rate(params) == | 
 | 		    lrclk_ratios[i].ratio) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	/* Should never happen, should be handled by constraints */ | 
 | 	if (i == ARRAY_SIZE(lrclk_ratios)) { | 
 | 		dev_err(component->dev, "MCLK/fs ratio %d unsupported\n", | 
 | 			wm8523->sysclk / params_rate(params)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	aifctrl2 &= ~WM8523_SR_MASK; | 
 | 	aifctrl2 |= lrclk_ratios[i].value; | 
 |  | 
 | 	if (aifctrl1 & WM8523_AIF_MSTR) { | 
 | 		/* Find a fs->bclk ratio */ | 
 | 		for (i = 0; i < ARRAY_SIZE(bclk_ratios); i++) | 
 | 			if (params_width(params) * 2 <= bclk_ratios[i].ratio) | 
 | 				break; | 
 |  | 
 | 		if (i == ARRAY_SIZE(bclk_ratios)) { | 
 | 			dev_err(component->dev, | 
 | 				"No matching BCLK/fs ratio for word length %d\n", | 
 | 				params_width(params)); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		aifctrl2 &= ~WM8523_BCLKDIV_MASK; | 
 | 		aifctrl2 |= bclk_ratios[i].value << WM8523_BCLKDIV_SHIFT; | 
 | 	} | 
 |  | 
 | 	aifctrl1 &= ~WM8523_WL_MASK; | 
 | 	switch (params_width(params)) { | 
 | 	case 16: | 
 | 		break; | 
 | 	case 20: | 
 | 		aifctrl1 |= 0x8; | 
 | 		break; | 
 | 	case 24: | 
 | 		aifctrl1 |= 0x10; | 
 | 		break; | 
 | 	case 32: | 
 | 		aifctrl1 |= 0x18; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	snd_soc_component_write(component, WM8523_AIF_CTRL1, aifctrl1); | 
 | 	snd_soc_component_write(component, WM8523_AIF_CTRL2, aifctrl2); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai, | 
 | 		int clk_id, unsigned int freq, int dir) | 
 | { | 
 | 	struct snd_soc_component *component = codec_dai->component; | 
 | 	struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component); | 
 | 	unsigned int val; | 
 | 	int i; | 
 |  | 
 | 	wm8523->sysclk = freq; | 
 |  | 
 | 	wm8523->rate_constraint.count = 0; | 
 | 	for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) { | 
 | 		val = freq / lrclk_ratios[i].ratio; | 
 | 		/* Check that it's a standard rate since core can't | 
 | 		 * cope with others and having the odd rates confuses | 
 | 		 * constraint matching. | 
 | 		 */ | 
 | 		switch (val) { | 
 | 		case 8000: | 
 | 		case 11025: | 
 | 		case 16000: | 
 | 		case 22050: | 
 | 		case 32000: | 
 | 		case 44100: | 
 | 		case 48000: | 
 | 		case 64000: | 
 | 		case 88200: | 
 | 		case 96000: | 
 | 		case 176400: | 
 | 		case 192000: | 
 | 			dev_dbg(component->dev, "Supported sample rate: %dHz\n", | 
 | 				val); | 
 | 			wm8523->rate_constraint_list[i] = val; | 
 | 			wm8523->rate_constraint.count++; | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(component->dev, "Skipping sample rate: %dHz\n", | 
 | 				val); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Need at least one supported rate... */ | 
 | 	if (wm8523->rate_constraint.count == 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai, | 
 | 		unsigned int fmt) | 
 | { | 
 | 	struct snd_soc_component *component = codec_dai->component; | 
 | 	u16 aifctrl1 = snd_soc_component_read(component, WM8523_AIF_CTRL1); | 
 |  | 
 | 	aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK | | 
 | 		      WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK); | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
 | 	case SND_SOC_DAIFMT_CBM_CFM: | 
 | 		aifctrl1 |= WM8523_AIF_MSTR; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_CBS_CFS: | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
 | 	case SND_SOC_DAIFMT_I2S: | 
 | 		aifctrl1 |= 0x0002; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_RIGHT_J: | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_LEFT_J: | 
 | 		aifctrl1 |= 0x0001; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_DSP_A: | 
 | 		aifctrl1 |= 0x0003; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_DSP_B: | 
 | 		aifctrl1 |= 0x0023; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
 | 	case SND_SOC_DAIFMT_NB_NF: | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_IB_IF: | 
 | 		aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_IB_NF: | 
 | 		aifctrl1 |= WM8523_BCLK_INV; | 
 | 		break; | 
 | 	case SND_SOC_DAIFMT_NB_IF: | 
 | 		aifctrl1 |= WM8523_LRCLK_INV; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	snd_soc_component_write(component, WM8523_AIF_CTRL1, aifctrl1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm8523_set_bias_level(struct snd_soc_component *component, | 
 | 				 enum snd_soc_bias_level level) | 
 | { | 
 | 	struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component); | 
 | 	int ret; | 
 |  | 
 | 	switch (level) { | 
 | 	case SND_SOC_BIAS_ON: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_PREPARE: | 
 | 		/* Full power on */ | 
 | 		snd_soc_component_update_bits(component, WM8523_PSCTRL1, | 
 | 				    WM8523_SYS_ENA_MASK, 3); | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_STANDBY: | 
 | 		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { | 
 | 			ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), | 
 | 						    wm8523->supplies); | 
 | 			if (ret != 0) { | 
 | 				dev_err(component->dev, | 
 | 					"Failed to enable supplies: %d\n", | 
 | 					ret); | 
 | 				return ret; | 
 | 			} | 
 |  | 
 | 			/* Sync back default/cached values */ | 
 | 			regcache_sync(wm8523->regmap); | 
 |  | 
 | 			/* Initial power up */ | 
 | 			snd_soc_component_update_bits(component, WM8523_PSCTRL1, | 
 | 					    WM8523_SYS_ENA_MASK, 1); | 
 |  | 
 | 			msleep(100); | 
 | 		} | 
 |  | 
 | 		/* Power up to mute */ | 
 | 		snd_soc_component_update_bits(component, WM8523_PSCTRL1, | 
 | 				    WM8523_SYS_ENA_MASK, 2); | 
 |  | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_OFF: | 
 | 		/* The chip runs through the power down sequence for us. */ | 
 | 		snd_soc_component_update_bits(component, WM8523_PSCTRL1, | 
 | 				    WM8523_SYS_ENA_MASK, 0); | 
 | 		msleep(100); | 
 |  | 
 | 		regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), | 
 | 				       wm8523->supplies); | 
 | 		break; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define WM8523_RATES SNDRV_PCM_RATE_8000_192000 | 
 |  | 
 | #define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ | 
 | 			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) | 
 |  | 
 | static const struct snd_soc_dai_ops wm8523_dai_ops = { | 
 | 	.startup	= wm8523_startup, | 
 | 	.hw_params	= wm8523_hw_params, | 
 | 	.set_sysclk	= wm8523_set_dai_sysclk, | 
 | 	.set_fmt	= wm8523_set_dai_fmt, | 
 | }; | 
 |  | 
 | static struct snd_soc_dai_driver wm8523_dai = { | 
 | 	.name = "wm8523-hifi", | 
 | 	.playback = { | 
 | 		.stream_name = "Playback", | 
 | 		.channels_min = 2,  /* Mono modes not yet supported */ | 
 | 		.channels_max = 2, | 
 | 		.rates = WM8523_RATES, | 
 | 		.formats = WM8523_FORMATS, | 
 | 	}, | 
 | 	.ops = &wm8523_dai_ops, | 
 | }; | 
 |  | 
 | static int wm8523_probe(struct snd_soc_component *component) | 
 | { | 
 | 	struct wm8523_priv *wm8523 = snd_soc_component_get_drvdata(component); | 
 |  | 
 | 	wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0]; | 
 | 	wm8523->rate_constraint.count = | 
 | 		ARRAY_SIZE(wm8523->rate_constraint_list); | 
 |  | 
 | 	/* Change some default settings - latch VU and enable ZC */ | 
 | 	snd_soc_component_update_bits(component, WM8523_DAC_GAINR, | 
 | 			    WM8523_DACR_VU, WM8523_DACR_VU); | 
 | 	snd_soc_component_update_bits(component, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_component_driver soc_component_dev_wm8523 = { | 
 | 	.probe			= wm8523_probe, | 
 | 	.set_bias_level		= wm8523_set_bias_level, | 
 | 	.controls		= wm8523_controls, | 
 | 	.num_controls		= ARRAY_SIZE(wm8523_controls), | 
 | 	.dapm_widgets		= wm8523_dapm_widgets, | 
 | 	.num_dapm_widgets	= ARRAY_SIZE(wm8523_dapm_widgets), | 
 | 	.dapm_routes		= wm8523_dapm_routes, | 
 | 	.num_dapm_routes	= ARRAY_SIZE(wm8523_dapm_routes), | 
 | 	.suspend_bias_off	= 1, | 
 | 	.idle_bias_on		= 1, | 
 | 	.use_pmdown_time	= 1, | 
 | 	.endianness		= 1, | 
 | }; | 
 |  | 
 | static const struct of_device_id wm8523_of_match[] = { | 
 | 	{ .compatible = "wlf,wm8523" }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, wm8523_of_match); | 
 |  | 
 | static const struct regmap_config wm8523_regmap = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 16, | 
 | 	.max_register = WM8523_ZERO_DETECT, | 
 |  | 
 | 	.reg_defaults = wm8523_reg_defaults, | 
 | 	.num_reg_defaults = ARRAY_SIZE(wm8523_reg_defaults), | 
 | 	.cache_type = REGCACHE_MAPLE, | 
 |  | 
 | 	.volatile_reg = wm8523_volatile_register, | 
 | }; | 
 |  | 
 | static int wm8523_i2c_probe(struct i2c_client *i2c) | 
 | { | 
 | 	struct wm8523_priv *wm8523; | 
 | 	unsigned int val; | 
 | 	int ret, i; | 
 |  | 
 | 	wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv), | 
 | 			      GFP_KERNEL); | 
 | 	if (wm8523 == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	wm8523->regmap = devm_regmap_init_i2c(i2c, &wm8523_regmap); | 
 | 	if (IS_ERR(wm8523->regmap)) { | 
 | 		ret = PTR_ERR(wm8523->regmap); | 
 | 		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++) | 
 | 		wm8523->supplies[i].supply = wm8523_supply_names[i]; | 
 |  | 
 | 	ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8523->supplies), | 
 | 				      wm8523->supplies); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies), | 
 | 				    wm8523->supplies); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(wm8523->regmap, WM8523_DEVICE_ID, &val); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&i2c->dev, "Failed to read ID register\n"); | 
 | 		goto err_enable; | 
 | 	} | 
 | 	if (val != 0x8523) { | 
 | 		dev_err(&i2c->dev, "Device is not a WM8523, ID is %x\n", ret); | 
 | 		ret = -EINVAL; | 
 | 		goto err_enable; | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(wm8523->regmap, WM8523_REVISION, &val); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&i2c->dev, "Failed to read revision register\n"); | 
 | 		goto err_enable; | 
 | 	} | 
 | 	dev_info(&i2c->dev, "revision %c\n", | 
 | 		 (val & WM8523_CHIP_REV_MASK) + 'A'); | 
 |  | 
 | 	ret = regmap_write(wm8523->regmap, WM8523_DEVICE_ID, 0x8523); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to reset device: %d\n", ret); | 
 | 		goto err_enable; | 
 | 	} | 
 |  | 
 | 	regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); | 
 |  | 
 | 	i2c_set_clientdata(i2c, wm8523); | 
 |  | 
 | 	ret = devm_snd_soc_register_component(&i2c->dev, | 
 | 			&soc_component_dev_wm8523, &wm8523_dai, 1); | 
 |  | 
 | 	return ret; | 
 |  | 
 | err_enable: | 
 | 	regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct i2c_device_id wm8523_i2c_id[] = { | 
 | 	{ "wm8523" }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id); | 
 |  | 
 | static struct i2c_driver wm8523_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "wm8523", | 
 | 		.of_match_table = wm8523_of_match, | 
 | 	}, | 
 | 	.probe = wm8523_i2c_probe, | 
 | 	.id_table = wm8523_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(wm8523_i2c_driver); | 
 |  | 
 | MODULE_DESCRIPTION("ASoC WM8523 driver"); | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_LICENSE("GPL"); |