| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * PowerNV OPAL high level interfaces | |
| * | |
| * Copyright 2011 IBM Corp. | |
| */ | |
| #define pr_fmt(fmt) "opal: " fmt | |
| #include <linux/printk.h> | |
| #include <linux/types.h> | |
| #include <linux/of.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/of_address.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/notifier.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched.h> | |
| #include <linux/kobject.h> | |
| #include <linux/delay.h> | |
| #include <linux/memblock.h> | |
| #include <linux/kthread.h> | |
| #include <linux/freezer.h> | |
| #include <linux/kmsg_dump.h> | |
| #include <linux/console.h> | |
| #include <linux/sched/debug.h> | |
| #include <asm/machdep.h> | |
| #include <asm/opal.h> | |
| #include <asm/firmware.h> | |
| #include <asm/mce.h> | |
| #include <asm/imc-pmu.h> | |
| #include <asm/bug.h> | |
| #include "powernv.h" | |
| #define OPAL_MSG_QUEUE_MAX 16 | |
| struct opal_msg_node { | |
| struct list_head list; | |
| struct opal_msg msg; | |
| }; | |
| static DEFINE_SPINLOCK(msg_list_lock); | |
| static LIST_HEAD(msg_list); | |
| /* /sys/firmware/opal */ | |
| struct kobject *opal_kobj; | |
| struct opal { | |
| u64 base; | |
| u64 entry; | |
| u64 size; | |
| } opal; | |
| struct mcheck_recoverable_range { | |
| u64 start_addr; | |
| u64 end_addr; | |
| u64 recover_addr; | |
| }; | |
| static int msg_list_size; | |
| static struct mcheck_recoverable_range *mc_recoverable_range; | |
| static int mc_recoverable_range_len; | |
| struct device_node *opal_node; | |
| static DEFINE_SPINLOCK(opal_write_lock); | |
| static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; | |
| static uint32_t opal_heartbeat; | |
| static struct task_struct *kopald_tsk; | |
| static struct opal_msg *opal_msg; | |
| static u32 opal_msg_size __ro_after_init; | |
| void __init opal_configure_cores(void) | |
| { | |
| u64 reinit_flags = 0; | |
| /* Do the actual re-init, This will clobber all FPRs, VRs, etc... | |
| * | |
| * It will preserve non volatile GPRs and HSPRG0/1. It will | |
| * also restore HIDs and other SPRs to their original value | |
| * but it might clobber a bunch. | |
| */ | |
| #ifdef __BIG_ENDIAN__ | |
| reinit_flags |= OPAL_REINIT_CPUS_HILE_BE; | |
| #else | |
| reinit_flags |= OPAL_REINIT_CPUS_HILE_LE; | |
| #endif | |
| /* | |
| * POWER9 always support running hash: | |
| * ie. Host hash supports hash guests | |
| * Host radix supports hash/radix guests | |
| */ | |
| if (early_cpu_has_feature(CPU_FTR_ARCH_300)) { | |
| reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH; | |
| if (early_radix_enabled()) | |
| reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX; | |
| } | |
| opal_reinit_cpus(reinit_flags); | |
| /* Restore some bits */ | |
| if (cur_cpu_spec->cpu_restore) | |
| cur_cpu_spec->cpu_restore(); | |
| } | |
| int __init early_init_dt_scan_opal(unsigned long node, | |
| const char *uname, int depth, void *data) | |
| { | |
| const void *basep, *entryp, *sizep; | |
| int basesz, entrysz, runtimesz; | |
| if (depth != 1 || strcmp(uname, "ibm,opal") != 0) | |
| return 0; | |
| basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz); | |
| entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz); | |
| sizep = of_get_flat_dt_prop(node, "opal-runtime-size", &runtimesz); | |
| if (!basep || !entryp || !sizep) | |
| return 1; | |
| opal.base = of_read_number(basep, basesz/4); | |
| opal.entry = of_read_number(entryp, entrysz/4); | |
| opal.size = of_read_number(sizep, runtimesz/4); | |
| pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%d)\n", | |
| opal.base, basep, basesz); | |
| pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%d)\n", | |
| opal.entry, entryp, entrysz); | |
| pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n", | |
| opal.size, sizep, runtimesz); | |
| if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { | |
| powerpc_firmware_features |= FW_FEATURE_OPAL; | |
| pr_debug("OPAL detected !\n"); | |
| } else { | |
| panic("OPAL != V3 detected, no longer supported.\n"); | |
| } | |
| return 1; | |
| } | |
| int __init early_init_dt_scan_recoverable_ranges(unsigned long node, | |
| const char *uname, int depth, void *data) | |
| { | |
| int i, psize, size; | |
| const __be32 *prop; | |
| if (depth != 1 || strcmp(uname, "ibm,opal") != 0) | |
| return 0; | |
| prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &psize); | |
| if (!prop) | |
| return 1; | |
| pr_debug("Found machine check recoverable ranges.\n"); | |
| /* | |
| * Calculate number of available entries. | |
| * | |
| * Each recoverable address range entry is (start address, len, | |
| * recovery address), 2 cells each for start and recovery address, | |
| * 1 cell for len, totalling 5 cells per entry. | |
| */ | |
| mc_recoverable_range_len = psize / (sizeof(*prop) * 5); | |
| /* Sanity check */ | |
| if (!mc_recoverable_range_len) | |
| return 1; | |
| /* Size required to hold all the entries. */ | |
| size = mc_recoverable_range_len * | |
| sizeof(struct mcheck_recoverable_range); | |
| /* | |
| * Allocate a buffer to hold the MC recoverable ranges. | |
| */ | |
| mc_recoverable_range = memblock_alloc(size, __alignof__(u64)); | |
| if (!mc_recoverable_range) | |
| panic("%s: Failed to allocate %u bytes align=0x%lx\n", | |
| __func__, size, __alignof__(u64)); | |
| for (i = 0; i < mc_recoverable_range_len; i++) { | |
| mc_recoverable_range[i].start_addr = | |
| of_read_number(prop + (i * 5) + 0, 2); | |
| mc_recoverable_range[i].end_addr = | |
| mc_recoverable_range[i].start_addr + | |
| of_read_number(prop + (i * 5) + 2, 1); | |
| mc_recoverable_range[i].recover_addr = | |
| of_read_number(prop + (i * 5) + 3, 2); | |
| pr_debug("Machine check recoverable range: %llx..%llx: %llx\n", | |
| mc_recoverable_range[i].start_addr, | |
| mc_recoverable_range[i].end_addr, | |
| mc_recoverable_range[i].recover_addr); | |
| } | |
| return 1; | |
| } | |
| static int __init opal_register_exception_handlers(void) | |
| { | |
| #ifdef __BIG_ENDIAN__ | |
| u64 glue; | |
| if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) | |
| return -ENODEV; | |
| /* Hookup some exception handlers except machine check. We use the | |
| * fwnmi area at 0x7000 to provide the glue space to OPAL | |
| */ | |
| glue = 0x7000; | |
| /* | |
| * Only ancient OPAL firmware requires this. | |
| * Specifically, firmware from FW810.00 (released June 2014) | |
| * through FW810.20 (Released October 2014). | |
| * | |
| * Check if we are running on newer (post Oct 2014) firmware that | |
| * exports the OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to | |
| * patch the HMI interrupt and we catch it directly in Linux. | |
| * | |
| * For older firmware (i.e < FW810.20), we fallback to old behavior and | |
| * let OPAL patch the HMI vector and handle it inside OPAL firmware. | |
| * | |
| * For newer firmware we catch/handle the HMI directly in Linux. | |
| */ | |
| if (!opal_check_token(OPAL_HANDLE_HMI)) { | |
| pr_info("Old firmware detected, OPAL handles HMIs.\n"); | |
| opal_register_exception_handler( | |
| OPAL_HYPERVISOR_MAINTENANCE_HANDLER, | |
| 0, glue); | |
| glue += 128; | |
| } | |
| /* | |
| * Only applicable to ancient firmware, all modern | |
| * (post March 2015/skiboot 5.0) firmware will just return | |
| * OPAL_UNSUPPORTED. | |
| */ | |
| opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); | |
| #endif | |
| return 0; | |
| } | |
| machine_early_initcall(powernv, opal_register_exception_handlers); | |
| static void queue_replay_msg(void *msg) | |
| { | |
| struct opal_msg_node *msg_node; | |
| if (msg_list_size < OPAL_MSG_QUEUE_MAX) { | |
| msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); | |
| if (msg_node) { | |
| INIT_LIST_HEAD(&msg_node->list); | |
| memcpy(&msg_node->msg, msg, sizeof(struct opal_msg)); | |
| list_add_tail(&msg_node->list, &msg_list); | |
| msg_list_size++; | |
| } else | |
| pr_warn_once("message queue no memory\n"); | |
| if (msg_list_size >= OPAL_MSG_QUEUE_MAX) | |
| pr_warn_once("message queue full\n"); | |
| } | |
| } | |
| static void dequeue_replay_msg(enum opal_msg_type msg_type) | |
| { | |
| struct opal_msg_node *msg_node, *tmp; | |
| list_for_each_entry_safe(msg_node, tmp, &msg_list, list) { | |
| if (be32_to_cpu(msg_node->msg.msg_type) != msg_type) | |
| continue; | |
| atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], | |
| msg_type, | |
| &msg_node->msg); | |
| list_del(&msg_node->list); | |
| kfree(msg_node); | |
| msg_list_size--; | |
| } | |
| } | |
| /* | |
| * Opal message notifier based on message type. Allow subscribers to get | |
| * notified for specific messgae type. | |
| */ | |
| int opal_message_notifier_register(enum opal_msg_type msg_type, | |
| struct notifier_block *nb) | |
| { | |
| int ret; | |
| unsigned long flags; | |
| if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) { | |
| pr_warn("%s: Invalid arguments, msg_type:%d\n", | |
| __func__, msg_type); | |
| return -EINVAL; | |
| } | |
| spin_lock_irqsave(&msg_list_lock, flags); | |
| ret = atomic_notifier_chain_register( | |
| &opal_msg_notifier_head[msg_type], nb); | |
| /* | |
| * If the registration succeeded, replay any queued messages that came | |
| * in prior to the notifier chain registration. msg_list_lock held here | |
| * to ensure they're delivered prior to any subsequent messages. | |
| */ | |
| if (ret == 0) | |
| dequeue_replay_msg(msg_type); | |
| spin_unlock_irqrestore(&msg_list_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(opal_message_notifier_register); | |
| int opal_message_notifier_unregister(enum opal_msg_type msg_type, | |
| struct notifier_block *nb) | |
| { | |
| return atomic_notifier_chain_unregister( | |
| &opal_msg_notifier_head[msg_type], nb); | |
| } | |
| EXPORT_SYMBOL_GPL(opal_message_notifier_unregister); | |
| static void opal_message_do_notify(uint32_t msg_type, void *msg) | |
| { | |
| unsigned long flags; | |
| bool queued = false; | |
| spin_lock_irqsave(&msg_list_lock, flags); | |
| if (opal_msg_notifier_head[msg_type].head == NULL) { | |
| /* | |
| * Queue up the msg since no notifiers have registered | |
| * yet for this msg_type. | |
| */ | |
| queue_replay_msg(msg); | |
| queued = true; | |
| } | |
| spin_unlock_irqrestore(&msg_list_lock, flags); | |
| if (queued) | |
| return; | |
| /* notify subscribers */ | |
| atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], | |
| msg_type, msg); | |
| } | |
| static void opal_handle_message(void) | |
| { | |
| s64 ret; | |
| u32 type; | |
| ret = opal_get_msg(__pa(opal_msg), opal_msg_size); | |
| /* No opal message pending. */ | |
| if (ret == OPAL_RESOURCE) | |
| return; | |
| /* check for errors. */ | |
| if (ret) { | |
| pr_warn("%s: Failed to retrieve opal message, err=%lld\n", | |
| __func__, ret); | |
| return; | |
| } | |
| type = be32_to_cpu(opal_msg->msg_type); | |
| /* Sanity check */ | |
| if (type >= OPAL_MSG_TYPE_MAX) { | |
| pr_warn_once("%s: Unknown message type: %u\n", __func__, type); | |
| return; | |
| } | |
| opal_message_do_notify(type, (void *)opal_msg); | |
| } | |
| static irqreturn_t opal_message_notify(int irq, void *data) | |
| { | |
| opal_handle_message(); | |
| return IRQ_HANDLED; | |
| } | |
| static int __init opal_message_init(struct device_node *opal_node) | |
| { | |
| int ret, i, irq; | |
| ret = of_property_read_u32(opal_node, "opal-msg-size", &opal_msg_size); | |
| if (ret) { | |
| pr_notice("Failed to read opal-msg-size property\n"); | |
| opal_msg_size = sizeof(struct opal_msg); | |
| } | |
| opal_msg = kmalloc(opal_msg_size, GFP_KERNEL); | |
| if (!opal_msg) { | |
| opal_msg_size = sizeof(struct opal_msg); | |
| /* Try to allocate fixed message size */ | |
| opal_msg = kmalloc(opal_msg_size, GFP_KERNEL); | |
| BUG_ON(opal_msg == NULL); | |
| } | |
| for (i = 0; i < OPAL_MSG_TYPE_MAX; i++) | |
| ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]); | |
| irq = opal_event_request(ilog2(OPAL_EVENT_MSG_PENDING)); | |
| if (!irq) { | |
| pr_err("%s: Can't register OPAL event irq (%d)\n", | |
| __func__, irq); | |
| return irq; | |
| } | |
| ret = request_irq(irq, opal_message_notify, | |
| IRQ_TYPE_LEVEL_HIGH, "opal-msg", NULL); | |
| if (ret) { | |
| pr_err("%s: Can't request OPAL event irq (%d)\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| ssize_t opal_get_chars(uint32_t vtermno, u8 *buf, size_t count) | |
| { | |
| s64 rc; | |
| __be64 evt, len; | |
| if (!opal.entry) | |
| return -ENODEV; | |
| opal_poll_events(&evt); | |
| if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0) | |
| return 0; | |
| len = cpu_to_be64(count); | |
| rc = opal_console_read(vtermno, &len, buf); | |
| if (rc == OPAL_SUCCESS) | |
| return be64_to_cpu(len); | |
| return 0; | |
| } | |
| static ssize_t __opal_put_chars(uint32_t vtermno, const u8 *data, | |
| size_t total_len, bool atomic) | |
| { | |
| unsigned long flags = 0 /* shut up gcc */; | |
| ssize_t written; | |
| __be64 olen; | |
| s64 rc; | |
| if (!opal.entry) | |
| return -ENODEV; | |
| if (atomic) | |
| spin_lock_irqsave(&opal_write_lock, flags); | |
| rc = opal_console_write_buffer_space(vtermno, &olen); | |
| if (rc || be64_to_cpu(olen) < total_len) { | |
| /* Closed -> drop characters */ | |
| if (rc) | |
| written = total_len; | |
| else | |
| written = -EAGAIN; | |
| goto out; | |
| } | |
| /* Should not get a partial write here because space is available. */ | |
| olen = cpu_to_be64(total_len); | |
| rc = opal_console_write(vtermno, &olen, data); | |
| if (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | |
| if (rc == OPAL_BUSY_EVENT) | |
| opal_poll_events(NULL); | |
| written = -EAGAIN; | |
| goto out; | |
| } | |
| /* Closed or other error drop */ | |
| if (rc != OPAL_SUCCESS) { | |
| written = opal_error_code(rc); | |
| goto out; | |
| } | |
| written = be64_to_cpu(olen); | |
| if (written < total_len) { | |
| if (atomic) { | |
| /* Should not happen */ | |
| pr_warn("atomic console write returned partial " | |
| "len=%zu written=%zd\n", total_len, written); | |
| } | |
| if (!written) | |
| written = -EAGAIN; | |
| } | |
| out: | |
| if (atomic) | |
| spin_unlock_irqrestore(&opal_write_lock, flags); | |
| return written; | |
| } | |
| ssize_t opal_put_chars(uint32_t vtermno, const u8 *data, size_t total_len) | |
| { | |
| return __opal_put_chars(vtermno, data, total_len, false); | |
| } | |
| /* | |
| * opal_put_chars_atomic will not perform partial-writes. Data will be | |
| * atomically written to the terminal or not at all. This is not strictly | |
| * true at the moment because console space can race with OPAL's console | |
| * writes. | |
| */ | |
| ssize_t opal_put_chars_atomic(uint32_t vtermno, const u8 *data, | |
| size_t total_len) | |
| { | |
| return __opal_put_chars(vtermno, data, total_len, true); | |
| } | |
| static s64 __opal_flush_console(uint32_t vtermno) | |
| { | |
| s64 rc; | |
| if (!opal_check_token(OPAL_CONSOLE_FLUSH)) { | |
| __be64 evt; | |
| /* | |
| * If OPAL_CONSOLE_FLUSH is not implemented in the firmware, | |
| * the console can still be flushed by calling the polling | |
| * function while it has OPAL_EVENT_CONSOLE_OUTPUT events. | |
| */ | |
| WARN_ONCE(1, "opal: OPAL_CONSOLE_FLUSH missing.\n"); | |
| opal_poll_events(&evt); | |
| if (!(be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_OUTPUT)) | |
| return OPAL_SUCCESS; | |
| return OPAL_BUSY; | |
| } else { | |
| rc = opal_console_flush(vtermno); | |
| if (rc == OPAL_BUSY_EVENT) { | |
| opal_poll_events(NULL); | |
| rc = OPAL_BUSY; | |
| } | |
| return rc; | |
| } | |
| } | |
| /* | |
| * opal_flush_console spins until the console is flushed | |
| */ | |
| int opal_flush_console(uint32_t vtermno) | |
| { | |
| for (;;) { | |
| s64 rc = __opal_flush_console(vtermno); | |
| if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) { | |
| mdelay(1); | |
| continue; | |
| } | |
| return opal_error_code(rc); | |
| } | |
| } | |
| /* | |
| * opal_flush_chars is an hvc interface that sleeps until the console is | |
| * flushed if wait, otherwise it will return -EBUSY if the console has data, | |
| * -EAGAIN if it has data and some of it was flushed. | |
| */ | |
| int opal_flush_chars(uint32_t vtermno, bool wait) | |
| { | |
| for (;;) { | |
| s64 rc = __opal_flush_console(vtermno); | |
| if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) { | |
| if (wait) { | |
| msleep(OPAL_BUSY_DELAY_MS); | |
| continue; | |
| } | |
| if (rc == OPAL_PARTIAL) | |
| return -EAGAIN; | |
| } | |
| return opal_error_code(rc); | |
| } | |
| } | |
| static int opal_recover_mce(struct pt_regs *regs, | |
| struct machine_check_event *evt) | |
| { | |
| int recovered = 0; | |
| if (regs_is_unrecoverable(regs)) { | |
| /* If MSR_RI isn't set, we cannot recover */ | |
| pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n"); | |
| recovered = 0; | |
| } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) { | |
| /* Platform corrected itself */ | |
| recovered = 1; | |
| } else if (evt->severity == MCE_SEV_FATAL) { | |
| /* Fatal machine check */ | |
| pr_err("Machine check interrupt is fatal\n"); | |
| recovered = 0; | |
| } | |
| if (!recovered && evt->sync_error) { | |
| /* | |
| * Try to kill processes if we get a synchronous machine check | |
| * (e.g., one caused by execution of this instruction). This | |
| * will devolve into a panic if we try to kill init or are in | |
| * an interrupt etc. | |
| * | |
| * TODO: Queue up this address for hwpoisioning later. | |
| * TODO: This is not quite right for d-side machine | |
| * checks ->nip is not necessarily the important | |
| * address. | |
| */ | |
| if ((user_mode(regs))) { | |
| _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); | |
| recovered = 1; | |
| } else if (die_will_crash()) { | |
| /* | |
| * die() would kill the kernel, so better to go via | |
| * the platform reboot code that will log the | |
| * machine check. | |
| */ | |
| recovered = 0; | |
| } else { | |
| die_mce("Machine check", regs, SIGBUS); | |
| recovered = 1; | |
| } | |
| } | |
| return recovered; | |
| } | |
| void __noreturn pnv_platform_error_reboot(struct pt_regs *regs, const char *msg) | |
| { | |
| panic_flush_kmsg_start(); | |
| pr_emerg("Hardware platform error: %s\n", msg); | |
| if (regs) | |
| show_regs(regs); | |
| smp_send_stop(); | |
| panic_flush_kmsg_end(); | |
| /* | |
| * Don't bother to shut things down because this will | |
| * xstop the system. | |
| */ | |
| if (opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, msg) | |
| == OPAL_UNSUPPORTED) { | |
| pr_emerg("Reboot type %d not supported for %s\n", | |
| OPAL_REBOOT_PLATFORM_ERROR, msg); | |
| } | |
| /* | |
| * We reached here. There can be three possibilities: | |
| * 1. We are running on a firmware level that do not support | |
| * opal_cec_reboot2() | |
| * 2. We are running on a firmware level that do not support | |
| * OPAL_REBOOT_PLATFORM_ERROR reboot type. | |
| * 3. We are running on FSP based system that does not need | |
| * opal to trigger checkstop explicitly for error analysis. | |
| * The FSP PRD component would have already got notified | |
| * about this error through other channels. | |
| * 4. We are running on a newer skiboot that by default does | |
| * not cause a checkstop, drops us back to the kernel to | |
| * extract context and state at the time of the error. | |
| */ | |
| panic(msg); | |
| } | |
| int opal_machine_check(struct pt_regs *regs) | |
| { | |
| struct machine_check_event evt; | |
| if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) | |
| return 0; | |
| /* Print things out */ | |
| if (evt.version != MCE_V1) { | |
| pr_err("Machine Check Exception, Unknown event version %d !\n", | |
| evt.version); | |
| return 0; | |
| } | |
| machine_check_print_event_info(&evt, user_mode(regs), false); | |
| if (opal_recover_mce(regs, &evt)) | |
| return 1; | |
| pnv_platform_error_reboot(regs, "Unrecoverable Machine Check exception"); | |
| } | |
| /* Early hmi handler called in real mode. */ | |
| int opal_hmi_exception_early(struct pt_regs *regs) | |
| { | |
| s64 rc; | |
| /* | |
| * call opal hmi handler. Pass paca address as token. | |
| * The return value OPAL_SUCCESS is an indication that there is | |
| * an HMI event generated waiting to pull by Linux. | |
| */ | |
| rc = opal_handle_hmi(); | |
| if (rc == OPAL_SUCCESS) { | |
| local_paca->hmi_event_available = 1; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| int opal_hmi_exception_early2(struct pt_regs *regs) | |
| { | |
| s64 rc; | |
| __be64 out_flags; | |
| /* | |
| * call opal hmi handler. | |
| * Check 64-bit flag mask to find out if an event was generated, | |
| * and whether TB is still valid or not etc. | |
| */ | |
| rc = opal_handle_hmi2(&out_flags); | |
| if (rc != OPAL_SUCCESS) | |
| return 0; | |
| if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_NEW_EVENT) | |
| local_paca->hmi_event_available = 1; | |
| if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_TOD_TB_FAIL) | |
| tb_invalid = true; | |
| return 1; | |
| } | |
| /* HMI exception handler called in virtual mode when irqs are next enabled. */ | |
| int opal_handle_hmi_exception(struct pt_regs *regs) | |
| { | |
| /* | |
| * Check if HMI event is available. | |
| * if Yes, then wake kopald to process them. | |
| */ | |
| if (!local_paca->hmi_event_available) | |
| return 0; | |
| local_paca->hmi_event_available = 0; | |
| opal_wake_poller(); | |
| return 1; | |
| } | |
| static uint64_t find_recovery_address(uint64_t nip) | |
| { | |
| int i; | |
| for (i = 0; i < mc_recoverable_range_len; i++) | |
| if ((nip >= mc_recoverable_range[i].start_addr) && | |
| (nip < mc_recoverable_range[i].end_addr)) | |
| return mc_recoverable_range[i].recover_addr; | |
| return 0; | |
| } | |
| bool opal_mce_check_early_recovery(struct pt_regs *regs) | |
| { | |
| uint64_t recover_addr = 0; | |
| if (!opal.base || !opal.size) | |
| goto out; | |
| if ((regs->nip >= opal.base) && | |
| (regs->nip < (opal.base + opal.size))) | |
| recover_addr = find_recovery_address(regs->nip); | |
| /* | |
| * Setup regs->nip to rfi into fixup address. | |
| */ | |
| if (recover_addr) | |
| regs_set_return_ip(regs, recover_addr); | |
| out: | |
| return !!recover_addr; | |
| } | |
| static int __init opal_sysfs_init(void) | |
| { | |
| opal_kobj = kobject_create_and_add("opal", firmware_kobj); | |
| if (!opal_kobj) { | |
| pr_warn("kobject_create_and_add opal failed\n"); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static int opal_add_one_export(struct kobject *parent, const char *export_name, | |
| struct device_node *np, const char *prop_name) | |
| { | |
| struct bin_attribute *attr = NULL; | |
| const char *name = NULL; | |
| u64 vals[2]; | |
| int rc; | |
| rc = of_property_read_u64_array(np, prop_name, &vals[0], 2); | |
| if (rc) | |
| goto out; | |
| attr = kzalloc(sizeof(*attr), GFP_KERNEL); | |
| if (!attr) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| name = kstrdup(export_name, GFP_KERNEL); | |
| if (!name) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| sysfs_bin_attr_init(attr); | |
| attr->attr.name = name; | |
| attr->attr.mode = 0400; | |
| attr->read = sysfs_bin_attr_simple_read; | |
| attr->private = __va(vals[0]); | |
| attr->size = vals[1]; | |
| rc = sysfs_create_bin_file(parent, attr); | |
| out: | |
| if (rc) { | |
| kfree(name); | |
| kfree(attr); | |
| } | |
| return rc; | |
| } | |
| static void opal_add_exported_attrs(struct device_node *np, | |
| struct kobject *kobj) | |
| { | |
| struct device_node *child; | |
| struct property *prop; | |
| for_each_property_of_node(np, prop) { | |
| int rc; | |
| if (!strcmp(prop->name, "name") || | |
| !strcmp(prop->name, "phandle")) | |
| continue; | |
| rc = opal_add_one_export(kobj, prop->name, np, prop->name); | |
| if (rc) { | |
| pr_warn("Unable to add export %pOF/%s, rc = %d!\n", | |
| np, prop->name, rc); | |
| } | |
| } | |
| for_each_child_of_node(np, child) { | |
| struct kobject *child_kobj; | |
| child_kobj = kobject_create_and_add(child->name, kobj); | |
| if (!child_kobj) { | |
| pr_err("Unable to create export dir for %pOF\n", child); | |
| continue; | |
| } | |
| opal_add_exported_attrs(child, child_kobj); | |
| } | |
| } | |
| /* | |
| * opal_export_attrs: creates a sysfs node for each property listed in | |
| * the device-tree under /ibm,opal/firmware/exports/ | |
| * All new sysfs nodes are created under /opal/exports/. | |
| * This allows for reserved memory regions (e.g. HDAT) to be read. | |
| * The new sysfs nodes are only readable by root. | |
| */ | |
| static void opal_export_attrs(void) | |
| { | |
| struct device_node *np; | |
| struct kobject *kobj; | |
| int rc; | |
| np = of_find_node_by_path("/ibm,opal/firmware/exports"); | |
| if (!np) | |
| return; | |
| /* Create new 'exports' directory - /sys/firmware/opal/exports */ | |
| kobj = kobject_create_and_add("exports", opal_kobj); | |
| if (!kobj) { | |
| pr_warn("kobject_create_and_add() of exports failed\n"); | |
| of_node_put(np); | |
| return; | |
| } | |
| opal_add_exported_attrs(np, kobj); | |
| /* | |
| * NB: symbol_map existed before the generic export interface so it | |
| * lives under the top level opal_kobj. | |
| */ | |
| rc = opal_add_one_export(opal_kobj, "symbol_map", | |
| np->parent, "symbol-map"); | |
| if (rc) | |
| pr_warn("Error %d creating OPAL symbols file\n", rc); | |
| of_node_put(np); | |
| } | |
| static void __init opal_dump_region_init(void) | |
| { | |
| void *addr; | |
| uint64_t size; | |
| int rc; | |
| if (!opal_check_token(OPAL_REGISTER_DUMP_REGION)) | |
| return; | |
| /* Register kernel log buffer */ | |
| addr = log_buf_addr_get(); | |
| if (addr == NULL) | |
| return; | |
| size = log_buf_len_get(); | |
| if (size == 0) | |
| return; | |
| rc = opal_register_dump_region(OPAL_DUMP_REGION_LOG_BUF, | |
| __pa(addr), size); | |
| /* Don't warn if this is just an older OPAL that doesn't | |
| * know about that call | |
| */ | |
| if (rc && rc != OPAL_UNSUPPORTED) | |
| pr_warn("DUMP: Failed to register kernel log buffer. " | |
| "rc = %d\n", rc); | |
| } | |
| static void __init opal_pdev_init(const char *compatible) | |
| { | |
| struct device_node *np; | |
| for_each_compatible_node(np, NULL, compatible) | |
| of_platform_device_create(np, NULL, NULL); | |
| } | |
| static void __init opal_imc_init_dev(void) | |
| { | |
| struct device_node *np; | |
| np = of_find_compatible_node(NULL, NULL, IMC_DTB_COMPAT); | |
| if (np) | |
| of_platform_device_create(np, NULL, NULL); | |
| of_node_put(np); | |
| } | |
| static int kopald(void *unused) | |
| { | |
| unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1; | |
| set_freezable(); | |
| do { | |
| try_to_freeze(); | |
| opal_handle_events(); | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| if (opal_have_pending_events()) | |
| __set_current_state(TASK_RUNNING); | |
| else | |
| schedule_timeout(timeout); | |
| } while (!kthread_should_stop()); | |
| return 0; | |
| } | |
| void opal_wake_poller(void) | |
| { | |
| if (kopald_tsk) | |
| wake_up_process(kopald_tsk); | |
| } | |
| static void __init opal_init_heartbeat(void) | |
| { | |
| /* Old firwmware, we assume the HVC heartbeat is sufficient */ | |
| if (of_property_read_u32(opal_node, "ibm,heartbeat-ms", | |
| &opal_heartbeat) != 0) | |
| opal_heartbeat = 0; | |
| if (opal_heartbeat) | |
| kopald_tsk = kthread_run(kopald, NULL, "kopald"); | |
| } | |
| static int __init opal_init(void) | |
| { | |
| struct device_node *np, *consoles, *leds; | |
| int rc; | |
| opal_node = of_find_node_by_path("/ibm,opal"); | |
| if (!opal_node) { | |
| pr_warn("Device node not found\n"); | |
| return -ENODEV; | |
| } | |
| /* Register OPAL consoles if any ports */ | |
| consoles = of_find_node_by_path("/ibm,opal/consoles"); | |
| if (consoles) { | |
| for_each_child_of_node(consoles, np) { | |
| if (!of_node_name_eq(np, "serial")) | |
| continue; | |
| of_platform_device_create(np, NULL, NULL); | |
| } | |
| of_node_put(consoles); | |
| } | |
| /* Initialise OPAL messaging system */ | |
| opal_message_init(opal_node); | |
| /* Initialise OPAL asynchronous completion interface */ | |
| opal_async_comp_init(); | |
| /* Initialise OPAL sensor interface */ | |
| opal_sensor_init(); | |
| /* Initialise OPAL hypervisor maintainence interrupt handling */ | |
| opal_hmi_handler_init(); | |
| /* Create i2c platform devices */ | |
| opal_pdev_init("ibm,opal-i2c"); | |
| /* Handle non-volatile memory devices */ | |
| opal_pdev_init("pmem-region"); | |
| /* Setup a heatbeat thread if requested by OPAL */ | |
| opal_init_heartbeat(); | |
| /* Detect In-Memory Collection counters and create devices*/ | |
| opal_imc_init_dev(); | |
| /* Create leds platform devices */ | |
| leds = of_find_node_by_path("/ibm,opal/leds"); | |
| if (leds) { | |
| of_platform_device_create(leds, "opal_leds", NULL); | |
| of_node_put(leds); | |
| } | |
| /* Initialise OPAL message log interface */ | |
| opal_msglog_init(); | |
| /* Create "opal" kobject under /sys/firmware */ | |
| rc = opal_sysfs_init(); | |
| if (rc == 0) { | |
| /* Setup dump region interface */ | |
| opal_dump_region_init(); | |
| /* Setup error log interface */ | |
| rc = opal_elog_init(); | |
| /* Setup code update interface */ | |
| opal_flash_update_init(); | |
| /* Setup platform dump extract interface */ | |
| opal_platform_dump_init(); | |
| /* Setup system parameters interface */ | |
| opal_sys_param_init(); | |
| /* Setup message log sysfs interface. */ | |
| opal_msglog_sysfs_init(); | |
| /* Add all export properties*/ | |
| opal_export_attrs(); | |
| } | |
| /* Initialize platform devices: IPMI backend, PRD & flash interface */ | |
| opal_pdev_init("ibm,opal-ipmi"); | |
| opal_pdev_init("ibm,opal-flash"); | |
| opal_pdev_init("ibm,opal-prd"); | |
| /* Initialise platform device: oppanel interface */ | |
| opal_pdev_init("ibm,opal-oppanel"); | |
| /* Initialise OPAL kmsg dumper for flushing console on panic */ | |
| opal_kmsg_init(); | |
| /* Initialise OPAL powercap interface */ | |
| opal_powercap_init(); | |
| /* Initialise OPAL Power-Shifting-Ratio interface */ | |
| opal_psr_init(); | |
| /* Initialise OPAL sensor groups */ | |
| opal_sensor_groups_init(); | |
| /* Initialise OPAL Power control interface */ | |
| opal_power_control_init(); | |
| /* Initialize OPAL secure variables */ | |
| opal_pdev_init("ibm,secvar-backend"); | |
| return 0; | |
| } | |
| machine_subsys_initcall(powernv, opal_init); | |
| void opal_shutdown(void) | |
| { | |
| long rc = OPAL_BUSY; | |
| opal_event_shutdown(); | |
| /* | |
| * Then sync with OPAL which ensure anything that can | |
| * potentially write to our memory has completed such | |
| * as an ongoing dump retrieval | |
| */ | |
| while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | |
| rc = opal_sync_host_reboot(); | |
| if (rc == OPAL_BUSY) | |
| opal_poll_events(NULL); | |
| else | |
| mdelay(10); | |
| } | |
| /* Unregister memory dump region */ | |
| if (opal_check_token(OPAL_UNREGISTER_DUMP_REGION)) | |
| opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF); | |
| } | |
| /* Export this so that test modules can use it */ | |
| EXPORT_SYMBOL_GPL(opal_invalid_call); | |
| EXPORT_SYMBOL_GPL(opal_xscom_read); | |
| EXPORT_SYMBOL_GPL(opal_xscom_write); | |
| EXPORT_SYMBOL_GPL(opal_ipmi_send); | |
| EXPORT_SYMBOL_GPL(opal_ipmi_recv); | |
| EXPORT_SYMBOL_GPL(opal_flash_read); | |
| EXPORT_SYMBOL_GPL(opal_flash_write); | |
| EXPORT_SYMBOL_GPL(opal_flash_erase); | |
| EXPORT_SYMBOL_GPL(opal_prd_msg); | |
| EXPORT_SYMBOL_GPL(opal_check_token); | |
| /* Convert a region of vmalloc memory to an opal sg list */ | |
| struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, | |
| unsigned long vmalloc_size) | |
| { | |
| struct opal_sg_list *sg, *first = NULL; | |
| unsigned long i = 0; | |
| sg = kzalloc(PAGE_SIZE, GFP_KERNEL); | |
| if (!sg) | |
| goto nomem; | |
| first = sg; | |
| while (vmalloc_size > 0) { | |
| uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT; | |
| uint64_t length = min(vmalloc_size, PAGE_SIZE); | |
| sg->entry[i].data = cpu_to_be64(data); | |
| sg->entry[i].length = cpu_to_be64(length); | |
| i++; | |
| if (i >= SG_ENTRIES_PER_NODE) { | |
| struct opal_sg_list *next; | |
| next = kzalloc(PAGE_SIZE, GFP_KERNEL); | |
| if (!next) | |
| goto nomem; | |
| sg->length = cpu_to_be64( | |
| i * sizeof(struct opal_sg_entry) + 16); | |
| i = 0; | |
| sg->next = cpu_to_be64(__pa(next)); | |
| sg = next; | |
| } | |
| vmalloc_addr += length; | |
| vmalloc_size -= length; | |
| } | |
| sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16); | |
| return first; | |
| nomem: | |
| pr_err("%s : Failed to allocate memory\n", __func__); | |
| opal_free_sg_list(first); | |
| return NULL; | |
| } | |
| void opal_free_sg_list(struct opal_sg_list *sg) | |
| { | |
| while (sg) { | |
| uint64_t next = be64_to_cpu(sg->next); | |
| kfree(sg); | |
| if (next) | |
| sg = __va(next); | |
| else | |
| sg = NULL; | |
| } | |
| } | |
| int opal_error_code(int rc) | |
| { | |
| switch (rc) { | |
| case OPAL_SUCCESS: return 0; | |
| case OPAL_PARAMETER: return -EINVAL; | |
| case OPAL_ASYNC_COMPLETION: return -EINPROGRESS; | |
| case OPAL_BUSY: | |
| case OPAL_BUSY_EVENT: return -EBUSY; | |
| case OPAL_NO_MEM: return -ENOMEM; | |
| case OPAL_PERMISSION: return -EPERM; | |
| case OPAL_UNSUPPORTED: return -EIO; | |
| case OPAL_HARDWARE: return -EIO; | |
| case OPAL_INTERNAL_ERROR: return -EIO; | |
| case OPAL_TIMEOUT: return -ETIMEDOUT; | |
| default: | |
| pr_err("%s: unexpected OPAL error %d\n", __func__, rc); | |
| return -EIO; | |
| } | |
| } | |
| void powernv_set_nmmu_ptcr(unsigned long ptcr) | |
| { | |
| int rc; | |
| if (firmware_has_feature(FW_FEATURE_OPAL)) { | |
| rc = opal_nmmu_set_ptcr(-1UL, ptcr); | |
| if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED) | |
| pr_warn("%s: Unable to set nest mmu ptcr\n", __func__); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(opal_poll_events); | |
| EXPORT_SYMBOL_GPL(opal_rtc_read); | |
| EXPORT_SYMBOL_GPL(opal_rtc_write); | |
| EXPORT_SYMBOL_GPL(opal_tpo_read); | |
| EXPORT_SYMBOL_GPL(opal_tpo_write); | |
| EXPORT_SYMBOL_GPL(opal_i2c_request); | |
| /* Export these symbols for PowerNV LED class driver */ | |
| EXPORT_SYMBOL_GPL(opal_leds_get_ind); | |
| EXPORT_SYMBOL_GPL(opal_leds_set_ind); | |
| /* Export this symbol for PowerNV Operator Panel class driver */ | |
| EXPORT_SYMBOL_GPL(opal_write_oppanel_async); | |
| /* Export this for KVM */ | |
| EXPORT_SYMBOL_GPL(opal_int_set_mfrr); | |
| EXPORT_SYMBOL_GPL(opal_int_eoi); | |
| EXPORT_SYMBOL_GPL(opal_error_code); | |
| /* Export the below symbol for NX compression */ | |
| EXPORT_SYMBOL(opal_nx_coproc_init); |