| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* Copyright 2011-2014 Autronica Fire and Security AS |
| * |
| * Author(s): |
| * 2011-2014 Arvid Brodin, arvid.brodin@alten.se |
| * |
| * include file for HSR and PRP. |
| */ |
| |
| #ifndef __HSR_PRIVATE_H |
| #define __HSR_PRIVATE_H |
| |
| #include <linux/netdevice.h> |
| #include <linux/list.h> |
| #include <linux/if_vlan.h> |
| #include <linux/if_hsr.h> |
| |
| /* Time constants as specified in the HSR specification (IEC-62439-3 2010) |
| * Table 8. |
| * All values in milliseconds. |
| */ |
| #define HSR_LIFE_CHECK_INTERVAL 2000 /* ms */ |
| #define HSR_NODE_FORGET_TIME 60000 /* ms */ |
| #define HSR_PROXY_NODE_FORGET_TIME 60000 /* ms */ |
| #define HSR_ANNOUNCE_INTERVAL 100 /* ms */ |
| #define HSR_ENTRY_FORGET_TIME 400 /* ms */ |
| |
| /* By how much may slave1 and slave2 timestamps of latest received frame from |
| * each node differ before we notify of communication problem? |
| */ |
| #define MAX_SLAVE_DIFF 3000 /* ms */ |
| #define HSR_SEQNR_START (USHRT_MAX - 1024) |
| #define HSR_SUP_SEQNR_START (HSR_SEQNR_START / 2) |
| |
| /* How often shall we check for broken ring and remove node entries older than |
| * HSR_NODE_FORGET_TIME? |
| */ |
| #define PRUNE_PERIOD 3000 /* ms */ |
| #define PRUNE_PROXY_PERIOD 3000 /* ms */ |
| #define HSR_TLV_EOT 0 /* End of TLVs */ |
| #define HSR_TLV_ANNOUNCE 22 |
| #define HSR_TLV_LIFE_CHECK 23 |
| /* PRP V1 life check for Duplicate discard */ |
| #define PRP_TLV_LIFE_CHECK_DD 20 |
| /* PRP V1 life check for Duplicate Accept */ |
| #define PRP_TLV_LIFE_CHECK_DA 21 |
| /* PRP V1 life redundancy box MAC address */ |
| #define PRP_TLV_REDBOX_MAC 30 |
| |
| #define HSR_V1_SUP_LSDUSIZE 52 |
| |
| /* The helper functions below assumes that 'path' occupies the 4 most |
| * significant bits of the 16-bit field shared by 'path' and 'LSDU_size' (or |
| * equivalently, the 4 most significant bits of HSR tag byte 14). |
| * |
| * This is unclear in the IEC specification; its definition of MAC addresses |
| * indicates the spec is written with the least significant bit first (to the |
| * left). This, however, would mean that the LSDU field would be split in two |
| * with the path field in-between, which seems strange. I'm guessing the MAC |
| * address definition is in error. |
| */ |
| |
| static inline void set_hsr_tag_path(struct hsr_tag *ht, u16 path) |
| { |
| ht->path_and_LSDU_size = |
| htons((ntohs(ht->path_and_LSDU_size) & 0x0FFF) | (path << 12)); |
| } |
| |
| static inline void set_hsr_tag_LSDU_size(struct hsr_tag *ht, u16 LSDU_size) |
| { |
| ht->path_and_LSDU_size = htons((ntohs(ht->path_and_LSDU_size) & |
| 0xF000) | (LSDU_size & 0x0FFF)); |
| } |
| |
| struct hsr_ethhdr { |
| struct ethhdr ethhdr; |
| struct hsr_tag hsr_tag; |
| } __packed; |
| |
| struct hsr_vlan_ethhdr { |
| struct vlan_ethhdr vlanhdr; |
| struct hsr_tag hsr_tag; |
| } __packed; |
| |
| struct hsr_sup_tlv { |
| u8 HSR_TLV_type; |
| u8 HSR_TLV_length; |
| } __packed; |
| |
| /* HSR/PRP Supervision Frame data types. |
| * Field names as defined in the IEC:2010 standard for HSR. |
| */ |
| struct hsr_sup_tag { |
| __be16 path_and_HSR_ver; |
| __be16 sequence_nr; |
| struct hsr_sup_tlv tlv; |
| } __packed; |
| |
| struct hsr_sup_payload { |
| unsigned char macaddress_A[ETH_ALEN]; |
| } __packed; |
| |
| static inline void set_hsr_stag_path(struct hsr_sup_tag *hst, u16 path) |
| { |
| set_hsr_tag_path((struct hsr_tag *)hst, path); |
| } |
| |
| static inline void set_hsr_stag_HSR_ver(struct hsr_sup_tag *hst, u16 HSR_ver) |
| { |
| set_hsr_tag_LSDU_size((struct hsr_tag *)hst, HSR_ver); |
| } |
| |
| struct hsrv0_ethhdr_sp { |
| struct ethhdr ethhdr; |
| struct hsr_sup_tag hsr_sup; |
| } __packed; |
| |
| struct hsrv1_ethhdr_sp { |
| struct ethhdr ethhdr; |
| struct hsr_tag hsr; |
| struct hsr_sup_tag hsr_sup; |
| } __packed; |
| |
| enum hsr_port_type { |
| HSR_PT_NONE = 0, /* Must be 0, used by framereg */ |
| HSR_PT_SLAVE_A, |
| HSR_PT_SLAVE_B, |
| HSR_PT_INTERLINK, |
| HSR_PT_MASTER, |
| HSR_PT_PORTS, /* This must be the last item in the enum */ |
| }; |
| |
| /* PRP Redunancy Control Trailor (RCT). |
| * As defined in IEC-62439-4:2012, the PRP RCT is really { sequence Nr, |
| * Lan indentifier (LanId), LSDU_size and PRP_suffix = 0x88FB }. |
| * |
| * Field names as defined in the IEC:2012 standard for PRP. |
| */ |
| struct prp_rct { |
| __be16 sequence_nr; |
| __be16 lan_id_and_LSDU_size; |
| __be16 PRP_suffix; |
| } __packed; |
| |
| static inline u16 get_prp_LSDU_size(struct prp_rct *rct) |
| { |
| return ntohs(rct->lan_id_and_LSDU_size) & 0x0FFF; |
| } |
| |
| static inline void set_prp_lan_id(struct prp_rct *rct, u16 lan_id) |
| { |
| rct->lan_id_and_LSDU_size = htons((ntohs(rct->lan_id_and_LSDU_size) & |
| 0x0FFF) | (lan_id << 12)); |
| } |
| static inline void set_prp_LSDU_size(struct prp_rct *rct, u16 LSDU_size) |
| { |
| rct->lan_id_and_LSDU_size = htons((ntohs(rct->lan_id_and_LSDU_size) & |
| 0xF000) | (LSDU_size & 0x0FFF)); |
| } |
| |
| struct hsr_port { |
| struct list_head port_list; |
| struct net_device *dev; |
| struct hsr_priv *hsr; |
| enum hsr_port_type type; |
| }; |
| |
| struct hsr_frame_info; |
| struct hsr_node; |
| |
| struct hsr_proto_ops { |
| /* format and send supervision frame */ |
| void (*send_sv_frame)(struct hsr_port *port, unsigned long *interval, |
| const unsigned char addr[ETH_ALEN]); |
| void (*handle_san_frame)(bool san, enum hsr_port_type port, |
| struct hsr_node *node); |
| bool (*drop_frame)(struct hsr_frame_info *frame, struct hsr_port *port); |
| struct sk_buff * (*get_untagged_frame)(struct hsr_frame_info *frame, |
| struct hsr_port *port); |
| struct sk_buff * (*create_tagged_frame)(struct hsr_frame_info *frame, |
| struct hsr_port *port); |
| int (*fill_frame_info)(__be16 proto, struct sk_buff *skb, |
| struct hsr_frame_info *frame); |
| bool (*invalid_dan_ingress_frame)(__be16 protocol); |
| void (*update_san_info)(struct hsr_node *node, bool is_sup); |
| }; |
| |
| struct hsr_self_node { |
| unsigned char macaddress_A[ETH_ALEN]; |
| unsigned char macaddress_B[ETH_ALEN]; |
| struct rcu_head rcu_head; |
| }; |
| |
| struct hsr_priv { |
| struct rcu_head rcu_head; |
| struct list_head ports; |
| struct list_head node_db; /* Known HSR nodes */ |
| struct list_head proxy_node_db; /* RedBox HSR proxy nodes */ |
| struct hsr_self_node __rcu *self_node; /* MACs of slaves */ |
| struct timer_list announce_timer; /* Supervision frame dispatch */ |
| struct timer_list announce_proxy_timer; |
| struct timer_list prune_timer; |
| struct timer_list prune_proxy_timer; |
| int announce_count; |
| u16 sequence_nr; |
| u16 interlink_sequence_nr; /* Interlink port seq_nr */ |
| u16 sup_sequence_nr; /* For HSRv1 separate seq_nr for supervision */ |
| enum hsr_version prot_version; /* Indicate if HSRv0, HSRv1 or PRPv1 */ |
| spinlock_t seqnr_lock; /* locking for sequence_nr */ |
| spinlock_t list_lock; /* locking for node list */ |
| struct hsr_proto_ops *proto_ops; |
| #define PRP_LAN_ID 0x5 /* 0x1010 for A and 0x1011 for B. Bit 0 is set |
| * based on SLAVE_A or SLAVE_B |
| */ |
| u8 net_id; /* for PRP, it occupies most significant 3 bits |
| * of lan_id |
| */ |
| bool fwd_offloaded; /* Forwarding offloaded to HW */ |
| bool redbox; /* Device supports HSR RedBox */ |
| unsigned char macaddress_redbox[ETH_ALEN]; |
| unsigned char sup_multicast_addr[ETH_ALEN] __aligned(sizeof(u16)); |
| /* Align to u16 boundary to avoid unaligned access |
| * in ether_addr_equal |
| */ |
| #ifdef CONFIG_DEBUG_FS |
| struct dentry *node_tbl_root; |
| #endif |
| }; |
| |
| #define hsr_for_each_port(hsr, port) \ |
| list_for_each_entry_rcu((port), &(hsr)->ports, port_list) |
| |
| struct hsr_port *hsr_port_get_hsr(struct hsr_priv *hsr, enum hsr_port_type pt); |
| |
| /* Caller must ensure skb is a valid HSR frame */ |
| static inline u16 hsr_get_skb_sequence_nr(struct sk_buff *skb) |
| { |
| struct hsr_ethhdr *hsr_ethhdr; |
| |
| hsr_ethhdr = (struct hsr_ethhdr *)skb_mac_header(skb); |
| return ntohs(hsr_ethhdr->hsr_tag.sequence_nr); |
| } |
| |
| static inline struct prp_rct *skb_get_PRP_rct(struct sk_buff *skb) |
| { |
| unsigned char *tail = skb_tail_pointer(skb) - HSR_HLEN; |
| |
| struct prp_rct *rct = (struct prp_rct *)tail; |
| |
| if (rct->PRP_suffix == htons(ETH_P_PRP)) |
| return rct; |
| |
| return NULL; |
| } |
| |
| /* Assume caller has confirmed this skb is PRP suffixed */ |
| static inline u16 prp_get_skb_sequence_nr(struct prp_rct *rct) |
| { |
| return ntohs(rct->sequence_nr); |
| } |
| |
| /* assume there is a valid rct */ |
| static inline bool prp_check_lsdu_size(struct sk_buff *skb, |
| struct prp_rct *rct, |
| bool is_sup) |
| { |
| struct ethhdr *ethhdr; |
| int expected_lsdu_size; |
| |
| if (is_sup) { |
| expected_lsdu_size = HSR_V1_SUP_LSDUSIZE; |
| } else { |
| ethhdr = (struct ethhdr *)skb_mac_header(skb); |
| expected_lsdu_size = skb->len - 14; |
| if (ethhdr->h_proto == htons(ETH_P_8021Q)) |
| expected_lsdu_size -= 4; |
| } |
| |
| return (expected_lsdu_size == get_prp_LSDU_size(rct)); |
| } |
| |
| #if IS_ENABLED(CONFIG_DEBUG_FS) |
| void hsr_debugfs_rename(struct net_device *dev); |
| void hsr_debugfs_init(struct hsr_priv *priv, struct net_device *hsr_dev); |
| void hsr_debugfs_term(struct hsr_priv *priv); |
| void hsr_debugfs_create_root(void); |
| void hsr_debugfs_remove_root(void); |
| #else |
| static inline void hsr_debugfs_rename(struct net_device *dev) |
| { |
| } |
| static inline void hsr_debugfs_init(struct hsr_priv *priv, |
| struct net_device *hsr_dev) |
| {} |
| static inline void hsr_debugfs_term(struct hsr_priv *priv) |
| {} |
| static inline void hsr_debugfs_create_root(void) |
| {} |
| static inline void hsr_debugfs_remove_root(void) |
| {} |
| #endif |
| |
| #endif /* __HSR_PRIVATE_H */ |