| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm Technologies, Inc. PM8008 PMIC |
| |
| maintainers: |
| - Guru Das Srinagesh <quic_gurus@quicinc.com> |
| |
| description: | |
| Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates |
| all the necessary power management, housekeeping, and interface support |
| functions into a single IC. |
| |
| properties: |
| compatible: |
| const: qcom,pm8008 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| vdd-l1-l2-supply: true |
| vdd-l3-l4-supply: true |
| vdd-l5-supply: true |
| vdd-l6-supply: true |
| vdd-l7-supply: true |
| |
| gpio-controller: true |
| |
| "#gpio-cells": |
| const: 2 |
| |
| gpio-ranges: |
| maxItems: 1 |
| |
| interrupt-controller: true |
| |
| "#interrupt-cells": |
| const: 2 |
| |
| "#thermal-sensor-cells": |
| const: 0 |
| |
| pinctrl: |
| type: object |
| additionalProperties: false |
| patternProperties: |
| "-state$": |
| type: object |
| |
| allOf: |
| - $ref: /schemas/pinctrl/pinmux-node.yaml |
| - $ref: /schemas/pinctrl/pincfg-node.yaml |
| |
| properties: |
| pins: |
| items: |
| pattern: "^gpio[12]$" |
| |
| function: |
| items: |
| - enum: |
| - normal |
| |
| required: |
| - pins |
| - function |
| |
| additionalProperties: false |
| |
| regulators: |
| type: object |
| additionalProperties: false |
| patternProperties: |
| "^ldo[1-7]$": |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - vdd-l1-l2-supply |
| - vdd-l3-l4-supply |
| - vdd-l5-supply |
| - vdd-l6-supply |
| - vdd-l7-supply |
| - gpio-controller |
| - "#gpio-cells" |
| - gpio-ranges |
| - interrupt-controller |
| - "#interrupt-cells" |
| - "#thermal-sensor-cells" |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pm8008: pmic@8 { |
| compatible = "qcom,pm8008"; |
| reg = <0x8>; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <32 IRQ_TYPE_EDGE_RISING>; |
| |
| reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; |
| |
| vdd-l1-l2-supply = <&vreg_s8b_1p2>; |
| vdd-l3-l4-supply = <&vreg_s1b_1p8>; |
| vdd-l5-supply = <&vreg_bob>; |
| vdd-l6-supply = <&vreg_bob>; |
| vdd-l7-supply = <&vreg_bob>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pm8008 0 0 2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| #thermal-sensor-cells = <0>; |
| |
| pinctrl { |
| gpio-keys-state { |
| pins = "gpio1"; |
| function = "normal"; |
| }; |
| }; |
| |
| regulators { |
| ldo1 { |
| regulator-name = "vreg_l1"; |
| regulator-min-microvolt = <950000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
