| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2018 Boundary Devices |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/input/input.h> |
| #include "imx8mq.dtsi" |
| |
| / { |
| model = "Boundary Devices i.MX8MQ Nitrogen8M"; |
| compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x40000000 0 0x80000000>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| button-power { |
| label = "Power Button"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| wakeup-source; |
| }; |
| }; |
| |
| hdmi-connector { |
| compatible = "hdmi-connector"; |
| ddc-i2c-bus = <&ddc_i2c_bus>; |
| label = "hdmi"; |
| type = "a"; |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <<8912_out>; |
| }; |
| }; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_vref_0v9: regulator-vref-0v9 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-0v9"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| }; |
| |
| reg_vref_1v8: regulator-vref-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| reg_vref_2v5: regulator-vref-2v5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-2v5"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| |
| reg_vref_3v3: regulator-vref-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_vref_5v: regulator-vref-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| }; |
| |
| &dphy { |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@4 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <4>; |
| interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| }; |
| |
| /* Release reset of the USB Host HUB */ |
| &gpio1 { |
| usb-host-reset-hog { |
| gpio-hog; |
| gpios = <14 GPIO_ACTIVE_HIGH>; |
| output-high; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| i2cmux@70 { |
| compatible = "nxp,pca9546"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_pca9546>; |
| reg = <0x70>; |
| reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c1a: i2c1@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_arm_dram: regulator@60 { |
| compatible = "fcs,fan53555"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_arm_dram>; |
| reg = <0x60>; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| i2c1b: i2c1@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_dram_1p1v: regulator@60 { |
| compatible = "fcs,fan53555"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_dram_1p1v>; |
| reg = <0x60>; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| i2c1c: i2c1@2 { |
| reg = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_soc_gpu_vpu: regulator@60 { |
| compatible = "fcs,fan53555"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; |
| reg = <0x60>; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| i2c1d: i2c1@3 { |
| reg = <3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| rtc@68 { |
| compatible = "microcrystal,rv4162"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1d_rv4162>; |
| reg = <0x68>; |
| interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; |
| wakeup-source; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| pca9546: i2cmux@70 { |
| compatible = "nxp,pca9546"; |
| reg = <0x70>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c4@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| |
| hdmi-bridge@48 { |
| compatible = "lontium,lt8912b"; |
| reg = <0x48> ; |
| reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| hdmi_out_in: endpoint { |
| data-lanes = <1 2 3 4>; |
| remote-endpoint = <&mipi_dsi_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lt8912_out: endpoint { |
| remote-endpoint = <&hdmi_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| ddc_i2c_bus: i2c4@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| }; |
| |
| i2c4@3 { |
| reg = <3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| |
| max7323: gpio-expander@68 { |
| compatible = "maxim,max7323"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_max7323>; |
| gpio-controller; |
| reg = <0x68>; |
| #gpio-cells = <2>; |
| }; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| ports { |
| port@1 { |
| reg = <1>; |
| |
| mipi_dsi_out: endpoint { |
| remote-endpoint = <&hdmi_out_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart1 { /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clk IMX8MQ_CLK_UART1>; |
| assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| assigned-clocks = <&clk IMX8MQ_CLK_UART2>; |
| assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| dr_mode = "otg"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb3_0>; |
| status = "okay"; |
| }; |
| |
| &usb3_phy0 { |
| vbus-supply = <®_usb_otg_vbus>; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb3_1>; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| non-removable; |
| vmmc-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| /* J17 connector, odd */ |
| MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* Pin 19 */ |
| MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 /* Pin 21 */ |
| MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x19 /* Pin 23 */ |
| MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* Pin 25 */ |
| MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* Pin 27 */ |
| MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* Pin 29 */ |
| MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 /* Pin 31 */ |
| MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 /* Pin 33 */ |
| MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 /* Pin 35 */ |
| MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x19 /* Pin 39 */ |
| MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* Pin 41 */ |
| MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* Pin 43 */ |
| MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* Pin 45 */ |
| MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* Pin 47 */ |
| MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* Pin 49 */ |
| MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* Pin 51 */ |
| |
| /* J17 connector, even */ |
| MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* Pin 44 */ |
| MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 /* Pin 48 */ |
| MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* Pin 50 */ |
| MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* Pin 54 */ |
| MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* Pin 56 */ |
| |
| /* J18 connector, odd */ |
| MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* Pin 41 */ |
| MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* Pin 43 */ |
| MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* Pin 45 */ |
| MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* Pin 47 */ |
| MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* Pin 49 */ |
| MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* Pin 53 */ |
| |
| /* J18 connector, even */ |
| MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* Pin 32 */ |
| MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* Pin 36 */ |
| MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* Pin 38 */ |
| MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* Pin 40 */ |
| MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* Pin 42 */ |
| MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* Pin 44 */ |
| MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* Pin 46 */ |
| |
| /* J13 Pin 2, WL_WAKE */ |
| MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xd6 |
| /* J13 Pin 4, WL_IRQ, not needed for Silex */ |
| MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21 0xd6 |
| /* J13 pin 9, unused */ |
| MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 |
| /* J13 Pin 41, BT_CLK_REQ */ |
| MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0xd6 |
| /* J13 Pin 42, BT_HOST_WAKE */ |
| MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0xd6 |
| |
| /* Clock for both CSI1 and CSI2 */ |
| MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x07 |
| /* test points */ |
| MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 /* TP87 */ |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 |
| MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 |
| MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio-keysgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 |
| >; |
| }; |
| |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f |
| MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c1_pca9546: i2c1-pca9546grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 |
| >; |
| }; |
| |
| pinctrl_i2c1d_rv4162: i2c1d-rv4162grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x49 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f |
| MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f |
| >; |
| }; |
| |
| pinctrl_max7323: max7323grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 |
| >; |
| }; |
| |
| pinctrl_reg_arm_dram: reg-arm-dramgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 |
| >; |
| }; |
| |
| pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16 |
| >; |
| }; |
| |
| pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x16 |
| >; |
| }; |
| |
| pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 |
| MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 |
| MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 |
| >; |
| }; |
| |
| pinctrl_usb3_0: usb3-0grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16 |
| >; |
| }; |
| |
| pinctrl_usb3_1: usb3-1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 |
| MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 |
| >; |
| }; |
| }; |
