blob: 60aaf30d68edf5f2eed3249b480f4624a725bf2c [file] [log] [blame] [edit]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP FMan MAC
maintainers:
- Madalin Bucur <madalin.bucur@nxp.com>
description: |
Each FMan has several MACs, each implementing an Ethernet interface. Earlier
versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
(10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
Ethernet Media Access Controller (mEMAC) to handle all speeds.
properties:
compatible:
enum:
- fsl,fman-dtsec
- fsl,fman-xgec
- fsl,fman-memac
cell-index:
maximum: 64
description: |
FManV2:
register[bit] MAC cell-index
============================================================
FM_EPI[16] XGEC 8
FM_EPI[16+n] dTSECn n-1
FM_NPI[11+n] dTSECn n-1
n = 1,..,5
FManV3:
register[bit] MAC cell-index
============================================================
FM_EPI[16+n] mEMACn n-1
FM_EPI[25] mEMAC10 9
FM_NPI[11+n] mEMACn n-1
FM_NPI[10] mEMAC10 9
FM_NPI[11] mEMAC9 8
n = 1,..8
FM_EPI and FM_NPI are located in the FMan memory map.
2. SoC registers:
- P2041, P3041, P4080 P5020, P5040:
register[bit] FMan MAC cell
Unit index
============================================================
DCFG_DEVDISR2[7] 1 XGEC 8
DCFG_DEVDISR2[7+n] 1 dTSECn n-1
DCFG_DEVDISR2[15] 2 XGEC 8
DCFG_DEVDISR2[15+n] 2 dTSECn n-1
n = 1,..5
- T1040, T2080, T4240, B4860:
register[bit] FMan MAC cell
Unit index
============================================================
DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
n = 1,..6,9,10
EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
the specific SoC "Device Configuration/Pin Control" Memory
Map.
reg:
maxItems: 1
fsl,fman-ports:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 2
description: |
An array of two references: the first is the FMan RX port and the second
is the TX port used by this MAC.
ptp-timer:
$ref: /schemas/types.yaml#/definitions/phandle
description: A reference to the IEEE1588 timer
phys:
description: A reference to the SerDes lane(s)
maxItems: 1
phy-names:
items:
- const: serdes
pcsphy-handle:
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 3
deprecated: true
description: See pcs-handle.
pcs-handle:
minItems: 1
maxItems: 3
description: |
A reference to the various PCSs (typically found on the SerDes). If
pcs-handle-names is absent, and phy-connection-type is "xgmii", then the first
reference will be assumed to be for "xfi". Otherwise, if pcs-handle-names is
absent, then the first reference will be assumed to be for "sgmii".
pcs-handle-names:
minItems: 1
maxItems: 3
items:
enum:
- sgmii
- qsgmii
- xfi
description: The type of each PCS in pcsphy-handle.
tbi-handle:
$ref: /schemas/types.yaml#/definitions/phandle
description: A reference to the (TBI-based) PCS
required:
- compatible
- cell-index
- reg
- fsl,fman-ports
dependencies:
pcs-handle-names:
- pcs-handle
allOf:
- $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
contains:
const: fsl,fman-dtsec
then:
required:
- tbi-handle
unevaluatedProperties: false
examples:
- |
ethernet@e0000 {
compatible = "fsl,fman-dtsec";
cell-index = <0>;
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
ptp-timer = <&ptp_timer>;
tbi-handle = <&tbi0>;
};
- |
ethernet@e8000 {
cell-index = <4>;
compatible = "fsl,fman-memac";
reg = <0xe8000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
ptp-timer = <&ptp_timer0>;
pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
pcs-handle-names = "sgmii", "qsgmii";
phys = <&serdes1 1>;
phy-names = "serdes";
};
...