Documentation/networking/bridge.rst - linux - Git at Google

 .. SPDX-License-Identifier: GPL-2.0

 =================
 Ethernet Bridging
 =================

 Introduction
 ============

 The IEEE 802.1Q-2022 (Bridges and Bridged Networks) standard defines the
 operation of bridges in computer networks. A bridge, in the context of this
 standard, is a device that connects two or more network segments and operates
 at the data link layer (Layer 2) of the OSI (Open Systems Interconnection)
 model. The purpose of a bridge is to filter and forward frames between
 different segments based on the destination MAC (Media Access Control) address.

 Bridge kAPI
 ===========

 Here are some core structures of bridge code. Note that the kAPI is *unstable*,
 and can be changed at any time.

 .. kernel-doc:: net/bridge/br_private.h
    :identifiers: net_bridge_vlan

 Bridge uAPI
 ===========

 Modern Linux bridge uAPI is accessed via Netlink interface. You can find
 below files where the bridge and bridge port netlink attributes are defined.

 Bridge netlink attributes
 -------------------------

 .. kernel-doc:: include/uapi/linux/if_link.h
    :doc: Bridge enum definition

 Bridge port netlink attributes
 ------------------------------

 .. kernel-doc:: include/uapi/linux/if_link.h
    :doc: Bridge port enum definition

 Bridge sysfs
 ------------

 The sysfs interface is deprecated and should not be extended if new
 options are added.

 STP
 ===

 The STP (Spanning Tree Protocol) implementation in the Linux bridge driver
 is a critical feature that helps prevent loops and broadcast storms in
 Ethernet networks by identifying and disabling redundant links. In a Linux
 bridge context, STP is crucial for network stability and availability.

 STP is a Layer 2 protocol that operates at the Data Link Layer of the OSI
 model. It was originally developed as IEEE 802.1D and has since evolved into
 multiple versions, including Rapid Spanning Tree Protocol (RSTP) and
 `Multiple Spanning Tree Protocol (MSTP)
 <https://lore.kernel.org/netdev/20220316150857.2442916-1-tobias@waldekranz.com/>`_.

 The 802.1D-2004 removed the original Spanning Tree Protocol, instead
 incorporating the Rapid Spanning Tree Protocol (RSTP). By 2014, all the
 functionality defined by IEEE 802.1D has been incorporated into either
 IEEE 802.1Q (Bridges and Bridged Networks) or IEEE 802.1AC (MAC Service
 Definition). 802.1D has been officially withdrawn in 2022.

 Bridge Ports and STP States
 ---------------------------

 In the context of STP, bridge ports can be in one of the following states:
   * Blocking: The port is disabled for data traffic and only listens for
     BPDUs (Bridge Protocol Data Units) from other devices to determine the
     network topology.
   * Listening: The port begins to participate in the STP process and listens
     for BPDUs.
   * Learning: The port continues to listen for BPDUs and begins to learn MAC
     addresses from incoming frames but does not forward data frames.
   * Forwarding: The port is fully operational and forwards both BPDUs and
     data frames.
   * Disabled: The port is administratively disabled and does not participate
     in the STP process. The data frames forwarding are also disabled.

 Root Bridge and Convergence
 ---------------------------

 In the context of networking and Ethernet bridging in Linux, the root bridge
 is a designated switch in a bridged network that serves as a reference point
 for the spanning tree algorithm to create a loop-free topology.

 Here's how the STP works and root bridge is chosen:
   1. Bridge Priority: Each bridge running a spanning tree protocol, has a
      configurable Bridge Priority value. The lower the value, the higher the
      priority. By default, the Bridge Priority is set to a standard value
      (e.g., 32768).
   2. Bridge ID: The Bridge ID is composed of two components: Bridge Priority
      and the MAC address of the bridge. It uniquely identifies each bridge
      in the network. The Bridge ID is used to compare the priorities of
      different bridges.
   3. Bridge Election: When the network starts, all bridges initially assume
      that they are the root bridge. They start advertising Bridge Protocol
      Data Units (BPDU) to their neighbors, containing their Bridge ID and
      other information.
   4. BPDU Comparison: Bridges exchange BPDUs to determine the root bridge.
      Each bridge examines the received BPDUs, including the Bridge Priority
      and Bridge ID, to determine if it should adjust its own priorities.
      The bridge with the lowest Bridge ID will become the root bridge.
   5. Root Bridge Announcement: Once the root bridge is determined, it sends
      BPDUs with information about the root bridge to all other bridges in the
      network. This information is used by other bridges to calculate the
      shortest path to the root bridge and, in doing so, create a loop-free
      topology.
   6. Forwarding Ports: After the root bridge is selected and the spanning tree
      topology is established, each bridge determines which of its ports should
      be in the forwarding state (used for data traffic) and which should be in
      the blocking state (used to prevent loops). The root bridge's ports are
      all in the forwarding state. while other bridges have some ports in the
      blocking state to avoid loops.
   7. Root Ports: After the root bridge is selected and the spanning tree
      topology is established, each non-root bridge processes incoming
      BPDUs and determines which of its ports provides the shortest path to the
      root bridge based on the information in the received BPDUs. This port is
      designated as the root port. And it is in the Forwarding state, allowing
      it to actively forward network traffic.
   8. Designated ports: A designated port is the port through which the non-root
      bridge will forward traffic towards the designated segment. Designated ports
      are placed in the Forwarding state. All other ports on the non-root
      bridge that are not designated for specific segments are placed in the
      Blocking state to prevent network loops.

 STP ensures network convergence by calculating the shortest path and disabling
 redundant links. When network topology changes occur (e.g., a link failure),
 STP recalculates the network topology to restore connectivity while avoiding loops.

 Proper configuration of STP parameters, such as the bridge priority, can
 influence network performance, path selection and which bridge becomes the
 Root Bridge.

 User space STP helper
 ---------------------

 The user space STP helper *bridge-stp* is a program to control whether to use
 user mode spanning tree. The ``/sbin/bridge-stp <bridge> <start|stop>`` is
 called by the kernel when STP is enabled/disabled on a bridge
 (via ``brctl stp <bridge> <on|off>`` or ``ip link set <bridge> type bridge
 stp_state <0|1>``).  The kernel enables user_stp mode if that command returns
 0, or enables kernel_stp mode if that command returns any other value.

 VLAN
 ====

 A LAN (Local Area Network) is a network that covers a small geographic area,
 typically within a single building or a campus. LANs are used to connect
 computers, servers, printers, and other networked devices within a localized
 area. LANs can be wired (using Ethernet cables) or wireless (using Wi-Fi).

 A VLAN (Virtual Local Area Network) is a logical segmentation of a physical
 network into multiple isolated broadcast domains. VLANs are used to divide
 a single physical LAN into multiple virtual LANs, allowing different groups of
 devices to communicate as if they were on separate physical networks.

 Typically there are two VLAN implementations, IEEE 802.1Q and IEEE 802.1ad
 (also known as QinQ). IEEE 802.1Q is a standard for VLAN tagging in Ethernet
 networks. It allows network administrators to create logical VLANs on a
 physical network and tag Ethernet frames with VLAN information, which is
 called *VLAN-tagged frames*. IEEE 802.1ad, commonly known as QinQ or Double
 VLAN, is an extension of the IEEE 802.1Q standard. QinQ allows for the
 stacking of multiple VLAN tags within a single Ethernet frame. The Linux
 bridge supports both the IEEE 802.1Q and `802.1AD
 <https://lore.kernel.org/netdev/1402401565-15423-1-git-send-email-makita.toshiaki@lab.ntt.co.jp/>`_
 protocol for VLAN tagging.

 `VLAN filtering <https://lore.kernel.org/netdev/1360792820-14116-1-git-send-email-vyasevic@redhat.com/>`_
 on a bridge is disabled by default. After enabling VLAN filtering on a bridge,
 it will start forwarding frames to appropriate destinations based on their
 destination MAC address and VLAN tag (both must match).

 Multicast
 =========

 The Linux bridge driver has multicast support allowing it to process Internet
 Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD)
 messages, and to efficiently forward multicast data packets. The bridge
 driver supports IGMPv2/IGMPv3 and MLDv1/MLDv2.

 Multicast snooping
 ------------------

 Multicast snooping is a networking technology that allows network switches
 to intelligently manage multicast traffic within a local area network (LAN).

 The switch maintains a multicast group table, which records the association
 between multicast group addresses and the ports where hosts have joined these
 groups. The group table is dynamically updated based on the IGMP/MLD messages
 received. With the multicast group information gathered through snooping, the
 switch optimizes the forwarding of multicast traffic. Instead of blindly
 broadcasting the multicast traffic to all ports, it sends the multicast
 traffic based on the destination MAC address only to ports which have
 subscribed the respective destination multicast group.

 When created, the Linux bridge devices have multicast snooping enabled by
 default. It maintains a Multicast forwarding database (MDB) which keeps track
 of port and group relationships.

 IGMPv3/MLDv2 EHT support
 ------------------------

 The Linux bridge supports IGMPv3/MLDv2 EHT (Explicit Host Tracking), which
 was added by `474ddb37fa3a ("net: bridge: multicast: add EHT allow/block handling")
 <https://lore.kernel.org/netdev/20210120145203.1109140-1-razor@blackwall.org/>`_

 The explicit host tracking enables the device to keep track of each
 individual host that is joined to a particular group or channel. The main
 benefit of the explicit host tracking in IGMP is to allow minimal leave
 latencies when a host leaves a multicast group or channel.

 The length of time between a host wanting to leave and a device stopping
 traffic forwarding is called the IGMP leave latency. A device configured
 with IGMPv3 or MLDv2 and explicit tracking can immediately stop forwarding
 traffic if the last host to request to receive traffic from the device
 indicates that it no longer wants to receive traffic. The leave latency
 is thus bound only by the packet transmission latencies in the multiaccess
 network and the processing time in the device.

 Other multicast features
 ------------------------

 The Linux bridge also supports `per-VLAN multicast snooping
 <https://lore.kernel.org/netdev/20210719170637.435541-1-razor@blackwall.org/>`_,
 which is disabled by default but can be enabled. And `Multicast Router Discovery
 <https://lore.kernel.org/netdev/20190121062628.2710-1-linus.luessing@c0d3.blue/>`_,
 which help identify the location of multicast routers.

 Switchdev
 =========

 Linux Bridge Switchdev is a feature in the Linux kernel that extends the
 capabilities of the traditional Linux bridge to work more efficiently with
 hardware switches that support switchdev. With Linux Bridge Switchdev, certain
 networking functions like forwarding, filtering, and learning of Ethernet
 frames can be offloaded to a hardware switch. This offloading reduces the
 burden on the Linux kernel and CPU, leading to improved network performance
 and lower latency.

 To use Linux Bridge Switchdev, you need hardware switches that support the
 switchdev interface. This means that the switch hardware needs to have the
 necessary drivers and functionality to work in conjunction with the Linux
 kernel.

 Please see the :ref:`switchdev` document for more details.

 Netfilter
 =========

 The bridge netfilter module is a legacy feature that allows to filter bridged
 packets with iptables and ip6tables. Its use is discouraged. Users should
 consider using nftables for packet filtering.

 The older ebtables tool is more feature-limited compared to nftables, but
 just like nftables it doesn't need this module either to function.

 The br_netfilter module intercepts packets entering the bridge, performs
 minimal sanity tests on ipv4 and ipv6 packets and then pretends that
 these packets are being routed, not bridged. br_netfilter then calls
 the ip and ipv6 netfilter hooks from the bridge layer, i.e. ip(6)tables
 rulesets will also see these packets.

 br_netfilter is also the reason for the iptables *physdev* match:
 This match is the only way to reliably tell routed and bridged packets
 apart in an iptables ruleset.

 Note that ebtables and nftables will work fine without the br_netfilter module.
 iptables/ip6tables/arptables do not work for bridged traffic because they
 plug in the routing stack. nftables rules in ip/ip6/inet/arp families won't
 see traffic that is forwarded by a bridge either, but that's very much how it
 should be.

 Historically the feature set of ebtables was very limited (it still is),
 this module was added to pretend packets are routed and invoke the ipv4/ipv6
 netfilter hooks from the bridge so users had access to the more feature-rich
 iptables matching capabilities (including conntrack). nftables doesn't have
 this limitation, pretty much all features work regardless of the protocol family.

 So, br_netfilter is only needed if users, for some reason, need to use
 ip(6)tables to filter packets forwarded by the bridge, or NAT bridged
 traffic. For pure link layer filtering, this module isn't needed.

 Other Features
 ==============

 The Linux bridge also supports `IEEE 802.11 Proxy ARP
 <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=958501163ddd6ea22a98f94fa0e7ce6d4734e5c4>`_,
 `Media Redundancy Protocol (MRP)
 <https://lore.kernel.org/netdev/20200426132208.3232-1-horatiu.vultur@microchip.com/>`_,
 `Media Redundancy Protocol (MRP) LC mode
 <https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com>`_,
 `IEEE 802.1X port authentication
 <https://lore.kernel.org/netdev/20220218155148.2329797-1-schultz.hans+netdev@gmail.com/>`_,
 and `MAC Authentication Bypass (MAB)
 <https://lore.kernel.org/netdev/20221101193922.2125323-2-idosch@nvidia.com/>`_.

 FAQ
 ===

 What does a bridge do?
 ----------------------

 A bridge transparently forwards traffic between multiple network interfaces.
 In plain English this means that a bridge connects two or more physical
 Ethernet networks, to form one larger (logical) Ethernet network.

 Is it L3 protocol independent?
 ------------------------------

 Yes. The bridge sees all frames, but it *uses* only L2 headers/information.
 As such, the bridging functionality is protocol independent, and there should
 be no trouble forwarding IPX, NetBEUI, IP, IPv6, etc.

 Contact Info
 ============

 The code is currently maintained by Roopa Prabhu <roopa@nvidia.com> and
 Nikolay Aleksandrov <razor@blackwall.org>. Bridge bugs and enhancements
 are discussed on the linux-netdev mailing list netdev@vger.kernel.org and
 bridge@lists.linux.dev.

 The list is open to anyone interested: http://vger.kernel.org/vger-lists.html#netdev

 External Links
 ==============

 The old Documentation for Linux bridging is on:
 https://wiki.linuxfoundation.org/networking/bridge
	.. SPDX-License-Identifier: GPL-2.0

	=================
	Ethernet Bridging
	=================

	Introduction
	============

	The IEEE 802.1Q-2022 (Bridges and Bridged Networks) standard defines the
	operation of bridges in computer networks. A bridge, in the context of this
	standard, is a device that connects two or more network segments and operates
	at the data link layer (Layer 2) of the OSI (Open Systems Interconnection)
	model. The purpose of a bridge is to filter and forward frames between
	different segments based on the destination MAC (Media Access Control) address.

	Bridge kAPI
	===========

	Here are some core structures of bridge code. Note that the kAPI is unstable,
	and can be changed at any time.

	.. kernel-doc:: net/bridge/br_private.h
	:identifiers: net_bridge_vlan

	Bridge uAPI
	===========

	Modern Linux bridge uAPI is accessed via Netlink interface. You can find
	below files where the bridge and bridge port netlink attributes are defined.

	Bridge netlink attributes
	-------------------------

	.. kernel-doc:: include/uapi/linux/if_link.h
	:doc: Bridge enum definition

	Bridge port netlink attributes
	------------------------------

	.. kernel-doc:: include/uapi/linux/if_link.h
	:doc: Bridge port enum definition

	Bridge sysfs
	------------

	The sysfs interface is deprecated and should not be extended if new
	options are added.

	STP
	===

	The STP (Spanning Tree Protocol) implementation in the Linux bridge driver
	is a critical feature that helps prevent loops and broadcast storms in
	Ethernet networks by identifying and disabling redundant links. In a Linux
	bridge context, STP is crucial for network stability and availability.

	STP is a Layer 2 protocol that operates at the Data Link Layer of the OSI
	model. It was originally developed as IEEE 802.1D and has since evolved into
	multiple versions, including Rapid Spanning Tree Protocol (RSTP) and
	`Multiple Spanning Tree Protocol (MSTP)
	<https://lore.kernel.org/netdev/20220316150857.2442916-1-tobias@waldekranz.com/>`_.

	The 802.1D-2004 removed the original Spanning Tree Protocol, instead
	incorporating the Rapid Spanning Tree Protocol (RSTP). By 2014, all the
	functionality defined by IEEE 802.1D has been incorporated into either
	IEEE 802.1Q (Bridges and Bridged Networks) or IEEE 802.1AC (MAC Service
	Definition). 802.1D has been officially withdrawn in 2022.

	Bridge Ports and STP States
	---------------------------

	In the context of STP, bridge ports can be in one of the following states:
	* Blocking: The port is disabled for data traffic and only listens for
	BPDUs (Bridge Protocol Data Units) from other devices to determine the
	network topology.
	* Listening: The port begins to participate in the STP process and listens
	for BPDUs.
	* Learning: The port continues to listen for BPDUs and begins to learn MAC
	addresses from incoming frames but does not forward data frames.
	* Forwarding: The port is fully operational and forwards both BPDUs and
	data frames.
	* Disabled: The port is administratively disabled and does not participate
	in the STP process. The data frames forwarding are also disabled.

	Root Bridge and Convergence
	---------------------------

	In the context of networking and Ethernet bridging in Linux, the root bridge
	is a designated switch in a bridged network that serves as a reference point
	for the spanning tree algorithm to create a loop-free topology.

	Here's how the STP works and root bridge is chosen:
	1. Bridge Priority: Each bridge running a spanning tree protocol, has a
	configurable Bridge Priority value. The lower the value, the higher the
	priority. By default, the Bridge Priority is set to a standard value
	(e.g., 32768).
	2. Bridge ID: The Bridge ID is composed of two components: Bridge Priority
	and the MAC address of the bridge. It uniquely identifies each bridge
	in the network. The Bridge ID is used to compare the priorities of
	different bridges.
	3. Bridge Election: When the network starts, all bridges initially assume
	that they are the root bridge. They start advertising Bridge Protocol
	Data Units (BPDU) to their neighbors, containing their Bridge ID and
	other information.
	4. BPDU Comparison: Bridges exchange BPDUs to determine the root bridge.
	Each bridge examines the received BPDUs, including the Bridge Priority
	and Bridge ID, to determine if it should adjust its own priorities.
	The bridge with the lowest Bridge ID will become the root bridge.
	5. Root Bridge Announcement: Once the root bridge is determined, it sends
	BPDUs with information about the root bridge to all other bridges in the
	network. This information is used by other bridges to calculate the
	shortest path to the root bridge and, in doing so, create a loop-free
	topology.
	6. Forwarding Ports: After the root bridge is selected and the spanning tree
	topology is established, each bridge determines which of its ports should
	be in the forwarding state (used for data traffic) and which should be in
	the blocking state (used to prevent loops). The root bridge's ports are
	all in the forwarding state. while other bridges have some ports in the
	blocking state to avoid loops.
	7. Root Ports: After the root bridge is selected and the spanning tree
	topology is established, each non-root bridge processes incoming
	BPDUs and determines which of its ports provides the shortest path to the
	root bridge based on the information in the received BPDUs. This port is
	designated as the root port. And it is in the Forwarding state, allowing
	it to actively forward network traffic.
	8. Designated ports: A designated port is the port through which the non-root
	bridge will forward traffic towards the designated segment. Designated ports
	are placed in the Forwarding state. All other ports on the non-root
	bridge that are not designated for specific segments are placed in the
	Blocking state to prevent network loops.

	STP ensures network convergence by calculating the shortest path and disabling
	redundant links. When network topology changes occur (e.g., a link failure),
	STP recalculates the network topology to restore connectivity while avoiding loops.

	Proper configuration of STP parameters, such as the bridge priority, can
	influence network performance, path selection and which bridge becomes the
	Root Bridge.

	User space STP helper
	---------------------

	The user space STP helper bridge-stp is a program to control whether to use
	user mode spanning tree. The ``/sbin/bridge-stp <bridge> <start\|stop>`` is
	called by the kernel when STP is enabled/disabled on a bridge
	(via ``brctl stp <bridge> <on\|off>`` or ``ip link set <bridge> type bridge
	stp_state <0\|1>``). The kernel enables user_stp mode if that command returns
	0, or enables kernel_stp mode if that command returns any other value.

	VLAN
	====

	A LAN (Local Area Network) is a network that covers a small geographic area,
	typically within a single building or a campus. LANs are used to connect
	computers, servers, printers, and other networked devices within a localized
	area. LANs can be wired (using Ethernet cables) or wireless (using Wi-Fi).

	A VLAN (Virtual Local Area Network) is a logical segmentation of a physical
	network into multiple isolated broadcast domains. VLANs are used to divide
	a single physical LAN into multiple virtual LANs, allowing different groups of
	devices to communicate as if they were on separate physical networks.

	Typically there are two VLAN implementations, IEEE 802.1Q and IEEE 802.1ad
	(also known as QinQ). IEEE 802.1Q is a standard for VLAN tagging in Ethernet
	networks. It allows network administrators to create logical VLANs on a
	physical network and tag Ethernet frames with VLAN information, which is
	called VLAN-tagged frames. IEEE 802.1ad, commonly known as QinQ or Double
	VLAN, is an extension of the IEEE 802.1Q standard. QinQ allows for the
	stacking of multiple VLAN tags within a single Ethernet frame. The Linux
	bridge supports both the IEEE 802.1Q and `802.1AD
	<https://lore.kernel.org/netdev/1402401565-15423-1-git-send-email-makita.toshiaki@lab.ntt.co.jp/>`_
	protocol for VLAN tagging.

	`VLAN filtering <https://lore.kernel.org/netdev/1360792820-14116-1-git-send-email-vyasevic@redhat.com/>`_
	on a bridge is disabled by default. After enabling VLAN filtering on a bridge,
	it will start forwarding frames to appropriate destinations based on their
	destination MAC address and VLAN tag (both must match).

	Multicast
	=========

	The Linux bridge driver has multicast support allowing it to process Internet
	Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD)
	messages, and to efficiently forward multicast data packets. The bridge
	driver supports IGMPv2/IGMPv3 and MLDv1/MLDv2.

	Multicast snooping
	------------------

	Multicast snooping is a networking technology that allows network switches
	to intelligently manage multicast traffic within a local area network (LAN).

	The switch maintains a multicast group table, which records the association
	between multicast group addresses and the ports where hosts have joined these
	groups. The group table is dynamically updated based on the IGMP/MLD messages
	received. With the multicast group information gathered through snooping, the
	switch optimizes the forwarding of multicast traffic. Instead of blindly
	broadcasting the multicast traffic to all ports, it sends the multicast
	traffic based on the destination MAC address only to ports which have
	subscribed the respective destination multicast group.

	When created, the Linux bridge devices have multicast snooping enabled by
	default. It maintains a Multicast forwarding database (MDB) which keeps track
	of port and group relationships.

	IGMPv3/MLDv2 EHT support
	------------------------

	The Linux bridge supports IGMPv3/MLDv2 EHT (Explicit Host Tracking), which
	was added by `474ddb37fa3a ("net: bridge: multicast: add EHT allow/block handling")
	<https://lore.kernel.org/netdev/20210120145203.1109140-1-razor@blackwall.org/>`_

	The explicit host tracking enables the device to keep track of each
	individual host that is joined to a particular group or channel. The main
	benefit of the explicit host tracking in IGMP is to allow minimal leave
	latencies when a host leaves a multicast group or channel.

	The length of time between a host wanting to leave and a device stopping
	traffic forwarding is called the IGMP leave latency. A device configured
	with IGMPv3 or MLDv2 and explicit tracking can immediately stop forwarding
	traffic if the last host to request to receive traffic from the device
	indicates that it no longer wants to receive traffic. The leave latency
	is thus bound only by the packet transmission latencies in the multiaccess
	network and the processing time in the device.

	Other multicast features
	------------------------

	The Linux bridge also supports `per-VLAN multicast snooping
	<https://lore.kernel.org/netdev/20210719170637.435541-1-razor@blackwall.org/>`_,
	which is disabled by default but can be enabled. And `Multicast Router Discovery
	<https://lore.kernel.org/netdev/20190121062628.2710-1-linus.luessing@c0d3.blue/>`_,
	which help identify the location of multicast routers.

	Switchdev
	=========

	Linux Bridge Switchdev is a feature in the Linux kernel that extends the
	capabilities of the traditional Linux bridge to work more efficiently with
	hardware switches that support switchdev. With Linux Bridge Switchdev, certain
	networking functions like forwarding, filtering, and learning of Ethernet
	frames can be offloaded to a hardware switch. This offloading reduces the
	burden on the Linux kernel and CPU, leading to improved network performance
	and lower latency.

	To use Linux Bridge Switchdev, you need hardware switches that support the
	switchdev interface. This means that the switch hardware needs to have the
	necessary drivers and functionality to work in conjunction with the Linux
	kernel.

	Please see the :ref:`switchdev` document for more details.

	Netfilter
	=========

	The bridge netfilter module is a legacy feature that allows to filter bridged
	packets with iptables and ip6tables. Its use is discouraged. Users should
	consider using nftables for packet filtering.

	The older ebtables tool is more feature-limited compared to nftables, but
	just like nftables it doesn't need this module either to function.

	The br_netfilter module intercepts packets entering the bridge, performs
	minimal sanity tests on ipv4 and ipv6 packets and then pretends that
	these packets are being routed, not bridged. br_netfilter then calls
	the ip and ipv6 netfilter hooks from the bridge layer, i.e. ip(6)tables
	rulesets will also see these packets.

	br_netfilter is also the reason for the iptables physdev match:
	This match is the only way to reliably tell routed and bridged packets
	apart in an iptables ruleset.

	Note that ebtables and nftables will work fine without the br_netfilter module.
	iptables/ip6tables/arptables do not work for bridged traffic because they
	plug in the routing stack. nftables rules in ip/ip6/inet/arp families won't
	see traffic that is forwarded by a bridge either, but that's very much how it
	should be.

	Historically the feature set of ebtables was very limited (it still is),
	this module was added to pretend packets are routed and invoke the ipv4/ipv6
	netfilter hooks from the bridge so users had access to the more feature-rich
	iptables matching capabilities (including conntrack). nftables doesn't have
	this limitation, pretty much all features work regardless of the protocol family.

	So, br_netfilter is only needed if users, for some reason, need to use
	ip(6)tables to filter packets forwarded by the bridge, or NAT bridged
	traffic. For pure link layer filtering, this module isn't needed.

	Other Features
	==============

	The Linux bridge also supports `IEEE 802.11 Proxy ARP
	<https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=958501163ddd6ea22a98f94fa0e7ce6d4734e5c4>`_,
	`Media Redundancy Protocol (MRP)
	<https://lore.kernel.org/netdev/20200426132208.3232-1-horatiu.vultur@microchip.com/>`_,
	`Media Redundancy Protocol (MRP) LC mode
	<https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com>`_,
	`IEEE 802.1X port authentication
	<https://lore.kernel.org/netdev/20220218155148.2329797-1-schultz.hans+netdev@gmail.com/>`_,
	and `MAC Authentication Bypass (MAB)
	<https://lore.kernel.org/netdev/20221101193922.2125323-2-idosch@nvidia.com/>`_.

	FAQ
	===

	What does a bridge do?
	----------------------

	A bridge transparently forwards traffic between multiple network interfaces.
	In plain English this means that a bridge connects two or more physical
	Ethernet networks, to form one larger (logical) Ethernet network.

	Is it L3 protocol independent?
	------------------------------

	Yes. The bridge sees all frames, but it uses only L2 headers/information.
	As such, the bridging functionality is protocol independent, and there should
	be no trouble forwarding IPX, NetBEUI, IP, IPv6, etc.

	Contact Info
	============

	The code is currently maintained by Roopa Prabhu <roopa@nvidia.com> and
	Nikolay Aleksandrov <razor@blackwall.org>. Bridge bugs and enhancements
	are discussed on the linux-netdev mailing list netdev@vger.kernel.org and
	bridge@lists.linux.dev.

	The list is open to anyone interested: http://vger.kernel.org/vger-lists.html#netdev

	External Links
	==============

	The old Documentation for Linux bridging is on:
	https://wiki.linuxfoundation.org/networking/bridge