| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Linux on zSeries Channel Measurement Facility support | |
| * | |
| * Copyright IBM Corp. 2000, 2006 | |
| * | |
| * Authors: Arnd Bergmann <arndb@de.ibm.com> | |
| * Cornelia Huck <cornelia.huck@de.ibm.com> | |
| * | |
| * original idea from Natarajan Krishnaswami <nkrishna@us.ibm.com> | |
| */ | |
| #define KMSG_COMPONENT "cio" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/memblock.h> | |
| #include <linux/device.h> | |
| #include <linux/init.h> | |
| #include <linux/list.h> | |
| #include <linux/export.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/slab.h> | |
| #include <linux/timex.h> /* get_tod_clock() */ | |
| #include <asm/ccwdev.h> | |
| #include <asm/cio.h> | |
| #include <asm/cmb.h> | |
| #include <asm/div64.h> | |
| #include "cio.h" | |
| #include "css.h" | |
| #include "device.h" | |
| #include "ioasm.h" | |
| #include "chsc.h" | |
| /* | |
| * parameter to enable cmf during boot, possible uses are: | |
| * "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be | |
| * used on any subchannel | |
| * "s390cmf=<num>" -- enable cmf and allocate enough memory to measure | |
| * <num> subchannel, where <num> is an integer | |
| * between 1 and 65535, default is 1024 | |
| */ | |
| #define ARGSTRING "s390cmf" | |
| /* indices for READCMB */ | |
| enum cmb_index { | |
| avg_utilization = -1, | |
| /* basic and exended format: */ | |
| cmb_ssch_rsch_count = 0, | |
| cmb_sample_count, | |
| cmb_device_connect_time, | |
| cmb_function_pending_time, | |
| cmb_device_disconnect_time, | |
| cmb_control_unit_queuing_time, | |
| cmb_device_active_only_time, | |
| /* extended format only: */ | |
| cmb_device_busy_time, | |
| cmb_initial_command_response_time, | |
| }; | |
| /** | |
| * enum cmb_format - types of supported measurement block formats | |
| * | |
| * @CMF_BASIC: traditional channel measurement blocks supported | |
| * by all machines that we run on | |
| * @CMF_EXTENDED: improved format that was introduced with the z990 | |
| * machine | |
| * @CMF_AUTODETECT: default: use extended format when running on a machine | |
| * supporting extended format, otherwise fall back to | |
| * basic format | |
| */ | |
| enum cmb_format { | |
| CMF_BASIC, | |
| CMF_EXTENDED, | |
| CMF_AUTODETECT = -1, | |
| }; | |
| /* | |
| * format - actual format for all measurement blocks | |
| * | |
| * The format module parameter can be set to a value of 0 (zero) | |
| * or 1, indicating basic or extended format as described for | |
| * enum cmb_format. | |
| */ | |
| static int format = CMF_AUTODETECT; | |
| module_param(format, bint, 0444); | |
| /** | |
| * struct cmb_operations - functions to use depending on cmb_format | |
| * | |
| * Most of these functions operate on a struct ccw_device. There is only | |
| * one instance of struct cmb_operations because the format of the measurement | |
| * data is guaranteed to be the same for every ccw_device. | |
| * | |
| * @alloc: allocate memory for a channel measurement block, | |
| * either with the help of a special pool or with kmalloc | |
| * @free: free memory allocated with @alloc | |
| * @set: enable or disable measurement | |
| * @read: read a measurement entry at an index | |
| * @readall: read a measurement block in a common format | |
| * @reset: clear the data in the associated measurement block and | |
| * reset its time stamp | |
| */ | |
| struct cmb_operations { | |
| int (*alloc) (struct ccw_device *); | |
| void (*free) (struct ccw_device *); | |
| int (*set) (struct ccw_device *, u32); | |
| u64 (*read) (struct ccw_device *, int); | |
| int (*readall)(struct ccw_device *, struct cmbdata *); | |
| void (*reset) (struct ccw_device *); | |
| /* private: */ | |
| struct attribute_group *attr_group; | |
| }; | |
| static struct cmb_operations *cmbops; | |
| struct cmb_data { | |
| void *hw_block; /* Pointer to block updated by hardware */ | |
| void *last_block; /* Last changed block copied from hardware block */ | |
| int size; /* Size of hw_block and last_block */ | |
| unsigned long long last_update; /* when last_block was updated */ | |
| }; | |
| /* | |
| * Our user interface is designed in terms of nanoseconds, | |
| * while the hardware measures total times in its own | |
| * unit. | |
| */ | |
| static inline u64 time_to_nsec(u32 value) | |
| { | |
| return ((u64)value) * 128000ull; | |
| } | |
| /* | |
| * Users are usually interested in average times, | |
| * not accumulated time. | |
| * This also helps us with atomicity problems | |
| * when reading sinlge values. | |
| */ | |
| static inline u64 time_to_avg_nsec(u32 value, u32 count) | |
| { | |
| u64 ret; | |
| /* no samples yet, avoid division by 0 */ | |
| if (count == 0) | |
| return 0; | |
| /* value comes in units of 128 µsec */ | |
| ret = time_to_nsec(value); | |
| do_div(ret, count); | |
| return ret; | |
| } | |
| #define CMF_OFF 0 | |
| #define CMF_ON 2 | |
| /* | |
| * Activate or deactivate the channel monitor. When area is NULL, | |
| * the monitor is deactivated. The channel monitor needs to | |
| * be active in order to measure subchannels, which also need | |
| * to be enabled. | |
| */ | |
| static inline void cmf_activate(void *area, unsigned int onoff) | |
| { | |
| /* activate channel measurement */ | |
| asm volatile( | |
| " lgr 1,%[r1]\n" | |
| " lgr 2,%[mbo]\n" | |
| " schm\n" | |
| : | |
| : [r1] "d" ((unsigned long)onoff), | |
| [mbo] "d" (virt_to_phys(area)) | |
| : "1", "2"); | |
| } | |
| static int set_schib(struct ccw_device *cdev, u32 mme, int mbfc, | |
| unsigned long address) | |
| { | |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); | |
| int ret; | |
| sch->config.mme = mme; | |
| sch->config.mbfc = mbfc; | |
| /* address can be either a block address or a block index */ | |
| if (mbfc) | |
| sch->config.mba = address; | |
| else | |
| sch->config.mbi = address; | |
| ret = cio_commit_config(sch); | |
| if (!mme && ret == -ENODEV) { | |
| /* | |
| * The task was to disable measurement block updates but | |
| * the subchannel is already gone. Report success. | |
| */ | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| struct set_schib_struct { | |
| u32 mme; | |
| int mbfc; | |
| unsigned long address; | |
| wait_queue_head_t wait; | |
| int ret; | |
| }; | |
| #define CMF_PENDING 1 | |
| #define SET_SCHIB_TIMEOUT (10 * HZ) | |
| static int set_schib_wait(struct ccw_device *cdev, u32 mme, | |
| int mbfc, unsigned long address) | |
| { | |
| struct set_schib_struct set_data; | |
| int ret = -ENODEV; | |
| spin_lock_irq(cdev->ccwlock); | |
| if (!cdev->private->cmb) | |
| goto out; | |
| ret = set_schib(cdev, mme, mbfc, address); | |
| if (ret != -EBUSY) | |
| goto out; | |
| /* if the device is not online, don't even try again */ | |
| if (cdev->private->state != DEV_STATE_ONLINE) | |
| goto out; | |
| init_waitqueue_head(&set_data.wait); | |
| set_data.mme = mme; | |
| set_data.mbfc = mbfc; | |
| set_data.address = address; | |
| set_data.ret = CMF_PENDING; | |
| cdev->private->state = DEV_STATE_CMFCHANGE; | |
| cdev->private->cmb_wait = &set_data; | |
| spin_unlock_irq(cdev->ccwlock); | |
| ret = wait_event_interruptible_timeout(set_data.wait, | |
| set_data.ret != CMF_PENDING, | |
| SET_SCHIB_TIMEOUT); | |
| spin_lock_irq(cdev->ccwlock); | |
| if (ret <= 0) { | |
| if (set_data.ret == CMF_PENDING) { | |
| set_data.ret = (ret == 0) ? -ETIME : ret; | |
| if (cdev->private->state == DEV_STATE_CMFCHANGE) | |
| cdev->private->state = DEV_STATE_ONLINE; | |
| } | |
| } | |
| cdev->private->cmb_wait = NULL; | |
| ret = set_data.ret; | |
| out: | |
| spin_unlock_irq(cdev->ccwlock); | |
| return ret; | |
| } | |
| void retry_set_schib(struct ccw_device *cdev) | |
| { | |
| struct set_schib_struct *set_data = cdev->private->cmb_wait; | |
| if (!set_data) | |
| return; | |
| set_data->ret = set_schib(cdev, set_data->mme, set_data->mbfc, | |
| set_data->address); | |
| wake_up(&set_data->wait); | |
| } | |
| static int cmf_copy_block(struct ccw_device *cdev) | |
| { | |
| struct subchannel *sch = to_subchannel(cdev->dev.parent); | |
| struct cmb_data *cmb_data; | |
| void *hw_block; | |
| if (cio_update_schib(sch)) | |
| return -ENODEV; | |
| if (scsw_fctl(&sch->schib.scsw) & SCSW_FCTL_START_FUNC) { | |
| /* Don't copy if a start function is in progress. */ | |
| if ((!(scsw_actl(&sch->schib.scsw) & SCSW_ACTL_SUSPENDED)) && | |
| (scsw_actl(&sch->schib.scsw) & | |
| (SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)) && | |
| (!(scsw_stctl(&sch->schib.scsw) & SCSW_STCTL_SEC_STATUS))) | |
| return -EBUSY; | |
| } | |
| cmb_data = cdev->private->cmb; | |
| hw_block = cmb_data->hw_block; | |
| memcpy(cmb_data->last_block, hw_block, cmb_data->size); | |
| cmb_data->last_update = get_tod_clock(); | |
| return 0; | |
| } | |
| struct copy_block_struct { | |
| wait_queue_head_t wait; | |
| int ret; | |
| }; | |
| static int cmf_cmb_copy_wait(struct ccw_device *cdev) | |
| { | |
| struct copy_block_struct copy_block; | |
| int ret = -ENODEV; | |
| spin_lock_irq(cdev->ccwlock); | |
| if (!cdev->private->cmb) | |
| goto out; | |
| ret = cmf_copy_block(cdev); | |
| if (ret != -EBUSY) | |
| goto out; | |
| if (cdev->private->state != DEV_STATE_ONLINE) | |
| goto out; | |
| init_waitqueue_head(©_block.wait); | |
| copy_block.ret = CMF_PENDING; | |
| cdev->private->state = DEV_STATE_CMFUPDATE; | |
| cdev->private->cmb_wait = ©_block; | |
| spin_unlock_irq(cdev->ccwlock); | |
| ret = wait_event_interruptible(copy_block.wait, | |
| copy_block.ret != CMF_PENDING); | |
| spin_lock_irq(cdev->ccwlock); | |
| if (ret) { | |
| if (copy_block.ret == CMF_PENDING) { | |
| copy_block.ret = -ERESTARTSYS; | |
| if (cdev->private->state == DEV_STATE_CMFUPDATE) | |
| cdev->private->state = DEV_STATE_ONLINE; | |
| } | |
| } | |
| cdev->private->cmb_wait = NULL; | |
| ret = copy_block.ret; | |
| out: | |
| spin_unlock_irq(cdev->ccwlock); | |
| return ret; | |
| } | |
| void cmf_retry_copy_block(struct ccw_device *cdev) | |
| { | |
| struct copy_block_struct *copy_block = cdev->private->cmb_wait; | |
| if (!copy_block) | |
| return; | |
| copy_block->ret = cmf_copy_block(cdev); | |
| wake_up(©_block->wait); | |
| } | |
| static void cmf_generic_reset(struct ccw_device *cdev) | |
| { | |
| struct cmb_data *cmb_data; | |
| spin_lock_irq(cdev->ccwlock); | |
| cmb_data = cdev->private->cmb; | |
| if (cmb_data) { | |
| memset(cmb_data->last_block, 0, cmb_data->size); | |
| /* | |
| * Need to reset hw block as well to make the hardware start | |
| * from 0 again. | |
| */ | |
| memset(cmb_data->hw_block, 0, cmb_data->size); | |
| cmb_data->last_update = 0; | |
| } | |
| cdev->private->cmb_start_time = get_tod_clock(); | |
| spin_unlock_irq(cdev->ccwlock); | |
| } | |
| /** | |
| * struct cmb_area - container for global cmb data | |
| * | |
| * @mem: pointer to CMBs (only in basic measurement mode) | |
| * @list: contains a linked list of all subchannels | |
| * @num_channels: number of channels to be measured | |
| * @lock: protect concurrent access to @mem and @list | |
| */ | |
| struct cmb_area { | |
| struct cmb *mem; | |
| struct list_head list; | |
| int num_channels; | |
| spinlock_t lock; | |
| }; | |
| static struct cmb_area cmb_area = { | |
| .lock = __SPIN_LOCK_UNLOCKED(cmb_area.lock), | |
| .list = LIST_HEAD_INIT(cmb_area.list), | |
| .num_channels = 1024, | |
| }; | |
| /* ****** old style CMB handling ********/ | |
| /* | |
| * Basic channel measurement blocks are allocated in one contiguous | |
| * block of memory, which can not be moved as long as any channel | |
| * is active. Therefore, a maximum number of subchannels needs to | |
| * be defined somewhere. This is a module parameter, defaulting to | |
| * a reasonable value of 1024, or 32 kb of memory. | |
| * Current kernels don't allow kmalloc with more than 128kb, so the | |
| * maximum is 4096. | |
| */ | |
| module_param_named(maxchannels, cmb_area.num_channels, uint, 0444); | |
| /** | |
| * struct cmb - basic channel measurement block | |
| * @ssch_rsch_count: number of ssch and rsch | |
| * @sample_count: number of samples | |
| * @device_connect_time: time of device connect | |
| * @function_pending_time: time of function pending | |
| * @device_disconnect_time: time of device disconnect | |
| * @control_unit_queuing_time: time of control unit queuing | |
| * @device_active_only_time: time of device active only | |
| * @reserved: unused in basic measurement mode | |
| * | |
| * The measurement block as used by the hardware. The fields are described | |
| * further in z/Architecture Principles of Operation, chapter 17. | |
| * | |
| * The cmb area made up from these blocks must be a contiguous array and may | |
| * not be reallocated or freed. | |
| * Only one cmb area can be present in the system. | |
| */ | |
| struct cmb { | |
| u16 ssch_rsch_count; | |
| u16 sample_count; | |
| u32 device_connect_time; | |
| u32 function_pending_time; | |
| u32 device_disconnect_time; | |
| u32 control_unit_queuing_time; | |
| u32 device_active_only_time; | |
| u32 reserved[2]; | |
| }; | |
| /* | |
| * Insert a single device into the cmb_area list. | |
| * Called with cmb_area.lock held from alloc_cmb. | |
| */ | |
| static int alloc_cmb_single(struct ccw_device *cdev, | |
| struct cmb_data *cmb_data) | |
| { | |
| struct cmb *cmb; | |
| struct ccw_device_private *node; | |
| int ret; | |
| spin_lock_irq(cdev->ccwlock); | |
| if (!list_empty(&cdev->private->cmb_list)) { | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| /* | |
| * Find first unused cmb in cmb_area.mem. | |
| * This is a little tricky: cmb_area.list | |
| * remains sorted by ->cmb->hw_data pointers. | |
| */ | |
| cmb = cmb_area.mem; | |
| list_for_each_entry(node, &cmb_area.list, cmb_list) { | |
| struct cmb_data *data; | |
| data = node->cmb; | |
| if ((struct cmb*)data->hw_block > cmb) | |
| break; | |
| cmb++; | |
| } | |
| if (cmb - cmb_area.mem >= cmb_area.num_channels) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| /* insert new cmb */ | |
| list_add_tail(&cdev->private->cmb_list, &node->cmb_list); | |
| cmb_data->hw_block = cmb; | |
| cdev->private->cmb = cmb_data; | |
| ret = 0; | |
| out: | |
| spin_unlock_irq(cdev->ccwlock); | |
| return ret; | |
| } | |
| static int alloc_cmb(struct ccw_device *cdev) | |
| { | |
| int ret; | |
| struct cmb *mem; | |
| ssize_t size; | |
| struct cmb_data *cmb_data; | |
| /* Allocate private cmb_data. */ | |
| cmb_data = kzalloc(sizeof(struct cmb_data), GFP_KERNEL); | |
| if (!cmb_data) | |
| return -ENOMEM; | |
| cmb_data->last_block = kzalloc(sizeof(struct cmb), GFP_KERNEL); | |
| if (!cmb_data->last_block) { | |
| kfree(cmb_data); | |
| return -ENOMEM; | |
| } | |
| cmb_data->size = sizeof(struct cmb); | |
| spin_lock(&cmb_area.lock); | |
| if (!cmb_area.mem) { | |
| /* there is no user yet, so we need a new area */ | |
| size = sizeof(struct cmb) * cmb_area.num_channels; | |
| WARN_ON(!list_empty(&cmb_area.list)); | |
| spin_unlock(&cmb_area.lock); | |
| mem = (void *)__get_free_pages(GFP_KERNEL, get_order(size)); | |
| spin_lock(&cmb_area.lock); | |
| if (cmb_area.mem) { | |
| /* ok, another thread was faster */ | |
| free_pages((unsigned long)mem, get_order(size)); | |
| } else if (!mem) { | |
| /* no luck */ | |
| ret = -ENOMEM; | |
| goto out; | |
| } else { | |
| /* everything ok */ | |
| memset(mem, 0, size); | |
| cmb_area.mem = mem; | |
| cmf_activate(cmb_area.mem, CMF_ON); | |
| } | |
| } | |
| /* do the actual allocation */ | |
| ret = alloc_cmb_single(cdev, cmb_data); | |
| out: | |
| spin_unlock(&cmb_area.lock); | |
| if (ret) { | |
| kfree(cmb_data->last_block); | |
| kfree(cmb_data); | |
| } | |
| return ret; | |
| } | |
| static void free_cmb(struct ccw_device *cdev) | |
| { | |
| struct ccw_device_private *priv; | |
| struct cmb_data *cmb_data; | |
| spin_lock(&cmb_area.lock); | |
| spin_lock_irq(cdev->ccwlock); | |
| priv = cdev->private; | |
| cmb_data = priv->cmb; | |
| priv->cmb = NULL; | |
| if (cmb_data) | |
| kfree(cmb_data->last_block); | |
| kfree(cmb_data); | |
| list_del_init(&priv->cmb_list); | |
| if (list_empty(&cmb_area.list)) { | |
| ssize_t size; | |
| size = sizeof(struct cmb) * cmb_area.num_channels; | |
| cmf_activate(NULL, CMF_OFF); | |
| free_pages((unsigned long)cmb_area.mem, get_order(size)); | |
| cmb_area.mem = NULL; | |
| } | |
| spin_unlock_irq(cdev->ccwlock); | |
| spin_unlock(&cmb_area.lock); | |
| } | |
| static int set_cmb(struct ccw_device *cdev, u32 mme) | |
| { | |
| u16 offset; | |
| struct cmb_data *cmb_data; | |
| unsigned long flags; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| if (!cdev->private->cmb) { | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return -EINVAL; | |
| } | |
| cmb_data = cdev->private->cmb; | |
| offset = mme ? (struct cmb *)cmb_data->hw_block - cmb_area.mem : 0; | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return set_schib_wait(cdev, mme, 0, offset); | |
| } | |
| /* calculate utilization in 0.1 percent units */ | |
| static u64 __cmb_utilization(u64 device_connect_time, u64 function_pending_time, | |
| u64 device_disconnect_time, u64 start_time) | |
| { | |
| u64 utilization, elapsed_time; | |
| utilization = time_to_nsec(device_connect_time + | |
| function_pending_time + | |
| device_disconnect_time); | |
| elapsed_time = get_tod_clock() - start_time; | |
| elapsed_time = tod_to_ns(elapsed_time); | |
| elapsed_time /= 1000; | |
| return elapsed_time ? (utilization / elapsed_time) : 0; | |
| } | |
| static u64 read_cmb(struct ccw_device *cdev, int index) | |
| { | |
| struct cmb_data *cmb_data; | |
| unsigned long flags; | |
| struct cmb *cmb; | |
| u64 ret = 0; | |
| u32 val; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| cmb_data = cdev->private->cmb; | |
| if (!cmb_data) | |
| goto out; | |
| cmb = cmb_data->hw_block; | |
| switch (index) { | |
| case avg_utilization: | |
| ret = __cmb_utilization(cmb->device_connect_time, | |
| cmb->function_pending_time, | |
| cmb->device_disconnect_time, | |
| cdev->private->cmb_start_time); | |
| goto out; | |
| case cmb_ssch_rsch_count: | |
| ret = cmb->ssch_rsch_count; | |
| goto out; | |
| case cmb_sample_count: | |
| ret = cmb->sample_count; | |
| goto out; | |
| case cmb_device_connect_time: | |
| val = cmb->device_connect_time; | |
| break; | |
| case cmb_function_pending_time: | |
| val = cmb->function_pending_time; | |
| break; | |
| case cmb_device_disconnect_time: | |
| val = cmb->device_disconnect_time; | |
| break; | |
| case cmb_control_unit_queuing_time: | |
| val = cmb->control_unit_queuing_time; | |
| break; | |
| case cmb_device_active_only_time: | |
| val = cmb->device_active_only_time; | |
| break; | |
| default: | |
| goto out; | |
| } | |
| ret = time_to_avg_nsec(val, cmb->sample_count); | |
| out: | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return ret; | |
| } | |
| static int readall_cmb(struct ccw_device *cdev, struct cmbdata *data) | |
| { | |
| struct cmb *cmb; | |
| struct cmb_data *cmb_data; | |
| u64 time; | |
| unsigned long flags; | |
| int ret; | |
| ret = cmf_cmb_copy_wait(cdev); | |
| if (ret < 0) | |
| return ret; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| cmb_data = cdev->private->cmb; | |
| if (!cmb_data) { | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (cmb_data->last_update == 0) { | |
| ret = -EAGAIN; | |
| goto out; | |
| } | |
| cmb = cmb_data->last_block; | |
| time = cmb_data->last_update - cdev->private->cmb_start_time; | |
| memset(data, 0, sizeof(struct cmbdata)); | |
| /* we only know values before device_busy_time */ | |
| data->size = offsetof(struct cmbdata, device_busy_time); | |
| data->elapsed_time = tod_to_ns(time); | |
| /* copy data to new structure */ | |
| data->ssch_rsch_count = cmb->ssch_rsch_count; | |
| data->sample_count = cmb->sample_count; | |
| /* time fields are converted to nanoseconds while copying */ | |
| data->device_connect_time = time_to_nsec(cmb->device_connect_time); | |
| data->function_pending_time = time_to_nsec(cmb->function_pending_time); | |
| data->device_disconnect_time = | |
| time_to_nsec(cmb->device_disconnect_time); | |
| data->control_unit_queuing_time | |
| = time_to_nsec(cmb->control_unit_queuing_time); | |
| data->device_active_only_time | |
| = time_to_nsec(cmb->device_active_only_time); | |
| ret = 0; | |
| out: | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return ret; | |
| } | |
| static void reset_cmb(struct ccw_device *cdev) | |
| { | |
| cmf_generic_reset(cdev); | |
| } | |
| static int cmf_enabled(struct ccw_device *cdev) | |
| { | |
| int enabled; | |
| spin_lock_irq(cdev->ccwlock); | |
| enabled = !!cdev->private->cmb; | |
| spin_unlock_irq(cdev->ccwlock); | |
| return enabled; | |
| } | |
| static struct attribute_group cmf_attr_group; | |
| static struct cmb_operations cmbops_basic = { | |
| .alloc = alloc_cmb, | |
| .free = free_cmb, | |
| .set = set_cmb, | |
| .read = read_cmb, | |
| .readall = readall_cmb, | |
| .reset = reset_cmb, | |
| .attr_group = &cmf_attr_group, | |
| }; | |
| /* ******** extended cmb handling ********/ | |
| /** | |
| * struct cmbe - extended channel measurement block | |
| * @ssch_rsch_count: number of ssch and rsch | |
| * @sample_count: number of samples | |
| * @device_connect_time: time of device connect | |
| * @function_pending_time: time of function pending | |
| * @device_disconnect_time: time of device disconnect | |
| * @control_unit_queuing_time: time of control unit queuing | |
| * @device_active_only_time: time of device active only | |
| * @device_busy_time: time of device busy | |
| * @initial_command_response_time: initial command response time | |
| * @reserved: unused | |
| * | |
| * The measurement block as used by the hardware. May be in any 64 bit physical | |
| * location. | |
| * The fields are described further in z/Architecture Principles of Operation, | |
| * third edition, chapter 17. | |
| */ | |
| struct cmbe { | |
| u32 ssch_rsch_count; | |
| u32 sample_count; | |
| u32 device_connect_time; | |
| u32 function_pending_time; | |
| u32 device_disconnect_time; | |
| u32 control_unit_queuing_time; | |
| u32 device_active_only_time; | |
| u32 device_busy_time; | |
| u32 initial_command_response_time; | |
| u32 reserved[7]; | |
| } __packed __aligned(64); | |
| static struct kmem_cache *cmbe_cache; | |
| static int alloc_cmbe(struct ccw_device *cdev) | |
| { | |
| struct cmb_data *cmb_data; | |
| struct cmbe *cmbe; | |
| int ret = -ENOMEM; | |
| cmbe = kmem_cache_zalloc(cmbe_cache, GFP_KERNEL); | |
| if (!cmbe) | |
| return ret; | |
| cmb_data = kzalloc(sizeof(*cmb_data), GFP_KERNEL); | |
| if (!cmb_data) | |
| goto out_free; | |
| cmb_data->last_block = kzalloc(sizeof(struct cmbe), GFP_KERNEL); | |
| if (!cmb_data->last_block) | |
| goto out_free; | |
| cmb_data->size = sizeof(*cmbe); | |
| cmb_data->hw_block = cmbe; | |
| spin_lock(&cmb_area.lock); | |
| spin_lock_irq(cdev->ccwlock); | |
| if (cdev->private->cmb) | |
| goto out_unlock; | |
| cdev->private->cmb = cmb_data; | |
| /* activate global measurement if this is the first channel */ | |
| if (list_empty(&cmb_area.list)) | |
| cmf_activate(NULL, CMF_ON); | |
| list_add_tail(&cdev->private->cmb_list, &cmb_area.list); | |
| spin_unlock_irq(cdev->ccwlock); | |
| spin_unlock(&cmb_area.lock); | |
| return 0; | |
| out_unlock: | |
| spin_unlock_irq(cdev->ccwlock); | |
| spin_unlock(&cmb_area.lock); | |
| ret = -EBUSY; | |
| out_free: | |
| if (cmb_data) | |
| kfree(cmb_data->last_block); | |
| kfree(cmb_data); | |
| kmem_cache_free(cmbe_cache, cmbe); | |
| return ret; | |
| } | |
| static void free_cmbe(struct ccw_device *cdev) | |
| { | |
| struct cmb_data *cmb_data; | |
| spin_lock(&cmb_area.lock); | |
| spin_lock_irq(cdev->ccwlock); | |
| cmb_data = cdev->private->cmb; | |
| cdev->private->cmb = NULL; | |
| if (cmb_data) { | |
| kfree(cmb_data->last_block); | |
| kmem_cache_free(cmbe_cache, cmb_data->hw_block); | |
| } | |
| kfree(cmb_data); | |
| /* deactivate global measurement if this is the last channel */ | |
| list_del_init(&cdev->private->cmb_list); | |
| if (list_empty(&cmb_area.list)) | |
| cmf_activate(NULL, CMF_OFF); | |
| spin_unlock_irq(cdev->ccwlock); | |
| spin_unlock(&cmb_area.lock); | |
| } | |
| static int set_cmbe(struct ccw_device *cdev, u32 mme) | |
| { | |
| unsigned long mba; | |
| struct cmb_data *cmb_data; | |
| unsigned long flags; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| if (!cdev->private->cmb) { | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return -EINVAL; | |
| } | |
| cmb_data = cdev->private->cmb; | |
| mba = mme ? (unsigned long) cmb_data->hw_block : 0; | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return set_schib_wait(cdev, mme, 1, mba); | |
| } | |
| static u64 read_cmbe(struct ccw_device *cdev, int index) | |
| { | |
| struct cmb_data *cmb_data; | |
| unsigned long flags; | |
| struct cmbe *cmb; | |
| u64 ret = 0; | |
| u32 val; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| cmb_data = cdev->private->cmb; | |
| if (!cmb_data) | |
| goto out; | |
| cmb = cmb_data->hw_block; | |
| switch (index) { | |
| case avg_utilization: | |
| ret = __cmb_utilization(cmb->device_connect_time, | |
| cmb->function_pending_time, | |
| cmb->device_disconnect_time, | |
| cdev->private->cmb_start_time); | |
| goto out; | |
| case cmb_ssch_rsch_count: | |
| ret = cmb->ssch_rsch_count; | |
| goto out; | |
| case cmb_sample_count: | |
| ret = cmb->sample_count; | |
| goto out; | |
| case cmb_device_connect_time: | |
| val = cmb->device_connect_time; | |
| break; | |
| case cmb_function_pending_time: | |
| val = cmb->function_pending_time; | |
| break; | |
| case cmb_device_disconnect_time: | |
| val = cmb->device_disconnect_time; | |
| break; | |
| case cmb_control_unit_queuing_time: | |
| val = cmb->control_unit_queuing_time; | |
| break; | |
| case cmb_device_active_only_time: | |
| val = cmb->device_active_only_time; | |
| break; | |
| case cmb_device_busy_time: | |
| val = cmb->device_busy_time; | |
| break; | |
| case cmb_initial_command_response_time: | |
| val = cmb->initial_command_response_time; | |
| break; | |
| default: | |
| goto out; | |
| } | |
| ret = time_to_avg_nsec(val, cmb->sample_count); | |
| out: | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return ret; | |
| } | |
| static int readall_cmbe(struct ccw_device *cdev, struct cmbdata *data) | |
| { | |
| struct cmbe *cmb; | |
| struct cmb_data *cmb_data; | |
| u64 time; | |
| unsigned long flags; | |
| int ret; | |
| ret = cmf_cmb_copy_wait(cdev); | |
| if (ret < 0) | |
| return ret; | |
| spin_lock_irqsave(cdev->ccwlock, flags); | |
| cmb_data = cdev->private->cmb; | |
| if (!cmb_data) { | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (cmb_data->last_update == 0) { | |
| ret = -EAGAIN; | |
| goto out; | |
| } | |
| time = cmb_data->last_update - cdev->private->cmb_start_time; | |
| memset (data, 0, sizeof(struct cmbdata)); | |
| /* we only know values before device_busy_time */ | |
| data->size = offsetof(struct cmbdata, device_busy_time); | |
| data->elapsed_time = tod_to_ns(time); | |
| cmb = cmb_data->last_block; | |
| /* copy data to new structure */ | |
| data->ssch_rsch_count = cmb->ssch_rsch_count; | |
| data->sample_count = cmb->sample_count; | |
| /* time fields are converted to nanoseconds while copying */ | |
| data->device_connect_time = time_to_nsec(cmb->device_connect_time); | |
| data->function_pending_time = time_to_nsec(cmb->function_pending_time); | |
| data->device_disconnect_time = | |
| time_to_nsec(cmb->device_disconnect_time); | |
| data->control_unit_queuing_time | |
| = time_to_nsec(cmb->control_unit_queuing_time); | |
| data->device_active_only_time | |
| = time_to_nsec(cmb->device_active_only_time); | |
| data->device_busy_time = time_to_nsec(cmb->device_busy_time); | |
| data->initial_command_response_time | |
| = time_to_nsec(cmb->initial_command_response_time); | |
| ret = 0; | |
| out: | |
| spin_unlock_irqrestore(cdev->ccwlock, flags); | |
| return ret; | |
| } | |
| static void reset_cmbe(struct ccw_device *cdev) | |
| { | |
| cmf_generic_reset(cdev); | |
| } | |
| static struct attribute_group cmf_attr_group_ext; | |
| static struct cmb_operations cmbops_extended = { | |
| .alloc = alloc_cmbe, | |
| .free = free_cmbe, | |
| .set = set_cmbe, | |
| .read = read_cmbe, | |
| .readall = readall_cmbe, | |
| .reset = reset_cmbe, | |
| .attr_group = &cmf_attr_group_ext, | |
| }; | |
| static ssize_t cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx) | |
| { | |
| return sprintf(buf, "%lld\n", | |
| (unsigned long long) cmf_read(to_ccwdev(dev), idx)); | |
| } | |
| static ssize_t cmb_show_avg_sample_interval(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct ccw_device *cdev = to_ccwdev(dev); | |
| unsigned long count; | |
| long interval; | |
| count = cmf_read(cdev, cmb_sample_count); | |
| spin_lock_irq(cdev->ccwlock); | |
| if (count) { | |
| interval = get_tod_clock() - cdev->private->cmb_start_time; | |
| interval = tod_to_ns(interval); | |
| interval /= count; | |
| } else | |
| interval = -1; | |
| spin_unlock_irq(cdev->ccwlock); | |
| return sprintf(buf, "%ld\n", interval); | |
| } | |
| static ssize_t cmb_show_avg_utilization(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| unsigned long u = cmf_read(to_ccwdev(dev), avg_utilization); | |
| return sprintf(buf, "%02lu.%01lu%%\n", u / 10, u % 10); | |
| } | |
| #define cmf_attr(name) \ | |
| static ssize_t show_##name(struct device *dev, \ | |
| struct device_attribute *attr, char *buf) \ | |
| { return cmb_show_attr((dev), buf, cmb_##name); } \ | |
| static DEVICE_ATTR(name, 0444, show_##name, NULL); | |
| #define cmf_attr_avg(name) \ | |
| static ssize_t show_avg_##name(struct device *dev, \ | |
| struct device_attribute *attr, char *buf) \ | |
| { return cmb_show_attr((dev), buf, cmb_##name); } \ | |
| static DEVICE_ATTR(avg_##name, 0444, show_avg_##name, NULL); | |
| cmf_attr(ssch_rsch_count); | |
| cmf_attr(sample_count); | |
| cmf_attr_avg(device_connect_time); | |
| cmf_attr_avg(function_pending_time); | |
| cmf_attr_avg(device_disconnect_time); | |
| cmf_attr_avg(control_unit_queuing_time); | |
| cmf_attr_avg(device_active_only_time); | |
| cmf_attr_avg(device_busy_time); | |
| cmf_attr_avg(initial_command_response_time); | |
| static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval, | |
| NULL); | |
| static DEVICE_ATTR(avg_utilization, 0444, cmb_show_avg_utilization, NULL); | |
| static struct attribute *cmf_attributes[] = { | |
| &dev_attr_avg_sample_interval.attr, | |
| &dev_attr_avg_utilization.attr, | |
| &dev_attr_ssch_rsch_count.attr, | |
| &dev_attr_sample_count.attr, | |
| &dev_attr_avg_device_connect_time.attr, | |
| &dev_attr_avg_function_pending_time.attr, | |
| &dev_attr_avg_device_disconnect_time.attr, | |
| &dev_attr_avg_control_unit_queuing_time.attr, | |
| &dev_attr_avg_device_active_only_time.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cmf_attr_group = { | |
| .name = "cmf", | |
| .attrs = cmf_attributes, | |
| }; | |
| static struct attribute *cmf_attributes_ext[] = { | |
| &dev_attr_avg_sample_interval.attr, | |
| &dev_attr_avg_utilization.attr, | |
| &dev_attr_ssch_rsch_count.attr, | |
| &dev_attr_sample_count.attr, | |
| &dev_attr_avg_device_connect_time.attr, | |
| &dev_attr_avg_function_pending_time.attr, | |
| &dev_attr_avg_device_disconnect_time.attr, | |
| &dev_attr_avg_control_unit_queuing_time.attr, | |
| &dev_attr_avg_device_active_only_time.attr, | |
| &dev_attr_avg_device_busy_time.attr, | |
| &dev_attr_avg_initial_command_response_time.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cmf_attr_group_ext = { | |
| .name = "cmf", | |
| .attrs = cmf_attributes_ext, | |
| }; | |
| static ssize_t cmb_enable_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct ccw_device *cdev = to_ccwdev(dev); | |
| return sprintf(buf, "%d\n", cmf_enabled(cdev)); | |
| } | |
| static ssize_t cmb_enable_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, | |
| size_t c) | |
| { | |
| struct ccw_device *cdev = to_ccwdev(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 16, &val); | |
| if (ret) | |
| return ret; | |
| switch (val) { | |
| case 0: | |
| ret = disable_cmf(cdev); | |
| break; | |
| case 1: | |
| ret = enable_cmf(cdev); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret ? ret : c; | |
| } | |
| DEVICE_ATTR_RW(cmb_enable); | |
| /** | |
| * enable_cmf() - switch on the channel measurement for a specific device | |
| * @cdev: The ccw device to be enabled | |
| * | |
| * Enable channel measurements for @cdev. If this is called on a device | |
| * for which channel measurement is already enabled a reset of the | |
| * measurement data is triggered. | |
| * Returns: %0 for success or a negative error value. | |
| * Context: | |
| * non-atomic | |
| */ | |
| int enable_cmf(struct ccw_device *cdev) | |
| { | |
| int ret = 0; | |
| device_lock(&cdev->dev); | |
| if (cmf_enabled(cdev)) { | |
| cmbops->reset(cdev); | |
| goto out_unlock; | |
| } | |
| get_device(&cdev->dev); | |
| ret = cmbops->alloc(cdev); | |
| if (ret) | |
| goto out; | |
| cmbops->reset(cdev); | |
| ret = sysfs_create_group(&cdev->dev.kobj, cmbops->attr_group); | |
| if (ret) { | |
| cmbops->free(cdev); | |
| goto out; | |
| } | |
| ret = cmbops->set(cdev, 2); | |
| if (ret) { | |
| sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group); | |
| cmbops->free(cdev); | |
| } | |
| out: | |
| if (ret) | |
| put_device(&cdev->dev); | |
| out_unlock: | |
| device_unlock(&cdev->dev); | |
| return ret; | |
| } | |
| /** | |
| * __disable_cmf() - switch off the channel measurement for a specific device | |
| * @cdev: The ccw device to be disabled | |
| * | |
| * Returns: %0 for success or a negative error value. | |
| * | |
| * Context: | |
| * non-atomic, device_lock() held. | |
| */ | |
| int __disable_cmf(struct ccw_device *cdev) | |
| { | |
| int ret; | |
| ret = cmbops->set(cdev, 0); | |
| if (ret) | |
| return ret; | |
| sysfs_remove_group(&cdev->dev.kobj, cmbops->attr_group); | |
| cmbops->free(cdev); | |
| put_device(&cdev->dev); | |
| return ret; | |
| } | |
| /** | |
| * disable_cmf() - switch off the channel measurement for a specific device | |
| * @cdev: The ccw device to be disabled | |
| * | |
| * Returns: %0 for success or a negative error value. | |
| * | |
| * Context: | |
| * non-atomic | |
| */ | |
| int disable_cmf(struct ccw_device *cdev) | |
| { | |
| int ret; | |
| device_lock(&cdev->dev); | |
| ret = __disable_cmf(cdev); | |
| device_unlock(&cdev->dev); | |
| return ret; | |
| } | |
| /** | |
| * cmf_read() - read one value from the current channel measurement block | |
| * @cdev: the channel to be read | |
| * @index: the index of the value to be read | |
| * | |
| * Returns: The value read or %0 if the value cannot be read. | |
| * | |
| * Context: | |
| * any | |
| */ | |
| u64 cmf_read(struct ccw_device *cdev, int index) | |
| { | |
| return cmbops->read(cdev, index); | |
| } | |
| /** | |
| * cmf_readall() - read the current channel measurement block | |
| * @cdev: the channel to be read | |
| * @data: a pointer to a data block that will be filled | |
| * | |
| * Returns: %0 on success, a negative error value otherwise. | |
| * | |
| * Context: | |
| * any | |
| */ | |
| int cmf_readall(struct ccw_device *cdev, struct cmbdata *data) | |
| { | |
| return cmbops->readall(cdev, data); | |
| } | |
| /* Reenable cmf when a disconnected device becomes available again. */ | |
| int cmf_reenable(struct ccw_device *cdev) | |
| { | |
| cmbops->reset(cdev); | |
| return cmbops->set(cdev, 2); | |
| } | |
| /** | |
| * cmf_reactivate() - reactivate measurement block updates | |
| * | |
| * Use this during resume from hibernate. | |
| */ | |
| void cmf_reactivate(void) | |
| { | |
| spin_lock(&cmb_area.lock); | |
| if (!list_empty(&cmb_area.list)) | |
| cmf_activate(cmb_area.mem, CMF_ON); | |
| spin_unlock(&cmb_area.lock); | |
| } | |
| static int __init init_cmbe(void) | |
| { | |
| cmbe_cache = kmem_cache_create("cmbe_cache", sizeof(struct cmbe), | |
| __alignof__(struct cmbe), 0, NULL); | |
| return cmbe_cache ? 0 : -ENOMEM; | |
| } | |
| static int __init init_cmf(void) | |
| { | |
| char *format_string; | |
| char *detect_string; | |
| int ret; | |
| /* | |
| * If the user did not give a parameter, see if we are running on a | |
| * machine supporting extended measurement blocks, otherwise fall back | |
| * to basic mode. | |
| */ | |
| if (format == CMF_AUTODETECT) { | |
| if (!css_general_characteristics.ext_mb) { | |
| format = CMF_BASIC; | |
| } else { | |
| format = CMF_EXTENDED; | |
| } | |
| detect_string = "autodetected"; | |
| } else { | |
| detect_string = "parameter"; | |
| } | |
| switch (format) { | |
| case CMF_BASIC: | |
| format_string = "basic"; | |
| cmbops = &cmbops_basic; | |
| break; | |
| case CMF_EXTENDED: | |
| format_string = "extended"; | |
| cmbops = &cmbops_extended; | |
| ret = init_cmbe(); | |
| if (ret) | |
| return ret; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| pr_info("Channel measurement facility initialized using format " | |
| "%s (mode %s)\n", format_string, detect_string); | |
| return 0; | |
| } | |
| device_initcall(init_cmf); | |
| EXPORT_SYMBOL_GPL(enable_cmf); | |
| EXPORT_SYMBOL_GPL(disable_cmf); | |
| EXPORT_SYMBOL_GPL(cmf_read); | |
| EXPORT_SYMBOL_GPL(cmf_readall); |