drivers/usb/musb/musb_dma.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * MUSB OTG driver DMA controller abstraction
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
  */

 #ifndef __MUSB_DMA_H__
 #define __MUSB_DMA_H__

 struct musb_hw_ep;

 /*
  * DMA Controller Abstraction
  *
  * DMA Controllers are abstracted to allow use of a variety of different
  * implementations of DMA, as allowed by the Inventra USB cores.  On the
  * host side, usbcore sets up the DMA mappings and flushes caches; on the
  * peripheral side, the gadget controller driver does.  Responsibilities
  * of a DMA controller driver include:
  *
  *  - Handling the details of moving multiple USB packets
  *    in cooperation with the Inventra USB core, including especially
  *    the correct RX side treatment of short packets and buffer-full
  *    states (both of which terminate transfers).
  *
  *  - Knowing the correlation between dma channels and the
  *    Inventra core's local endpoint resources and data direction.
  *
  *  - Maintaining a list of allocated/available channels.
  *
  *  - Updating channel status on interrupts,
  *    whether shared with the Inventra core or separate.
  */

 #define MUSB_HSDMA_BASE		0x200
 #define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
 #define MUSB_HSDMA_CONTROL	0x4
 #define MUSB_HSDMA_ADDRESS	0x8
 #define MUSB_HSDMA_COUNT	0xc

 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)

 #ifdef CONFIG_MUSB_PIO_ONLY
 #define	is_dma_capable()	(0)
 #else
 #define	is_dma_capable()	(1)
 #endif

 #ifdef CONFIG_USB_UX500_DMA
 #define musb_dma_ux500(musb)		(musb->ops->quirks & MUSB_DMA_UX500)
 #else
 #define musb_dma_ux500(musb)		0
 #endif

 #ifdef CONFIG_USB_TI_CPPI41_DMA
 #define musb_dma_cppi41(musb)		(musb->ops->quirks & MUSB_DMA_CPPI41)
 #else
 #define musb_dma_cppi41(musb)		0
 #endif

 #ifdef CONFIG_USB_TUSB_OMAP_DMA
 #define tusb_dma_omap(musb)		(musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
 #else
 #define tusb_dma_omap(musb)		0
 #endif

 #ifdef CONFIG_USB_INVENTRA_DMA
 #define musb_dma_inventra(musb)		(musb->ops->quirks & MUSB_DMA_INVENTRA)
 #else
 #define musb_dma_inventra(musb)		0
 #endif

 #if defined(CONFIG_USB_TI_CPPI41_DMA)
 #define	is_cppi_enabled(musb)		musb_dma_cppi41(musb)
 #else
 #define	is_cppi_enabled(musb)		0
 #endif

 /*
  * DMA channel status ... updated by the dma controller driver whenever that
  * status changes, and protected by the overall controller spinlock.
  */
 enum dma_channel_status {
 	/* unallocated */
 	MUSB_DMA_STATUS_UNKNOWN,
 	/* allocated ... but not busy, no errors */
 	MUSB_DMA_STATUS_FREE,
 	/* busy ... transactions are active */
 	MUSB_DMA_STATUS_BUSY,
 	/* transaction(s) aborted due to ... dma or memory bus error */
 	MUSB_DMA_STATUS_BUS_ABORT,
 	/* transaction(s) aborted due to ... core error or USB fault */
 	MUSB_DMA_STATUS_CORE_ABORT
 };

 struct dma_controller;

 /**
  * struct dma_channel - A DMA channel.
  * @private_data: channel-private data
  * @max_len: the maximum number of bytes the channel can move in one
  *	transaction (typically representing many USB maximum-sized packets)
  * @actual_len: how many bytes have been transferred
  * @status: current channel status (updated e.g. on interrupt)
  * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
  *
  * channels are associated with an endpoint for the duration of at least
  * one usb transfer.
  */
 struct dma_channel {
 	void			*private_data;
 	/* FIXME not void* private_data, but a dma_controller * */
 	size_t			max_len;
 	size_t			actual_len;
 	enum dma_channel_status	status;
 	bool			desired_mode;
 	bool			rx_packet_done;
 };

 /*
  * dma_channel_status - return status of dma channel
  * @c: the channel
  *
  * Returns the software's view of the channel status.  If that status is BUSY
  * then it's possible that the hardware has completed (or aborted) a transfer,
  * so the driver needs to update that status.
  */
 static inline enum dma_channel_status
 dma_channel_status(struct dma_channel *c)
 {
 	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
 }

 /**
  * struct dma_controller - A DMA Controller.
  * @musb: the usb controller
  * @start: call this to start a DMA controller;
  *	return 0 on success, else negative errno
  * @stop: call this to stop a DMA controller
  *	return 0 on success, else negative errno
  * @channel_alloc: call this to allocate a DMA channel
  * @channel_release: call this to release a DMA channel
  * @channel_abort: call this to abort a pending DMA transaction,
  *	returning it to FREE (but allocated) state
  * @dma_callback: invoked on DMA completion, useful to run platform
  *	code such IRQ acknowledgment.
  *
  * Controllers manage dma channels.
  */
 struct dma_controller {
 	struct musb *musb;
 	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
 					struct musb_hw_ep *, u8 is_tx);
 	void			(*channel_release)(struct dma_channel *);
 	int			(*channel_program)(struct dma_channel *channel,
 							u16 maxpacket, u8 mode,
 							dma_addr_t dma_addr,
 							u32 length);
 	int			(*channel_abort)(struct dma_channel *);
 	int			(*is_compatible)(struct dma_channel *channel,
 							u16 maxpacket,
 							void *buf, u32 length);
 	void			(*dma_callback)(struct dma_controller *);
 };

 /* called after channel_program(), may indicate a fault */
 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);

 #ifdef CONFIG_MUSB_PIO_ONLY
 static inline struct dma_controller *
 musb_dma_controller_create(struct musb *m, void __iomem *io)
 {
 	return NULL;
 }

 static inline void musb_dma_controller_destroy(struct dma_controller *d) { }

 #else

 extern struct dma_controller *
 (*musb_dma_controller_create)(struct musb *, void __iomem *);

 extern void (*musb_dma_controller_destroy)(struct dma_controller *);
 #endif

 /* Platform specific DMA functions */
 extern struct dma_controller *
 musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
 extern void musbhs_dma_controller_destroy(struct dma_controller *c);
 extern struct dma_controller *
 musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base);
 extern irqreturn_t dma_controller_irq(int irq, void *private_data);

 extern struct dma_controller *
 tusb_dma_controller_create(struct musb *musb, void __iomem *base);
 extern void tusb_dma_controller_destroy(struct dma_controller *c);

 extern struct dma_controller *
 cppi41_dma_controller_create(struct musb *musb, void __iomem *base);
 extern void cppi41_dma_controller_destroy(struct dma_controller *c);

 extern struct dma_controller *
 ux500_dma_controller_create(struct musb *musb, void __iomem *base);
 extern void ux500_dma_controller_destroy(struct dma_controller *c);

 #endif	/* __MUSB_DMA_H__ */
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* MUSB OTG driver DMA controller abstraction
	*
	* Copyright 2005 Mentor Graphics Corporation
	* Copyright (C) 2005-2006 by Texas Instruments
	* Copyright (C) 2006-2007 Nokia Corporation
	*/

	#ifndef __MUSB_DMA_H__
	#define __MUSB_DMA_H__

	struct musb_hw_ep;

	/*
	* DMA Controller Abstraction
	*
	* DMA Controllers are abstracted to allow use of a variety of different
	* implementations of DMA, as allowed by the Inventra USB cores. On the
	* host side, usbcore sets up the DMA mappings and flushes caches; on the
	* peripheral side, the gadget controller driver does. Responsibilities
	* of a DMA controller driver include:
	*
	* - Handling the details of moving multiple USB packets
	* in cooperation with the Inventra USB core, including especially
	* the correct RX side treatment of short packets and buffer-full
	* states (both of which terminate transfers).
	*
	* - Knowing the correlation between dma channels and the
	* Inventra core's local endpoint resources and data direction.
	*
	* - Maintaining a list of allocated/available channels.
	*
	* - Updating channel status on interrupts,
	* whether shared with the Inventra core or separate.
	*/

	#define MUSB_HSDMA_BASE 0x200
	#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
	#define MUSB_HSDMA_CONTROL 0x4
	#define MUSB_HSDMA_ADDRESS 0x8
	#define MUSB_HSDMA_COUNT 0xc

	#define DMA_ADDR_INVALID (~(dma_addr_t)0)

	#ifdef CONFIG_MUSB_PIO_ONLY
	#define is_dma_capable() (0)
	#else
	#define is_dma_capable() (1)
	#endif

	#ifdef CONFIG_USB_UX500_DMA
	#define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500)
	#else
	#define musb_dma_ux500(musb) 0
	#endif

	#ifdef CONFIG_USB_TI_CPPI41_DMA
	#define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41)
	#else
	#define musb_dma_cppi41(musb) 0
	#endif

	#ifdef CONFIG_USB_TUSB_OMAP_DMA
	#define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
	#else
	#define tusb_dma_omap(musb) 0
	#endif

	#ifdef CONFIG_USB_INVENTRA_DMA
	#define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA)
	#else
	#define musb_dma_inventra(musb) 0
	#endif

	#if defined(CONFIG_USB_TI_CPPI41_DMA)
	#define is_cppi_enabled(musb) musb_dma_cppi41(musb)
	#else
	#define is_cppi_enabled(musb) 0
	#endif

	/*
	* DMA channel status ... updated by the dma controller driver whenever that
	* status changes, and protected by the overall controller spinlock.
	*/
	enum dma_channel_status {
	/* unallocated */
	MUSB_DMA_STATUS_UNKNOWN,
	/* allocated ... but not busy, no errors */
	MUSB_DMA_STATUS_FREE,
	/* busy ... transactions are active */
	MUSB_DMA_STATUS_BUSY,
	/* transaction(s) aborted due to ... dma or memory bus error */
	MUSB_DMA_STATUS_BUS_ABORT,
	/* transaction(s) aborted due to ... core error or USB fault */
	MUSB_DMA_STATUS_CORE_ABORT
	};

	struct dma_controller;

	/**
	* struct dma_channel - A DMA channel.
	* @private_data: channel-private data
	* @max_len: the maximum number of bytes the channel can move in one
	* transaction (typically representing many USB maximum-sized packets)
	* @actual_len: how many bytes have been transferred
	* @status: current channel status (updated e.g. on interrupt)
	* @desired_mode: true if mode 1 is desired; false if mode 0 is desired
	*
	* channels are associated with an endpoint for the duration of at least
	* one usb transfer.
	*/
	struct dma_channel {
	void *private_data;
	/* FIXME not void* private_data, but a dma_controller * */
	size_t max_len;
	size_t actual_len;
	enum dma_channel_status status;
	bool desired_mode;
	bool rx_packet_done;
	};

	/*
	* dma_channel_status - return status of dma channel
	* @c: the channel
	*
	* Returns the software's view of the channel status. If that status is BUSY
	* then it's possible that the hardware has completed (or aborted) a transfer,
	* so the driver needs to update that status.
	*/
	static inline enum dma_channel_status
	dma_channel_status(struct dma_channel *c)
	{
	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
	}

	/**
	* struct dma_controller - A DMA Controller.
	* @musb: the usb controller
	* @start: call this to start a DMA controller;
	* return 0 on success, else negative errno
	* @stop: call this to stop a DMA controller
	* return 0 on success, else negative errno
	* @channel_alloc: call this to allocate a DMA channel
	* @channel_release: call this to release a DMA channel
	* @channel_abort: call this to abort a pending DMA transaction,
	* returning it to FREE (but allocated) state
	* @dma_callback: invoked on DMA completion, useful to run platform
	* code such IRQ acknowledgment.
	*
	* Controllers manage dma channels.
	*/
	struct dma_controller {
	struct musb *musb;
	struct dma_channel (channel_alloc)(struct dma_controller *,
	struct musb_hw_ep *, u8 is_tx);
	void (channel_release)(struct dma_channel );
	int (channel_program)(struct dma_channel channel,
	u16 maxpacket, u8 mode,
	dma_addr_t dma_addr,
	u32 length);
	int (channel_abort)(struct dma_channel );
	int (is_compatible)(struct dma_channel channel,
	u16 maxpacket,
	void *buf, u32 length);
	void (dma_callback)(struct dma_controller );
	};

	/* called after channel_program(), may indicate a fault */
	extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);

	#ifdef CONFIG_MUSB_PIO_ONLY
	static inline struct dma_controller *
	musb_dma_controller_create(struct musb m, void __iomem io)
	{
	return NULL;
	}

	static inline void musb_dma_controller_destroy(struct dma_controller *d) { }

	#else

	extern struct dma_controller *
	(musb_dma_controller_create)(struct musb , void __iomem *);

	extern void (musb_dma_controller_destroy)(struct dma_controller );
	#endif

	/* Platform specific DMA functions */
	extern struct dma_controller *
	musbhs_dma_controller_create(struct musb musb, void __iomem base);
	extern void musbhs_dma_controller_destroy(struct dma_controller *c);
	extern struct dma_controller *
	musbhs_dma_controller_create_noirq(struct musb musb, void __iomem base);
	extern irqreturn_t dma_controller_irq(int irq, void *private_data);

	extern struct dma_controller *
	tusb_dma_controller_create(struct musb musb, void __iomem base);
	extern void tusb_dma_controller_destroy(struct dma_controller *c);

	extern struct dma_controller *
	cppi41_dma_controller_create(struct musb musb, void __iomem base);
	extern void cppi41_dma_controller_destroy(struct dma_controller *c);

	extern struct dma_controller *
	ux500_dma_controller_create(struct musb musb, void __iomem base);
	extern void ux500_dma_controller_destroy(struct dma_controller *c);

	#endif /* __MUSB_DMA_H__ */