| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * SMP initialisation and IPI support | |
| * Based on arch/arm64/kernel/smp.c | |
| * | |
| * Copyright (C) 2012 ARM Ltd. | |
| * Copyright (C) 2015 Regents of the University of California | |
| * Copyright (C) 2017 SiFive | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/arch_topology.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/notifier.h> | |
| #include <linux/cpu.h> | |
| #include <linux/percpu.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/irq.h> | |
| #include <linux/of.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/sched/mm.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cpu_ops.h> | |
| #include <asm/irq.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/numa.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/sections.h> | |
| #include <asm/smp.h> | |
| #include <uapi/asm/hwcap.h> | |
| #include <asm/vector.h> | |
| #include "head.h" | |
| static DECLARE_COMPLETION(cpu_running); | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| int cpuid; | |
| unsigned int curr_cpuid; | |
| init_cpu_topology(); | |
| curr_cpuid = smp_processor_id(); | |
| store_cpu_topology(curr_cpuid); | |
| numa_store_cpu_info(curr_cpuid); | |
| numa_add_cpu(curr_cpuid); | |
| /* This covers non-smp usecase mandated by "nosmp" option */ | |
| if (max_cpus == 0) | |
| return; | |
| for_each_possible_cpu(cpuid) { | |
| if (cpuid == curr_cpuid) | |
| continue; | |
| set_cpu_present(cpuid, true); | |
| numa_store_cpu_info(cpuid); | |
| } | |
| } | |
| #ifdef CONFIG_ACPI | |
| static unsigned int cpu_count = 1; | |
| static int __init acpi_parse_rintc(union acpi_subtable_headers *header, const unsigned long end) | |
| { | |
| unsigned long hart; | |
| static bool found_boot_cpu; | |
| struct acpi_madt_rintc *processor = (struct acpi_madt_rintc *)header; | |
| /* | |
| * Each RINTC structure in MADT will have a flag. If ACPI_MADT_ENABLED | |
| * bit in the flag is not enabled, it means OS should not try to enable | |
| * the cpu to which RINTC belongs. | |
| */ | |
| if (!(processor->flags & ACPI_MADT_ENABLED)) | |
| return 0; | |
| if (BAD_MADT_ENTRY(processor, end)) | |
| return -EINVAL; | |
| acpi_table_print_madt_entry(&header->common); | |
| hart = processor->hart_id; | |
| if (hart == INVALID_HARTID) { | |
| pr_warn("Invalid hartid\n"); | |
| return 0; | |
| } | |
| if (hart == cpuid_to_hartid_map(0)) { | |
| BUG_ON(found_boot_cpu); | |
| found_boot_cpu = true; | |
| return 0; | |
| } | |
| if (cpu_count >= NR_CPUS) { | |
| pr_warn("NR_CPUS is too small for the number of ACPI tables.\n"); | |
| return 0; | |
| } | |
| cpuid_to_hartid_map(cpu_count) = hart; | |
| cpu_count++; | |
| return 0; | |
| } | |
| static void __init acpi_parse_and_init_cpus(void) | |
| { | |
| acpi_table_parse_madt(ACPI_MADT_TYPE_RINTC, acpi_parse_rintc, 0); | |
| } | |
| #else | |
| #define acpi_parse_and_init_cpus(...) do { } while (0) | |
| #endif | |
| static void __init of_parse_and_init_cpus(void) | |
| { | |
| struct device_node *dn; | |
| unsigned long hart; | |
| bool found_boot_cpu = false; | |
| int cpuid = 1; | |
| int rc; | |
| for_each_of_cpu_node(dn) { | |
| rc = riscv_early_of_processor_hartid(dn, &hart); | |
| if (rc < 0) | |
| continue; | |
| if (hart == cpuid_to_hartid_map(0)) { | |
| BUG_ON(found_boot_cpu); | |
| found_boot_cpu = 1; | |
| early_map_cpu_to_node(0, of_node_to_nid(dn)); | |
| continue; | |
| } | |
| if (cpuid >= NR_CPUS) { | |
| pr_warn("Invalid cpuid [%d] for hartid [%lu]\n", | |
| cpuid, hart); | |
| continue; | |
| } | |
| cpuid_to_hartid_map(cpuid) = hart; | |
| early_map_cpu_to_node(cpuid, of_node_to_nid(dn)); | |
| cpuid++; | |
| } | |
| BUG_ON(!found_boot_cpu); | |
| if (cpuid > nr_cpu_ids) | |
| pr_warn("Total number of cpus [%d] is greater than nr_cpus option value [%d]\n", | |
| cpuid, nr_cpu_ids); | |
| } | |
| void __init setup_smp(void) | |
| { | |
| int cpuid; | |
| cpu_set_ops(); | |
| if (acpi_disabled) | |
| of_parse_and_init_cpus(); | |
| else | |
| acpi_parse_and_init_cpus(); | |
| for (cpuid = 1; cpuid < nr_cpu_ids; cpuid++) | |
| if (cpuid_to_hartid_map(cpuid) != INVALID_HARTID) | |
| set_cpu_possible(cpuid, true); | |
| } | |
| static int start_secondary_cpu(int cpu, struct task_struct *tidle) | |
| { | |
| if (cpu_ops->cpu_start) | |
| return cpu_ops->cpu_start(cpu, tidle); | |
| return -EOPNOTSUPP; | |
| } | |
| int __cpu_up(unsigned int cpu, struct task_struct *tidle) | |
| { | |
| int ret = 0; | |
| tidle->thread_info.cpu = cpu; | |
| ret = start_secondary_cpu(cpu, tidle); | |
| if (!ret) { | |
| wait_for_completion_timeout(&cpu_running, | |
| msecs_to_jiffies(1000)); | |
| if (!cpu_online(cpu)) { | |
| pr_crit("CPU%u: failed to come online\n", cpu); | |
| ret = -EIO; | |
| } | |
| } else { | |
| pr_crit("CPU%u: failed to start\n", cpu); | |
| } | |
| return ret; | |
| } | |
| void __init smp_cpus_done(unsigned int max_cpus) | |
| { | |
| } | |
| /* | |
| * C entry point for a secondary processor. | |
| */ | |
| asmlinkage __visible void smp_callin(void) | |
| { | |
| struct mm_struct *mm = &init_mm; | |
| unsigned int curr_cpuid = smp_processor_id(); | |
| if (has_vector()) { | |
| /* | |
| * Return as early as possible so the hart with a mismatching | |
| * vlen won't boot. | |
| */ | |
| if (riscv_v_setup_vsize()) | |
| return; | |
| } | |
| /* All kernel threads share the same mm context. */ | |
| mmgrab(mm); | |
| current->active_mm = mm; | |
| store_cpu_topology(curr_cpuid); | |
| notify_cpu_starting(curr_cpuid); | |
| riscv_ipi_enable(); | |
| numa_add_cpu(curr_cpuid); | |
| set_cpu_online(curr_cpuid, true); | |
| riscv_user_isa_enable(); | |
| /* | |
| * Remote cache and TLB flushes are ignored while the CPU is offline, | |
| * so flush them both right now just in case. | |
| */ | |
| local_flush_icache_all(); | |
| local_flush_tlb_all(); | |
| complete(&cpu_running); | |
| /* | |
| * Disable preemption before enabling interrupts, so we don't try to | |
| * schedule a CPU that hasn't actually started yet. | |
| */ | |
| local_irq_enable(); | |
| cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); | |
| } |