| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Handling of a conduit device, switching frames via its switch fabric CPU port | |
| * | |
| * Copyright (c) 2017 Savoir-faire Linux Inc. | |
| * Vivien Didelot <vivien.didelot@savoirfairelinux.com> | |
| */ | |
| #include <linux/ethtool.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/netlink.h> | |
| #include <net/dsa.h> | |
| #include "conduit.h" | |
| #include "dsa.h" | |
| #include "port.h" | |
| #include "tag.h" | |
| static int dsa_conduit_get_regs_len(struct net_device *dev) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| int port = cpu_dp->index; | |
| int ret = 0; | |
| int len; | |
| if (ops->get_regs_len) { | |
| len = ops->get_regs_len(dev); | |
| if (len < 0) | |
| return len; | |
| ret += len; | |
| } | |
| ret += sizeof(struct ethtool_drvinfo); | |
| ret += sizeof(struct ethtool_regs); | |
| if (ds->ops->get_regs_len) { | |
| len = ds->ops->get_regs_len(ds, port); | |
| if (len < 0) | |
| return len; | |
| ret += len; | |
| } | |
| return ret; | |
| } | |
| static void dsa_conduit_get_regs(struct net_device *dev, | |
| struct ethtool_regs *regs, void *data) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| struct ethtool_drvinfo *cpu_info; | |
| struct ethtool_regs *cpu_regs; | |
| int port = cpu_dp->index; | |
| int len; | |
| if (ops->get_regs_len && ops->get_regs) { | |
| len = ops->get_regs_len(dev); | |
| if (len < 0) | |
| return; | |
| regs->len = len; | |
| ops->get_regs(dev, regs, data); | |
| data += regs->len; | |
| } | |
| cpu_info = (struct ethtool_drvinfo *)data; | |
| strscpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver)); | |
| data += sizeof(*cpu_info); | |
| cpu_regs = (struct ethtool_regs *)data; | |
| data += sizeof(*cpu_regs); | |
| if (ds->ops->get_regs_len && ds->ops->get_regs) { | |
| len = ds->ops->get_regs_len(ds, port); | |
| if (len < 0) | |
| return; | |
| cpu_regs->len = len; | |
| ds->ops->get_regs(ds, port, cpu_regs, data); | |
| } | |
| } | |
| static void dsa_conduit_get_ethtool_stats(struct net_device *dev, | |
| struct ethtool_stats *stats, | |
| uint64_t *data) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| int port = cpu_dp->index; | |
| int count = 0; | |
| if (ops->get_sset_count && ops->get_ethtool_stats) { | |
| count = ops->get_sset_count(dev, ETH_SS_STATS); | |
| ops->get_ethtool_stats(dev, stats, data); | |
| } | |
| if (ds->ops->get_ethtool_stats) | |
| ds->ops->get_ethtool_stats(ds, port, data + count); | |
| } | |
| static void dsa_conduit_get_ethtool_phy_stats(struct net_device *dev, | |
| struct ethtool_stats *stats, | |
| uint64_t *data) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| int port = cpu_dp->index; | |
| int count = 0; | |
| if (dev->phydev && !ops->get_ethtool_phy_stats) { | |
| count = phy_ethtool_get_sset_count(dev->phydev); | |
| if (count >= 0) | |
| phy_ethtool_get_stats(dev->phydev, stats, data); | |
| } else if (ops->get_sset_count && ops->get_ethtool_phy_stats) { | |
| count = ops->get_sset_count(dev, ETH_SS_PHY_STATS); | |
| ops->get_ethtool_phy_stats(dev, stats, data); | |
| } | |
| if (count < 0) | |
| count = 0; | |
| if (ds->ops->get_ethtool_phy_stats) | |
| ds->ops->get_ethtool_phy_stats(ds, port, data + count); | |
| } | |
| static int dsa_conduit_get_sset_count(struct net_device *dev, int sset) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| int count = 0; | |
| if (sset == ETH_SS_PHY_STATS && dev->phydev && | |
| !ops->get_ethtool_phy_stats) | |
| count = phy_ethtool_get_sset_count(dev->phydev); | |
| else if (ops->get_sset_count) | |
| count = ops->get_sset_count(dev, sset); | |
| if (count < 0) | |
| count = 0; | |
| if (ds->ops->get_sset_count) | |
| count += ds->ops->get_sset_count(ds, cpu_dp->index, sset); | |
| return count; | |
| } | |
| static void dsa_conduit_get_strings(struct net_device *dev, uint32_t stringset, | |
| uint8_t *data) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| int port = cpu_dp->index; | |
| int len = ETH_GSTRING_LEN; | |
| int mcount = 0, count, i; | |
| uint8_t pfx[4]; | |
| uint8_t *ndata; | |
| snprintf(pfx, sizeof(pfx), "p%.2d", port); | |
| /* We do not want to be NULL-terminated, since this is a prefix */ | |
| pfx[sizeof(pfx) - 1] = '_'; | |
| if (stringset == ETH_SS_PHY_STATS && dev->phydev && | |
| !ops->get_ethtool_phy_stats) { | |
| mcount = phy_ethtool_get_sset_count(dev->phydev); | |
| if (mcount < 0) | |
| mcount = 0; | |
| else | |
| phy_ethtool_get_strings(dev->phydev, data); | |
| } else if (ops->get_sset_count && ops->get_strings) { | |
| mcount = ops->get_sset_count(dev, stringset); | |
| if (mcount < 0) | |
| mcount = 0; | |
| ops->get_strings(dev, stringset, data); | |
| } | |
| if (ds->ops->get_strings) { | |
| ndata = data + mcount * len; | |
| /* This function copies ETH_GSTRINGS_LEN bytes, we will mangle | |
| * the output after to prepend our CPU port prefix we | |
| * constructed earlier | |
| */ | |
| ds->ops->get_strings(ds, port, stringset, ndata); | |
| count = ds->ops->get_sset_count(ds, port, stringset); | |
| if (count < 0) | |
| return; | |
| for (i = 0; i < count; i++) { | |
| memmove(ndata + (i * len + sizeof(pfx)), | |
| ndata + i * len, len - sizeof(pfx)); | |
| memcpy(ndata + i * len, pfx, sizeof(pfx)); | |
| } | |
| } | |
| } | |
| /* Deny PTP operations on conduit if there is at least one switch in the tree | |
| * that is PTP capable. | |
| */ | |
| int __dsa_conduit_hwtstamp_validate(struct net_device *dev, | |
| const struct kernel_hwtstamp_config *config, | |
| struct netlink_ext_ack *extack) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| struct dsa_switch_tree *dst; | |
| struct dsa_port *dp; | |
| dst = ds->dst; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dsa_port_supports_hwtstamp(dp)) { | |
| NL_SET_ERR_MSG(extack, | |
| "HW timestamping not allowed on DSA conduit when switch supports the operation"); | |
| return -EBUSY; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int dsa_conduit_ethtool_setup(struct net_device *dev) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| struct ethtool_ops *ops; | |
| if (netif_is_lag_master(dev)) | |
| return 0; | |
| ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL); | |
| if (!ops) | |
| return -ENOMEM; | |
| cpu_dp->orig_ethtool_ops = dev->ethtool_ops; | |
| if (cpu_dp->orig_ethtool_ops) | |
| memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops)); | |
| ops->get_regs_len = dsa_conduit_get_regs_len; | |
| ops->get_regs = dsa_conduit_get_regs; | |
| ops->get_sset_count = dsa_conduit_get_sset_count; | |
| ops->get_ethtool_stats = dsa_conduit_get_ethtool_stats; | |
| ops->get_strings = dsa_conduit_get_strings; | |
| ops->get_ethtool_phy_stats = dsa_conduit_get_ethtool_phy_stats; | |
| dev->ethtool_ops = ops; | |
| return 0; | |
| } | |
| static void dsa_conduit_ethtool_teardown(struct net_device *dev) | |
| { | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| if (netif_is_lag_master(dev)) | |
| return; | |
| dev->ethtool_ops = cpu_dp->orig_ethtool_ops; | |
| cpu_dp->orig_ethtool_ops = NULL; | |
| } | |
| /* Keep the conduit always promiscuous if the tagging protocol requires that | |
| * (garbles MAC DA) or if it doesn't support unicast filtering, case in which | |
| * it would revert to promiscuous mode as soon as we call dev_uc_add() on it | |
| * anyway. | |
| */ | |
| static void dsa_conduit_set_promiscuity(struct net_device *dev, int inc) | |
| { | |
| const struct dsa_device_ops *ops = dev->dsa_ptr->tag_ops; | |
| if ((dev->priv_flags & IFF_UNICAST_FLT) && !ops->promisc_on_conduit) | |
| return; | |
| ASSERT_RTNL(); | |
| dev_set_promiscuity(dev, inc); | |
| } | |
| static ssize_t tagging_show(struct device *d, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct net_device *dev = to_net_dev(d); | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| return sysfs_emit(buf, "%s\n", | |
| dsa_tag_protocol_to_str(cpu_dp->tag_ops)); | |
| } | |
| static ssize_t tagging_store(struct device *d, struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| const struct dsa_device_ops *new_tag_ops, *old_tag_ops; | |
| const char *end = strchrnul(buf, '\n'), *name; | |
| struct net_device *dev = to_net_dev(d); | |
| struct dsa_port *cpu_dp = dev->dsa_ptr; | |
| size_t len = end - buf; | |
| int err; | |
| /* Empty string passed */ | |
| if (!len) | |
| return -ENOPROTOOPT; | |
| name = kstrndup(buf, len, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| old_tag_ops = cpu_dp->tag_ops; | |
| new_tag_ops = dsa_tag_driver_get_by_name(name); | |
| kfree(name); | |
| /* Bad tagger name? */ | |
| if (IS_ERR(new_tag_ops)) | |
| return PTR_ERR(new_tag_ops); | |
| if (new_tag_ops == old_tag_ops) | |
| /* Drop the temporarily held duplicate reference, since | |
| * the DSA switch tree uses this tagger. | |
| */ | |
| goto out; | |
| err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, new_tag_ops, | |
| old_tag_ops); | |
| if (err) { | |
| /* On failure the old tagger is restored, so we don't need the | |
| * driver for the new one. | |
| */ | |
| dsa_tag_driver_put(new_tag_ops); | |
| return err; | |
| } | |
| /* On success we no longer need the module for the old tagging protocol | |
| */ | |
| out: | |
| dsa_tag_driver_put(old_tag_ops); | |
| return count; | |
| } | |
| static DEVICE_ATTR_RW(tagging); | |
| static struct attribute *dsa_user_attrs[] = { | |
| &dev_attr_tagging.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group dsa_group = { | |
| .name = "dsa", | |
| .attrs = dsa_user_attrs, | |
| }; | |
| static void dsa_conduit_reset_mtu(struct net_device *dev) | |
| { | |
| int err; | |
| err = dev_set_mtu(dev, ETH_DATA_LEN); | |
| if (err) | |
| netdev_dbg(dev, | |
| "Unable to reset MTU to exclude DSA overheads\n"); | |
| } | |
| int dsa_conduit_setup(struct net_device *dev, struct dsa_port *cpu_dp) | |
| { | |
| const struct dsa_device_ops *tag_ops = cpu_dp->tag_ops; | |
| struct dsa_switch *ds = cpu_dp->ds; | |
| struct device_link *consumer_link; | |
| int mtu, ret; | |
| mtu = ETH_DATA_LEN + dsa_tag_protocol_overhead(tag_ops); | |
| /* The DSA conduit must use SET_NETDEV_DEV for this to work. */ | |
| if (!netif_is_lag_master(dev)) { | |
| consumer_link = device_link_add(ds->dev, dev->dev.parent, | |
| DL_FLAG_AUTOREMOVE_CONSUMER); | |
| if (!consumer_link) | |
| netdev_err(dev, | |
| "Failed to create a device link to DSA switch %s\n", | |
| dev_name(ds->dev)); | |
| } | |
| /* The switch driver may not implement ->port_change_mtu(), case in | |
| * which dsa_user_change_mtu() will not update the conduit MTU either, | |
| * so we need to do that here. | |
| */ | |
| ret = dev_set_mtu(dev, mtu); | |
| if (ret) | |
| netdev_warn(dev, "error %d setting MTU to %d to include DSA overhead\n", | |
| ret, mtu); | |
| /* If we use a tagging format that doesn't have an ethertype | |
| * field, make sure that all packets from this point on get | |
| * sent to the tag format's receive function. | |
| */ | |
| wmb(); | |
| dev->dsa_ptr = cpu_dp; | |
| dsa_conduit_set_promiscuity(dev, 1); | |
| ret = dsa_conduit_ethtool_setup(dev); | |
| if (ret) | |
| goto out_err_reset_promisc; | |
| ret = sysfs_create_group(&dev->dev.kobj, &dsa_group); | |
| if (ret) | |
| goto out_err_ethtool_teardown; | |
| return ret; | |
| out_err_ethtool_teardown: | |
| dsa_conduit_ethtool_teardown(dev); | |
| out_err_reset_promisc: | |
| dsa_conduit_set_promiscuity(dev, -1); | |
| return ret; | |
| } | |
| void dsa_conduit_teardown(struct net_device *dev) | |
| { | |
| sysfs_remove_group(&dev->dev.kobj, &dsa_group); | |
| dsa_conduit_ethtool_teardown(dev); | |
| dsa_conduit_reset_mtu(dev); | |
| dsa_conduit_set_promiscuity(dev, -1); | |
| dev->dsa_ptr = NULL; | |
| /* If we used a tagging format that doesn't have an ethertype | |
| * field, make sure that all packets from this point get sent | |
| * without the tag and go through the regular receive path. | |
| */ | |
| wmb(); | |
| } | |
| int dsa_conduit_lag_setup(struct net_device *lag_dev, struct dsa_port *cpu_dp, | |
| struct netdev_lag_upper_info *uinfo, | |
| struct netlink_ext_ack *extack) | |
| { | |
| bool conduit_setup = false; | |
| int err; | |
| if (!netdev_uses_dsa(lag_dev)) { | |
| err = dsa_conduit_setup(lag_dev, cpu_dp); | |
| if (err) | |
| return err; | |
| conduit_setup = true; | |
| } | |
| err = dsa_port_lag_join(cpu_dp, lag_dev, uinfo, extack); | |
| if (err) { | |
| NL_SET_ERR_MSG_WEAK_MOD(extack, "CPU port failed to join LAG"); | |
| goto out_conduit_teardown; | |
| } | |
| return 0; | |
| out_conduit_teardown: | |
| if (conduit_setup) | |
| dsa_conduit_teardown(lag_dev); | |
| return err; | |
| } | |
| /* Tear down a conduit if there isn't any other user port on it, | |
| * optionally also destroying LAG information. | |
| */ | |
| void dsa_conduit_lag_teardown(struct net_device *lag_dev, | |
| struct dsa_port *cpu_dp) | |
| { | |
| struct net_device *upper; | |
| struct list_head *iter; | |
| dsa_port_lag_leave(cpu_dp, lag_dev); | |
| netdev_for_each_upper_dev_rcu(lag_dev, upper, iter) | |
| if (dsa_user_dev_check(upper)) | |
| return; | |
| dsa_conduit_teardown(lag_dev); | |
| } |