| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * driver for channel subsystem | |
| * | |
| * Copyright IBM Corp. 2002, 2010 | |
| * | |
| * Author(s): Arnd Bergmann (arndb@de.ibm.com) | |
| * Cornelia Huck (cornelia.huck@de.ibm.com) | |
| */ | |
| #define KMSG_COMPONENT "cio" | |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | |
| #include <linux/export.h> | |
| #include <linux/init.h> | |
| #include <linux/device.h> | |
| #include <linux/slab.h> | |
| #include <linux/errno.h> | |
| #include <linux/list.h> | |
| #include <linux/reboot.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/genalloc.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/isc.h> | |
| #include <asm/crw.h> | |
| #include "css.h" | |
| #include "cio.h" | |
| #include "blacklist.h" | |
| #include "cio_debug.h" | |
| #include "ioasm.h" | |
| #include "chsc.h" | |
| #include "device.h" | |
| #include "idset.h" | |
| #include "chp.h" | |
| int css_init_done = 0; | |
| int max_ssid; | |
| #define MAX_CSS_IDX 0 | |
| struct channel_subsystem *channel_subsystems[MAX_CSS_IDX + 1]; | |
| static const struct bus_type css_bus_type; | |
| int | |
| for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *data) | |
| { | |
| struct subchannel_id schid; | |
| int ret; | |
| init_subchannel_id(&schid); | |
| do { | |
| do { | |
| ret = fn(schid, data); | |
| if (ret) | |
| break; | |
| } while (schid.sch_no++ < __MAX_SUBCHANNEL); | |
| schid.sch_no = 0; | |
| } while (schid.ssid++ < max_ssid); | |
| return ret; | |
| } | |
| struct cb_data { | |
| void *data; | |
| struct idset *set; | |
| int (*fn_known_sch)(struct subchannel *, void *); | |
| int (*fn_unknown_sch)(struct subchannel_id, void *); | |
| }; | |
| static int call_fn_known_sch(struct device *dev, void *data) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| struct cb_data *cb = data; | |
| int rc = 0; | |
| if (cb->set) | |
| idset_sch_del(cb->set, sch->schid); | |
| if (cb->fn_known_sch) | |
| rc = cb->fn_known_sch(sch, cb->data); | |
| return rc; | |
| } | |
| static int call_fn_unknown_sch(struct subchannel_id schid, void *data) | |
| { | |
| struct cb_data *cb = data; | |
| int rc = 0; | |
| if (idset_sch_contains(cb->set, schid)) | |
| rc = cb->fn_unknown_sch(schid, cb->data); | |
| return rc; | |
| } | |
| static int call_fn_all_sch(struct subchannel_id schid, void *data) | |
| { | |
| struct cb_data *cb = data; | |
| struct subchannel *sch; | |
| int rc = 0; | |
| sch = get_subchannel_by_schid(schid); | |
| if (sch) { | |
| if (cb->fn_known_sch) | |
| rc = cb->fn_known_sch(sch, cb->data); | |
| put_device(&sch->dev); | |
| } else { | |
| if (cb->fn_unknown_sch) | |
| rc = cb->fn_unknown_sch(schid, cb->data); | |
| } | |
| return rc; | |
| } | |
| int for_each_subchannel_staged(int (*fn_known)(struct subchannel *, void *), | |
| int (*fn_unknown)(struct subchannel_id, | |
| void *), void *data) | |
| { | |
| struct cb_data cb; | |
| int rc; | |
| cb.data = data; | |
| cb.fn_known_sch = fn_known; | |
| cb.fn_unknown_sch = fn_unknown; | |
| if (fn_known && !fn_unknown) { | |
| /* Skip idset allocation in case of known-only loop. */ | |
| cb.set = NULL; | |
| return bus_for_each_dev(&css_bus_type, NULL, &cb, | |
| call_fn_known_sch); | |
| } | |
| cb.set = idset_sch_new(); | |
| if (!cb.set) | |
| /* fall back to brute force scanning in case of oom */ | |
| return for_each_subchannel(call_fn_all_sch, &cb); | |
| idset_fill(cb.set); | |
| /* Process registered subchannels. */ | |
| rc = bus_for_each_dev(&css_bus_type, NULL, &cb, call_fn_known_sch); | |
| if (rc) | |
| goto out; | |
| /* Process unregistered subchannels. */ | |
| if (fn_unknown) | |
| rc = for_each_subchannel(call_fn_unknown_sch, &cb); | |
| out: | |
| idset_free(cb.set); | |
| return rc; | |
| } | |
| static void css_sch_todo(struct work_struct *work); | |
| static void css_sch_create_locks(struct subchannel *sch) | |
| { | |
| spin_lock_init(&sch->lock); | |
| mutex_init(&sch->reg_mutex); | |
| } | |
| static void css_subchannel_release(struct device *dev) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| sch->config.intparm = 0; | |
| cio_commit_config(sch); | |
| kfree(sch->driver_override); | |
| kfree(sch); | |
| } | |
| static int css_validate_subchannel(struct subchannel_id schid, | |
| struct schib *schib) | |
| { | |
| int err; | |
| switch (schib->pmcw.st) { | |
| case SUBCHANNEL_TYPE_IO: | |
| case SUBCHANNEL_TYPE_MSG: | |
| if (!css_sch_is_valid(schib)) | |
| err = -ENODEV; | |
| else if (is_blacklisted(schid.ssid, schib->pmcw.dev)) { | |
| CIO_MSG_EVENT(6, "Blacklisted device detected " | |
| "at devno %04X, subchannel set %x\n", | |
| schib->pmcw.dev, schid.ssid); | |
| err = -ENODEV; | |
| } else | |
| err = 0; | |
| break; | |
| default: | |
| err = 0; | |
| } | |
| if (err) | |
| goto out; | |
| CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports subchannel type %04X\n", | |
| schid.ssid, schid.sch_no, schib->pmcw.st); | |
| out: | |
| return err; | |
| } | |
| struct subchannel *css_alloc_subchannel(struct subchannel_id schid, | |
| struct schib *schib) | |
| { | |
| struct subchannel *sch; | |
| int ret; | |
| ret = css_validate_subchannel(schid, schib); | |
| if (ret < 0) | |
| return ERR_PTR(ret); | |
| sch = kzalloc(sizeof(*sch), GFP_KERNEL | GFP_DMA); | |
| if (!sch) | |
| return ERR_PTR(-ENOMEM); | |
| sch->schid = schid; | |
| sch->schib = *schib; | |
| sch->st = schib->pmcw.st; | |
| css_sch_create_locks(sch); | |
| INIT_WORK(&sch->todo_work, css_sch_todo); | |
| sch->dev.release = &css_subchannel_release; | |
| sch->dev.dma_mask = &sch->dma_mask; | |
| device_initialize(&sch->dev); | |
| /* | |
| * The physical addresses for some of the dma structures that can | |
| * belong to a subchannel need to fit 31 bit width (e.g. ccw). | |
| */ | |
| ret = dma_set_coherent_mask(&sch->dev, DMA_BIT_MASK(31)); | |
| if (ret) | |
| goto err; | |
| /* | |
| * But we don't have such restrictions imposed on the stuff that | |
| * is handled by the streaming API. | |
| */ | |
| ret = dma_set_mask(&sch->dev, DMA_BIT_MASK(64)); | |
| if (ret) | |
| goto err; | |
| return sch; | |
| err: | |
| kfree(sch); | |
| return ERR_PTR(ret); | |
| } | |
| static int css_sch_device_register(struct subchannel *sch) | |
| { | |
| int ret; | |
| mutex_lock(&sch->reg_mutex); | |
| dev_set_name(&sch->dev, "0.%x.%04x", sch->schid.ssid, | |
| sch->schid.sch_no); | |
| ret = device_add(&sch->dev); | |
| mutex_unlock(&sch->reg_mutex); | |
| return ret; | |
| } | |
| /** | |
| * css_sch_device_unregister - unregister a subchannel | |
| * @sch: subchannel to be unregistered | |
| */ | |
| void css_sch_device_unregister(struct subchannel *sch) | |
| { | |
| mutex_lock(&sch->reg_mutex); | |
| if (device_is_registered(&sch->dev)) | |
| device_unregister(&sch->dev); | |
| mutex_unlock(&sch->reg_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(css_sch_device_unregister); | |
| static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw) | |
| { | |
| int i; | |
| int mask; | |
| memset(ssd, 0, sizeof(struct chsc_ssd_info)); | |
| ssd->path_mask = pmcw->pim; | |
| for (i = 0; i < 8; i++) { | |
| mask = 0x80 >> i; | |
| if (pmcw->pim & mask) { | |
| chp_id_init(&ssd->chpid[i]); | |
| ssd->chpid[i].id = pmcw->chpid[i]; | |
| } | |
| } | |
| } | |
| static void ssd_register_chpids(struct chsc_ssd_info *ssd) | |
| { | |
| int i; | |
| int mask; | |
| for (i = 0; i < 8; i++) { | |
| mask = 0x80 >> i; | |
| if (ssd->path_mask & mask) | |
| chp_new(ssd->chpid[i]); | |
| } | |
| } | |
| void css_update_ssd_info(struct subchannel *sch) | |
| { | |
| int ret; | |
| ret = chsc_get_ssd_info(sch->schid, &sch->ssd_info); | |
| if (ret) | |
| ssd_from_pmcw(&sch->ssd_info, &sch->schib.pmcw); | |
| ssd_register_chpids(&sch->ssd_info); | |
| } | |
| static ssize_t type_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| return sysfs_emit(buf, "%01x\n", sch->st); | |
| } | |
| static DEVICE_ATTR_RO(type); | |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| return sysfs_emit(buf, "css:t%01X\n", sch->st); | |
| } | |
| static DEVICE_ATTR_RO(modalias); | |
| static ssize_t driver_override_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| int ret; | |
| ret = driver_set_override(dev, &sch->driver_override, buf, count); | |
| if (ret) | |
| return ret; | |
| return count; | |
| } | |
| static ssize_t driver_override_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| ssize_t len; | |
| device_lock(dev); | |
| len = sysfs_emit(buf, "%s\n", sch->driver_override); | |
| device_unlock(dev); | |
| return len; | |
| } | |
| static DEVICE_ATTR_RW(driver_override); | |
| static struct attribute *subch_attrs[] = { | |
| &dev_attr_type.attr, | |
| &dev_attr_modalias.attr, | |
| &dev_attr_driver_override.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group subch_attr_group = { | |
| .attrs = subch_attrs, | |
| }; | |
| static const struct attribute_group *default_subch_attr_groups[] = { | |
| &subch_attr_group, | |
| NULL, | |
| }; | |
| static ssize_t chpids_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| struct chsc_ssd_info *ssd = &sch->ssd_info; | |
| ssize_t ret = 0; | |
| int mask; | |
| int chp; | |
| for (chp = 0; chp < 8; chp++) { | |
| mask = 0x80 >> chp; | |
| if (ssd->path_mask & mask) | |
| ret += sprintf(buf + ret, "%02x ", ssd->chpid[chp].id); | |
| else | |
| ret += sprintf(buf + ret, "00 "); | |
| } | |
| ret += sprintf(buf + ret, "\n"); | |
| return ret; | |
| } | |
| static DEVICE_ATTR_RO(chpids); | |
| static ssize_t pimpampom_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| struct pmcw *pmcw = &sch->schib.pmcw; | |
| return sysfs_emit(buf, "%02x %02x %02x\n", | |
| pmcw->pim, pmcw->pam, pmcw->pom); | |
| } | |
| static DEVICE_ATTR_RO(pimpampom); | |
| static ssize_t dev_busid_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| struct pmcw *pmcw = &sch->schib.pmcw; | |
| if ((pmcw->st == SUBCHANNEL_TYPE_IO && pmcw->dnv) || | |
| (pmcw->st == SUBCHANNEL_TYPE_MSG && pmcw->w)) | |
| return sysfs_emit(buf, "0.%x.%04x\n", sch->schid.ssid, | |
| pmcw->dev); | |
| else | |
| return sysfs_emit(buf, "none\n"); | |
| } | |
| static DEVICE_ATTR_RO(dev_busid); | |
| static struct attribute *io_subchannel_type_attrs[] = { | |
| &dev_attr_chpids.attr, | |
| &dev_attr_pimpampom.attr, | |
| &dev_attr_dev_busid.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(io_subchannel_type); | |
| static const struct device_type io_subchannel_type = { | |
| .groups = io_subchannel_type_groups, | |
| }; | |
| int css_register_subchannel(struct subchannel *sch) | |
| { | |
| int ret; | |
| /* Initialize the subchannel structure */ | |
| sch->dev.parent = &channel_subsystems[0]->device; | |
| sch->dev.bus = &css_bus_type; | |
| sch->dev.groups = default_subch_attr_groups; | |
| if (sch->st == SUBCHANNEL_TYPE_IO) | |
| sch->dev.type = &io_subchannel_type; | |
| css_update_ssd_info(sch); | |
| /* make it known to the system */ | |
| ret = css_sch_device_register(sch); | |
| if (ret) { | |
| CIO_MSG_EVENT(0, "Could not register sch 0.%x.%04x: %d\n", | |
| sch->schid.ssid, sch->schid.sch_no, ret); | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| static int css_probe_device(struct subchannel_id schid, struct schib *schib) | |
| { | |
| struct subchannel *sch; | |
| int ret; | |
| sch = css_alloc_subchannel(schid, schib); | |
| if (IS_ERR(sch)) | |
| return PTR_ERR(sch); | |
| ret = css_register_subchannel(sch); | |
| if (ret) | |
| put_device(&sch->dev); | |
| return ret; | |
| } | |
| static int | |
| check_subchannel(struct device *dev, const void *data) | |
| { | |
| struct subchannel *sch; | |
| struct subchannel_id *schid = (void *)data; | |
| sch = to_subchannel(dev); | |
| return schid_equal(&sch->schid, schid); | |
| } | |
| struct subchannel * | |
| get_subchannel_by_schid(struct subchannel_id schid) | |
| { | |
| struct device *dev; | |
| dev = bus_find_device(&css_bus_type, NULL, | |
| &schid, check_subchannel); | |
| return dev ? to_subchannel(dev) : NULL; | |
| } | |
| /** | |
| * css_sch_is_valid() - check if a subchannel is valid | |
| * @schib: subchannel information block for the subchannel | |
| */ | |
| int css_sch_is_valid(struct schib *schib) | |
| { | |
| if ((schib->pmcw.st == SUBCHANNEL_TYPE_IO) && !schib->pmcw.dnv) | |
| return 0; | |
| if ((schib->pmcw.st == SUBCHANNEL_TYPE_MSG) && !schib->pmcw.w) | |
| return 0; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL_GPL(css_sch_is_valid); | |
| static int css_evaluate_new_subchannel(struct subchannel_id schid, int slow) | |
| { | |
| struct schib schib; | |
| int ccode; | |
| if (!slow) { | |
| /* Will be done on the slow path. */ | |
| return -EAGAIN; | |
| } | |
| /* | |
| * The first subchannel that is not-operational (ccode==3) | |
| * indicates that there aren't any more devices available. | |
| * If stsch gets an exception, it means the current subchannel set | |
| * is not valid. | |
| */ | |
| ccode = stsch(schid, &schib); | |
| if (ccode) | |
| return (ccode == 3) ? -ENXIO : ccode; | |
| return css_probe_device(schid, &schib); | |
| } | |
| static int css_evaluate_known_subchannel(struct subchannel *sch, int slow) | |
| { | |
| int ret = 0; | |
| if (sch->driver) { | |
| if (sch->driver->sch_event) | |
| ret = sch->driver->sch_event(sch, slow); | |
| else | |
| dev_dbg(&sch->dev, | |
| "Got subchannel machine check but " | |
| "no sch_event handler provided.\n"); | |
| } | |
| if (ret != 0 && ret != -EAGAIN) { | |
| CIO_MSG_EVENT(2, "eval: sch 0.%x.%04x, rc=%d\n", | |
| sch->schid.ssid, sch->schid.sch_no, ret); | |
| } | |
| return ret; | |
| } | |
| static void css_evaluate_subchannel(struct subchannel_id schid, int slow) | |
| { | |
| struct subchannel *sch; | |
| int ret; | |
| sch = get_subchannel_by_schid(schid); | |
| if (sch) { | |
| ret = css_evaluate_known_subchannel(sch, slow); | |
| put_device(&sch->dev); | |
| } else | |
| ret = css_evaluate_new_subchannel(schid, slow); | |
| if (ret == -EAGAIN) | |
| css_schedule_eval(schid); | |
| } | |
| /** | |
| * css_sched_sch_todo - schedule a subchannel operation | |
| * @sch: subchannel | |
| * @todo: todo | |
| * | |
| * Schedule the operation identified by @todo to be performed on the slow path | |
| * workqueue. Do nothing if another operation with higher priority is already | |
| * scheduled. Needs to be called with subchannel lock held. | |
| */ | |
| void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) | |
| { | |
| CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", | |
| sch->schid.ssid, sch->schid.sch_no, todo); | |
| if (sch->todo >= todo) | |
| return; | |
| /* Get workqueue ref. */ | |
| if (!get_device(&sch->dev)) | |
| return; | |
| sch->todo = todo; | |
| if (!queue_work(cio_work_q, &sch->todo_work)) { | |
| /* Already queued, release workqueue ref. */ | |
| put_device(&sch->dev); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(css_sched_sch_todo); | |
| static void css_sch_todo(struct work_struct *work) | |
| { | |
| struct subchannel *sch; | |
| enum sch_todo todo; | |
| int ret; | |
| sch = container_of(work, struct subchannel, todo_work); | |
| /* Find out todo. */ | |
| spin_lock_irq(&sch->lock); | |
| todo = sch->todo; | |
| CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, | |
| sch->schid.sch_no, todo); | |
| sch->todo = SCH_TODO_NOTHING; | |
| spin_unlock_irq(&sch->lock); | |
| /* Perform todo. */ | |
| switch (todo) { | |
| case SCH_TODO_NOTHING: | |
| break; | |
| case SCH_TODO_EVAL: | |
| ret = css_evaluate_known_subchannel(sch, 1); | |
| if (ret == -EAGAIN) { | |
| spin_lock_irq(&sch->lock); | |
| css_sched_sch_todo(sch, todo); | |
| spin_unlock_irq(&sch->lock); | |
| } | |
| break; | |
| case SCH_TODO_UNREG: | |
| css_sch_device_unregister(sch); | |
| break; | |
| } | |
| /* Release workqueue ref. */ | |
| put_device(&sch->dev); | |
| } | |
| static struct idset *slow_subchannel_set; | |
| static DEFINE_SPINLOCK(slow_subchannel_lock); | |
| static DECLARE_WAIT_QUEUE_HEAD(css_eval_wq); | |
| static atomic_t css_eval_scheduled; | |
| static int __init slow_subchannel_init(void) | |
| { | |
| atomic_set(&css_eval_scheduled, 0); | |
| slow_subchannel_set = idset_sch_new(); | |
| if (!slow_subchannel_set) { | |
| CIO_MSG_EVENT(0, "could not allocate slow subchannel set\n"); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static int slow_eval_known_fn(struct subchannel *sch, void *data) | |
| { | |
| int eval; | |
| int rc; | |
| spin_lock_irq(&slow_subchannel_lock); | |
| eval = idset_sch_contains(slow_subchannel_set, sch->schid); | |
| idset_sch_del(slow_subchannel_set, sch->schid); | |
| spin_unlock_irq(&slow_subchannel_lock); | |
| if (eval) { | |
| rc = css_evaluate_known_subchannel(sch, 1); | |
| if (rc == -EAGAIN) | |
| css_schedule_eval(sch->schid); | |
| /* | |
| * The loop might take long time for platforms with lots of | |
| * known devices. Allow scheduling here. | |
| */ | |
| cond_resched(); | |
| } | |
| return 0; | |
| } | |
| static int slow_eval_unknown_fn(struct subchannel_id schid, void *data) | |
| { | |
| int eval; | |
| int rc = 0; | |
| spin_lock_irq(&slow_subchannel_lock); | |
| eval = idset_sch_contains(slow_subchannel_set, schid); | |
| idset_sch_del(slow_subchannel_set, schid); | |
| spin_unlock_irq(&slow_subchannel_lock); | |
| if (eval) { | |
| rc = css_evaluate_new_subchannel(schid, 1); | |
| switch (rc) { | |
| case -EAGAIN: | |
| css_schedule_eval(schid); | |
| rc = 0; | |
| break; | |
| case -ENXIO: | |
| case -ENOMEM: | |
| case -EIO: | |
| /* These should abort looping */ | |
| spin_lock_irq(&slow_subchannel_lock); | |
| idset_sch_del_subseq(slow_subchannel_set, schid); | |
| spin_unlock_irq(&slow_subchannel_lock); | |
| break; | |
| default: | |
| rc = 0; | |
| } | |
| /* Allow scheduling here since the containing loop might | |
| * take a while. */ | |
| cond_resched(); | |
| } | |
| return rc; | |
| } | |
| static void css_slow_path_func(struct work_struct *unused) | |
| { | |
| unsigned long flags; | |
| CIO_TRACE_EVENT(4, "slowpath"); | |
| for_each_subchannel_staged(slow_eval_known_fn, slow_eval_unknown_fn, | |
| NULL); | |
| spin_lock_irqsave(&slow_subchannel_lock, flags); | |
| if (idset_is_empty(slow_subchannel_set)) { | |
| atomic_set(&css_eval_scheduled, 0); | |
| wake_up(&css_eval_wq); | |
| } | |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); | |
| } | |
| static DECLARE_DELAYED_WORK(slow_path_work, css_slow_path_func); | |
| struct workqueue_struct *cio_work_q; | |
| void css_schedule_eval(struct subchannel_id schid) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&slow_subchannel_lock, flags); | |
| idset_sch_add(slow_subchannel_set, schid); | |
| atomic_set(&css_eval_scheduled, 1); | |
| queue_delayed_work(cio_work_q, &slow_path_work, 0); | |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); | |
| } | |
| void css_schedule_eval_all(void) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&slow_subchannel_lock, flags); | |
| idset_fill(slow_subchannel_set); | |
| atomic_set(&css_eval_scheduled, 1); | |
| queue_delayed_work(cio_work_q, &slow_path_work, 0); | |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); | |
| } | |
| static int __unset_validpath(struct device *dev, void *data) | |
| { | |
| struct idset *set = data; | |
| struct subchannel *sch = to_subchannel(dev); | |
| struct pmcw *pmcw = &sch->schib.pmcw; | |
| /* Here we want to make sure that we are considering only those subchannels | |
| * which do not have an operational device attached to it. This can be found | |
| * with the help of PAM and POM values of pmcw. OPM provides the information | |
| * about any path which is currently vary-off, so that we should not consider. | |
| */ | |
| if (sch->st == SUBCHANNEL_TYPE_IO && | |
| (sch->opm & pmcw->pam & pmcw->pom)) | |
| idset_sch_del(set, sch->schid); | |
| return 0; | |
| } | |
| static int __unset_online(struct device *dev, void *data) | |
| { | |
| struct idset *set = data; | |
| struct subchannel *sch = to_subchannel(dev); | |
| if (sch->st == SUBCHANNEL_TYPE_IO && sch->config.ena) | |
| idset_sch_del(set, sch->schid); | |
| return 0; | |
| } | |
| void css_schedule_eval_cond(enum css_eval_cond cond, unsigned long delay) | |
| { | |
| unsigned long flags; | |
| struct idset *set; | |
| /* Find unregistered subchannels. */ | |
| set = idset_sch_new(); | |
| if (!set) { | |
| /* Fallback. */ | |
| css_schedule_eval_all(); | |
| return; | |
| } | |
| idset_fill(set); | |
| switch (cond) { | |
| case CSS_EVAL_NO_PATH: | |
| bus_for_each_dev(&css_bus_type, NULL, set, __unset_validpath); | |
| break; | |
| case CSS_EVAL_NOT_ONLINE: | |
| bus_for_each_dev(&css_bus_type, NULL, set, __unset_online); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Apply to slow_subchannel_set. */ | |
| spin_lock_irqsave(&slow_subchannel_lock, flags); | |
| idset_add_set(slow_subchannel_set, set); | |
| atomic_set(&css_eval_scheduled, 1); | |
| queue_delayed_work(cio_work_q, &slow_path_work, delay); | |
| spin_unlock_irqrestore(&slow_subchannel_lock, flags); | |
| idset_free(set); | |
| } | |
| void css_wait_for_slow_path(void) | |
| { | |
| flush_workqueue(cio_work_q); | |
| } | |
| /* Schedule reprobing of all subchannels with no valid operational path. */ | |
| void css_schedule_reprobe(void) | |
| { | |
| /* Schedule with a delay to allow merging of subsequent calls. */ | |
| css_schedule_eval_cond(CSS_EVAL_NO_PATH, 1 * HZ); | |
| } | |
| EXPORT_SYMBOL_GPL(css_schedule_reprobe); | |
| /* | |
| * Called from the machine check handler for subchannel report words. | |
| */ | |
| static void css_process_crw(struct crw *crw0, struct crw *crw1, int overflow) | |
| { | |
| struct subchannel_id mchk_schid; | |
| struct subchannel *sch; | |
| if (overflow) { | |
| css_schedule_eval_all(); | |
| return; | |
| } | |
| CIO_CRW_EVENT(2, "CRW0 reports slct=%d, oflw=%d, " | |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", | |
| crw0->slct, crw0->oflw, crw0->chn, crw0->rsc, crw0->anc, | |
| crw0->erc, crw0->rsid); | |
| if (crw1) | |
| CIO_CRW_EVENT(2, "CRW1 reports slct=%d, oflw=%d, " | |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", | |
| crw1->slct, crw1->oflw, crw1->chn, crw1->rsc, | |
| crw1->anc, crw1->erc, crw1->rsid); | |
| init_subchannel_id(&mchk_schid); | |
| mchk_schid.sch_no = crw0->rsid; | |
| if (crw1) | |
| mchk_schid.ssid = (crw1->rsid >> 4) & 3; | |
| if (crw0->erc == CRW_ERC_PMOD) { | |
| sch = get_subchannel_by_schid(mchk_schid); | |
| if (sch) { | |
| css_update_ssd_info(sch); | |
| put_device(&sch->dev); | |
| } | |
| } | |
| /* | |
| * Since we are always presented with IPI in the CRW, we have to | |
| * use stsch() to find out if the subchannel in question has come | |
| * or gone. | |
| */ | |
| css_evaluate_subchannel(mchk_schid, 0); | |
| } | |
| static void __init | |
| css_generate_pgid(struct channel_subsystem *css, u32 tod_high) | |
| { | |
| struct cpuid cpu_id; | |
| if (css_general_characteristics.mcss) { | |
| css->global_pgid.pgid_high.ext_cssid.version = 0x80; | |
| css->global_pgid.pgid_high.ext_cssid.cssid = | |
| css->id_valid ? css->cssid : 0; | |
| } else { | |
| css->global_pgid.pgid_high.cpu_addr = stap(); | |
| } | |
| get_cpu_id(&cpu_id); | |
| css->global_pgid.cpu_id = cpu_id.ident; | |
| css->global_pgid.cpu_model = cpu_id.machine; | |
| css->global_pgid.tod_high = tod_high; | |
| } | |
| static void channel_subsystem_release(struct device *dev) | |
| { | |
| struct channel_subsystem *css = to_css(dev); | |
| mutex_destroy(&css->mutex); | |
| kfree(css); | |
| } | |
| static ssize_t real_cssid_show(struct device *dev, struct device_attribute *a, | |
| char *buf) | |
| { | |
| struct channel_subsystem *css = to_css(dev); | |
| if (!css->id_valid) | |
| return -EINVAL; | |
| return sysfs_emit(buf, "%x\n", css->cssid); | |
| } | |
| static DEVICE_ATTR_RO(real_cssid); | |
| static ssize_t rescan_store(struct device *dev, struct device_attribute *a, | |
| const char *buf, size_t count) | |
| { | |
| CIO_TRACE_EVENT(4, "usr-rescan"); | |
| css_schedule_eval_all(); | |
| css_complete_work(); | |
| return count; | |
| } | |
| static DEVICE_ATTR_WO(rescan); | |
| static ssize_t cm_enable_show(struct device *dev, struct device_attribute *a, | |
| char *buf) | |
| { | |
| struct channel_subsystem *css = to_css(dev); | |
| int ret; | |
| mutex_lock(&css->mutex); | |
| ret = sysfs_emit(buf, "%x\n", css->cm_enabled); | |
| mutex_unlock(&css->mutex); | |
| return ret; | |
| } | |
| static ssize_t cm_enable_store(struct device *dev, struct device_attribute *a, | |
| const char *buf, size_t count) | |
| { | |
| struct channel_subsystem *css = to_css(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 16, &val); | |
| if (ret) | |
| return ret; | |
| mutex_lock(&css->mutex); | |
| switch (val) { | |
| case 0: | |
| ret = css->cm_enabled ? chsc_secm(css, 0) : 0; | |
| break; | |
| case 1: | |
| ret = css->cm_enabled ? 0 : chsc_secm(css, 1); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| mutex_unlock(&css->mutex); | |
| return ret < 0 ? ret : count; | |
| } | |
| static DEVICE_ATTR_RW(cm_enable); | |
| static umode_t cm_enable_mode(struct kobject *kobj, struct attribute *attr, | |
| int index) | |
| { | |
| return css_chsc_characteristics.secm ? attr->mode : 0; | |
| } | |
| static struct attribute *cssdev_attrs[] = { | |
| &dev_attr_real_cssid.attr, | |
| &dev_attr_rescan.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cssdev_attr_group = { | |
| .attrs = cssdev_attrs, | |
| }; | |
| static struct attribute *cssdev_cm_attrs[] = { | |
| &dev_attr_cm_enable.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cssdev_cm_attr_group = { | |
| .attrs = cssdev_cm_attrs, | |
| .is_visible = cm_enable_mode, | |
| }; | |
| static const struct attribute_group *cssdev_attr_groups[] = { | |
| &cssdev_attr_group, | |
| &cssdev_cm_attr_group, | |
| NULL, | |
| }; | |
| static int __init setup_css(int nr) | |
| { | |
| struct channel_subsystem *css; | |
| int ret; | |
| css = kzalloc(sizeof(*css), GFP_KERNEL); | |
| if (!css) | |
| return -ENOMEM; | |
| channel_subsystems[nr] = css; | |
| dev_set_name(&css->device, "css%x", nr); | |
| css->device.groups = cssdev_attr_groups; | |
| css->device.release = channel_subsystem_release; | |
| /* | |
| * We currently allocate notifier bits with this (using | |
| * css->device as the device argument with the DMA API) | |
| * and are fine with 64 bit addresses. | |
| */ | |
| ret = dma_coerce_mask_and_coherent(&css->device, DMA_BIT_MASK(64)); | |
| if (ret) { | |
| kfree(css); | |
| goto out_err; | |
| } | |
| mutex_init(&css->mutex); | |
| ret = chsc_get_cssid_iid(nr, &css->cssid, &css->iid); | |
| if (!ret) { | |
| css->id_valid = true; | |
| pr_info("Partition identifier %01x.%01x\n", css->cssid, | |
| css->iid); | |
| } | |
| css_generate_pgid(css, (u32) (get_tod_clock() >> 32)); | |
| ret = device_register(&css->device); | |
| if (ret) { | |
| put_device(&css->device); | |
| goto out_err; | |
| } | |
| css->pseudo_subchannel = kzalloc(sizeof(*css->pseudo_subchannel), | |
| GFP_KERNEL); | |
| if (!css->pseudo_subchannel) { | |
| device_unregister(&css->device); | |
| ret = -ENOMEM; | |
| goto out_err; | |
| } | |
| css->pseudo_subchannel->dev.parent = &css->device; | |
| css->pseudo_subchannel->dev.release = css_subchannel_release; | |
| mutex_init(&css->pseudo_subchannel->reg_mutex); | |
| css_sch_create_locks(css->pseudo_subchannel); | |
| dev_set_name(&css->pseudo_subchannel->dev, "defunct"); | |
| ret = device_register(&css->pseudo_subchannel->dev); | |
| if (ret) { | |
| put_device(&css->pseudo_subchannel->dev); | |
| device_unregister(&css->device); | |
| goto out_err; | |
| } | |
| return ret; | |
| out_err: | |
| channel_subsystems[nr] = NULL; | |
| return ret; | |
| } | |
| static int css_reboot_event(struct notifier_block *this, | |
| unsigned long event, | |
| void *ptr) | |
| { | |
| struct channel_subsystem *css; | |
| int ret; | |
| ret = NOTIFY_DONE; | |
| for_each_css(css) { | |
| mutex_lock(&css->mutex); | |
| if (css->cm_enabled) | |
| if (chsc_secm(css, 0)) | |
| ret = NOTIFY_BAD; | |
| mutex_unlock(&css->mutex); | |
| } | |
| return ret; | |
| } | |
| static struct notifier_block css_reboot_notifier = { | |
| .notifier_call = css_reboot_event, | |
| }; | |
| #define CIO_DMA_GFP (GFP_KERNEL | __GFP_ZERO) | |
| static struct gen_pool *cio_dma_pool; | |
| /* Currently cio supports only a single css */ | |
| struct device *cio_get_dma_css_dev(void) | |
| { | |
| return &channel_subsystems[0]->device; | |
| } | |
| struct gen_pool *cio_gp_dma_create(struct device *dma_dev, int nr_pages) | |
| { | |
| struct gen_pool *gp_dma; | |
| void *cpu_addr; | |
| dma_addr_t dma_addr; | |
| int i; | |
| gp_dma = gen_pool_create(3, -1); | |
| if (!gp_dma) | |
| return NULL; | |
| for (i = 0; i < nr_pages; ++i) { | |
| cpu_addr = dma_alloc_coherent(dma_dev, PAGE_SIZE, &dma_addr, | |
| CIO_DMA_GFP); | |
| if (!cpu_addr) | |
| return gp_dma; | |
| gen_pool_add_virt(gp_dma, (unsigned long) cpu_addr, | |
| dma_addr, PAGE_SIZE, -1); | |
| } | |
| return gp_dma; | |
| } | |
| static void __gp_dma_free_dma(struct gen_pool *pool, | |
| struct gen_pool_chunk *chunk, void *data) | |
| { | |
| size_t chunk_size = chunk->end_addr - chunk->start_addr + 1; | |
| dma_free_coherent((struct device *) data, chunk_size, | |
| (void *) chunk->start_addr, | |
| (dma_addr_t) chunk->phys_addr); | |
| } | |
| void cio_gp_dma_destroy(struct gen_pool *gp_dma, struct device *dma_dev) | |
| { | |
| if (!gp_dma) | |
| return; | |
| /* this is quite ugly but no better idea */ | |
| gen_pool_for_each_chunk(gp_dma, __gp_dma_free_dma, dma_dev); | |
| gen_pool_destroy(gp_dma); | |
| } | |
| static int cio_dma_pool_init(void) | |
| { | |
| /* No need to free up the resources: compiled in */ | |
| cio_dma_pool = cio_gp_dma_create(cio_get_dma_css_dev(), 1); | |
| if (!cio_dma_pool) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| void *__cio_gp_dma_zalloc(struct gen_pool *gp_dma, struct device *dma_dev, | |
| size_t size, dma32_t *dma_handle) | |
| { | |
| dma_addr_t dma_addr; | |
| size_t chunk_size; | |
| void *addr; | |
| if (!gp_dma) | |
| return NULL; | |
| addr = gen_pool_dma_alloc(gp_dma, size, &dma_addr); | |
| while (!addr) { | |
| chunk_size = round_up(size, PAGE_SIZE); | |
| addr = dma_alloc_coherent(dma_dev, chunk_size, &dma_addr, CIO_DMA_GFP); | |
| if (!addr) | |
| return NULL; | |
| gen_pool_add_virt(gp_dma, (unsigned long)addr, dma_addr, chunk_size, -1); | |
| addr = gen_pool_dma_alloc(gp_dma, size, dma_handle ? &dma_addr : NULL); | |
| } | |
| if (dma_handle) | |
| *dma_handle = (__force dma32_t)dma_addr; | |
| return addr; | |
| } | |
| void *cio_gp_dma_zalloc(struct gen_pool *gp_dma, struct device *dma_dev, | |
| size_t size) | |
| { | |
| return __cio_gp_dma_zalloc(gp_dma, dma_dev, size, NULL); | |
| } | |
| void cio_gp_dma_free(struct gen_pool *gp_dma, void *cpu_addr, size_t size) | |
| { | |
| if (!cpu_addr) | |
| return; | |
| memset(cpu_addr, 0, size); | |
| gen_pool_free(gp_dma, (unsigned long) cpu_addr, size); | |
| } | |
| /* | |
| * Allocate dma memory from the css global pool. Intended for memory not | |
| * specific to any single device within the css. The allocated memory | |
| * is not guaranteed to be 31-bit addressable. | |
| * | |
| * Caution: Not suitable for early stuff like console. | |
| */ | |
| void *cio_dma_zalloc(size_t size) | |
| { | |
| return cio_gp_dma_zalloc(cio_dma_pool, cio_get_dma_css_dev(), size); | |
| } | |
| void cio_dma_free(void *cpu_addr, size_t size) | |
| { | |
| cio_gp_dma_free(cio_dma_pool, cpu_addr, size); | |
| } | |
| /* | |
| * Now that the driver core is running, we can setup our channel subsystem. | |
| * The struct subchannel's are created during probing. | |
| */ | |
| static int __init css_bus_init(void) | |
| { | |
| int ret, i; | |
| ret = chsc_init(); | |
| if (ret) | |
| return ret; | |
| chsc_determine_css_characteristics(); | |
| /* Try to enable MSS. */ | |
| ret = chsc_enable_facility(CHSC_SDA_OC_MSS); | |
| if (ret) | |
| max_ssid = 0; | |
| else /* Success. */ | |
| max_ssid = __MAX_SSID; | |
| ret = slow_subchannel_init(); | |
| if (ret) | |
| goto out; | |
| ret = crw_register_handler(CRW_RSC_SCH, css_process_crw); | |
| if (ret) | |
| goto out; | |
| if ((ret = bus_register(&css_bus_type))) | |
| goto out; | |
| /* Setup css structure. */ | |
| for (i = 0; i <= MAX_CSS_IDX; i++) { | |
| ret = setup_css(i); | |
| if (ret) | |
| goto out_unregister; | |
| } | |
| ret = register_reboot_notifier(&css_reboot_notifier); | |
| if (ret) | |
| goto out_unregister; | |
| ret = cio_dma_pool_init(); | |
| if (ret) | |
| goto out_unregister_rn; | |
| airq_init(); | |
| css_init_done = 1; | |
| /* Enable default isc for I/O subchannels. */ | |
| isc_register(IO_SCH_ISC); | |
| return 0; | |
| out_unregister_rn: | |
| unregister_reboot_notifier(&css_reboot_notifier); | |
| out_unregister: | |
| while (i-- > 0) { | |
| struct channel_subsystem *css = channel_subsystems[i]; | |
| device_unregister(&css->pseudo_subchannel->dev); | |
| device_unregister(&css->device); | |
| } | |
| bus_unregister(&css_bus_type); | |
| out: | |
| crw_unregister_handler(CRW_RSC_SCH); | |
| idset_free(slow_subchannel_set); | |
| chsc_init_cleanup(); | |
| pr_alert("The CSS device driver initialization failed with " | |
| "errno=%d\n", ret); | |
| return ret; | |
| } | |
| static void __init css_bus_cleanup(void) | |
| { | |
| struct channel_subsystem *css; | |
| for_each_css(css) { | |
| device_unregister(&css->pseudo_subchannel->dev); | |
| device_unregister(&css->device); | |
| } | |
| bus_unregister(&css_bus_type); | |
| crw_unregister_handler(CRW_RSC_SCH); | |
| idset_free(slow_subchannel_set); | |
| chsc_init_cleanup(); | |
| isc_unregister(IO_SCH_ISC); | |
| } | |
| static int __init channel_subsystem_init(void) | |
| { | |
| int ret; | |
| ret = css_bus_init(); | |
| if (ret) | |
| return ret; | |
| cio_work_q = create_singlethread_workqueue("cio"); | |
| if (!cio_work_q) { | |
| ret = -ENOMEM; | |
| goto out_bus; | |
| } | |
| ret = io_subchannel_init(); | |
| if (ret) | |
| goto out_wq; | |
| /* Register subchannels which are already in use. */ | |
| cio_register_early_subchannels(); | |
| /* Start initial subchannel evaluation. */ | |
| css_schedule_eval_all(); | |
| return ret; | |
| out_wq: | |
| destroy_workqueue(cio_work_q); | |
| out_bus: | |
| css_bus_cleanup(); | |
| return ret; | |
| } | |
| subsys_initcall(channel_subsystem_init); | |
| static int css_settle(struct device_driver *drv, void *unused) | |
| { | |
| struct css_driver *cssdrv = to_cssdriver(drv); | |
| if (cssdrv->settle) | |
| return cssdrv->settle(); | |
| return 0; | |
| } | |
| int css_complete_work(void) | |
| { | |
| int ret; | |
| /* Wait for the evaluation of subchannels to finish. */ | |
| ret = wait_event_interruptible(css_eval_wq, | |
| atomic_read(&css_eval_scheduled) == 0); | |
| if (ret) | |
| return -EINTR; | |
| flush_workqueue(cio_work_q); | |
| /* Wait for the subchannel type specific initialization to finish */ | |
| return bus_for_each_drv(&css_bus_type, NULL, NULL, css_settle); | |
| } | |
| /* | |
| * Wait for the initialization of devices to finish, to make sure we are | |
| * done with our setup if the search for the root device starts. | |
| */ | |
| static int __init channel_subsystem_init_sync(void) | |
| { | |
| css_complete_work(); | |
| return 0; | |
| } | |
| subsys_initcall_sync(channel_subsystem_init_sync); | |
| #ifdef CONFIG_PROC_FS | |
| static ssize_t cio_settle_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int ret; | |
| /* Handle pending CRW's. */ | |
| crw_wait_for_channel_report(); | |
| ret = css_complete_work(); | |
| return ret ? ret : count; | |
| } | |
| static const struct proc_ops cio_settle_proc_ops = { | |
| .proc_open = nonseekable_open, | |
| .proc_write = cio_settle_write, | |
| }; | |
| static int __init cio_settle_init(void) | |
| { | |
| struct proc_dir_entry *entry; | |
| entry = proc_create("cio_settle", S_IWUSR, NULL, &cio_settle_proc_ops); | |
| if (!entry) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| device_initcall(cio_settle_init); | |
| #endif /*CONFIG_PROC_FS*/ | |
| int sch_is_pseudo_sch(struct subchannel *sch) | |
| { | |
| if (!sch->dev.parent) | |
| return 0; | |
| return sch == to_css(sch->dev.parent)->pseudo_subchannel; | |
| } | |
| static int css_bus_match(struct device *dev, const struct device_driver *drv) | |
| { | |
| struct subchannel *sch = to_subchannel(dev); | |
| const struct css_driver *driver = to_cssdriver(drv); | |
| struct css_device_id *id; | |
| /* When driver_override is set, only bind to the matching driver */ | |
| if (sch->driver_override && strcmp(sch->driver_override, drv->name)) | |
| return 0; | |
| for (id = driver->subchannel_type; id->match_flags; id++) { | |
| if (sch->st == id->type) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int css_probe(struct device *dev) | |
| { | |
| struct subchannel *sch; | |
| int ret; | |
| sch = to_subchannel(dev); | |
| sch->driver = to_cssdriver(dev->driver); | |
| ret = sch->driver->probe ? sch->driver->probe(sch) : 0; | |
| if (ret) | |
| sch->driver = NULL; | |
| return ret; | |
| } | |
| static void css_remove(struct device *dev) | |
| { | |
| struct subchannel *sch; | |
| sch = to_subchannel(dev); | |
| if (sch->driver->remove) | |
| sch->driver->remove(sch); | |
| sch->driver = NULL; | |
| } | |
| static void css_shutdown(struct device *dev) | |
| { | |
| struct subchannel *sch; | |
| sch = to_subchannel(dev); | |
| if (sch->driver && sch->driver->shutdown) | |
| sch->driver->shutdown(sch); | |
| } | |
| static int css_uevent(const struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| const struct subchannel *sch = to_subchannel(dev); | |
| int ret; | |
| ret = add_uevent_var(env, "ST=%01X", sch->st); | |
| if (ret) | |
| return ret; | |
| ret = add_uevent_var(env, "MODALIAS=css:t%01X", sch->st); | |
| return ret; | |
| } | |
| static const struct bus_type css_bus_type = { | |
| .name = "css", | |
| .match = css_bus_match, | |
| .probe = css_probe, | |
| .remove = css_remove, | |
| .shutdown = css_shutdown, | |
| .uevent = css_uevent, | |
| }; | |
| /** | |
| * css_driver_register - register a css driver | |
| * @cdrv: css driver to register | |
| * | |
| * This is mainly a wrapper around driver_register that sets name | |
| * and bus_type in the embedded struct device_driver correctly. | |
| */ | |
| int css_driver_register(struct css_driver *cdrv) | |
| { | |
| cdrv->drv.bus = &css_bus_type; | |
| return driver_register(&cdrv->drv); | |
| } | |
| EXPORT_SYMBOL_GPL(css_driver_register); | |
| /** | |
| * css_driver_unregister - unregister a css driver | |
| * @cdrv: css driver to unregister | |
| * | |
| * This is a wrapper around driver_unregister. | |
| */ | |
| void css_driver_unregister(struct css_driver *cdrv) | |
| { | |
| driver_unregister(&cdrv->drv); | |
| } | |
| EXPORT_SYMBOL_GPL(css_driver_unregister); |