|  | // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) | 
|  | // Copyright(c) 2015-22 Intel Corporation. | 
|  |  | 
|  | /* | 
|  | * Soundwire Intel Manager Driver | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/auxiliary_bus.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <sound/soc.h> | 
|  | #include <linux/soundwire/sdw_registers.h> | 
|  | #include <linux/soundwire/sdw.h> | 
|  | #include <linux/soundwire/sdw_intel.h> | 
|  | #include "cadence_master.h" | 
|  | #include "bus.h" | 
|  | #include "intel.h" | 
|  | #include "intel_auxdevice.h" | 
|  |  | 
|  | #define INTEL_MASTER_SUSPEND_DELAY_MS	3000 | 
|  |  | 
|  | /* | 
|  | * debug/config flags for the Intel SoundWire Master. | 
|  | * | 
|  | * Since we may have multiple masters active, we can have up to 8 | 
|  | * flags reused in each byte, with master0 using the ls-byte, etc. | 
|  | */ | 
|  |  | 
|  | #define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME		BIT(0) | 
|  | #define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP		BIT(1) | 
|  | #define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE	BIT(2) | 
|  | #define SDW_INTEL_MASTER_DISABLE_MULTI_LINK		BIT(3) | 
|  |  | 
|  | static int md_flags; | 
|  | module_param_named(sdw_md_flags, md_flags, int, 0444); | 
|  | MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)"); | 
|  |  | 
|  | struct wake_capable_part { | 
|  | const u16 mfg_id; | 
|  | const u16 part_id; | 
|  | }; | 
|  |  | 
|  | static struct wake_capable_part wake_capable_list[] = { | 
|  | {0x01fa, 0x4243}, | 
|  | {0x025d, 0x5682}, | 
|  | {0x025d, 0x700}, | 
|  | {0x025d, 0x711}, | 
|  | {0x025d, 0x1712}, | 
|  | {0x025d, 0x1713}, | 
|  | {0x025d, 0x1716}, | 
|  | {0x025d, 0x1717}, | 
|  | {0x025d, 0x712}, | 
|  | {0x025d, 0x713}, | 
|  | {0x025d, 0x714}, | 
|  | {0x025d, 0x715}, | 
|  | {0x025d, 0x716}, | 
|  | {0x025d, 0x717}, | 
|  | {0x025d, 0x722}, | 
|  | }; | 
|  |  | 
|  | static bool is_wake_capable(struct sdw_slave *slave) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(wake_capable_list); i++) | 
|  | if (slave->id.part_id == wake_capable_list[i].part_id && | 
|  | slave->id.mfg_id == wake_capable_list[i].mfg_id) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int generic_pre_bank_switch(struct sdw_bus *bus) | 
|  | { | 
|  | struct sdw_cdns *cdns = bus_to_cdns(bus); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  |  | 
|  | return sdw->link_res->hw_ops->pre_bank_switch(sdw); | 
|  | } | 
|  |  | 
|  | static int generic_post_bank_switch(struct sdw_bus *bus) | 
|  | { | 
|  | struct sdw_cdns *cdns = bus_to_cdns(bus); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  |  | 
|  | return sdw->link_res->hw_ops->post_bank_switch(sdw); | 
|  | } | 
|  |  | 
|  | static void generic_new_peripheral_assigned(struct sdw_bus *bus, | 
|  | struct sdw_slave *slave, | 
|  | int dev_num) | 
|  | { | 
|  | struct sdw_cdns *cdns = bus_to_cdns(bus); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | int dev_num_min; | 
|  | int dev_num_max; | 
|  | bool wake_capable = slave->prop.wake_capable || is_wake_capable(slave); | 
|  |  | 
|  | if (wake_capable) { | 
|  | dev_num_min = SDW_INTEL_DEV_NUM_IDA_MIN; | 
|  | dev_num_max = SDW_MAX_DEVICES; | 
|  | } else { | 
|  | dev_num_min = 1; | 
|  | dev_num_max = SDW_INTEL_DEV_NUM_IDA_MIN - 1; | 
|  | } | 
|  |  | 
|  | /* paranoia check, this should never happen */ | 
|  | if (dev_num < dev_num_min || dev_num > dev_num_max)  { | 
|  | dev_err(bus->dev, "%s: invalid dev_num %d, wake supported %d\n", | 
|  | __func__, dev_num, slave->prop.wake_capable); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (sdw->link_res->hw_ops->program_sdi && wake_capable) | 
|  | sdw->link_res->hw_ops->program_sdi(sdw, dev_num); | 
|  | } | 
|  |  | 
|  | static int sdw_master_read_intel_prop(struct sdw_bus *bus) | 
|  | { | 
|  | struct sdw_master_prop *prop = &bus->prop; | 
|  | struct sdw_intel_prop *intel_prop; | 
|  | struct fwnode_handle *link; | 
|  | char name[32]; | 
|  | u32 quirk_mask; | 
|  |  | 
|  | /* Find master handle */ | 
|  | snprintf(name, sizeof(name), | 
|  | "mipi-sdw-link-%d-subproperties", bus->link_id); | 
|  |  | 
|  | link = device_get_named_child_node(bus->dev, name); | 
|  | if (!link) { | 
|  | dev_err(bus->dev, "Master node %s not found\n", name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | fwnode_property_read_u32(link, | 
|  | "intel-sdw-ip-clock", | 
|  | &prop->mclk_freq); | 
|  |  | 
|  | /* the values reported by BIOS are the 2x clock, not the bus clock */ | 
|  | prop->mclk_freq /= 2; | 
|  |  | 
|  | fwnode_property_read_u32(link, | 
|  | "intel-quirk-mask", | 
|  | &quirk_mask); | 
|  |  | 
|  | if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) | 
|  | prop->hw_disabled = true; | 
|  |  | 
|  | prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH | | 
|  | SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY; | 
|  |  | 
|  | intel_prop = devm_kzalloc(bus->dev, sizeof(*intel_prop), GFP_KERNEL); | 
|  | if (!intel_prop) { | 
|  | fwnode_handle_put(link); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* initialize with hardware defaults, in case the properties are not found */ | 
|  | intel_prop->clde = 0x0; | 
|  | intel_prop->doaise2 = 0x0; | 
|  | intel_prop->dodse2 = 0x0; | 
|  | intel_prop->clds = 0x0; | 
|  | intel_prop->clss = 0x0; | 
|  | intel_prop->doaise = 0x1; | 
|  | intel_prop->doais = 0x3; | 
|  | intel_prop->dodse  = 0x0; | 
|  | intel_prop->dods  = 0x1; | 
|  |  | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-clde", | 
|  | &intel_prop->clde); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-doaise2", | 
|  | &intel_prop->doaise2); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-dodse2", | 
|  | &intel_prop->dodse2); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-clds", | 
|  | &intel_prop->clds); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-clss", | 
|  | &intel_prop->clss); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-doaise", | 
|  | &intel_prop->doaise); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-doais", | 
|  | &intel_prop->doais); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-dodse", | 
|  | &intel_prop->dodse); | 
|  | fwnode_property_read_u16(link, | 
|  | "intel-sdw-dods", | 
|  | &intel_prop->dods); | 
|  | bus->vendor_specific_prop = intel_prop; | 
|  |  | 
|  | dev_dbg(bus->dev, "doaise %#x doais %#x dodse %#x dods %#x\n", | 
|  | intel_prop->doaise, | 
|  | intel_prop->doais, | 
|  | intel_prop->dodse, | 
|  | intel_prop->dods); | 
|  |  | 
|  | fwnode_handle_put(link); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int intel_prop_read(struct sdw_bus *bus) | 
|  | { | 
|  | struct sdw_master_prop *prop; | 
|  |  | 
|  | /* Initialize with default handler to read all DisCo properties */ | 
|  | sdw_master_read_prop(bus); | 
|  |  | 
|  | /* | 
|  | * Only one bus frequency is supported so far, filter | 
|  | * frequencies reported in the DSDT | 
|  | */ | 
|  | prop = &bus->prop; | 
|  | if (prop->clk_freq && prop->num_clk_freq > 1) { | 
|  | unsigned int default_bus_frequency; | 
|  |  | 
|  | default_bus_frequency = | 
|  | prop->default_frame_rate * | 
|  | prop->default_row * | 
|  | prop->default_col / | 
|  | SDW_DOUBLE_RATE_FACTOR; | 
|  |  | 
|  | prop->num_clk_freq = 1; | 
|  | prop->clk_freq[0] = default_bus_frequency; | 
|  | prop->max_clk_freq = default_bus_frequency; | 
|  | } | 
|  |  | 
|  | /* read Intel-specific properties */ | 
|  | sdw_master_read_intel_prop(bus); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static DEFINE_IDA(intel_peripheral_ida); | 
|  |  | 
|  | static int intel_get_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave) | 
|  | { | 
|  | int bit; | 
|  |  | 
|  | if (slave->prop.wake_capable || is_wake_capable(slave)) | 
|  | return ida_alloc_range(&intel_peripheral_ida, | 
|  | SDW_INTEL_DEV_NUM_IDA_MIN, SDW_MAX_DEVICES, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | bit = find_first_zero_bit(slave->bus->assigned, SDW_MAX_DEVICES); | 
|  | if (bit == SDW_MAX_DEVICES) | 
|  | return -ENODEV; | 
|  |  | 
|  | return bit; | 
|  | } | 
|  |  | 
|  | static void intel_put_device_num_ida(struct sdw_bus *bus, struct sdw_slave *slave) | 
|  | { | 
|  | if (slave->prop.wake_capable || is_wake_capable(slave)) | 
|  | ida_free(&intel_peripheral_ida, slave->dev_num); | 
|  | } | 
|  |  | 
|  | static struct sdw_master_ops sdw_intel_ops = { | 
|  | .read_prop = intel_prop_read, | 
|  | .override_adr = sdw_dmi_override_adr, | 
|  | .xfer_msg = cdns_xfer_msg, | 
|  | .xfer_msg_defer = cdns_xfer_msg_defer, | 
|  | .set_bus_conf = cdns_bus_conf, | 
|  | .pre_bank_switch = generic_pre_bank_switch, | 
|  | .post_bank_switch = generic_post_bank_switch, | 
|  | .read_ping_status = cdns_read_ping_status, | 
|  | .get_device_num =  intel_get_device_num_ida, | 
|  | .put_device_num = intel_put_device_num_ida, | 
|  | .new_peripheral_assigned = generic_new_peripheral_assigned, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * probe and init (aux_dev_id argument is required by function prototype but not used) | 
|  | */ | 
|  | static int intel_link_probe(struct auxiliary_device *auxdev, | 
|  | const struct auxiliary_device_id *aux_dev_id) | 
|  |  | 
|  | { | 
|  | struct device *dev = &auxdev->dev; | 
|  | struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev); | 
|  | struct sdw_intel *sdw; | 
|  | struct sdw_cdns *cdns; | 
|  | struct sdw_bus *bus; | 
|  | int ret; | 
|  |  | 
|  | sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL); | 
|  | if (!sdw) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cdns = &sdw->cdns; | 
|  | bus = &cdns->bus; | 
|  |  | 
|  | sdw->instance = auxdev->id; | 
|  | sdw->link_res = &ldev->link_res; | 
|  | cdns->dev = dev; | 
|  | cdns->registers = sdw->link_res->registers; | 
|  | cdns->ip_offset = sdw->link_res->ip_offset; | 
|  | cdns->instance = sdw->instance; | 
|  | cdns->msg_count = 0; | 
|  |  | 
|  | /* single controller for all SoundWire links */ | 
|  | bus->controller_id = 0; | 
|  |  | 
|  | bus->link_id = auxdev->id; | 
|  | bus->clk_stop_timeout = 1; | 
|  |  | 
|  | /* | 
|  | * paranoia check: make sure ACPI-reported number of links is aligned with | 
|  | * hardware capabilities. | 
|  | */ | 
|  | ret = sdw_intel_get_link_count(sdw); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: sdw_intel_get_link_count failed: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  | if (ret <= sdw->instance) { | 
|  | dev_err(dev, "%s: invalid link id %d, link count %d\n", __func__, auxdev->id, ret); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | sdw_cdns_probe(cdns); | 
|  |  | 
|  | /* Set ops */ | 
|  | bus->ops = &sdw_intel_ops; | 
|  |  | 
|  | /* set driver data, accessed by snd_soc_dai_get_drvdata() */ | 
|  | auxiliary_set_drvdata(auxdev, cdns); | 
|  |  | 
|  | /* use generic bandwidth allocation algorithm */ | 
|  | sdw->cdns.bus.compute_params = sdw_compute_params; | 
|  |  | 
|  | /* avoid resuming from pm_runtime suspend if it's not required */ | 
|  | dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND); | 
|  |  | 
|  | ret = sdw_bus_master_add(bus, dev, dev->fwnode); | 
|  | if (ret) { | 
|  | dev_err(dev, "sdw_bus_master_add fail: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (bus->prop.hw_disabled) | 
|  | dev_info(dev, | 
|  | "SoundWire master %d is disabled, will be ignored\n", | 
|  | bus->link_id); | 
|  | /* | 
|  | * Ignore BIOS err_threshold, it's a really bad idea when dealing | 
|  | * with multiple hardware synchronized links | 
|  | */ | 
|  | bus->prop.err_threshold = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int intel_link_startup(struct auxiliary_device *auxdev) | 
|  | { | 
|  | struct device *dev = &auxdev->dev; | 
|  | struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | int link_flags; | 
|  | bool multi_link; | 
|  | u32 clock_stop_quirks; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled) { | 
|  | dev_info(dev, | 
|  | "SoundWire master %d is disabled, ignoring\n", | 
|  | sdw->instance); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | link_flags = md_flags >> (bus->link_id * 8); | 
|  | multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK); | 
|  | if (!multi_link) { | 
|  | dev_dbg(dev, "Multi-link is disabled\n"); | 
|  | } else { | 
|  | /* | 
|  | * hardware-based synchronization is required regardless | 
|  | * of the number of segments used by a stream: SSP-based | 
|  | * synchronization is gated by gsync when the multi-master | 
|  | * mode is set. | 
|  | */ | 
|  | bus->hw_sync_min_links = 1; | 
|  | } | 
|  | bus->multi_link = multi_link; | 
|  |  | 
|  | /* Initialize shim, controller */ | 
|  | ret = sdw_intel_link_power_up(sdw); | 
|  | if (ret) | 
|  | goto err_init; | 
|  |  | 
|  | /* Register DAIs */ | 
|  | ret = sdw_intel_register_dai(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "DAI registration failed: %d\n", ret); | 
|  | goto err_power_up; | 
|  | } | 
|  |  | 
|  | sdw_intel_debugfs_init(sdw); | 
|  |  | 
|  | /* Enable runtime PM */ | 
|  | if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) { | 
|  | pm_runtime_set_autosuspend_delay(dev, | 
|  | INTEL_MASTER_SUSPEND_DELAY_MS); | 
|  | pm_runtime_use_autosuspend(dev); | 
|  | pm_runtime_mark_last_busy(dev); | 
|  |  | 
|  | pm_runtime_set_active(dev); | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | pm_runtime_resume(bus->dev); | 
|  | } | 
|  |  | 
|  | /* start bus */ | 
|  | ret = sdw_intel_start_bus(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "bus start failed: %d\n", ret); | 
|  | goto err_pm_runtime; | 
|  | } | 
|  |  | 
|  | clock_stop_quirks = sdw->link_res->clock_stop_quirks; | 
|  | if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) { | 
|  | /* | 
|  | * To keep the clock running we need to prevent | 
|  | * pm_runtime suspend from happening by increasing the | 
|  | * reference count. | 
|  | * This quirk is specified by the parent PCI device in | 
|  | * case of specific latency requirements. It will have | 
|  | * no effect if pm_runtime is disabled by the user via | 
|  | * a module parameter for testing purposes. | 
|  | */ | 
|  | pm_runtime_get_noresume(dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The runtime PM status of Slave devices is "Unsupported" | 
|  | * until they report as ATTACHED. If they don't, e.g. because | 
|  | * there are no Slave devices populated or if the power-on is | 
|  | * delayed or dependent on a power switch, the Master will | 
|  | * remain active and prevent its parent from suspending. | 
|  | * | 
|  | * Conditionally force the pm_runtime core to re-evaluate the | 
|  | * Master status in the absence of any Slave activity. A quirk | 
|  | * is provided to e.g. deal with Slaves that may be powered on | 
|  | * with a delay. A more complete solution would require the | 
|  | * definition of Master properties. | 
|  | */ | 
|  | if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) { | 
|  | pm_runtime_mark_last_busy(bus->dev); | 
|  | pm_runtime_mark_last_busy(dev); | 
|  | pm_runtime_idle(dev); | 
|  | } | 
|  |  | 
|  | sdw->startup_done = true; | 
|  | return 0; | 
|  |  | 
|  | err_pm_runtime: | 
|  | if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) | 
|  | pm_runtime_disable(dev); | 
|  | err_power_up: | 
|  | sdw_intel_link_power_down(sdw); | 
|  | err_init: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void intel_link_remove(struct auxiliary_device *auxdev) | 
|  | { | 
|  | struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  |  | 
|  | /* | 
|  | * Since pm_runtime is already disabled, we don't decrease | 
|  | * the refcount when the clock_stop_quirk is | 
|  | * SDW_INTEL_CLK_STOP_NOT_ALLOWED | 
|  | */ | 
|  | if (!bus->prop.hw_disabled) { | 
|  | sdw_intel_debugfs_exit(sdw); | 
|  | cancel_delayed_work_sync(&cdns->attach_dwork); | 
|  | sdw_cdns_enable_interrupt(cdns, false); | 
|  | } | 
|  | sdw_bus_master_delete(bus); | 
|  | } | 
|  |  | 
|  | int intel_link_process_wakeen_event(struct auxiliary_device *auxdev) | 
|  | { | 
|  | struct device *dev = &auxdev->dev; | 
|  | struct sdw_intel *sdw; | 
|  | struct sdw_bus *bus; | 
|  |  | 
|  | sdw = auxiliary_get_drvdata(auxdev); | 
|  | bus = &sdw->cdns.bus; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!sdw_intel_shim_check_wake(sdw)) | 
|  | return 0; | 
|  |  | 
|  | /* disable WAKEEN interrupt ASAP to prevent interrupt flood */ | 
|  | sdw_intel_shim_wake(sdw, false); | 
|  |  | 
|  | /* | 
|  | * resume the Master, which will generate a bus reset and result in | 
|  | * Slaves re-attaching and be re-enumerated. The SoundWire physical | 
|  | * device which generated the wake will trigger an interrupt, which | 
|  | * will in turn cause the corresponding Linux Slave device to be | 
|  | * resumed and the Slave codec driver to check the status. | 
|  | */ | 
|  | pm_request_resume(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PM calls | 
|  | */ | 
|  |  | 
|  | int intel_resume_child_device(struct device *dev, void *data) | 
|  | { | 
|  | int ret; | 
|  | struct sdw_slave *slave = dev_to_sdw_dev(dev); | 
|  |  | 
|  | if (!slave->probed) { | 
|  | dev_dbg(dev, "skipping device, no probed driver\n"); | 
|  | return 0; | 
|  | } | 
|  | if (!slave->dev_num_sticky) { | 
|  | dev_dbg(dev, "skipping device, never detected on bus\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ret = pm_runtime_resume(dev); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: pm_runtime_resume failed: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused intel_pm_prepare(struct device *dev) | 
|  | { | 
|  | struct sdw_cdns *cdns = dev_get_drvdata(dev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | u32 clock_stop_quirks; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | clock_stop_quirks = sdw->link_res->clock_stop_quirks; | 
|  |  | 
|  | if (pm_runtime_suspended(dev) && | 
|  | pm_runtime_suspended(dev->parent) && | 
|  | ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || | 
|  | !clock_stop_quirks)) { | 
|  | /* | 
|  | * if we've enabled clock stop, and the parent is suspended, the SHIM registers | 
|  | * are not accessible and the shim wake cannot be disabled. | 
|  | * The only solution is to resume the entire bus to full power | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * If any operation in this block fails, we keep going since we don't want | 
|  | * to prevent system suspend from happening and errors should be recoverable | 
|  | * on resume. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * first resume the device for this link. This will also by construction | 
|  | * resume the PCI parent device. | 
|  | */ | 
|  | ret = pm_runtime_resume(dev); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: pm_runtime_resume failed: %d\n", __func__, ret); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Continue resuming the entire bus (parent + child devices) to exit | 
|  | * the clock stop mode. If there are no devices connected on this link | 
|  | * this is a no-op. | 
|  | * The resume to full power could have been implemented with a .prepare | 
|  | * step in SoundWire codec drivers. This would however require a lot | 
|  | * of code to handle an Intel-specific corner case. It is simpler in | 
|  | * practice to add a loop at the link level. | 
|  | */ | 
|  | ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device); | 
|  |  | 
|  | if (ret < 0) | 
|  | dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused intel_suspend(struct device *dev) | 
|  | { | 
|  | struct sdw_cdns *cdns = dev_get_drvdata(dev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | u32 clock_stop_quirks; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (pm_runtime_suspended(dev)) { | 
|  | dev_dbg(dev, "pm_runtime status: suspended\n"); | 
|  |  | 
|  | clock_stop_quirks = sdw->link_res->clock_stop_quirks; | 
|  |  | 
|  | if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || | 
|  | !clock_stop_quirks) { | 
|  |  | 
|  | if (pm_runtime_suspended(dev->parent)) { | 
|  | /* | 
|  | * paranoia check: this should not happen with the .prepare | 
|  | * resume to full power | 
|  | */ | 
|  | dev_err(dev, "%s: invalid config: parent is suspended\n", __func__); | 
|  | } else { | 
|  | sdw_intel_shim_wake(sdw, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ret = sdw_intel_stop_bus(sdw, false); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused intel_suspend_runtime(struct device *dev) | 
|  | { | 
|  | struct sdw_cdns *cdns = dev_get_drvdata(dev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | u32 clock_stop_quirks; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | clock_stop_quirks = sdw->link_res->clock_stop_quirks; | 
|  |  | 
|  | if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { | 
|  | ret = sdw_intel_stop_bus(sdw, false); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot stop bus during teardown: %d\n", | 
|  | __func__, ret); | 
|  | return ret; | 
|  | } | 
|  | } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) { | 
|  | ret = sdw_intel_stop_bus(sdw, true); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n", | 
|  | __func__, ret); | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | dev_err(dev, "%s clock_stop_quirks %x unsupported\n", | 
|  | __func__, clock_stop_quirks); | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused intel_resume(struct device *dev) | 
|  | { | 
|  | struct sdw_cdns *cdns = dev_get_drvdata(dev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | int link_flags; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (pm_runtime_suspended(dev)) { | 
|  | dev_dbg(dev, "pm_runtime status was suspended, forcing active\n"); | 
|  |  | 
|  | /* follow required sequence from runtime_pm.rst */ | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_set_active(dev); | 
|  | pm_runtime_mark_last_busy(dev); | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | pm_runtime_resume(bus->dev); | 
|  |  | 
|  | link_flags = md_flags >> (bus->link_id * 8); | 
|  |  | 
|  | if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) | 
|  | pm_runtime_idle(dev); | 
|  | } | 
|  |  | 
|  | ret = sdw_intel_link_power_up(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "%s failed: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * make sure all Slaves are tagged as UNATTACHED and provide | 
|  | * reason for reinitialization | 
|  | */ | 
|  | sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); | 
|  |  | 
|  | ret = sdw_intel_start_bus(sdw); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "cannot start bus during resume\n"); | 
|  | sdw_intel_link_power_down(sdw); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * after system resume, the pm_runtime suspend() may kick in | 
|  | * during the enumeration, before any children device force the | 
|  | * master device to remain active.  Using pm_runtime_get() | 
|  | * routines is not really possible, since it'd prevent the | 
|  | * master from suspending. | 
|  | * A reasonable compromise is to update the pm_runtime | 
|  | * counters and delay the pm_runtime suspend by several | 
|  | * seconds, by when all enumeration should be complete. | 
|  | */ | 
|  | pm_runtime_mark_last_busy(bus->dev); | 
|  | pm_runtime_mark_last_busy(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused intel_resume_runtime(struct device *dev) | 
|  | { | 
|  | struct sdw_cdns *cdns = dev_get_drvdata(dev); | 
|  | struct sdw_intel *sdw = cdns_to_intel(cdns); | 
|  | struct sdw_bus *bus = &cdns->bus; | 
|  | u32 clock_stop_quirks; | 
|  | int ret; | 
|  |  | 
|  | if (bus->prop.hw_disabled || !sdw->startup_done) { | 
|  | dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", | 
|  | bus->link_id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* unconditionally disable WAKEEN interrupt */ | 
|  | sdw_intel_shim_wake(sdw, false); | 
|  |  | 
|  | clock_stop_quirks = sdw->link_res->clock_stop_quirks; | 
|  |  | 
|  | if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { | 
|  | ret = sdw_intel_link_power_up(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * make sure all Slaves are tagged as UNATTACHED and provide | 
|  | * reason for reinitialization | 
|  | */ | 
|  | sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); | 
|  |  | 
|  | ret = sdw_intel_start_bus(sdw); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret); | 
|  | sdw_intel_link_power_down(sdw); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) { | 
|  | ret = sdw_intel_link_power_up(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = sdw_intel_start_bus_after_reset(sdw); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret); | 
|  | sdw_intel_link_power_down(sdw); | 
|  | return ret; | 
|  | } | 
|  | } else if (!clock_stop_quirks) { | 
|  |  | 
|  | sdw_intel_check_clock_stop(sdw); | 
|  |  | 
|  | ret = sdw_intel_link_power_up(sdw); | 
|  | if (ret) { | 
|  | dev_err(dev, "%s: power_up failed: %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = sdw_intel_start_bus_after_clock_stop(sdw); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret); | 
|  | sdw_intel_link_power_down(sdw); | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | dev_err(dev, "%s: clock_stop_quirks %x unsupported\n", | 
|  | __func__, clock_stop_quirks); | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops intel_pm = { | 
|  | .prepare = intel_pm_prepare, | 
|  | SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume) | 
|  | SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL) | 
|  | }; | 
|  |  | 
|  | static const struct auxiliary_device_id intel_link_id_table[] = { | 
|  | { .name = "soundwire_intel.link" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table); | 
|  |  | 
|  | static struct auxiliary_driver sdw_intel_drv = { | 
|  | .probe = intel_link_probe, | 
|  | .remove = intel_link_remove, | 
|  | .driver = { | 
|  | /* auxiliary_driver_register() sets .name to be the modname */ | 
|  | .pm = &intel_pm, | 
|  | }, | 
|  | .id_table = intel_link_id_table | 
|  | }; | 
|  | module_auxiliary_driver(sdw_intel_drv); | 
|  |  | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_DESCRIPTION("Intel Soundwire Link Driver"); |