| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Properties for an MDIO bus multiplexer consumer device |
| |
| maintainers: |
| - Andrew Lunn <andrew@lunn.ch> |
| |
| description: |+ |
| This is a special case of MDIO mux when MDIO mux is defined as a consumer |
| of a mux producer device. The mux producer can be of any type like mmio mux |
| producer, gpio mux producer or generic register based mux producer. |
| |
| |
| allOf: |
| - $ref: /schemas/net/mdio-mux.yaml# |
| |
| properties: |
| compatible: |
| const: mdio-mux-multiplexer |
| |
| mux-controls: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - mux-controls |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| mux: mux-controller { // Mux Producer |
| compatible = "reg-mux"; |
| #mux-control-cells = <1>; |
| mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ |
| <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ |
| }; |
| |
| mdio-mux-1 { // Mux consumer |
| compatible = "mdio-mux-multiplexer"; |
| mux-controls = <&mux 0>; |
| mdio-parent-bus = <&emdio1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mdio@8 { |
| reg = <0x8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| mdio-mux-2 { // Mux consumer |
| compatible = "mdio-mux-multiplexer"; |
| mux-controls = <&mux 1>; |
| mdio-parent-bus = <&emdio2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mdio@1 { |
| reg = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| ... |
