| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm SA8775p PCI Express Root Complex |
| |
| maintainers: |
| - Bjorn Andersson <andersson@kernel.org> |
| - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| |
| description: |
| Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys |
| DesignWare PCIe IP. |
| |
| properties: |
| compatible: |
| const: qcom,pcie-sa8775p |
| |
| reg: |
| minItems: 6 |
| maxItems: 6 |
| |
| reg-names: |
| items: |
| - const: parf # Qualcomm specific registers |
| - const: dbi # DesignWare PCIe registers |
| - const: elbi # External local bus interface registers |
| - const: atu # ATU address space |
| - const: config # PCIe configuration space |
| - const: mhi # MHI registers |
| |
| clocks: |
| minItems: 5 |
| maxItems: 5 |
| |
| clock-names: |
| items: |
| - const: aux # Auxiliary clock |
| - const: cfg # Configuration clock |
| - const: bus_master # Master AXI clock |
| - const: bus_slave # Slave AXI clock |
| - const: slave_q2a # Slave Q2A clock |
| |
| interrupts: |
| minItems: 8 |
| maxItems: 8 |
| |
| interrupt-names: |
| items: |
| - const: msi0 |
| - const: msi1 |
| - const: msi2 |
| - const: msi3 |
| - const: msi4 |
| - const: msi5 |
| - const: msi6 |
| - const: msi7 |
| |
| resets: |
| maxItems: 1 |
| |
| reset-names: |
| items: |
| - const: pci |
| |
| required: |
| - interconnects |
| - interconnect-names |
| |
| allOf: |
| - $ref: qcom,pcie-common.yaml# |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,sa8775p-gcc.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| pcie@1c00000 { |
| compatible = "qcom,pcie-sa8775p"; |
| reg = <0x0 0x01c00000 0x0 0x3000>, |
| <0x0 0x40000000 0x0 0xf20>, |
| <0x0 0x40000f20 0x0 0xa8>, |
| <0x0 0x40001000 0x0 0x4000>, |
| <0x0 0x40100000 0x0 0x100000>, |
| <0x0 0x01c03000 0x0 0x1000>; |
| reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| |
| bus-range = <0x00 0xff>; |
| device_type = "pci"; |
| linux,pci-domain = <0>; |
| num-lanes = <2>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a"; |
| |
| dma-coherent; |
| |
| interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; |
| interconnect-names = "pcie-mem", "cpu-pcie"; |
| |
| iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, |
| <0x100 &pcie_smmu 0x0001 0x1>; |
| |
| phys = <&pcie0_phy>; |
| phy-names = "pciephy"; |
| |
| power-domains = <&gcc PCIE_0_GDSC>; |
| |
| resets = <&gcc GCC_PCIE_0_BCR>; |
| reset-names = "pci"; |
| |
| perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |