| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| // |
| // Device Tree file for LX2160A BLUEBOX3 |
| // |
| // Copyright 2020-2021 NXP |
| |
| /dts-v1/; |
| |
| #include "fsl-lx2160a.dtsi" |
| |
| / { |
| model = "NXP Layerscape LX2160ABLUEBOX3"; |
| compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a"; |
| |
| aliases { |
| crypto = &crypto; |
| mmc0 = &esdhc0; |
| mmc1 = &esdhc1; |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| sb_3v3: regulator-sb3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "MC34717-3.3VSB"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &can0 { |
| status = "okay"; |
| |
| can-transceiver { |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| &can1 { |
| status = "okay"; |
| |
| can-transceiver { |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| &crypto { |
| status = "okay"; |
| }; |
| |
| &dpmac5 { |
| phy-handle = <&aqr113c_phy1>; |
| phy-mode = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac6 { |
| phy-handle = <&aqr113c_phy2>; |
| phy-mode = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac9 { |
| phy-handle = <&aqr113c_phy3>; |
| phy-mode = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac10 { |
| phy-handle = <&aqr113c_phy4>; |
| phy-mode = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac17 { |
| phy-mode = "rgmii"; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &dpmac18 { |
| phy-mode = "rgmii"; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &emdio1 { |
| status = "okay"; |
| |
| aqr113c_phy2: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| /* IRQ_10G_PHY2 */ |
| interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| aqr113c_phy1: ethernet-phy@8 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x8>; |
| /* IRQ_10G_PHY1 */ |
| interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| sw1_mii3_phy: ethernet-phy@5 { |
| /* AR8035 */ |
| compatible = "ethernet-phy-id004d.d072"; |
| reg = <0x5>; |
| interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| sw2_mii3_phy: ethernet-phy@6 { |
| /* AR8035 */ |
| compatible = "ethernet-phy-id004d.d072"; |
| reg = <0x6>; |
| interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &emdio2 { |
| status = "okay"; |
| |
| aqr113c_phy4: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| /* IRQ_10G_PHY4 */ |
| interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| aqr113c_phy3: ethernet-phy@8 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x8>; |
| /* IRQ_10G_PHY3 */ |
| interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &esdhc0 { |
| sd-uhs-sdr104; |
| sd-uhs-sdr50; |
| sd-uhs-sdr25; |
| sd-uhs-sdr12; |
| status = "okay"; |
| }; |
| |
| &esdhc1 { |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| bus-width = <8>; |
| status = "okay"; |
| }; |
| |
| &fspi { |
| status = "okay"; |
| |
| mt35xu512aba0: flash@0 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| m25p,fast-read; |
| spi-max-frequency = <50000000>; |
| spi-rx-bus-width = <8>; |
| spi-tx-bus-width = <8>; |
| }; |
| |
| mt35xu512aba1: flash@1 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <1>; |
| m25p,fast-read; |
| spi-max-frequency = <50000000>; |
| spi-rx-bus-width = <8>; |
| spi-tx-bus-width = <8>; |
| }; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| i2c-mux@77 { |
| compatible = "nxp,pca9547"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2>; |
| |
| power-monitor@40 { |
| compatible = "ti,ina220"; |
| reg = <0x40>; |
| shunt-resistor = <500>; |
| }; |
| }; |
| |
| i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x3>; |
| |
| temp2: temperature-sensor@48 { |
| compatible = "nxp,sa56004"; |
| reg = <0x48>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| temp1: temperature-sensor@4c { |
| compatible = "nxp,sa56004"; |
| reg = <0x4c>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| i2c@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x4>; |
| |
| rtc@51 { |
| compatible = "nxp,pcf2129"; |
| reg = <0x51>; |
| interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| i2c@7 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x7>; |
| |
| i2c-mux@75 { |
| compatible = "nxp,pca9547"; |
| reg = <0x75>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0>; |
| |
| spi_bridge: spi@28 { |
| compatible = "nxp,sc18is602b"; |
| reg = <0x28>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| |
| i2c-mux@77 { |
| compatible = "nxp,pca9846"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x1>; |
| |
| /* The I2C multiplexer and temperature sensors are on |
| * the T6 riser card. |
| */ |
| i2c-mux@70 { |
| compatible = "nxp,pca9548"; |
| reg = <0x70>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@6 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x6>; |
| |
| q12: temperature-sensor@4c { |
| compatible = "nxp,sa56004"; |
| reg = <0x4c>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| i2c@7 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x7>; |
| |
| q11: temperature-sensor@4c { |
| compatible = "nxp,sa56004"; |
| reg = <0x4c>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| q13: temperature-sensor@48 { |
| compatible = "nxp,sa56004"; |
| reg = <0x48>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| q14: temperature-sensor@4a { |
| compatible = "nxp,sa56004"; |
| reg = <0x4a>; |
| vcc-supply = <&sb_3v3>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcs_mdio5 { |
| status = "okay"; |
| }; |
| |
| &pcs_mdio6 { |
| status = "okay"; |
| }; |
| |
| &pcs_mdio9 { |
| status = "okay"; |
| }; |
| |
| &pcs_mdio10 { |
| status = "okay"; |
| }; |
| |
| &spi_bridge { |
| sw1: ethernet-switch@0 { |
| compatible = "nxp,sja1110a"; |
| reg = <0>; |
| spi-max-frequency = <4000000>; |
| spi-cpol; |
| dsa,member = <0 0>; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Microcontroller port */ |
| port@0 { |
| reg = <0>; |
| status = "disabled"; |
| }; |
| |
| /* SW1_P1 */ |
| port@1 { |
| reg = <1>; |
| label = "con_2x20"; |
| phy-mode = "sgmii"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| ethernet = <&dpmac17>; |
| phy-mode = "rgmii-id"; |
| rx-internal-delay-ps = <2000>; |
| tx-internal-delay-ps = <2000>; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "1ge_p1"; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&sw1_mii3_phy>; |
| }; |
| |
| sw1p4: port@4 { |
| reg = <4>; |
| link = <&sw2p1>; |
| phy-mode = "sgmii"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| label = "trx1"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port5_base_t1_phy>; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| label = "trx2"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port6_base_t1_phy>; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| label = "trx3"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port7_base_t1_phy>; |
| }; |
| |
| port@8 { |
| reg = <8>; |
| label = "trx4"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port8_base_t1_phy>; |
| }; |
| |
| port@9 { |
| reg = <9>; |
| label = "trx5"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port9_base_t1_phy>; |
| }; |
| |
| port@a { |
| reg = <10>; |
| label = "trx6"; |
| phy-mode = "internal"; |
| phy-handle = <&sw1_port10_base_t1_phy>; |
| }; |
| }; |
| |
| mdios { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| compatible = "nxp,sja1110-base-t1-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| sw1_port5_base_t1_phy: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x1>; |
| }; |
| |
| sw1_port6_base_t1_phy: ethernet-phy@2 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x2>; |
| }; |
| |
| sw1_port7_base_t1_phy: ethernet-phy@3 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x3>; |
| }; |
| |
| sw1_port8_base_t1_phy: ethernet-phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x4>; |
| }; |
| |
| sw1_port9_base_t1_phy: ethernet-phy@5 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x5>; |
| }; |
| |
| sw1_port10_base_t1_phy: ethernet-phy@6 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x6>; |
| }; |
| }; |
| }; |
| }; |
| |
| sw2: ethernet-switch@2 { |
| compatible = "nxp,sja1110a"; |
| reg = <2>; |
| spi-max-frequency = <4000000>; |
| spi-cpol; |
| dsa,member = <0 1>; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Microcontroller port */ |
| port@0 { |
| reg = <0>; |
| status = "disabled"; |
| }; |
| |
| sw2p1: port@1 { |
| reg = <1>; |
| link = <&sw1p4>; |
| phy-mode = "sgmii"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| ethernet = <&dpmac18>; |
| phy-mode = "rgmii-id"; |
| rx-internal-delay-ps = <2000>; |
| tx-internal-delay-ps = <2000>; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| label = "1ge_p2"; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&sw2_mii3_phy>; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| label = "to_sw3"; |
| phy-mode = "2500base-x"; |
| |
| fixed-link { |
| speed = <2500>; |
| full-duplex; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| label = "trx7"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port5_base_t1_phy>; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| label = "trx8"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port6_base_t1_phy>; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| label = "trx9"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port7_base_t1_phy>; |
| }; |
| |
| port@8 { |
| reg = <8>; |
| label = "trx10"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port8_base_t1_phy>; |
| }; |
| |
| port@9 { |
| reg = <9>; |
| label = "trx11"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port9_base_t1_phy>; |
| }; |
| |
| port@a { |
| reg = <10>; |
| label = "trx12"; |
| phy-mode = "internal"; |
| phy-handle = <&sw2_port10_base_t1_phy>; |
| }; |
| }; |
| |
| mdios { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| compatible = "nxp,sja1110-base-t1-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| sw2_port5_base_t1_phy: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x1>; |
| }; |
| |
| sw2_port6_base_t1_phy: ethernet-phy@2 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x2>; |
| }; |
| |
| sw2_port7_base_t1_phy: ethernet-phy@3 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x3>; |
| }; |
| |
| sw2_port8_base_t1_phy: ethernet-phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x4>; |
| }; |
| |
| sw2_port9_base_t1_phy: ethernet-phy@5 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x5>; |
| }; |
| |
| sw2_port10_base_t1_phy: ethernet-phy@6 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x6>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| }; |
