| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/string.h> | |
| #include <linux/elf.h> | |
| #include <asm/page-states.h> | |
| #include <asm/boot_data.h> | |
| #include <asm/extmem.h> | |
| #include <asm/sections.h> | |
| #include <asm/maccess.h> | |
| #include <asm/cpu_mf.h> | |
| #include <asm/setup.h> | |
| #include <asm/kasan.h> | |
| #include <asm/kexec.h> | |
| #include <asm/sclp.h> | |
| #include <asm/diag.h> | |
| #include <asm/uv.h> | |
| #include <asm/abs_lowcore.h> | |
| #include <asm/physmem_info.h> | |
| #include "decompressor.h" | |
| #include "boot.h" | |
| #include "uv.h" | |
| struct vm_layout __bootdata_preserved(vm_layout); | |
| unsigned long __bootdata_preserved(__abs_lowcore); | |
| unsigned long __bootdata_preserved(__memcpy_real_area); | |
| pte_t *__bootdata_preserved(memcpy_real_ptep); | |
| unsigned long __bootdata_preserved(VMALLOC_START); | |
| unsigned long __bootdata_preserved(VMALLOC_END); | |
| struct page *__bootdata_preserved(vmemmap); | |
| unsigned long __bootdata_preserved(vmemmap_size); | |
| unsigned long __bootdata_preserved(MODULES_VADDR); | |
| unsigned long __bootdata_preserved(MODULES_END); | |
| unsigned long __bootdata_preserved(max_mappable); | |
| int __bootdata_preserved(relocate_lowcore); | |
| u64 __bootdata_preserved(stfle_fac_list[16]); | |
| struct oldmem_data __bootdata_preserved(oldmem_data); | |
| struct machine_info machine; | |
| void error(char *x) | |
| { | |
| boot_printk("\n\n%s\n\n -- System halted", x); | |
| disabled_wait(); | |
| } | |
| static void detect_facilities(void) | |
| { | |
| if (test_facility(8)) { | |
| machine.has_edat1 = 1; | |
| local_ctl_set_bit(0, CR0_EDAT_BIT); | |
| } | |
| if (test_facility(78)) | |
| machine.has_edat2 = 1; | |
| if (test_facility(130)) | |
| machine.has_nx = 1; | |
| } | |
| static int cmma_test_essa(void) | |
| { | |
| unsigned long reg1, reg2, tmp = 0; | |
| int rc = 1; | |
| psw_t old; | |
| /* Test ESSA_GET_STATE */ | |
| asm volatile( | |
| " mvc 0(16,%[psw_old]),0(%[psw_pgm])\n" | |
| " epsw %[reg1],%[reg2]\n" | |
| " st %[reg1],0(%[psw_pgm])\n" | |
| " st %[reg2],4(%[psw_pgm])\n" | |
| " larl %[reg1],1f\n" | |
| " stg %[reg1],8(%[psw_pgm])\n" | |
| " .insn rrf,0xb9ab0000,%[tmp],%[tmp],%[cmd],0\n" | |
| " la %[rc],0\n" | |
| "1: mvc 0(16,%[psw_pgm]),0(%[psw_old])\n" | |
| : [reg1] "=&d" (reg1), | |
| [reg2] "=&a" (reg2), | |
| [rc] "+&d" (rc), | |
| [tmp] "=&d" (tmp), | |
| "+Q" (get_lowcore()->program_new_psw), | |
| "=Q" (old) | |
| : [psw_old] "a" (&old), | |
| [psw_pgm] "a" (&get_lowcore()->program_new_psw), | |
| [cmd] "i" (ESSA_GET_STATE) | |
| : "cc", "memory"); | |
| return rc; | |
| } | |
| static void cmma_init(void) | |
| { | |
| if (!cmma_flag) | |
| return; | |
| if (cmma_test_essa()) { | |
| cmma_flag = 0; | |
| return; | |
| } | |
| if (test_facility(147)) | |
| cmma_flag = 2; | |
| } | |
| static void setup_lpp(void) | |
| { | |
| get_lowcore()->current_pid = 0; | |
| get_lowcore()->lpp = LPP_MAGIC; | |
| if (test_facility(40)) | |
| lpp(&get_lowcore()->lpp); | |
| } | |
| #ifdef CONFIG_KERNEL_UNCOMPRESSED | |
| static unsigned long mem_safe_offset(void) | |
| { | |
| return (unsigned long)_compressed_start; | |
| } | |
| static void deploy_kernel(void *output) | |
| { | |
| void *uncompressed_start = (void *)_compressed_start; | |
| if (output == uncompressed_start) | |
| return; | |
| memmove(output, uncompressed_start, vmlinux.image_size); | |
| memset(uncompressed_start, 0, vmlinux.image_size); | |
| } | |
| #endif | |
| static void rescue_initrd(unsigned long min, unsigned long max) | |
| { | |
| unsigned long old_addr, addr, size; | |
| if (!IS_ENABLED(CONFIG_BLK_DEV_INITRD)) | |
| return; | |
| if (!get_physmem_reserved(RR_INITRD, &addr, &size)) | |
| return; | |
| if (addr >= min && addr + size <= max) | |
| return; | |
| old_addr = addr; | |
| physmem_free(RR_INITRD); | |
| addr = physmem_alloc_top_down(RR_INITRD, size, 0); | |
| memmove((void *)addr, (void *)old_addr, size); | |
| } | |
| static void copy_bootdata(void) | |
| { | |
| if (__boot_data_end - __boot_data_start != vmlinux.bootdata_size) | |
| error(".boot.data section size mismatch"); | |
| memcpy((void *)vmlinux.bootdata_off, __boot_data_start, vmlinux.bootdata_size); | |
| if (__boot_data_preserved_end - __boot_data_preserved_start != vmlinux.bootdata_preserved_size) | |
| error(".boot.preserved.data section size mismatch"); | |
| memcpy((void *)vmlinux.bootdata_preserved_off, __boot_data_preserved_start, vmlinux.bootdata_preserved_size); | |
| } | |
| static void kaslr_adjust_relocs(unsigned long min_addr, unsigned long max_addr, | |
| unsigned long offset, unsigned long phys_offset) | |
| { | |
| int *reloc; | |
| long loc; | |
| /* Adjust R_390_64 relocations */ | |
| for (reloc = (int *)__vmlinux_relocs_64_start; reloc < (int *)__vmlinux_relocs_64_end; reloc++) { | |
| loc = (long)*reloc + phys_offset; | |
| if (loc < min_addr || loc > max_addr) | |
| error("64-bit relocation outside of kernel!\n"); | |
| *(u64 *)loc += offset; | |
| } | |
| } | |
| static void kaslr_adjust_got(unsigned long offset) | |
| { | |
| u64 *entry; | |
| /* | |
| * Adjust GOT entries, except for ones for undefined weak symbols | |
| * that resolved to zero. This also skips the first three reserved | |
| * entries on s390x that are zero. | |
| */ | |
| for (entry = (u64 *)vmlinux.got_start; entry < (u64 *)vmlinux.got_end; entry++) { | |
| if (*entry) | |
| *entry += offset; | |
| } | |
| } | |
| /* | |
| * Merge information from several sources into a single ident_map_size value. | |
| * "ident_map_size" represents the upper limit of physical memory we may ever | |
| * reach. It might not be all online memory, but also include standby (offline) | |
| * memory. "ident_map_size" could be lower then actual standby or even online | |
| * memory present, due to limiting factors. We should never go above this limit. | |
| * It is the size of our identity mapping. | |
| * | |
| * Consider the following factors: | |
| * 1. max_physmem_end - end of physical memory online or standby. | |
| * Always >= end of the last online memory range (get_physmem_online_end()). | |
| * 2. CONFIG_MAX_PHYSMEM_BITS - the maximum size of physical memory the | |
| * kernel is able to support. | |
| * 3. "mem=" kernel command line option which limits physical memory usage. | |
| * 4. OLDMEM_BASE which is a kdump memory limit when the kernel is executed as | |
| * crash kernel. | |
| * 5. "hsa" size which is a memory limit when the kernel is executed during | |
| * zfcp/nvme dump. | |
| */ | |
| static void setup_ident_map_size(unsigned long max_physmem_end) | |
| { | |
| unsigned long hsa_size; | |
| ident_map_size = max_physmem_end; | |
| if (memory_limit) | |
| ident_map_size = min(ident_map_size, memory_limit); | |
| ident_map_size = min(ident_map_size, 1UL << MAX_PHYSMEM_BITS); | |
| #ifdef CONFIG_CRASH_DUMP | |
| if (oldmem_data.start) { | |
| __kaslr_enabled = 0; | |
| ident_map_size = min(ident_map_size, oldmem_data.size); | |
| } else if (ipl_block_valid && is_ipl_block_dump()) { | |
| __kaslr_enabled = 0; | |
| if (!sclp_early_get_hsa_size(&hsa_size) && hsa_size) | |
| ident_map_size = min(ident_map_size, hsa_size); | |
| } | |
| #endif | |
| } | |
| #define FIXMAP_SIZE round_up(MEMCPY_REAL_SIZE + ABS_LOWCORE_MAP_SIZE, sizeof(struct lowcore)) | |
| static unsigned long get_vmem_size(unsigned long identity_size, | |
| unsigned long vmemmap_size, | |
| unsigned long vmalloc_size, | |
| unsigned long rte_size) | |
| { | |
| unsigned long max_mappable, vsize; | |
| max_mappable = max(identity_size, MAX_DCSS_ADDR); | |
| vsize = round_up(SZ_2G + max_mappable, rte_size) + | |
| round_up(vmemmap_size, rte_size) + | |
| FIXMAP_SIZE + MODULES_LEN + KASLR_LEN; | |
| return size_add(vsize, vmalloc_size); | |
| } | |
| static unsigned long setup_kernel_memory_layout(unsigned long kernel_size) | |
| { | |
| unsigned long vmemmap_start; | |
| unsigned long kernel_start; | |
| unsigned long asce_limit; | |
| unsigned long rte_size; | |
| unsigned long pages; | |
| unsigned long vsize; | |
| unsigned long vmax; | |
| pages = ident_map_size / PAGE_SIZE; | |
| /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */ | |
| vmemmap_size = SECTION_ALIGN_UP(pages) * sizeof(struct page); | |
| /* choose kernel address space layout: 4 or 3 levels. */ | |
| BUILD_BUG_ON(!IS_ALIGNED(TEXT_OFFSET, THREAD_SIZE)); | |
| BUILD_BUG_ON(!IS_ALIGNED(__NO_KASLR_START_KERNEL, THREAD_SIZE)); | |
| BUILD_BUG_ON(__NO_KASLR_END_KERNEL > _REGION1_SIZE); | |
| vsize = get_vmem_size(ident_map_size, vmemmap_size, vmalloc_size, _REGION3_SIZE); | |
| if (IS_ENABLED(CONFIG_KASAN) || __NO_KASLR_END_KERNEL > _REGION2_SIZE || | |
| (vsize > _REGION2_SIZE && kaslr_enabled())) { | |
| asce_limit = _REGION1_SIZE; | |
| if (__NO_KASLR_END_KERNEL > _REGION2_SIZE) { | |
| rte_size = _REGION2_SIZE; | |
| vsize = get_vmem_size(ident_map_size, vmemmap_size, vmalloc_size, _REGION2_SIZE); | |
| } else { | |
| rte_size = _REGION3_SIZE; | |
| } | |
| } else { | |
| asce_limit = _REGION2_SIZE; | |
| rte_size = _REGION3_SIZE; | |
| } | |
| /* | |
| * Forcing modules and vmalloc area under the ultravisor | |
| * secure storage limit, so that any vmalloc allocation | |
| * we do could be used to back secure guest storage. | |
| * | |
| * Assume the secure storage limit always exceeds _REGION2_SIZE, | |
| * otherwise asce_limit and rte_size would have been adjusted. | |
| */ | |
| vmax = adjust_to_uv_max(asce_limit); | |
| #ifdef CONFIG_KASAN | |
| BUILD_BUG_ON(__NO_KASLR_END_KERNEL > KASAN_SHADOW_START); | |
| /* force vmalloc and modules below kasan shadow */ | |
| vmax = min(vmax, KASAN_SHADOW_START); | |
| #endif | |
| vsize = min(vsize, vmax); | |
| if (kaslr_enabled()) { | |
| unsigned long kernel_end, kaslr_len, slots, pos; | |
| kaslr_len = max(KASLR_LEN, vmax - vsize); | |
| slots = DIV_ROUND_UP(kaslr_len - kernel_size, THREAD_SIZE); | |
| if (get_random(slots, &pos)) | |
| pos = 0; | |
| kernel_end = vmax - pos * THREAD_SIZE; | |
| kernel_start = round_down(kernel_end - kernel_size, THREAD_SIZE); | |
| } else if (vmax < __NO_KASLR_END_KERNEL || vsize > __NO_KASLR_END_KERNEL) { | |
| kernel_start = round_down(vmax - kernel_size, THREAD_SIZE); | |
| boot_printk("The kernel base address is forced to %lx\n", kernel_start); | |
| } else { | |
| kernel_start = __NO_KASLR_START_KERNEL; | |
| } | |
| __kaslr_offset = kernel_start; | |
| MODULES_END = round_down(kernel_start, _SEGMENT_SIZE); | |
| MODULES_VADDR = MODULES_END - MODULES_LEN; | |
| VMALLOC_END = MODULES_VADDR; | |
| if (IS_ENABLED(CONFIG_KMSAN)) | |
| VMALLOC_END -= MODULES_LEN * 2; | |
| /* allow vmalloc area to occupy up to about 1/2 of the rest virtual space left */ | |
| vsize = (VMALLOC_END - FIXMAP_SIZE) / 2; | |
| vsize = round_down(vsize, _SEGMENT_SIZE); | |
| vmalloc_size = min(vmalloc_size, vsize); | |
| if (IS_ENABLED(CONFIG_KMSAN)) { | |
| /* take 2/3 of vmalloc area for KMSAN shadow and origins */ | |
| vmalloc_size = round_down(vmalloc_size / 3, _SEGMENT_SIZE); | |
| VMALLOC_END -= vmalloc_size * 2; | |
| } | |
| VMALLOC_START = VMALLOC_END - vmalloc_size; | |
| __memcpy_real_area = round_down(VMALLOC_START - MEMCPY_REAL_SIZE, PAGE_SIZE); | |
| __abs_lowcore = round_down(__memcpy_real_area - ABS_LOWCORE_MAP_SIZE, | |
| sizeof(struct lowcore)); | |
| /* split remaining virtual space between 1:1 mapping & vmemmap array */ | |
| pages = __abs_lowcore / (PAGE_SIZE + sizeof(struct page)); | |
| pages = SECTION_ALIGN_UP(pages); | |
| /* keep vmemmap_start aligned to a top level region table entry */ | |
| vmemmap_start = round_down(__abs_lowcore - pages * sizeof(struct page), rte_size); | |
| /* make sure identity map doesn't overlay with vmemmap */ | |
| ident_map_size = min(ident_map_size, vmemmap_start); | |
| vmemmap_size = SECTION_ALIGN_UP(ident_map_size / PAGE_SIZE) * sizeof(struct page); | |
| /* make sure vmemmap doesn't overlay with absolute lowcore area */ | |
| if (vmemmap_start + vmemmap_size > __abs_lowcore) { | |
| vmemmap_size = SECTION_ALIGN_DOWN(ident_map_size / PAGE_SIZE) * sizeof(struct page); | |
| ident_map_size = vmemmap_size / sizeof(struct page) * PAGE_SIZE; | |
| } | |
| vmemmap = (struct page *)vmemmap_start; | |
| /* maximum address for which linear mapping could be created (DCSS, memory) */ | |
| BUILD_BUG_ON(MAX_DCSS_ADDR > (1UL << MAX_PHYSMEM_BITS)); | |
| max_mappable = max(ident_map_size, MAX_DCSS_ADDR); | |
| max_mappable = min(max_mappable, vmemmap_start); | |
| if (IS_ENABLED(CONFIG_RANDOMIZE_IDENTITY_BASE)) | |
| __identity_base = round_down(vmemmap_start - max_mappable, rte_size); | |
| return asce_limit; | |
| } | |
| /* | |
| * This function clears the BSS section of the decompressed Linux kernel and NOT the decompressor's. | |
| */ | |
| static void clear_bss_section(unsigned long kernel_start) | |
| { | |
| memset((void *)kernel_start + vmlinux.image_size, 0, vmlinux.bss_size); | |
| } | |
| /* | |
| * Set vmalloc area size to an 8th of (potential) physical memory | |
| * size, unless size has been set by kernel command line parameter. | |
| */ | |
| static void setup_vmalloc_size(void) | |
| { | |
| unsigned long size; | |
| if (vmalloc_size_set) | |
| return; | |
| size = round_up(ident_map_size / 8, _SEGMENT_SIZE); | |
| vmalloc_size = max(size, vmalloc_size); | |
| } | |
| static void kaslr_adjust_vmlinux_info(long offset) | |
| { | |
| vmlinux.bootdata_off += offset; | |
| vmlinux.bootdata_preserved_off += offset; | |
| vmlinux.got_start += offset; | |
| vmlinux.got_end += offset; | |
| vmlinux.init_mm_off += offset; | |
| vmlinux.swapper_pg_dir_off += offset; | |
| vmlinux.invalid_pg_dir_off += offset; | |
| vmlinux.alt_instructions += offset; | |
| vmlinux.alt_instructions_end += offset; | |
| #ifdef CONFIG_KASAN | |
| vmlinux.kasan_early_shadow_page_off += offset; | |
| vmlinux.kasan_early_shadow_pte_off += offset; | |
| vmlinux.kasan_early_shadow_pmd_off += offset; | |
| vmlinux.kasan_early_shadow_pud_off += offset; | |
| vmlinux.kasan_early_shadow_p4d_off += offset; | |
| #endif | |
| } | |
| void startup_kernel(void) | |
| { | |
| unsigned long vmlinux_size = vmlinux.image_size + vmlinux.bss_size; | |
| unsigned long nokaslr_text_lma, text_lma = 0, amode31_lma = 0; | |
| unsigned long kernel_size = TEXT_OFFSET + vmlinux_size; | |
| unsigned long kaslr_large_page_offset; | |
| unsigned long max_physmem_end; | |
| unsigned long asce_limit; | |
| unsigned long safe_addr; | |
| psw_t psw; | |
| setup_lpp(); | |
| /* | |
| * Non-randomized kernel physical start address must be _SEGMENT_SIZE | |
| * aligned (see blow). | |
| */ | |
| nokaslr_text_lma = ALIGN(mem_safe_offset(), _SEGMENT_SIZE); | |
| safe_addr = PAGE_ALIGN(nokaslr_text_lma + vmlinux_size); | |
| /* | |
| * Reserve decompressor memory together with decompression heap, | |
| * buffer and memory which might be occupied by uncompressed kernel | |
| * (if KASLR is off or failed). | |
| */ | |
| physmem_reserve(RR_DECOMPRESSOR, 0, safe_addr); | |
| if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && parmarea.initrd_size) | |
| physmem_reserve(RR_INITRD, parmarea.initrd_start, parmarea.initrd_size); | |
| oldmem_data.start = parmarea.oldmem_base; | |
| oldmem_data.size = parmarea.oldmem_size; | |
| store_ipl_parmblock(); | |
| read_ipl_report(); | |
| uv_query_info(); | |
| sclp_early_read_info(); | |
| setup_boot_command_line(); | |
| parse_boot_command_line(); | |
| detect_facilities(); | |
| cmma_init(); | |
| sanitize_prot_virt_host(); | |
| max_physmem_end = detect_max_physmem_end(); | |
| setup_ident_map_size(max_physmem_end); | |
| setup_vmalloc_size(); | |
| asce_limit = setup_kernel_memory_layout(kernel_size); | |
| /* got final ident_map_size, physmem allocations could be performed now */ | |
| physmem_set_usable_limit(ident_map_size); | |
| detect_physmem_online_ranges(max_physmem_end); | |
| save_ipl_cert_comp_list(); | |
| rescue_initrd(safe_addr, ident_map_size); | |
| /* | |
| * __kaslr_offset_phys must be _SEGMENT_SIZE aligned, so the lower | |
| * 20 bits (the offset within a large page) are zero. Copy the last | |
| * 20 bits of __kaslr_offset, which is THREAD_SIZE aligned, to | |
| * __kaslr_offset_phys. | |
| * | |
| * With this the last 20 bits of __kaslr_offset_phys and __kaslr_offset | |
| * are identical, which is required to allow for large mappings of the | |
| * kernel image. | |
| */ | |
| kaslr_large_page_offset = __kaslr_offset & ~_SEGMENT_MASK; | |
| if (kaslr_enabled()) { | |
| unsigned long size = vmlinux_size + kaslr_large_page_offset; | |
| text_lma = randomize_within_range(size, _SEGMENT_SIZE, TEXT_OFFSET, ident_map_size); | |
| } | |
| if (!text_lma) | |
| text_lma = nokaslr_text_lma; | |
| text_lma |= kaslr_large_page_offset; | |
| /* | |
| * [__kaslr_offset_phys..__kaslr_offset_phys + TEXT_OFFSET] region is | |
| * never accessed via the kernel image mapping as per the linker script: | |
| * | |
| * . = TEXT_OFFSET; | |
| * | |
| * Therefore, this region could be used for something else and does | |
| * not need to be reserved. See how it is skipped in setup_vmem(). | |
| */ | |
| __kaslr_offset_phys = text_lma - TEXT_OFFSET; | |
| kaslr_adjust_vmlinux_info(__kaslr_offset_phys); | |
| physmem_reserve(RR_VMLINUX, text_lma, vmlinux_size); | |
| deploy_kernel((void *)text_lma); | |
| /* vmlinux decompression is done, shrink reserved low memory */ | |
| physmem_reserve(RR_DECOMPRESSOR, 0, (unsigned long)_decompressor_end); | |
| /* | |
| * In case KASLR is enabled the randomized location of .amode31 | |
| * section might overlap with .vmlinux.relocs section. To avoid that | |
| * the below randomize_within_range() could have been called with | |
| * __vmlinux_relocs_64_end as the lower range address. However, | |
| * .amode31 section is written to by the decompressed kernel - at | |
| * that time the contents of .vmlinux.relocs is not needed anymore. | |
| * Conversly, .vmlinux.relocs is read only by the decompressor, even | |
| * before the kernel started. Therefore, in case the two sections | |
| * overlap there is no risk of corrupting any data. | |
| */ | |
| if (kaslr_enabled()) { | |
| unsigned long amode31_min; | |
| amode31_min = (unsigned long)_decompressor_end; | |
| amode31_lma = randomize_within_range(vmlinux.amode31_size, PAGE_SIZE, amode31_min, SZ_2G); | |
| } | |
| if (!amode31_lma) | |
| amode31_lma = text_lma - vmlinux.amode31_size; | |
| physmem_reserve(RR_AMODE31, amode31_lma, vmlinux.amode31_size); | |
| /* | |
| * The order of the following operations is important: | |
| * | |
| * - kaslr_adjust_relocs() must follow clear_bss_section() to establish | |
| * static memory references to data in .bss to be used by setup_vmem() | |
| * (i.e init_mm.pgd) | |
| * | |
| * - setup_vmem() must follow kaslr_adjust_relocs() to be able using | |
| * static memory references to data in .bss (i.e init_mm.pgd) | |
| * | |
| * - copy_bootdata() must follow setup_vmem() to propagate changes | |
| * to bootdata made by setup_vmem() | |
| */ | |
| clear_bss_section(text_lma); | |
| kaslr_adjust_relocs(text_lma, text_lma + vmlinux.image_size, | |
| __kaslr_offset, __kaslr_offset_phys); | |
| kaslr_adjust_got(__kaslr_offset); | |
| setup_vmem(__kaslr_offset, __kaslr_offset + kernel_size, asce_limit); | |
| copy_bootdata(); | |
| __apply_alternatives((struct alt_instr *)_vmlinux_info.alt_instructions, | |
| (struct alt_instr *)_vmlinux_info.alt_instructions_end, | |
| ALT_CTX_EARLY); | |
| /* | |
| * Save KASLR offset for early dumps, before vmcore_info is set. | |
| * Mark as uneven to distinguish from real vmcore_info pointer. | |
| */ | |
| get_lowcore()->vmcore_info = __kaslr_offset_phys ? __kaslr_offset_phys | 0x1UL : 0; | |
| /* | |
| * Jump to the decompressed kernel entry point and switch DAT mode on. | |
| */ | |
| psw.addr = __kaslr_offset + vmlinux.entry; | |
| psw.mask = PSW_KERNEL_BITS; | |
| __load_psw(psw); | |
| } |