Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung SoC series PCIe Host Controller

maintainers:
  - Marek Szyprowski <m.szyprowski@samsung.com>
  - Jaehoon Chung <jh80.chung@samsung.com>

description: |+
  Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
  PCIe IP and thus inherits all the common properties defined in
  snps,dw-pcie.yaml.

allOf:
  - $ref: /schemas/pci/snps,dw-pcie.yaml#

properties:
  compatible:
    const: samsung,exynos5433-pcie

  reg:
    items:
      - description: Data Bus Interface (DBI) registers.
      - description: External Local Bus interface (ELBI) registers.
      - description: PCIe configuration space region.

  reg-names:
    items:
      - const: dbi
      - const: elbi
      - const: config

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: PCIe bridge clock
      - description: PCIe bus clock

  clock-names:
    items:
      - const: pcie
      - const: pcie_bus

  phys:
    maxItems: 1

  vdd10-supply:
    description:
      Phandle to a regulator that provides 1.0V power to the PCIe block.

  vdd18-supply:
    description:
      Phandle to a regulator that provides 1.8V power to the PCIe block.

  num-lanes:
    const: 1

  num-viewport:
    const: 3

required:
  - reg
  - reg-names
  - interrupts
  - "#address-cells"
  - "#size-cells"
  - "#interrupt-cells"
  - interrupt-map
  - interrupt-map-mask
  - ranges
  - bus-range
  - device_type
  - num-lanes
  - num-viewport
  - clocks
  - clock-names
  - phys
  - vdd10-supply
  - vdd18-supply

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/exynos5433.h>

    pcie: pcie@15700000 {
        compatible = "samsung,exynos5433-pcie";
        reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
        reg-names = "dbi", "elbi", "config";
        #address-cells = <3>;
        #size-cells = <2>;
        #interrupt-cells = <1>;
        device_type = "pci";
        interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
        clock-names = "pcie", "pcie_bus";
        phys = <&pcie_phy>;
        pinctrl-0 = <&pcie_bus &pcie_wlanen>;
        pinctrl-names = "default";
        num-lanes = <1>;
        num-viewport = <3>;
        bus-range = <0x00 0xff>;
        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
                 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
        vdd10-supply = <&ldo6_reg>;
        vdd18-supply = <&ldo7_reg>;
        interrupt-map-mask = <0 0 0 0>;
        interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
    };
...