| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * mcp9600.c - Support for Microchip MCP9600 thermocouple EMF converter | |
| * | |
| * Copyright (c) 2022 Andrew Hepp | |
| * Author: <andrew.hepp@ahepp.dev> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/bits.h> | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/math.h> | |
| #include <linux/minmax.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/module.h> | |
| #include <linux/iio/events.h> | |
| #include <linux/iio/iio.h> | |
| /* MCP9600 registers */ | |
| #define MCP9600_HOT_JUNCTION 0x0 | |
| #define MCP9600_COLD_JUNCTION 0x2 | |
| #define MCP9600_STATUS 0x4 | |
| #define MCP9600_STATUS_ALERT(x) BIT(x) | |
| #define MCP9600_ALERT_CFG1 0x8 | |
| #define MCP9600_ALERT_CFG(x) (MCP9600_ALERT_CFG1 + (x - 1)) | |
| #define MCP9600_ALERT_CFG_ENABLE BIT(0) | |
| #define MCP9600_ALERT_CFG_ACTIVE_HIGH BIT(2) | |
| #define MCP9600_ALERT_CFG_FALLING BIT(3) | |
| #define MCP9600_ALERT_CFG_COLD_JUNCTION BIT(4) | |
| #define MCP9600_ALERT_HYSTERESIS1 0xc | |
| #define MCP9600_ALERT_HYSTERESIS(x) (MCP9600_ALERT_HYSTERESIS1 + (x - 1)) | |
| #define MCP9600_ALERT_LIMIT1 0x10 | |
| #define MCP9600_ALERT_LIMIT(x) (MCP9600_ALERT_LIMIT1 + (x - 1)) | |
| #define MCP9600_ALERT_LIMIT_MASK GENMASK(15, 2) | |
| #define MCP9600_DEVICE_ID 0x20 | |
| /* MCP9600 device id value */ | |
| #define MCP9600_DEVICE_ID_MCP9600 0x40 | |
| #define MCP9600_ALERT_COUNT 4 | |
| #define MCP9600_MIN_TEMP_HOT_JUNCTION_MICRO -200000000 | |
| #define MCP9600_MAX_TEMP_HOT_JUNCTION_MICRO 1800000000 | |
| #define MCP9600_MIN_TEMP_COLD_JUNCTION_MICRO -40000000 | |
| #define MCP9600_MAX_TEMP_COLD_JUNCTION_MICRO 125000000 | |
| enum mcp9600_alert { | |
| MCP9600_ALERT1, | |
| MCP9600_ALERT2, | |
| MCP9600_ALERT3, | |
| MCP9600_ALERT4 | |
| }; | |
| static const char * const mcp9600_alert_name[MCP9600_ALERT_COUNT] = { | |
| [MCP9600_ALERT1] = "alert1", | |
| [MCP9600_ALERT2] = "alert2", | |
| [MCP9600_ALERT3] = "alert3", | |
| [MCP9600_ALERT4] = "alert4", | |
| }; | |
| static const struct iio_event_spec mcp9600_events[] = { | |
| { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_RISING, | |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE) | | |
| BIT(IIO_EV_INFO_VALUE) | | |
| BIT(IIO_EV_INFO_HYSTERESIS), | |
| }, | |
| { | |
| .type = IIO_EV_TYPE_THRESH, | |
| .dir = IIO_EV_DIR_FALLING, | |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE) | | |
| BIT(IIO_EV_INFO_VALUE) | | |
| BIT(IIO_EV_INFO_HYSTERESIS), | |
| }, | |
| }; | |
| #define MCP9600_CHANNELS(hj_num_ev, hj_ev_spec_off, cj_num_ev, cj_ev_spec_off) \ | |
| { \ | |
| { \ | |
| .type = IIO_TEMP, \ | |
| .address = MCP9600_HOT_JUNCTION, \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_SCALE), \ | |
| .event_spec = &mcp9600_events[hj_ev_spec_off], \ | |
| .num_event_specs = hj_num_ev, \ | |
| }, \ | |
| { \ | |
| .type = IIO_TEMP, \ | |
| .address = MCP9600_COLD_JUNCTION, \ | |
| .channel2 = IIO_MOD_TEMP_AMBIENT, \ | |
| .modified = 1, \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_SCALE), \ | |
| .event_spec = &mcp9600_events[cj_ev_spec_off], \ | |
| .num_event_specs = cj_num_ev, \ | |
| }, \ | |
| } | |
| static const struct iio_chan_spec mcp9600_channels[][2] = { | |
| MCP9600_CHANNELS(0, 0, 0, 0), /* Alerts: - - - - */ | |
| MCP9600_CHANNELS(1, 0, 0, 0), /* Alerts: 1 - - - */ | |
| MCP9600_CHANNELS(1, 1, 0, 0), /* Alerts: - 2 - - */ | |
| MCP9600_CHANNELS(2, 0, 0, 0), /* Alerts: 1 2 - - */ | |
| MCP9600_CHANNELS(0, 0, 1, 0), /* Alerts: - - 3 - */ | |
| MCP9600_CHANNELS(1, 0, 1, 0), /* Alerts: 1 - 3 - */ | |
| MCP9600_CHANNELS(1, 1, 1, 0), /* Alerts: - 2 3 - */ | |
| MCP9600_CHANNELS(2, 0, 1, 0), /* Alerts: 1 2 3 - */ | |
| MCP9600_CHANNELS(0, 0, 1, 1), /* Alerts: - - - 4 */ | |
| MCP9600_CHANNELS(1, 0, 1, 1), /* Alerts: 1 - - 4 */ | |
| MCP9600_CHANNELS(1, 1, 1, 1), /* Alerts: - 2 - 4 */ | |
| MCP9600_CHANNELS(2, 0, 1, 1), /* Alerts: 1 2 - 4 */ | |
| MCP9600_CHANNELS(0, 0, 2, 0), /* Alerts: - - 3 4 */ | |
| MCP9600_CHANNELS(1, 0, 2, 0), /* Alerts: 1 - 3 4 */ | |
| MCP9600_CHANNELS(1, 1, 2, 0), /* Alerts: - 2 3 4 */ | |
| MCP9600_CHANNELS(2, 0, 2, 0), /* Alerts: 1 2 3 4 */ | |
| }; | |
| struct mcp9600_data { | |
| struct i2c_client *client; | |
| }; | |
| static int mcp9600_read(struct mcp9600_data *data, | |
| struct iio_chan_spec const *chan, int *val) | |
| { | |
| int ret; | |
| ret = i2c_smbus_read_word_swapped(data->client, chan->address); | |
| if (ret < 0) | |
| return ret; | |
| *val = sign_extend32(ret, 15); | |
| return 0; | |
| } | |
| static int mcp9600_read_raw(struct iio_dev *indio_dev, | |
| struct iio_chan_spec const *chan, int *val, | |
| int *val2, long mask) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| int ret; | |
| switch (mask) { | |
| case IIO_CHAN_INFO_RAW: | |
| ret = mcp9600_read(data, chan, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SCALE: | |
| *val = 62; | |
| *val2 = 500000; | |
| return IIO_VAL_INT_PLUS_MICRO; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int mcp9600_get_alert_index(int channel2, enum iio_event_direction dir) | |
| { | |
| if (channel2 == IIO_MOD_TEMP_AMBIENT) { | |
| if (dir == IIO_EV_DIR_RISING) | |
| return MCP9600_ALERT3; | |
| else | |
| return MCP9600_ALERT4; | |
| } else { | |
| if (dir == IIO_EV_DIR_RISING) | |
| return MCP9600_ALERT1; | |
| else | |
| return MCP9600_ALERT2; | |
| } | |
| } | |
| static int mcp9600_read_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| struct i2c_client *client = data->client; | |
| int i, ret; | |
| i = mcp9600_get_alert_index(chan->channel2, dir); | |
| ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_CFG(i + 1)); | |
| if (ret < 0) | |
| return ret; | |
| return FIELD_GET(MCP9600_ALERT_CFG_ENABLE, ret); | |
| } | |
| static int mcp9600_write_event_config(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| int state) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| struct i2c_client *client = data->client; | |
| int i, ret; | |
| i = mcp9600_get_alert_index(chan->channel2, dir); | |
| ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_CFG(i + 1)); | |
| if (ret < 0) | |
| return ret; | |
| if (state) | |
| ret |= MCP9600_ALERT_CFG_ENABLE; | |
| else | |
| ret &= ~MCP9600_ALERT_CFG_ENABLE; | |
| return i2c_smbus_write_byte_data(client, MCP9600_ALERT_CFG(i + 1), ret); | |
| } | |
| static int mcp9600_read_thresh(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, int *val, int *val2) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| struct i2c_client *client = data->client; | |
| s32 ret; | |
| int i; | |
| i = mcp9600_get_alert_index(chan->channel2, dir); | |
| switch (info) { | |
| case IIO_EV_INFO_VALUE: | |
| ret = i2c_smbus_read_word_swapped(client, MCP9600_ALERT_LIMIT(i + 1)); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * Temperature is stored in two’s complement format in | |
| * bits(15:2), LSB is 0.25 degree celsius. | |
| */ | |
| *val = sign_extend32(FIELD_GET(MCP9600_ALERT_LIMIT_MASK, ret), 13); | |
| *val2 = 4; | |
| return IIO_VAL_FRACTIONAL; | |
| case IIO_EV_INFO_HYSTERESIS: | |
| ret = i2c_smbus_read_byte_data(client, MCP9600_ALERT_HYSTERESIS(i + 1)); | |
| if (ret < 0) | |
| return ret; | |
| *val = ret; | |
| return IIO_VAL_INT; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int mcp9600_write_thresh(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| enum iio_event_type type, | |
| enum iio_event_direction dir, | |
| enum iio_event_info info, int val, int val2) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| struct i2c_client *client = data->client; | |
| int s_val, i; | |
| s16 thresh; | |
| u8 hyst; | |
| i = mcp9600_get_alert_index(chan->channel2, dir); | |
| switch (info) { | |
| case IIO_EV_INFO_VALUE: | |
| /* Scale value to include decimal part into calculations */ | |
| s_val = (val < 0) ? ((val * 1000000) - val2) : | |
| ((val * 1000000) + val2); | |
| if (chan->channel2 == IIO_MOD_TEMP_AMBIENT) { | |
| s_val = max(s_val, MCP9600_MIN_TEMP_COLD_JUNCTION_MICRO); | |
| s_val = min(s_val, MCP9600_MAX_TEMP_COLD_JUNCTION_MICRO); | |
| } else { | |
| s_val = max(s_val, MCP9600_MIN_TEMP_HOT_JUNCTION_MICRO); | |
| s_val = min(s_val, MCP9600_MAX_TEMP_HOT_JUNCTION_MICRO); | |
| } | |
| /* | |
| * Shift length 4 bits = 2(15:2) + 2(0.25 LSB), temperature is | |
| * stored in two’s complement format. | |
| */ | |
| thresh = (s16)(s_val / (1000000 >> 4)); | |
| return i2c_smbus_write_word_swapped(client, | |
| MCP9600_ALERT_LIMIT(i + 1), | |
| thresh); | |
| case IIO_EV_INFO_HYSTERESIS: | |
| hyst = min(abs(val), 255); | |
| return i2c_smbus_write_byte_data(client, | |
| MCP9600_ALERT_HYSTERESIS(i + 1), | |
| hyst); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static const struct iio_info mcp9600_info = { | |
| .read_raw = mcp9600_read_raw, | |
| .read_event_config = mcp9600_read_event_config, | |
| .write_event_config = mcp9600_write_event_config, | |
| .read_event_value = mcp9600_read_thresh, | |
| .write_event_value = mcp9600_write_thresh, | |
| }; | |
| static irqreturn_t mcp9600_alert_handler(void *private, | |
| enum mcp9600_alert alert, | |
| enum iio_modifier mod, | |
| enum iio_event_direction dir) | |
| { | |
| struct iio_dev *indio_dev = private; | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| int ret; | |
| ret = i2c_smbus_read_byte_data(data->client, MCP9600_STATUS); | |
| if (ret < 0) | |
| return IRQ_HANDLED; | |
| if (!(ret & MCP9600_STATUS_ALERT(alert))) | |
| return IRQ_NONE; | |
| iio_push_event(indio_dev, | |
| IIO_MOD_EVENT_CODE(IIO_TEMP, 0, mod, IIO_EV_TYPE_THRESH, | |
| dir), | |
| iio_get_time_ns(indio_dev)); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t mcp9600_alert1_handler(int irq, void *private) | |
| { | |
| return mcp9600_alert_handler(private, MCP9600_ALERT1, IIO_NO_MOD, | |
| IIO_EV_DIR_RISING); | |
| } | |
| static irqreturn_t mcp9600_alert2_handler(int irq, void *private) | |
| { | |
| return mcp9600_alert_handler(private, MCP9600_ALERT2, IIO_NO_MOD, | |
| IIO_EV_DIR_FALLING); | |
| } | |
| static irqreturn_t mcp9600_alert3_handler(int irq, void *private) | |
| { | |
| return mcp9600_alert_handler(private, MCP9600_ALERT3, | |
| IIO_MOD_TEMP_AMBIENT, IIO_EV_DIR_RISING); | |
| } | |
| static irqreturn_t mcp9600_alert4_handler(int irq, void *private) | |
| { | |
| return mcp9600_alert_handler(private, MCP9600_ALERT4, | |
| IIO_MOD_TEMP_AMBIENT, IIO_EV_DIR_FALLING); | |
| } | |
| static irqreturn_t (*mcp9600_alert_handler_func[MCP9600_ALERT_COUNT]) (int, void *) = { | |
| mcp9600_alert1_handler, | |
| mcp9600_alert2_handler, | |
| mcp9600_alert3_handler, | |
| mcp9600_alert4_handler, | |
| }; | |
| static int mcp9600_probe_alerts(struct iio_dev *indio_dev) | |
| { | |
| struct mcp9600_data *data = iio_priv(indio_dev); | |
| struct i2c_client *client = data->client; | |
| struct device *dev = &client->dev; | |
| struct fwnode_handle *fwnode = dev_fwnode(dev); | |
| unsigned int irq_type; | |
| int ret, irq, i; | |
| u8 val, ch_sel; | |
| /* | |
| * alert1: hot junction, rising temperature | |
| * alert2: hot junction, falling temperature | |
| * alert3: cold junction, rising temperature | |
| * alert4: cold junction, falling temperature | |
| */ | |
| ch_sel = 0; | |
| for (i = 0; i < MCP9600_ALERT_COUNT; i++) { | |
| irq = fwnode_irq_get_byname(fwnode, mcp9600_alert_name[i]); | |
| if (irq <= 0) | |
| continue; | |
| val = 0; | |
| irq_type = irq_get_trigger_type(irq); | |
| if (irq_type == IRQ_TYPE_EDGE_RISING) | |
| val |= MCP9600_ALERT_CFG_ACTIVE_HIGH; | |
| if (i == MCP9600_ALERT2 || i == MCP9600_ALERT4) | |
| val |= MCP9600_ALERT_CFG_FALLING; | |
| if (i == MCP9600_ALERT3 || i == MCP9600_ALERT4) | |
| val |= MCP9600_ALERT_CFG_COLD_JUNCTION; | |
| ret = i2c_smbus_write_byte_data(client, | |
| MCP9600_ALERT_CFG(i + 1), | |
| val); | |
| if (ret < 0) | |
| return ret; | |
| ret = devm_request_threaded_irq(dev, irq, NULL, | |
| mcp9600_alert_handler_func[i], | |
| IRQF_ONESHOT, "mcp9600", | |
| indio_dev); | |
| if (ret) | |
| return ret; | |
| ch_sel |= BIT(i); | |
| } | |
| return ch_sel; | |
| } | |
| static int mcp9600_probe(struct i2c_client *client) | |
| { | |
| struct iio_dev *indio_dev; | |
| struct mcp9600_data *data; | |
| int ret, ch_sel; | |
| ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID); | |
| if (ret < 0) | |
| return dev_err_probe(&client->dev, ret, "Failed to read device ID\n"); | |
| if (ret != MCP9600_DEVICE_ID_MCP9600) | |
| dev_warn(&client->dev, "Expected ID %x, got %x\n", | |
| MCP9600_DEVICE_ID_MCP9600, ret); | |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| data = iio_priv(indio_dev); | |
| data->client = client; | |
| ch_sel = mcp9600_probe_alerts(indio_dev); | |
| if (ch_sel < 0) | |
| return ch_sel; | |
| indio_dev->info = &mcp9600_info; | |
| indio_dev->name = "mcp9600"; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| indio_dev->channels = mcp9600_channels[ch_sel]; | |
| indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels[ch_sel]); | |
| return devm_iio_device_register(&client->dev, indio_dev); | |
| } | |
| static const struct i2c_device_id mcp9600_id[] = { | |
| { "mcp9600" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, mcp9600_id); | |
| static const struct of_device_id mcp9600_of_match[] = { | |
| { .compatible = "microchip,mcp9600" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, mcp9600_of_match); | |
| static struct i2c_driver mcp9600_driver = { | |
| .driver = { | |
| .name = "mcp9600", | |
| .of_match_table = mcp9600_of_match, | |
| }, | |
| .probe = mcp9600_probe, | |
| .id_table = mcp9600_id | |
| }; | |
| module_i2c_driver(mcp9600_driver); | |
| MODULE_AUTHOR("Dimitri Fedrau <dima.fedrau@gmail.com>"); | |
| MODULE_AUTHOR("Andrew Hepp <andrew.hepp@ahepp.dev>"); | |
| MODULE_DESCRIPTION("Microchip MCP9600 thermocouple EMF converter driver"); | |
| MODULE_LICENSE("GPL"); |