| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Author: Xiang Gao <gaoxiang@loongson.cn> | |
| * Huacai Chen <chenhuacai@loongson.cn> | |
| * | |
| * Copyright (C) 2020-2022 Loongson Technology Corporation Limited | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/mmzone.h> | |
| #include <linux/export.h> | |
| #include <linux/nodemask.h> | |
| #include <linux/swap.h> | |
| #include <linux/memblock.h> | |
| #include <linux/pfn.h> | |
| #include <linux/acpi.h> | |
| #include <linux/efi.h> | |
| #include <linux/irq.h> | |
| #include <linux/pci.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/loongson.h> | |
| #include <asm/numa.h> | |
| #include <asm/page.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/sections.h> | |
| #include <asm/time.h> | |
| int numa_off; | |
| unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES]; | |
| EXPORT_SYMBOL(node_distances); | |
| static struct numa_meminfo numa_meminfo; | |
| cpumask_t cpus_on_node[MAX_NUMNODES]; | |
| cpumask_t phys_cpus_on_node[MAX_NUMNODES]; | |
| EXPORT_SYMBOL(cpus_on_node); | |
| /* | |
| * apicid, cpu, node mappings | |
| */ | |
| s16 __cpuid_to_node[CONFIG_NR_CPUS] = { | |
| [0 ... CONFIG_NR_CPUS - 1] = NUMA_NO_NODE | |
| }; | |
| EXPORT_SYMBOL(__cpuid_to_node); | |
| nodemask_t numa_nodes_parsed __initdata; | |
| #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA | |
| unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; | |
| EXPORT_SYMBOL(__per_cpu_offset); | |
| static int __init pcpu_cpu_to_node(int cpu) | |
| { | |
| return early_cpu_to_node(cpu); | |
| } | |
| static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) | |
| { | |
| if (early_cpu_to_node(from) == early_cpu_to_node(to)) | |
| return LOCAL_DISTANCE; | |
| else | |
| return REMOTE_DISTANCE; | |
| } | |
| void __init pcpu_populate_pte(unsigned long addr) | |
| { | |
| populate_kernel_pte(addr); | |
| } | |
| void __init setup_per_cpu_areas(void) | |
| { | |
| unsigned long delta; | |
| unsigned int cpu; | |
| int rc = -EINVAL; | |
| if (pcpu_chosen_fc == PCPU_FC_AUTO) { | |
| if (nr_node_ids >= 8) | |
| pcpu_chosen_fc = PCPU_FC_PAGE; | |
| else | |
| pcpu_chosen_fc = PCPU_FC_EMBED; | |
| } | |
| /* | |
| * Always reserve area for module percpu variables. That's | |
| * what the legacy allocator did. | |
| */ | |
| if (pcpu_chosen_fc != PCPU_FC_PAGE) { | |
| rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, | |
| PERCPU_DYNAMIC_RESERVE, PMD_SIZE, | |
| pcpu_cpu_distance, pcpu_cpu_to_node); | |
| if (rc < 0) | |
| pr_warn("%s allocator failed (%d), falling back to page size\n", | |
| pcpu_fc_names[pcpu_chosen_fc], rc); | |
| } | |
| if (rc < 0) | |
| rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_cpu_to_node); | |
| if (rc < 0) | |
| panic("cannot initialize percpu area (err=%d)", rc); | |
| delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; | |
| for_each_possible_cpu(cpu) | |
| __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; | |
| } | |
| #endif | |
| /* | |
| * Get nodeid by logical cpu number. | |
| * __cpuid_to_node maps phyical cpu id to node, so we | |
| * should use cpu_logical_map(cpu) to index it. | |
| * | |
| * This routine is only used in early phase during | |
| * booting, after setup_per_cpu_areas calling and numa_node | |
| * initialization, cpu_to_node will be used instead. | |
| */ | |
| int early_cpu_to_node(int cpu) | |
| { | |
| int physid = cpu_logical_map(cpu); | |
| if (physid < 0) | |
| return NUMA_NO_NODE; | |
| return __cpuid_to_node[physid]; | |
| } | |
| void __init early_numa_add_cpu(int cpuid, s16 node) | |
| { | |
| int cpu = __cpu_number_map[cpuid]; | |
| if (cpu < 0) | |
| return; | |
| cpumask_set_cpu(cpu, &cpus_on_node[node]); | |
| cpumask_set_cpu(cpuid, &phys_cpus_on_node[node]); | |
| } | |
| void numa_add_cpu(unsigned int cpu) | |
| { | |
| int nid = cpu_to_node(cpu); | |
| cpumask_set_cpu(cpu, &cpus_on_node[nid]); | |
| } | |
| void numa_remove_cpu(unsigned int cpu) | |
| { | |
| int nid = cpu_to_node(cpu); | |
| cpumask_clear_cpu(cpu, &cpus_on_node[nid]); | |
| } | |
| static int __init numa_add_memblk_to(int nid, u64 start, u64 end, | |
| struct numa_meminfo *mi) | |
| { | |
| /* ignore zero length blks */ | |
| if (start == end) | |
| return 0; | |
| /* whine about and ignore invalid blks */ | |
| if (start > end || nid < 0 || nid >= MAX_NUMNODES) { | |
| pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", | |
| nid, start, end - 1); | |
| return 0; | |
| } | |
| if (mi->nr_blks >= NR_NODE_MEMBLKS) { | |
| pr_err("NUMA: too many memblk ranges\n"); | |
| return -EINVAL; | |
| } | |
| mi->blk[mi->nr_blks].start = PFN_ALIGN(start); | |
| mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1); | |
| mi->blk[mi->nr_blks].nid = nid; | |
| mi->nr_blks++; | |
| return 0; | |
| } | |
| /** | |
| * numa_add_memblk - Add one numa_memblk to numa_meminfo | |
| * @nid: NUMA node ID of the new memblk | |
| * @start: Start address of the new memblk | |
| * @end: End address of the new memblk | |
| * | |
| * Add a new memblk to the default numa_meminfo. | |
| * | |
| * RETURNS: | |
| * 0 on success, -errno on failure. | |
| */ | |
| int __init numa_add_memblk(int nid, u64 start, u64 end) | |
| { | |
| return numa_add_memblk_to(nid, start, end, &numa_meminfo); | |
| } | |
| static void __init node_mem_init(unsigned int node) | |
| { | |
| unsigned long start_pfn, end_pfn; | |
| unsigned long node_addrspace_offset; | |
| node_addrspace_offset = nid_to_addrbase(node); | |
| pr_info("Node%d's addrspace_offset is 0x%lx\n", | |
| node, node_addrspace_offset); | |
| get_pfn_range_for_nid(node, &start_pfn, &end_pfn); | |
| pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n", | |
| node, start_pfn, end_pfn); | |
| alloc_node_data(node); | |
| } | |
| #ifdef CONFIG_ACPI_NUMA | |
| static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type) | |
| { | |
| static unsigned long num_physpages; | |
| num_physpages += (size >> PAGE_SHIFT); | |
| pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", | |
| node, type, start, size); | |
| pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", | |
| start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages); | |
| memblock_set_node(start, size, &memblock.memory, node); | |
| } | |
| /* | |
| * add_numamem_region | |
| * | |
| * Add a uasable memory region described by BIOS. The | |
| * routine gets each intersection between BIOS's region | |
| * and node's region, and adds them into node's memblock | |
| * pool. | |
| * | |
| */ | |
| static void __init add_numamem_region(u64 start, u64 end, u32 type) | |
| { | |
| u32 i; | |
| u64 ofs = start; | |
| if (start >= end) { | |
| pr_debug("Invalid region: %016llx-%016llx\n", start, end); | |
| return; | |
| } | |
| for (i = 0; i < numa_meminfo.nr_blks; i++) { | |
| struct numa_memblk *mb = &numa_meminfo.blk[i]; | |
| if (ofs > mb->end) | |
| continue; | |
| if (end > mb->end) { | |
| add_node_intersection(mb->nid, ofs, mb->end - ofs, type); | |
| ofs = mb->end; | |
| } else { | |
| add_node_intersection(mb->nid, ofs, end - ofs, type); | |
| break; | |
| } | |
| } | |
| } | |
| static void __init init_node_memblock(void) | |
| { | |
| u32 mem_type; | |
| u64 mem_end, mem_start, mem_size; | |
| efi_memory_desc_t *md; | |
| /* Parse memory information and activate */ | |
| for_each_efi_memory_desc(md) { | |
| mem_type = md->type; | |
| mem_start = md->phys_addr; | |
| mem_size = md->num_pages << EFI_PAGE_SHIFT; | |
| mem_end = mem_start + mem_size; | |
| switch (mem_type) { | |
| case EFI_LOADER_CODE: | |
| case EFI_LOADER_DATA: | |
| case EFI_BOOT_SERVICES_CODE: | |
| case EFI_BOOT_SERVICES_DATA: | |
| case EFI_PERSISTENT_MEMORY: | |
| case EFI_CONVENTIONAL_MEMORY: | |
| add_numamem_region(mem_start, mem_end, mem_type); | |
| break; | |
| case EFI_PAL_CODE: | |
| case EFI_UNUSABLE_MEMORY: | |
| case EFI_ACPI_RECLAIM_MEMORY: | |
| add_numamem_region(mem_start, mem_end, mem_type); | |
| fallthrough; | |
| case EFI_RESERVED_TYPE: | |
| case EFI_RUNTIME_SERVICES_CODE: | |
| case EFI_RUNTIME_SERVICES_DATA: | |
| case EFI_MEMORY_MAPPED_IO: | |
| case EFI_MEMORY_MAPPED_IO_PORT_SPACE: | |
| pr_info("Resvd: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", | |
| mem_type, mem_start, mem_size); | |
| break; | |
| } | |
| } | |
| } | |
| static void __init numa_default_distance(void) | |
| { | |
| int row, col; | |
| for (row = 0; row < MAX_NUMNODES; row++) | |
| for (col = 0; col < MAX_NUMNODES; col++) { | |
| if (col == row) | |
| node_distances[row][col] = LOCAL_DISTANCE; | |
| else | |
| /* We assume that one node per package here! | |
| * | |
| * A SLIT should be used for multiple nodes | |
| * per package to override default setting. | |
| */ | |
| node_distances[row][col] = REMOTE_DISTANCE; | |
| } | |
| } | |
| /* | |
| * fake_numa_init() - For Non-ACPI systems | |
| * Return: 0 on success, -errno on failure. | |
| */ | |
| static int __init fake_numa_init(void) | |
| { | |
| phys_addr_t start = memblock_start_of_DRAM(); | |
| phys_addr_t end = memblock_end_of_DRAM() - 1; | |
| node_set(0, numa_nodes_parsed); | |
| pr_info("Faking a node at [mem %pap-%pap]\n", &start, &end); | |
| return numa_add_memblk(0, start, end + 1); | |
| } | |
| int __init init_numa_memory(void) | |
| { | |
| int i; | |
| int ret; | |
| int node; | |
| for (i = 0; i < NR_CPUS; i++) | |
| set_cpuid_to_node(i, NUMA_NO_NODE); | |
| numa_default_distance(); | |
| nodes_clear(numa_nodes_parsed); | |
| nodes_clear(node_possible_map); | |
| nodes_clear(node_online_map); | |
| memset(&numa_meminfo, 0, sizeof(numa_meminfo)); | |
| /* Parse SRAT and SLIT if provided by firmware. */ | |
| ret = acpi_disabled ? fake_numa_init() : acpi_numa_init(); | |
| if (ret < 0) | |
| return ret; | |
| node_possible_map = numa_nodes_parsed; | |
| if (WARN_ON(nodes_empty(node_possible_map))) | |
| return -EINVAL; | |
| init_node_memblock(); | |
| if (!memblock_validate_numa_coverage(SZ_1M)) | |
| return -EINVAL; | |
| for_each_node_mask(node, node_possible_map) { | |
| node_mem_init(node); | |
| node_set_online(node); | |
| } | |
| max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); | |
| setup_nr_node_ids(); | |
| loongson_sysconf.nr_nodes = nr_node_ids; | |
| loongson_sysconf.cores_per_node = cpumask_weight(&phys_cpus_on_node[0]); | |
| return 0; | |
| } | |
| #endif | |
| void __init paging_init(void) | |
| { | |
| unsigned int node; | |
| unsigned long zones_size[MAX_NR_ZONES] = {0, }; | |
| for_each_online_node(node) { | |
| unsigned long start_pfn, end_pfn; | |
| get_pfn_range_for_nid(node, &start_pfn, &end_pfn); | |
| if (end_pfn > max_low_pfn) | |
| max_low_pfn = end_pfn; | |
| } | |
| #ifdef CONFIG_ZONE_DMA32 | |
| zones_size[ZONE_DMA32] = MAX_DMA32_PFN; | |
| #endif | |
| zones_size[ZONE_NORMAL] = max_low_pfn; | |
| free_area_init(zones_size); | |
| } | |
| void __init mem_init(void) | |
| { | |
| high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); | |
| memblock_free_all(); | |
| } | |
| int pcibus_to_node(struct pci_bus *bus) | |
| { | |
| return dev_to_node(&bus->dev); | |
| } | |
| EXPORT_SYMBOL(pcibus_to_node); |