| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * MLO link handling | |
| * | |
| * Copyright (C) 2022-2024 Intel Corporation | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/kernel.h> | |
| #include <net/mac80211.h> | |
| #include "ieee80211_i.h" | |
| #include "driver-ops.h" | |
| #include "key.h" | |
| #include "debugfs_netdev.h" | |
| void ieee80211_link_setup(struct ieee80211_link_data *link) | |
| { | |
| if (link->sdata->vif.type == NL80211_IFTYPE_STATION) | |
| ieee80211_mgd_setup_link(link); | |
| } | |
| void ieee80211_link_init(struct ieee80211_sub_if_data *sdata, | |
| int link_id, | |
| struct ieee80211_link_data *link, | |
| struct ieee80211_bss_conf *link_conf) | |
| { | |
| bool deflink = link_id < 0; | |
| if (link_id < 0) | |
| link_id = 0; | |
| rcu_assign_pointer(sdata->vif.link_conf[link_id], link_conf); | |
| rcu_assign_pointer(sdata->link[link_id], link); | |
| link->sdata = sdata; | |
| link->link_id = link_id; | |
| link->conf = link_conf; | |
| link_conf->link_id = link_id; | |
| link_conf->vif = &sdata->vif; | |
| wiphy_work_init(&link->csa.finalize_work, | |
| ieee80211_csa_finalize_work); | |
| wiphy_work_init(&link->color_change_finalize_work, | |
| ieee80211_color_change_finalize_work); | |
| INIT_DELAYED_WORK(&link->color_collision_detect_work, | |
| ieee80211_color_collision_detection_work); | |
| INIT_LIST_HEAD(&link->assigned_chanctx_list); | |
| INIT_LIST_HEAD(&link->reserved_chanctx_list); | |
| wiphy_delayed_work_init(&link->dfs_cac_timer_work, | |
| ieee80211_dfs_cac_timer_work); | |
| if (!deflink) { | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| ether_addr_copy(link_conf->addr, | |
| sdata->wdev.links[link_id].addr); | |
| link_conf->bssid = link_conf->addr; | |
| WARN_ON(!(sdata->wdev.valid_links & BIT(link_id))); | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| /* station sets the bssid in ieee80211_mgd_setup_link */ | |
| break; | |
| default: | |
| WARN_ON(1); | |
| } | |
| ieee80211_link_debugfs_add(link); | |
| } | |
| } | |
| void ieee80211_link_stop(struct ieee80211_link_data *link) | |
| { | |
| if (link->sdata->vif.type == NL80211_IFTYPE_STATION) | |
| ieee80211_mgd_stop_link(link); | |
| cancel_delayed_work_sync(&link->color_collision_detect_work); | |
| wiphy_work_cancel(link->sdata->local->hw.wiphy, | |
| &link->color_change_finalize_work); | |
| wiphy_work_cancel(link->sdata->local->hw.wiphy, | |
| &link->csa.finalize_work); | |
| if (link->sdata->wdev.links[link->link_id].cac_started) { | |
| wiphy_delayed_work_cancel(link->sdata->local->hw.wiphy, | |
| &link->dfs_cac_timer_work); | |
| cfg80211_cac_event(link->sdata->dev, | |
| &link->conf->chanreq.oper, | |
| NL80211_RADAR_CAC_ABORTED, | |
| GFP_KERNEL, link->link_id); | |
| } | |
| ieee80211_link_release_channel(link); | |
| } | |
| struct link_container { | |
| struct ieee80211_link_data data; | |
| struct ieee80211_bss_conf conf; | |
| }; | |
| static void ieee80211_tear_down_links(struct ieee80211_sub_if_data *sdata, | |
| struct link_container **links, u16 mask) | |
| { | |
| struct ieee80211_link_data *link; | |
| LIST_HEAD(keys); | |
| unsigned int link_id; | |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { | |
| if (!(mask & BIT(link_id))) | |
| continue; | |
| link = &links[link_id]->data; | |
| if (link_id == 0 && !link) | |
| link = &sdata->deflink; | |
| if (WARN_ON(!link)) | |
| continue; | |
| ieee80211_remove_link_keys(link, &keys); | |
| ieee80211_link_debugfs_remove(link); | |
| ieee80211_link_stop(link); | |
| } | |
| synchronize_rcu(); | |
| ieee80211_free_key_list(sdata->local, &keys); | |
| } | |
| static void ieee80211_free_links(struct ieee80211_sub_if_data *sdata, | |
| struct link_container **links) | |
| { | |
| unsigned int link_id; | |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) | |
| kfree(links[link_id]); | |
| } | |
| static int ieee80211_check_dup_link_addrs(struct ieee80211_sub_if_data *sdata) | |
| { | |
| unsigned int i, j; | |
| for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) { | |
| struct ieee80211_link_data *link1; | |
| link1 = sdata_dereference(sdata->link[i], sdata); | |
| if (!link1) | |
| continue; | |
| for (j = i + 1; j < IEEE80211_MLD_MAX_NUM_LINKS; j++) { | |
| struct ieee80211_link_data *link2; | |
| link2 = sdata_dereference(sdata->link[j], sdata); | |
| if (!link2) | |
| continue; | |
| if (ether_addr_equal(link1->conf->addr, | |
| link2->conf->addr)) | |
| return -EALREADY; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void ieee80211_set_vif_links_bitmaps(struct ieee80211_sub_if_data *sdata, | |
| u16 valid_links, u16 dormant_links) | |
| { | |
| sdata->vif.valid_links = valid_links; | |
| sdata->vif.dormant_links = dormant_links; | |
| if (!valid_links || | |
| WARN((~valid_links & dormant_links) || | |
| !(valid_links & ~dormant_links), | |
| "Invalid links: valid=0x%x, dormant=0x%x", | |
| valid_links, dormant_links)) { | |
| sdata->vif.active_links = 0; | |
| sdata->vif.dormant_links = 0; | |
| return; | |
| } | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| /* in an AP all links are always active */ | |
| sdata->vif.active_links = valid_links; | |
| /* AP links are not expected to be disabled */ | |
| WARN_ON(dormant_links); | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| if (sdata->vif.active_links) | |
| break; | |
| sdata->vif.active_links = valid_links & ~dormant_links; | |
| WARN_ON(hweight16(sdata->vif.active_links) > 1); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| } | |
| } | |
| static int ieee80211_vif_update_links(struct ieee80211_sub_if_data *sdata, | |
| struct link_container **to_free, | |
| u16 new_links, u16 dormant_links) | |
| { | |
| u16 old_links = sdata->vif.valid_links; | |
| u16 old_active = sdata->vif.active_links; | |
| unsigned long add = new_links & ~old_links; | |
| unsigned long rem = old_links & ~new_links; | |
| unsigned int link_id; | |
| int ret; | |
| struct link_container *links[IEEE80211_MLD_MAX_NUM_LINKS] = {}, *link; | |
| struct ieee80211_bss_conf *old[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| struct ieee80211_link_data *old_data[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| bool use_deflink = old_links == 0; /* set for error case */ | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| memset(to_free, 0, sizeof(links)); | |
| if (old_links == new_links && dormant_links == sdata->vif.dormant_links) | |
| return 0; | |
| /* if there were no old links, need to clear the pointers to deflink */ | |
| if (!old_links) | |
| rem |= BIT(0); | |
| /* allocate new link structures first */ | |
| for_each_set_bit(link_id, &add, IEEE80211_MLD_MAX_NUM_LINKS) { | |
| link = kzalloc(sizeof(*link), GFP_KERNEL); | |
| if (!link) { | |
| ret = -ENOMEM; | |
| goto free; | |
| } | |
| links[link_id] = link; | |
| } | |
| /* keep track of the old pointers for the driver */ | |
| BUILD_BUG_ON(sizeof(old) != sizeof(sdata->vif.link_conf)); | |
| memcpy(old, sdata->vif.link_conf, sizeof(old)); | |
| /* and for us in error cases */ | |
| BUILD_BUG_ON(sizeof(old_data) != sizeof(sdata->link)); | |
| memcpy(old_data, sdata->link, sizeof(old_data)); | |
| /* grab old links to free later */ | |
| for_each_set_bit(link_id, &rem, IEEE80211_MLD_MAX_NUM_LINKS) { | |
| if (rcu_access_pointer(sdata->link[link_id]) != &sdata->deflink) { | |
| /* | |
| * we must have allocated the data through this path so | |
| * we know we can free both at the same time | |
| */ | |
| to_free[link_id] = container_of(rcu_access_pointer(sdata->link[link_id]), | |
| typeof(*links[link_id]), | |
| data); | |
| } | |
| RCU_INIT_POINTER(sdata->link[link_id], NULL); | |
| RCU_INIT_POINTER(sdata->vif.link_conf[link_id], NULL); | |
| } | |
| if (!old_links) | |
| ieee80211_debugfs_recreate_netdev(sdata, true); | |
| /* link them into data structures */ | |
| for_each_set_bit(link_id, &add, IEEE80211_MLD_MAX_NUM_LINKS) { | |
| WARN_ON(!use_deflink && | |
| rcu_access_pointer(sdata->link[link_id]) == &sdata->deflink); | |
| link = links[link_id]; | |
| ieee80211_link_init(sdata, link_id, &link->data, &link->conf); | |
| ieee80211_link_setup(&link->data); | |
| } | |
| if (new_links == 0) | |
| ieee80211_link_init(sdata, -1, &sdata->deflink, | |
| &sdata->vif.bss_conf); | |
| ret = ieee80211_check_dup_link_addrs(sdata); | |
| if (!ret) { | |
| /* for keys we will not be able to undo this */ | |
| ieee80211_tear_down_links(sdata, to_free, rem); | |
| ieee80211_set_vif_links_bitmaps(sdata, new_links, dormant_links); | |
| /* tell the driver */ | |
| ret = drv_change_vif_links(sdata->local, sdata, | |
| old_links & old_active, | |
| new_links & sdata->vif.active_links, | |
| old); | |
| if (!new_links) | |
| ieee80211_debugfs_recreate_netdev(sdata, false); | |
| } | |
| if (ret) { | |
| /* restore config */ | |
| memcpy(sdata->link, old_data, sizeof(old_data)); | |
| memcpy(sdata->vif.link_conf, old, sizeof(old)); | |
| ieee80211_set_vif_links_bitmaps(sdata, old_links, dormant_links); | |
| /* and free (only) the newly allocated links */ | |
| memset(to_free, 0, sizeof(links)); | |
| goto free; | |
| } | |
| /* use deflink/bss_conf again if and only if there are no more links */ | |
| use_deflink = new_links == 0; | |
| goto deinit; | |
| free: | |
| /* if we failed during allocation, only free all */ | |
| for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { | |
| kfree(links[link_id]); | |
| links[link_id] = NULL; | |
| } | |
| deinit: | |
| if (use_deflink) | |
| ieee80211_link_init(sdata, -1, &sdata->deflink, | |
| &sdata->vif.bss_conf); | |
| return ret; | |
| } | |
| int ieee80211_vif_set_links(struct ieee80211_sub_if_data *sdata, | |
| u16 new_links, u16 dormant_links) | |
| { | |
| struct link_container *links[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| int ret; | |
| ret = ieee80211_vif_update_links(sdata, links, new_links, | |
| dormant_links); | |
| ieee80211_free_links(sdata, links); | |
| return ret; | |
| } | |
| static int _ieee80211_set_active_links(struct ieee80211_sub_if_data *sdata, | |
| u16 active_links) | |
| { | |
| struct ieee80211_bss_conf *link_confs[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| struct ieee80211_local *local = sdata->local; | |
| u16 old_active = sdata->vif.active_links; | |
| unsigned long rem = old_active & ~active_links; | |
| unsigned long add = active_links & ~old_active; | |
| struct sta_info *sta; | |
| unsigned int link_id; | |
| int ret, i; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return -ENETDOWN; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return -EINVAL; | |
| if (active_links & ~ieee80211_vif_usable_links(&sdata->vif)) | |
| return -EINVAL; | |
| /* nothing to do */ | |
| if (old_active == active_links) | |
| return 0; | |
| for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) | |
| link_confs[i] = sdata_dereference(sdata->vif.link_conf[i], | |
| sdata); | |
| if (add) { | |
| sdata->vif.active_links |= active_links; | |
| ret = drv_change_vif_links(local, sdata, | |
| old_active, | |
| sdata->vif.active_links, | |
| link_confs); | |
| if (ret) { | |
| sdata->vif.active_links = old_active; | |
| return ret; | |
| } | |
| } | |
| for_each_set_bit(link_id, &rem, IEEE80211_MLD_MAX_NUM_LINKS) { | |
| struct ieee80211_link_data *link; | |
| link = sdata_dereference(sdata->link[link_id], sdata); | |
| ieee80211_teardown_tdls_peers(link); | |
| __ieee80211_link_release_channel(link, true); | |
| /* | |
| * If CSA is (still) active while the link is deactivated, | |
| * just schedule the channel switch work for the time we | |
| * had previously calculated, and we'll take the process | |
| * from there. | |
| */ | |
| if (link->conf->csa_active) | |
| wiphy_delayed_work_queue(local->hw.wiphy, | |
| &link->u.mgd.csa.switch_work, | |
| link->u.mgd.csa.time - | |
| jiffies); | |
| } | |
| list_for_each_entry(sta, &local->sta_list, list) { | |
| if (sdata != sta->sdata) | |
| continue; | |
| /* this is very temporary, but do it anyway */ | |
| __ieee80211_sta_recalc_aggregates(sta, | |
| old_active | active_links); | |
| ret = drv_change_sta_links(local, sdata, &sta->sta, | |
| old_active, | |
| old_active | active_links); | |
| WARN_ON_ONCE(ret); | |
| } | |
| ret = ieee80211_key_switch_links(sdata, rem, add); | |
| WARN_ON_ONCE(ret); | |
| list_for_each_entry(sta, &local->sta_list, list) { | |
| if (sdata != sta->sdata) | |
| continue; | |
| __ieee80211_sta_recalc_aggregates(sta, active_links); | |
| ret = drv_change_sta_links(local, sdata, &sta->sta, | |
| old_active | active_links, | |
| active_links); | |
| WARN_ON_ONCE(ret); | |
| /* | |
| * Do it again, just in case - the driver might very | |
| * well have called ieee80211_sta_recalc_aggregates() | |
| * from there when filling in the new links, which | |
| * would set it wrong since the vif's active links are | |
| * not switched yet... | |
| */ | |
| __ieee80211_sta_recalc_aggregates(sta, active_links); | |
| } | |
| for_each_set_bit(link_id, &add, IEEE80211_MLD_MAX_NUM_LINKS) { | |
| struct ieee80211_link_data *link; | |
| link = sdata_dereference(sdata->link[link_id], sdata); | |
| /* | |
| * This call really should not fail. Unfortunately, it appears | |
| * that this may happen occasionally with some drivers. Should | |
| * it happen, we are stuck in a bad place as going backwards is | |
| * not really feasible. | |
| * | |
| * So lets just tell link_use_channel that it must not fail to | |
| * assign the channel context (from mac80211's perspective) and | |
| * assume the driver is going to trigger a recovery flow if it | |
| * had a failure. | |
| * That really is not great nor guaranteed to work. But at least | |
| * the internal mac80211 state remains consistent and there is | |
| * a chance that we can recover. | |
| */ | |
| ret = _ieee80211_link_use_channel(link, | |
| &link->conf->chanreq, | |
| IEEE80211_CHANCTX_SHARED, | |
| true); | |
| WARN_ON_ONCE(ret); | |
| ieee80211_mgd_set_link_qos_params(link); | |
| ieee80211_link_info_change_notify(sdata, link, | |
| BSS_CHANGED_ERP_CTS_PROT | | |
| BSS_CHANGED_ERP_PREAMBLE | | |
| BSS_CHANGED_ERP_SLOT | | |
| BSS_CHANGED_HT | | |
| BSS_CHANGED_BASIC_RATES | | |
| BSS_CHANGED_BSSID | | |
| BSS_CHANGED_CQM | | |
| BSS_CHANGED_QOS | | |
| BSS_CHANGED_TXPOWER | | |
| BSS_CHANGED_BANDWIDTH | | |
| BSS_CHANGED_TWT | | |
| BSS_CHANGED_HE_OBSS_PD | | |
| BSS_CHANGED_HE_BSS_COLOR); | |
| } | |
| old_active = sdata->vif.active_links; | |
| sdata->vif.active_links = active_links; | |
| if (rem) { | |
| ret = drv_change_vif_links(local, sdata, old_active, | |
| active_links, link_confs); | |
| WARN_ON_ONCE(ret); | |
| } | |
| return 0; | |
| } | |
| int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links) | |
| { | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| struct ieee80211_local *local = sdata->local; | |
| u16 old_active; | |
| int ret; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| if (WARN_ON(!active_links)) | |
| return -EINVAL; | |
| old_active = sdata->vif.active_links; | |
| if (old_active == active_links) | |
| return 0; | |
| if (!drv_can_activate_links(local, sdata, active_links)) | |
| return -EINVAL; | |
| if (old_active & active_links) { | |
| /* | |
| * if there's at least one link that stays active across | |
| * the change then switch to it (to those) first, and | |
| * then enable the additional links | |
| */ | |
| ret = _ieee80211_set_active_links(sdata, | |
| old_active & active_links); | |
| if (!ret) | |
| ret = _ieee80211_set_active_links(sdata, active_links); | |
| } else { | |
| /* otherwise switch directly */ | |
| ret = _ieee80211_set_active_links(sdata, active_links); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ieee80211_set_active_links); | |
| void ieee80211_set_active_links_async(struct ieee80211_vif *vif, | |
| u16 active_links) | |
| { | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| if (WARN_ON(!active_links)) | |
| return; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return; | |
| if (active_links & ~ieee80211_vif_usable_links(&sdata->vif)) | |
| return; | |
| /* nothing to do */ | |
| if (sdata->vif.active_links == active_links) | |
| return; | |
| sdata->desired_active_links = active_links; | |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->activate_links_work); | |
| } | |
| EXPORT_SYMBOL_GPL(ieee80211_set_active_links_async); |