Documentation/devicetree/bindings/spi/adi,axi-spi-engine.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/adi,axi-spi-engine.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices AXI SPI Engine Controller

description: |
  The AXI SPI Engine controller is part of the SPI Engine framework[1] and
  allows memory mapped access to the SPI Engine control bus. This allows it
  to be used as a general purpose software driven SPI controller as well as
  some optional advanced acceleration and offloading capabilities.

  [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine

maintainers:
  - Michael Hennerich <Michael.Hennerich@analog.com>
  - Nuno Sá <nuno.sa@analog.com>

allOf:
  - $ref: /schemas/spi/spi-controller.yaml#

properties:
  compatible:
    const: adi,axi-spi-engine-1.00.a

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: The AXI interconnect clock.
      - description: The SPI controller clock.

  clock-names:
    items:
      - const: s_axi_aclk
      - const: spi_clk

  trigger-sources:
    description:
      An array of trigger source phandles for offload instances. The index in
      the array corresponds to the offload instance number.
    minItems: 1
    maxItems: 32

  dmas:
    description:
      DMA channels connected to the input or output stream interface of an
      offload instance.
    minItems: 1
    maxItems: 32

  dma-names:
    items:
      pattern: "^offload(?:[12]?[0-9]|3[01])-[tr]x$"
    minItems: 1
    maxItems: 32

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    spi@44a00000 {
        compatible = "adi,axi-spi-engine-1.00.a";
        reg = <0x44a00000 0x1000>;
        interrupts = <0 56 4>;
        clocks = <&clkc 15>, <&clkc 15>;
        clock-names = "s_axi_aclk", "spi_clk";

        trigger-sources = <&trigger_clock>;
        dmas = <&dma 0>;
        dma-names = "offload0-rx";

        #address-cells = <1>;
        #size-cells = <0>;

        /* SPI devices */
    };