| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Freescale Layerscape PCIe Root Complex(RC) controller |
| |
| maintainers: |
| - Frank Li <Frank.Li@nxp.com> |
| |
| description: |
| This PCIe RC controller is based on the Synopsys DesignWare PCIe IP |
| |
| This controller derives its clocks from the Reset Configuration Word (RCW) |
| which is used to describe the PLL settings at the time of chip-reset. |
| |
| Also as per the available Reference Manuals, there is no specific 'version' |
| register available in the Freescale PCIe controller register set, |
| which can allow determining the underlying DesignWare PCIe controller version |
| information. |
| |
| properties: |
| compatible: |
| enum: |
| - fsl,ls1021a-pcie |
| - fsl,ls2080a-pcie |
| - fsl,ls2085a-pcie |
| - fsl,ls2088a-pcie |
| - fsl,ls1088a-pcie |
| - fsl,ls1046a-pcie |
| - fsl,ls1043a-pcie |
| - fsl,ls1012a-pcie |
| - fsl,ls1028a-pcie |
| - fsl,lx2160a-pcie |
| |
| reg: |
| maxItems: 2 |
| |
| reg-names: |
| items: |
| - const: regs |
| - const: config |
| |
| fsl,pcie-scfg: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: A phandle to the SCFG device node. The second entry is the |
| physical PCIe controller index starting from '0'. This is used to get |
| SCFG PEXN registers. |
| |
| big-endian: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: If the PEX_LUT and PF register block is in big-endian, specify |
| this property. |
| |
| dma-coherent: true |
| |
| msi-parent: true |
| |
| iommu-map: true |
| |
| interrupts: |
| minItems: 1 |
| maxItems: 2 |
| |
| interrupt-names: |
| minItems: 1 |
| maxItems: 2 |
| |
| required: |
| - compatible |
| - reg |
| - reg-names |
| - "#address-cells" |
| - "#size-cells" |
| - device_type |
| - bus-range |
| - ranges |
| - interrupts |
| - interrupt-names |
| - "#interrupt-cells" |
| - interrupt-map-mask |
| - interrupt-map |
| |
| allOf: |
| - $ref: /schemas/pci/pci-bus.yaml# |
| |
| - if: |
| properties: |
| compatible: |
| enum: |
| - fsl,ls1028a-pcie |
| - fsl,ls1046a-pcie |
| - fsl,ls1043a-pcie |
| - fsl,ls1012a-pcie |
| then: |
| properties: |
| interrupts: |
| maxItems: 2 |
| interrupt-names: |
| items: |
| - const: pme |
| - const: aer |
| |
| - if: |
| properties: |
| compatible: |
| enum: |
| - fsl,ls2080a-pcie |
| - fsl,ls2085a-pcie |
| - fsl,ls2088a-pcie |
| then: |
| properties: |
| interrupts: |
| maxItems: 1 |
| interrupt-names: |
| items: |
| - const: intr |
| |
| - if: |
| properties: |
| compatible: |
| enum: |
| - fsl,ls1088a-pcie |
| then: |
| properties: |
| interrupts: |
| maxItems: 1 |
| interrupt-names: |
| items: |
| - const: aer |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| pcie@3400000 { |
| compatible = "fsl,ls1088a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ |
| <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ |
| interrupt-names = "aer"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| dma-coherent; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&its>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; |
| iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ |
| }; |
| }; |
| ... |