|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * video-i2c.c - Support for I2C transport video devices | 
|  | * | 
|  | * Copyright (C) 2018 Matt Ranostay <matt.ranostay@konsulko.com> | 
|  | * | 
|  | * Supported: | 
|  | * - Panasonic AMG88xx Grid-Eye Sensors | 
|  | * - Melexis MLX90640 Thermal Cameras | 
|  | */ | 
|  |  | 
|  | #include <linux/bits.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/mod_devicetable.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/nvmem-provider.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/videodev2.h> | 
|  | #include <media/v4l2-common.h> | 
|  | #include <media/v4l2-device.h> | 
|  | #include <media/v4l2-event.h> | 
|  | #include <media/v4l2-fh.h> | 
|  | #include <media/v4l2-ioctl.h> | 
|  | #include <media/videobuf2-v4l2.h> | 
|  | #include <media/videobuf2-vmalloc.h> | 
|  |  | 
|  | #define VIDEO_I2C_DRIVER	"video-i2c" | 
|  |  | 
|  | /* Power control register */ | 
|  | #define AMG88XX_REG_PCTL	0x00 | 
|  | #define AMG88XX_PCTL_NORMAL		0x00 | 
|  | #define AMG88XX_PCTL_SLEEP		0x10 | 
|  |  | 
|  | /* Reset register */ | 
|  | #define AMG88XX_REG_RST		0x01 | 
|  | #define AMG88XX_RST_FLAG		0x30 | 
|  | #define AMG88XX_RST_INIT		0x3f | 
|  |  | 
|  | /* Frame rate register */ | 
|  | #define AMG88XX_REG_FPSC	0x02 | 
|  | #define AMG88XX_FPSC_1FPS		BIT(0) | 
|  |  | 
|  | /* Thermistor register */ | 
|  | #define AMG88XX_REG_TTHL	0x0e | 
|  |  | 
|  | /* Temperature register */ | 
|  | #define AMG88XX_REG_T01L	0x80 | 
|  |  | 
|  | /* RAM */ | 
|  | #define MLX90640_RAM_START_ADDR		0x0400 | 
|  |  | 
|  | /* EEPROM */ | 
|  | #define MLX90640_EEPROM_START_ADDR	0x2400 | 
|  |  | 
|  | /* Control register */ | 
|  | #define MLX90640_REG_CTL1		0x800d | 
|  | #define MLX90640_REG_CTL1_MASK		GENMASK(9, 7) | 
|  | #define MLX90640_REG_CTL1_MASK_SHIFT	7 | 
|  |  | 
|  | struct video_i2c_chip; | 
|  |  | 
|  | struct video_i2c_buffer { | 
|  | struct vb2_v4l2_buffer vb; | 
|  | struct list_head list; | 
|  | }; | 
|  |  | 
|  | struct video_i2c_data { | 
|  | struct regmap *regmap; | 
|  | const struct video_i2c_chip *chip; | 
|  | struct mutex lock; | 
|  | spinlock_t slock; | 
|  | unsigned int sequence; | 
|  | struct mutex queue_lock; | 
|  |  | 
|  | struct v4l2_device v4l2_dev; | 
|  | struct video_device vdev; | 
|  | struct vb2_queue vb_vidq; | 
|  |  | 
|  | struct task_struct *kthread_vid_cap; | 
|  | struct list_head vid_cap_active; | 
|  |  | 
|  | struct v4l2_fract frame_interval; | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_fmtdesc amg88xx_format = { | 
|  | .pixelformat = V4L2_PIX_FMT_Y12, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_frmsize_discrete amg88xx_size = { | 
|  | .width = 8, | 
|  | .height = 8, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_fmtdesc mlx90640_format = { | 
|  | .pixelformat = V4L2_PIX_FMT_Y16_BE, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_frmsize_discrete mlx90640_size = { | 
|  | .width = 32, | 
|  | .height = 26, /* 24 lines of pixel data + 2 lines of processing data */ | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config amg88xx_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config mlx90640_regmap_config = { | 
|  | .reg_bits = 16, | 
|  | .val_bits = 16, | 
|  | }; | 
|  |  | 
|  | struct video_i2c_chip { | 
|  | /* video dimensions */ | 
|  | const struct v4l2_fmtdesc *format; | 
|  | const struct v4l2_frmsize_discrete *size; | 
|  |  | 
|  | /* available frame intervals */ | 
|  | const struct v4l2_fract *frame_intervals; | 
|  | unsigned int num_frame_intervals; | 
|  |  | 
|  | /* pixel buffer size */ | 
|  | unsigned int buffer_size; | 
|  |  | 
|  | /* pixel size in bits */ | 
|  | unsigned int bpp; | 
|  |  | 
|  | const struct regmap_config *regmap_config; | 
|  | struct nvmem_config *nvmem_config; | 
|  |  | 
|  | /* setup function */ | 
|  | int (*setup)(struct video_i2c_data *data); | 
|  |  | 
|  | /* xfer function */ | 
|  | int (*xfer)(struct video_i2c_data *data, char *buf); | 
|  |  | 
|  | /* power control function */ | 
|  | int (*set_power)(struct video_i2c_data *data, bool on); | 
|  |  | 
|  | /* hwmon init function */ | 
|  | int (*hwmon_init)(struct video_i2c_data *data); | 
|  | }; | 
|  |  | 
|  | static int mlx90640_nvram_read(void *priv, unsigned int offset, void *val, | 
|  | size_t bytes) | 
|  | { | 
|  | struct video_i2c_data *data = priv; | 
|  |  | 
|  | return regmap_bulk_read(data->regmap, MLX90640_EEPROM_START_ADDR + offset, val, bytes); | 
|  | } | 
|  |  | 
|  | static struct nvmem_config mlx90640_nvram_config = { | 
|  | .name = "mlx90640_nvram", | 
|  | .word_size = 2, | 
|  | .stride = 1, | 
|  | .size = 1664, | 
|  | .reg_read = mlx90640_nvram_read, | 
|  | }; | 
|  |  | 
|  | static int amg88xx_xfer(struct video_i2c_data *data, char *buf) | 
|  | { | 
|  | return regmap_bulk_read(data->regmap, AMG88XX_REG_T01L, buf, | 
|  | data->chip->buffer_size); | 
|  | } | 
|  |  | 
|  | static int mlx90640_xfer(struct video_i2c_data *data, char *buf) | 
|  | { | 
|  | return regmap_bulk_read(data->regmap, MLX90640_RAM_START_ADDR, buf, | 
|  | data->chip->buffer_size); | 
|  | } | 
|  |  | 
|  | static int amg88xx_setup(struct video_i2c_data *data) | 
|  | { | 
|  | unsigned int mask = AMG88XX_FPSC_1FPS; | 
|  | unsigned int val; | 
|  |  | 
|  | if (data->frame_interval.numerator == data->frame_interval.denominator) | 
|  | val = mask; | 
|  | else | 
|  | val = 0; | 
|  |  | 
|  | return regmap_update_bits(data->regmap, AMG88XX_REG_FPSC, mask, val); | 
|  | } | 
|  |  | 
|  | static int mlx90640_setup(struct video_i2c_data *data) | 
|  | { | 
|  | unsigned int n, idx; | 
|  |  | 
|  | for (n = 0; n < data->chip->num_frame_intervals - 1; n++) { | 
|  | if (V4L2_FRACT_COMPARE(data->frame_interval, ==, | 
|  | data->chip->frame_intervals[n])) | 
|  | break; | 
|  | } | 
|  |  | 
|  | idx = data->chip->num_frame_intervals - n - 1; | 
|  |  | 
|  | return regmap_update_bits(data->regmap, MLX90640_REG_CTL1, | 
|  | MLX90640_REG_CTL1_MASK, | 
|  | idx << MLX90640_REG_CTL1_MASK_SHIFT); | 
|  | } | 
|  |  | 
|  | static int amg88xx_set_power_on(struct video_i2c_data *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_write(data->regmap, AMG88XX_REG_PCTL, AMG88XX_PCTL_NORMAL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | msleep(50); | 
|  |  | 
|  | ret = regmap_write(data->regmap, AMG88XX_REG_RST, AMG88XX_RST_INIT); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | usleep_range(2000, 3000); | 
|  |  | 
|  | ret = regmap_write(data->regmap, AMG88XX_REG_RST, AMG88XX_RST_FLAG); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * Wait two frames before reading thermistor and temperature registers | 
|  | */ | 
|  | msleep(200); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int amg88xx_set_power_off(struct video_i2c_data *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_write(data->regmap, AMG88XX_REG_PCTL, AMG88XX_PCTL_SLEEP); | 
|  | if (ret) | 
|  | return ret; | 
|  | /* | 
|  | * Wait for a while to avoid resuming normal mode immediately after | 
|  | * entering sleep mode, otherwise the device occasionally goes wrong | 
|  | * (thermistor and temperature registers are not updated at all) | 
|  | */ | 
|  | msleep(100); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int amg88xx_set_power(struct video_i2c_data *data, bool on) | 
|  | { | 
|  | if (on) | 
|  | return amg88xx_set_power_on(data); | 
|  |  | 
|  | return amg88xx_set_power_off(data); | 
|  | } | 
|  |  | 
|  | #if IS_REACHABLE(CONFIG_HWMON) | 
|  |  | 
|  | static const u32 amg88xx_temp_config[] = { | 
|  | HWMON_T_INPUT, | 
|  | 0 | 
|  | }; | 
|  |  | 
|  | static const struct hwmon_channel_info amg88xx_temp = { | 
|  | .type = hwmon_temp, | 
|  | .config = amg88xx_temp_config, | 
|  | }; | 
|  |  | 
|  | static const struct hwmon_channel_info * const amg88xx_info[] = { | 
|  | &amg88xx_temp, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static umode_t amg88xx_is_visible(const void *drvdata, | 
|  | enum hwmon_sensor_types type, | 
|  | u32 attr, int channel) | 
|  | { | 
|  | return 0444; | 
|  | } | 
|  |  | 
|  | static int amg88xx_read(struct device *dev, enum hwmon_sensor_types type, | 
|  | u32 attr, int channel, long *val) | 
|  | { | 
|  | struct video_i2c_data *data = dev_get_drvdata(dev); | 
|  | __le16 buf; | 
|  | int tmp; | 
|  |  | 
|  | tmp = pm_runtime_resume_and_get(regmap_get_device(data->regmap)); | 
|  | if (tmp < 0) | 
|  | return tmp; | 
|  |  | 
|  | tmp = regmap_bulk_read(data->regmap, AMG88XX_REG_TTHL, &buf, 2); | 
|  | pm_runtime_mark_last_busy(regmap_get_device(data->regmap)); | 
|  | pm_runtime_put_autosuspend(regmap_get_device(data->regmap)); | 
|  | if (tmp) | 
|  | return tmp; | 
|  |  | 
|  | tmp = le16_to_cpu(buf); | 
|  |  | 
|  | /* | 
|  | * Check for sign bit, this isn't a two's complement value but an | 
|  | * absolute temperature that needs to be inverted in the case of being | 
|  | * negative. | 
|  | */ | 
|  | if (tmp & BIT(11)) | 
|  | tmp = -(tmp & 0x7ff); | 
|  |  | 
|  | *val = (tmp * 625) / 10; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct hwmon_ops amg88xx_hwmon_ops = { | 
|  | .is_visible = amg88xx_is_visible, | 
|  | .read = amg88xx_read, | 
|  | }; | 
|  |  | 
|  | static const struct hwmon_chip_info amg88xx_chip_info = { | 
|  | .ops = &amg88xx_hwmon_ops, | 
|  | .info = amg88xx_info, | 
|  | }; | 
|  |  | 
|  | static int amg88xx_hwmon_init(struct video_i2c_data *data) | 
|  | { | 
|  | struct device *dev = regmap_get_device(data->regmap); | 
|  | void *hwmon = devm_hwmon_device_register_with_info(dev, "amg88xx", data, | 
|  | &amg88xx_chip_info, NULL); | 
|  |  | 
|  | return PTR_ERR_OR_ZERO(hwmon); | 
|  | } | 
|  | #else | 
|  | #define	amg88xx_hwmon_init	NULL | 
|  | #endif | 
|  |  | 
|  | enum { | 
|  | AMG88XX, | 
|  | MLX90640, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_fract amg88xx_frame_intervals[] = { | 
|  | { 1, 10 }, | 
|  | { 1, 1 }, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_fract mlx90640_frame_intervals[] = { | 
|  | { 1, 64 }, | 
|  | { 1, 32 }, | 
|  | { 1, 16 }, | 
|  | { 1, 8 }, | 
|  | { 1, 4 }, | 
|  | { 1, 2 }, | 
|  | { 1, 1 }, | 
|  | { 2, 1 }, | 
|  | }; | 
|  |  | 
|  | static const struct video_i2c_chip video_i2c_chip[] = { | 
|  | [AMG88XX] = { | 
|  | .size		= &amg88xx_size, | 
|  | .format		= &amg88xx_format, | 
|  | .frame_intervals	= amg88xx_frame_intervals, | 
|  | .num_frame_intervals	= ARRAY_SIZE(amg88xx_frame_intervals), | 
|  | .buffer_size	= 128, | 
|  | .bpp		= 16, | 
|  | .regmap_config	= &amg88xx_regmap_config, | 
|  | .setup		= &amg88xx_setup, | 
|  | .xfer		= &amg88xx_xfer, | 
|  | .set_power	= amg88xx_set_power, | 
|  | .hwmon_init	= amg88xx_hwmon_init, | 
|  | }, | 
|  | [MLX90640] = { | 
|  | .size		= &mlx90640_size, | 
|  | .format		= &mlx90640_format, | 
|  | .frame_intervals	= mlx90640_frame_intervals, | 
|  | .num_frame_intervals	= ARRAY_SIZE(mlx90640_frame_intervals), | 
|  | .buffer_size	= 1664, | 
|  | .bpp		= 16, | 
|  | .regmap_config	= &mlx90640_regmap_config, | 
|  | .nvmem_config	= &mlx90640_nvram_config, | 
|  | .setup		= mlx90640_setup, | 
|  | .xfer		= mlx90640_xfer, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_file_operations video_i2c_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= v4l2_fh_open, | 
|  | .release	= vb2_fop_release, | 
|  | .poll		= vb2_fop_poll, | 
|  | .read		= vb2_fop_read, | 
|  | .mmap		= vb2_fop_mmap, | 
|  | .unlocked_ioctl = video_ioctl2, | 
|  | }; | 
|  |  | 
|  | static int queue_setup(struct vb2_queue *vq, | 
|  | unsigned int *nbuffers, unsigned int *nplanes, | 
|  | unsigned int sizes[], struct device *alloc_devs[]) | 
|  | { | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vq); | 
|  | unsigned int size = data->chip->buffer_size; | 
|  | unsigned int q_num_bufs = vb2_get_num_buffers(vq); | 
|  |  | 
|  | if (q_num_bufs + *nbuffers < 2) | 
|  | *nbuffers = 2 - q_num_bufs; | 
|  |  | 
|  | if (*nplanes) | 
|  | return sizes[0] < size ? -EINVAL : 0; | 
|  |  | 
|  | *nplanes = 1; | 
|  | sizes[0] = size; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int buffer_prepare(struct vb2_buffer *vb) | 
|  | { | 
|  | struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue); | 
|  | unsigned int size = data->chip->buffer_size; | 
|  |  | 
|  | if (vb2_plane_size(vb, 0) < size) | 
|  | return -EINVAL; | 
|  |  | 
|  | vbuf->field = V4L2_FIELD_NONE; | 
|  | vb2_set_plane_payload(vb, 0, size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void buffer_queue(struct vb2_buffer *vb) | 
|  | { | 
|  | struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue); | 
|  | struct video_i2c_buffer *buf = | 
|  | container_of(vbuf, struct video_i2c_buffer, vb); | 
|  |  | 
|  | spin_lock(&data->slock); | 
|  | list_add_tail(&buf->list, &data->vid_cap_active); | 
|  | spin_unlock(&data->slock); | 
|  | } | 
|  |  | 
|  | static int video_i2c_thread_vid_cap(void *priv) | 
|  | { | 
|  | struct video_i2c_data *data = priv; | 
|  | u32 delay = mult_frac(1000000UL, data->frame_interval.numerator, | 
|  | data->frame_interval.denominator); | 
|  | s64 end_us = ktime_to_us(ktime_get()); | 
|  |  | 
|  | set_freezable(); | 
|  |  | 
|  | do { | 
|  | struct video_i2c_buffer *vid_cap_buf = NULL; | 
|  | s64 current_us; | 
|  | int schedule_delay; | 
|  |  | 
|  | try_to_freeze(); | 
|  |  | 
|  | spin_lock(&data->slock); | 
|  |  | 
|  | if (!list_empty(&data->vid_cap_active)) { | 
|  | vid_cap_buf = list_last_entry(&data->vid_cap_active, | 
|  | struct video_i2c_buffer, list); | 
|  | list_del(&vid_cap_buf->list); | 
|  | } | 
|  |  | 
|  | spin_unlock(&data->slock); | 
|  |  | 
|  | if (vid_cap_buf) { | 
|  | struct vb2_buffer *vb2_buf = &vid_cap_buf->vb.vb2_buf; | 
|  | void *vbuf = vb2_plane_vaddr(vb2_buf, 0); | 
|  | int ret; | 
|  |  | 
|  | ret = data->chip->xfer(data, vbuf); | 
|  | vb2_buf->timestamp = ktime_get_ns(); | 
|  | vid_cap_buf->vb.sequence = data->sequence++; | 
|  | vb2_buffer_done(vb2_buf, ret ? | 
|  | VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); | 
|  | } | 
|  |  | 
|  | end_us += delay; | 
|  | current_us = ktime_to_us(ktime_get()); | 
|  | if (current_us < end_us) { | 
|  | schedule_delay = end_us - current_us; | 
|  | usleep_range(schedule_delay * 3 / 4, schedule_delay); | 
|  | } else { | 
|  | end_us = current_us; | 
|  | } | 
|  | } while (!kthread_should_stop()); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void video_i2c_del_list(struct vb2_queue *vq, enum vb2_buffer_state state) | 
|  | { | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vq); | 
|  | struct video_i2c_buffer *buf, *tmp; | 
|  |  | 
|  | spin_lock(&data->slock); | 
|  |  | 
|  | list_for_each_entry_safe(buf, tmp, &data->vid_cap_active, list) { | 
|  | list_del(&buf->list); | 
|  | vb2_buffer_done(&buf->vb.vb2_buf, state); | 
|  | } | 
|  |  | 
|  | spin_unlock(&data->slock); | 
|  | } | 
|  |  | 
|  | static int start_streaming(struct vb2_queue *vq, unsigned int count) | 
|  | { | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vq); | 
|  | struct device *dev = regmap_get_device(data->regmap); | 
|  | int ret; | 
|  |  | 
|  | if (data->kthread_vid_cap) | 
|  | return 0; | 
|  |  | 
|  | ret = pm_runtime_resume_and_get(dev); | 
|  | if (ret < 0) | 
|  | goto error_del_list; | 
|  |  | 
|  | ret = data->chip->setup(data); | 
|  | if (ret) | 
|  | goto error_rpm_put; | 
|  |  | 
|  | data->sequence = 0; | 
|  | data->kthread_vid_cap = kthread_run(video_i2c_thread_vid_cap, data, | 
|  | "%s-vid-cap", data->v4l2_dev.name); | 
|  | ret = PTR_ERR_OR_ZERO(data->kthread_vid_cap); | 
|  | if (!ret) | 
|  | return 0; | 
|  |  | 
|  | error_rpm_put: | 
|  | pm_runtime_mark_last_busy(dev); | 
|  | pm_runtime_put_autosuspend(dev); | 
|  | error_del_list: | 
|  | video_i2c_del_list(vq, VB2_BUF_STATE_QUEUED); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void stop_streaming(struct vb2_queue *vq) | 
|  | { | 
|  | struct video_i2c_data *data = vb2_get_drv_priv(vq); | 
|  |  | 
|  | if (data->kthread_vid_cap == NULL) | 
|  | return; | 
|  |  | 
|  | kthread_stop(data->kthread_vid_cap); | 
|  | data->kthread_vid_cap = NULL; | 
|  | pm_runtime_mark_last_busy(regmap_get_device(data->regmap)); | 
|  | pm_runtime_put_autosuspend(regmap_get_device(data->regmap)); | 
|  |  | 
|  | video_i2c_del_list(vq, VB2_BUF_STATE_ERROR); | 
|  | } | 
|  |  | 
|  | static const struct vb2_ops video_i2c_video_qops = { | 
|  | .queue_setup		= queue_setup, | 
|  | .buf_prepare		= buffer_prepare, | 
|  | .buf_queue		= buffer_queue, | 
|  | .start_streaming	= start_streaming, | 
|  | .stop_streaming		= stop_streaming, | 
|  | .wait_prepare		= vb2_ops_wait_prepare, | 
|  | .wait_finish		= vb2_ops_wait_finish, | 
|  | }; | 
|  |  | 
|  | static int video_i2c_querycap(struct file *file, void  *priv, | 
|  | struct v4l2_capability *vcap) | 
|  | { | 
|  | struct video_i2c_data *data = video_drvdata(file); | 
|  | struct device *dev = regmap_get_device(data->regmap); | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | strscpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver)); | 
|  | strscpy(vcap->card, data->vdev.name, sizeof(vcap->card)); | 
|  |  | 
|  | sprintf(vcap->bus_info, "I2C:%d-%d", client->adapter->nr, client->addr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_g_input(struct file *file, void *fh, unsigned int *inp) | 
|  | { | 
|  | *inp = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_s_input(struct file *file, void *fh, unsigned int inp) | 
|  | { | 
|  | return (inp > 0) ? -EINVAL : 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_enum_input(struct file *file, void *fh, | 
|  | struct v4l2_input *vin) | 
|  | { | 
|  | if (vin->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | strscpy(vin->name, "Camera", sizeof(vin->name)); | 
|  |  | 
|  | vin->type = V4L2_INPUT_TYPE_CAMERA; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_enum_fmt_vid_cap(struct file *file, void *fh, | 
|  | struct v4l2_fmtdesc *fmt) | 
|  | { | 
|  | struct video_i2c_data *data = video_drvdata(file); | 
|  | enum v4l2_buf_type type = fmt->type; | 
|  |  | 
|  | if (fmt->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | *fmt = *data->chip->format; | 
|  | fmt->type = type; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_enum_framesizes(struct file *file, void *fh, | 
|  | struct v4l2_frmsizeenum *fsize) | 
|  | { | 
|  | const struct video_i2c_data *data = video_drvdata(file); | 
|  | const struct v4l2_frmsize_discrete *size = data->chip->size; | 
|  |  | 
|  | /* currently only one frame size is allowed */ | 
|  | if (fsize->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (fsize->pixel_format != data->chip->format->pixelformat) | 
|  | return -EINVAL; | 
|  |  | 
|  | fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; | 
|  | fsize->discrete.width = size->width; | 
|  | fsize->discrete.height = size->height; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_enum_frameintervals(struct file *file, void *priv, | 
|  | struct v4l2_frmivalenum *fe) | 
|  | { | 
|  | const struct video_i2c_data *data = video_drvdata(file); | 
|  | const struct v4l2_frmsize_discrete *size = data->chip->size; | 
|  |  | 
|  | if (fe->index >= data->chip->num_frame_intervals) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (fe->width != size->width || fe->height != size->height) | 
|  | return -EINVAL; | 
|  |  | 
|  | fe->type = V4L2_FRMIVAL_TYPE_DISCRETE; | 
|  | fe->discrete = data->chip->frame_intervals[fe->index]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_try_fmt_vid_cap(struct file *file, void *fh, | 
|  | struct v4l2_format *fmt) | 
|  | { | 
|  | const struct video_i2c_data *data = video_drvdata(file); | 
|  | const struct v4l2_frmsize_discrete *size = data->chip->size; | 
|  | struct v4l2_pix_format *pix = &fmt->fmt.pix; | 
|  | unsigned int bpp = data->chip->bpp / 8; | 
|  |  | 
|  | pix->width = size->width; | 
|  | pix->height = size->height; | 
|  | pix->pixelformat = data->chip->format->pixelformat; | 
|  | pix->field = V4L2_FIELD_NONE; | 
|  | pix->bytesperline = pix->width * bpp; | 
|  | pix->sizeimage = pix->bytesperline * pix->height; | 
|  | pix->colorspace = V4L2_COLORSPACE_RAW; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_s_fmt_vid_cap(struct file *file, void *fh, | 
|  | struct v4l2_format *fmt) | 
|  | { | 
|  | struct video_i2c_data *data = video_drvdata(file); | 
|  |  | 
|  | if (vb2_is_busy(&data->vb_vidq)) | 
|  | return -EBUSY; | 
|  |  | 
|  | return video_i2c_try_fmt_vid_cap(file, fh, fmt); | 
|  | } | 
|  |  | 
|  | static int video_i2c_g_parm(struct file *filp, void *priv, | 
|  | struct v4l2_streamparm *parm) | 
|  | { | 
|  | struct video_i2c_data *data = video_drvdata(filp); | 
|  |  | 
|  | if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | 
|  | return -EINVAL; | 
|  |  | 
|  | parm->parm.capture.readbuffers = 1; | 
|  | parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; | 
|  | parm->parm.capture.timeperframe = data->frame_interval; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int video_i2c_s_parm(struct file *filp, void *priv, | 
|  | struct v4l2_streamparm *parm) | 
|  | { | 
|  | struct video_i2c_data *data = video_drvdata(filp); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < data->chip->num_frame_intervals - 1; i++) { | 
|  | if (V4L2_FRACT_COMPARE(parm->parm.capture.timeperframe, <=, | 
|  | data->chip->frame_intervals[i])) | 
|  | break; | 
|  | } | 
|  | data->frame_interval = data->chip->frame_intervals[i]; | 
|  |  | 
|  | return video_i2c_g_parm(filp, priv, parm); | 
|  | } | 
|  |  | 
|  | static const struct v4l2_ioctl_ops video_i2c_ioctl_ops = { | 
|  | .vidioc_querycap		= video_i2c_querycap, | 
|  | .vidioc_g_input			= video_i2c_g_input, | 
|  | .vidioc_s_input			= video_i2c_s_input, | 
|  | .vidioc_enum_input		= video_i2c_enum_input, | 
|  | .vidioc_enum_fmt_vid_cap	= video_i2c_enum_fmt_vid_cap, | 
|  | .vidioc_enum_framesizes		= video_i2c_enum_framesizes, | 
|  | .vidioc_enum_frameintervals	= video_i2c_enum_frameintervals, | 
|  | .vidioc_g_fmt_vid_cap		= video_i2c_try_fmt_vid_cap, | 
|  | .vidioc_s_fmt_vid_cap		= video_i2c_s_fmt_vid_cap, | 
|  | .vidioc_g_parm			= video_i2c_g_parm, | 
|  | .vidioc_s_parm			= video_i2c_s_parm, | 
|  | .vidioc_try_fmt_vid_cap		= video_i2c_try_fmt_vid_cap, | 
|  | .vidioc_reqbufs			= vb2_ioctl_reqbufs, | 
|  | .vidioc_create_bufs		= vb2_ioctl_create_bufs, | 
|  | .vidioc_prepare_buf		= vb2_ioctl_prepare_buf, | 
|  | .vidioc_querybuf		= vb2_ioctl_querybuf, | 
|  | .vidioc_qbuf			= vb2_ioctl_qbuf, | 
|  | .vidioc_dqbuf			= vb2_ioctl_dqbuf, | 
|  | .vidioc_streamon		= vb2_ioctl_streamon, | 
|  | .vidioc_streamoff		= vb2_ioctl_streamoff, | 
|  | }; | 
|  |  | 
|  | static void video_i2c_release(struct video_device *vdev) | 
|  | { | 
|  | struct video_i2c_data *data = video_get_drvdata(vdev); | 
|  |  | 
|  | v4l2_device_unregister(&data->v4l2_dev); | 
|  | mutex_destroy(&data->lock); | 
|  | mutex_destroy(&data->queue_lock); | 
|  | regmap_exit(data->regmap); | 
|  | kfree(data); | 
|  | } | 
|  |  | 
|  | static int video_i2c_probe(struct i2c_client *client) | 
|  | { | 
|  | struct video_i2c_data *data; | 
|  | struct v4l2_device *v4l2_dev; | 
|  | struct vb2_queue *queue; | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | data = kzalloc(sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data->chip = i2c_get_match_data(client); | 
|  | if (!data->chip) | 
|  | goto error_free_device; | 
|  |  | 
|  | data->regmap = regmap_init_i2c(client, data->chip->regmap_config); | 
|  | if (IS_ERR(data->regmap)) { | 
|  | ret = PTR_ERR(data->regmap); | 
|  | goto error_free_device; | 
|  | } | 
|  |  | 
|  | v4l2_dev = &data->v4l2_dev; | 
|  | strscpy(v4l2_dev->name, VIDEO_I2C_DRIVER, sizeof(v4l2_dev->name)); | 
|  |  | 
|  | ret = v4l2_device_register(&client->dev, v4l2_dev); | 
|  | if (ret < 0) | 
|  | goto error_regmap_exit; | 
|  |  | 
|  | mutex_init(&data->lock); | 
|  | mutex_init(&data->queue_lock); | 
|  |  | 
|  | queue = &data->vb_vidq; | 
|  | queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | 
|  | queue->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR | VB2_READ; | 
|  | queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; | 
|  | queue->drv_priv = data; | 
|  | queue->buf_struct_size = sizeof(struct video_i2c_buffer); | 
|  | queue->min_queued_buffers = 1; | 
|  | queue->ops = &video_i2c_video_qops; | 
|  | queue->mem_ops = &vb2_vmalloc_memops; | 
|  |  | 
|  | ret = vb2_queue_init(queue); | 
|  | if (ret < 0) | 
|  | goto error_unregister_device; | 
|  |  | 
|  | data->vdev.queue = queue; | 
|  | data->vdev.queue->lock = &data->queue_lock; | 
|  |  | 
|  | snprintf(data->vdev.name, sizeof(data->vdev.name), | 
|  | "I2C %d-%d Transport Video", | 
|  | client->adapter->nr, client->addr); | 
|  |  | 
|  | data->vdev.v4l2_dev = v4l2_dev; | 
|  | data->vdev.fops = &video_i2c_fops; | 
|  | data->vdev.lock = &data->lock; | 
|  | data->vdev.ioctl_ops = &video_i2c_ioctl_ops; | 
|  | data->vdev.release = video_i2c_release; | 
|  | data->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | | 
|  | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; | 
|  |  | 
|  | spin_lock_init(&data->slock); | 
|  | INIT_LIST_HEAD(&data->vid_cap_active); | 
|  |  | 
|  | data->frame_interval = data->chip->frame_intervals[0]; | 
|  |  | 
|  | video_set_drvdata(&data->vdev, data); | 
|  | i2c_set_clientdata(client, data); | 
|  |  | 
|  | if (data->chip->set_power) { | 
|  | ret = data->chip->set_power(data, true); | 
|  | if (ret) | 
|  | goto error_unregister_device; | 
|  | } | 
|  |  | 
|  | pm_runtime_get_noresume(&client->dev); | 
|  | pm_runtime_set_active(&client->dev); | 
|  | pm_runtime_enable(&client->dev); | 
|  | pm_runtime_set_autosuspend_delay(&client->dev, 2000); | 
|  | pm_runtime_use_autosuspend(&client->dev); | 
|  |  | 
|  | if (data->chip->hwmon_init) { | 
|  | ret = data->chip->hwmon_init(data); | 
|  | if (ret < 0) { | 
|  | dev_warn(&client->dev, | 
|  | "failed to register hwmon device\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (data->chip->nvmem_config) { | 
|  | struct nvmem_config *config = data->chip->nvmem_config; | 
|  | struct nvmem_device *device; | 
|  |  | 
|  | config->priv = data; | 
|  | config->dev = &client->dev; | 
|  |  | 
|  | device = devm_nvmem_register(&client->dev, config); | 
|  |  | 
|  | if (IS_ERR(device)) { | 
|  | dev_warn(&client->dev, | 
|  | "failed to register nvmem device\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = video_register_device(&data->vdev, VFL_TYPE_VIDEO, -1); | 
|  | if (ret < 0) | 
|  | goto error_pm_disable; | 
|  |  | 
|  | pm_runtime_mark_last_busy(&client->dev); | 
|  | pm_runtime_put_autosuspend(&client->dev); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_pm_disable: | 
|  | pm_runtime_disable(&client->dev); | 
|  | pm_runtime_set_suspended(&client->dev); | 
|  | pm_runtime_put_noidle(&client->dev); | 
|  |  | 
|  | if (data->chip->set_power) | 
|  | data->chip->set_power(data, false); | 
|  |  | 
|  | error_unregister_device: | 
|  | v4l2_device_unregister(v4l2_dev); | 
|  | mutex_destroy(&data->lock); | 
|  | mutex_destroy(&data->queue_lock); | 
|  |  | 
|  | error_regmap_exit: | 
|  | regmap_exit(data->regmap); | 
|  |  | 
|  | error_free_device: | 
|  | kfree(data); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void video_i2c_remove(struct i2c_client *client) | 
|  | { | 
|  | struct video_i2c_data *data = i2c_get_clientdata(client); | 
|  |  | 
|  | pm_runtime_get_sync(&client->dev); | 
|  | pm_runtime_disable(&client->dev); | 
|  | pm_runtime_set_suspended(&client->dev); | 
|  | pm_runtime_put_noidle(&client->dev); | 
|  |  | 
|  | if (data->chip->set_power) | 
|  | data->chip->set_power(data, false); | 
|  |  | 
|  | video_unregister_device(&data->vdev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static int video_i2c_pm_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct video_i2c_data *data = i2c_get_clientdata(to_i2c_client(dev)); | 
|  |  | 
|  | if (!data->chip->set_power) | 
|  | return 0; | 
|  |  | 
|  | return data->chip->set_power(data, false); | 
|  | } | 
|  |  | 
|  | static int video_i2c_pm_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct video_i2c_data *data = i2c_get_clientdata(to_i2c_client(dev)); | 
|  |  | 
|  | if (!data->chip->set_power) | 
|  | return 0; | 
|  |  | 
|  | return data->chip->set_power(data, true); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops video_i2c_pm_ops = { | 
|  | SET_RUNTIME_PM_OPS(video_i2c_pm_runtime_suspend, | 
|  | video_i2c_pm_runtime_resume, NULL) | 
|  | }; | 
|  |  | 
|  | static const struct i2c_device_id video_i2c_id_table[] = { | 
|  | { "amg88xx", (kernel_ulong_t)&video_i2c_chip[AMG88XX] }, | 
|  | { "mlx90640", (kernel_ulong_t)&video_i2c_chip[MLX90640] }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, video_i2c_id_table); | 
|  |  | 
|  | static const struct of_device_id video_i2c_of_match[] = { | 
|  | { .compatible = "panasonic,amg88xx", .data = &video_i2c_chip[AMG88XX] }, | 
|  | { .compatible = "melexis,mlx90640", .data = &video_i2c_chip[MLX90640] }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, video_i2c_of_match); | 
|  |  | 
|  | static struct i2c_driver video_i2c_driver = { | 
|  | .driver = { | 
|  | .name	= VIDEO_I2C_DRIVER, | 
|  | .of_match_table = video_i2c_of_match, | 
|  | .pm	= &video_i2c_pm_ops, | 
|  | }, | 
|  | .probe		= video_i2c_probe, | 
|  | .remove		= video_i2c_remove, | 
|  | .id_table	= video_i2c_id_table, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(video_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); | 
|  | MODULE_DESCRIPTION("I2C transport video support"); | 
|  | MODULE_LICENSE("GPL v2"); |