| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * vimc-scaler.c Virtual Media Controller Driver | |
| * | |
| * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> | |
| */ | |
| #include <linux/moduleparam.h> | |
| #include <linux/string.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/v4l2-mediabus.h> | |
| #include <media/v4l2-rect.h> | |
| #include <media/v4l2-subdev.h> | |
| #include "vimc-common.h" | |
| /* Pad identifier */ | |
| enum vimc_scaler_pad { | |
| VIMC_SCALER_SINK = 0, | |
| VIMC_SCALER_SRC = 1, | |
| }; | |
| #define VIMC_SCALER_FMT_WIDTH_DEFAULT 640 | |
| #define VIMC_SCALER_FMT_HEIGHT_DEFAULT 480 | |
| struct vimc_scaler_device { | |
| struct vimc_ent_device ved; | |
| struct v4l2_subdev sd; | |
| struct media_pad pads[2]; | |
| u8 *src_frame; | |
| /* | |
| * Virtual "hardware" configuration, filled when the stream starts or | |
| * when controls are set. | |
| */ | |
| struct { | |
| struct v4l2_mbus_framefmt sink_fmt; | |
| struct v4l2_mbus_framefmt src_fmt; | |
| struct v4l2_rect sink_crop; | |
| unsigned int bpp; | |
| } hw; | |
| }; | |
| static const struct v4l2_mbus_framefmt fmt_default = { | |
| .width = VIMC_SCALER_FMT_WIDTH_DEFAULT, | |
| .height = VIMC_SCALER_FMT_HEIGHT_DEFAULT, | |
| .code = MEDIA_BUS_FMT_RGB888_1X24, | |
| .field = V4L2_FIELD_NONE, | |
| .colorspace = V4L2_COLORSPACE_SRGB, | |
| }; | |
| static const struct v4l2_rect crop_rect_default = { | |
| .width = VIMC_SCALER_FMT_WIDTH_DEFAULT, | |
| .height = VIMC_SCALER_FMT_HEIGHT_DEFAULT, | |
| .top = 0, | |
| .left = 0, | |
| }; | |
| static const struct v4l2_rect crop_rect_min = { | |
| .width = VIMC_FRAME_MIN_WIDTH, | |
| .height = VIMC_FRAME_MIN_HEIGHT, | |
| .top = 0, | |
| .left = 0, | |
| }; | |
| static struct v4l2_rect | |
| vimc_scaler_get_crop_bound_sink(const struct v4l2_mbus_framefmt *sink_fmt) | |
| { | |
| /* Get the crop bounds to clamp the crop rectangle correctly */ | |
| struct v4l2_rect r = { | |
| .left = 0, | |
| .top = 0, | |
| .width = sink_fmt->width, | |
| .height = sink_fmt->height, | |
| }; | |
| return r; | |
| } | |
| static int vimc_scaler_init_state(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state) | |
| { | |
| struct v4l2_mbus_framefmt *mf; | |
| struct v4l2_rect *r; | |
| unsigned int i; | |
| for (i = 0; i < sd->entity.num_pads; i++) { | |
| mf = v4l2_subdev_state_get_format(sd_state, i); | |
| *mf = fmt_default; | |
| } | |
| r = v4l2_subdev_state_get_crop(sd_state, VIMC_SCALER_SINK); | |
| *r = crop_rect_default; | |
| return 0; | |
| } | |
| static int vimc_scaler_enum_mbus_code(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_mbus_code_enum *code) | |
| { | |
| u32 mbus_code = vimc_mbus_code_by_index(code->index); | |
| const struct vimc_pix_map *vpix; | |
| if (!mbus_code) | |
| return -EINVAL; | |
| vpix = vimc_pix_map_by_code(mbus_code); | |
| /* We don't support bayer format */ | |
| if (!vpix || vpix->bayer) | |
| return -EINVAL; | |
| code->code = mbus_code; | |
| return 0; | |
| } | |
| static int vimc_scaler_enum_frame_size(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_frame_size_enum *fse) | |
| { | |
| const struct vimc_pix_map *vpix; | |
| if (fse->index) | |
| return -EINVAL; | |
| /* Only accept code in the pix map table in non bayer format */ | |
| vpix = vimc_pix_map_by_code(fse->code); | |
| if (!vpix || vpix->bayer) | |
| return -EINVAL; | |
| fse->min_width = VIMC_FRAME_MIN_WIDTH; | |
| fse->min_height = VIMC_FRAME_MIN_HEIGHT; | |
| fse->max_width = VIMC_FRAME_MAX_WIDTH; | |
| fse->max_height = VIMC_FRAME_MAX_HEIGHT; | |
| return 0; | |
| } | |
| static int vimc_scaler_set_fmt(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_format *format) | |
| { | |
| struct vimc_scaler_device *vscaler = v4l2_get_subdevdata(sd); | |
| struct v4l2_mbus_framefmt *fmt; | |
| /* Do not change the active format while stream is on */ | |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && vscaler->src_frame) | |
| return -EBUSY; | |
| fmt = v4l2_subdev_state_get_format(sd_state, format->pad); | |
| /* | |
| * The media bus code and colorspace can only be changed on the sink | |
| * pad, the source pad only follows. | |
| */ | |
| if (format->pad == VIMC_SCALER_SINK) { | |
| const struct vimc_pix_map *vpix; | |
| /* Only accept code in the pix map table in non bayer format. */ | |
| vpix = vimc_pix_map_by_code(format->format.code); | |
| if (vpix && !vpix->bayer) | |
| fmt->code = format->format.code; | |
| else | |
| fmt->code = fmt_default.code; | |
| /* Clamp the colorspace to valid values. */ | |
| fmt->colorspace = format->format.colorspace; | |
| fmt->ycbcr_enc = format->format.ycbcr_enc; | |
| fmt->quantization = format->format.quantization; | |
| fmt->xfer_func = format->format.xfer_func; | |
| vimc_colorimetry_clamp(fmt); | |
| } | |
| /* Clamp and align the width and height */ | |
| fmt->width = clamp_t(u32, format->format.width, VIMC_FRAME_MIN_WIDTH, | |
| VIMC_FRAME_MAX_WIDTH) & ~1; | |
| fmt->height = clamp_t(u32, format->format.height, VIMC_FRAME_MIN_HEIGHT, | |
| VIMC_FRAME_MAX_HEIGHT) & ~1; | |
| /* | |
| * Propagate the sink pad format to the crop rectangle and the source | |
| * pad. | |
| */ | |
| if (format->pad == VIMC_SCALER_SINK) { | |
| struct v4l2_mbus_framefmt *src_fmt; | |
| struct v4l2_rect *crop; | |
| crop = v4l2_subdev_state_get_crop(sd_state, VIMC_SCALER_SINK); | |
| crop->width = fmt->width; | |
| crop->height = fmt->height; | |
| crop->top = 0; | |
| crop->left = 0; | |
| src_fmt = v4l2_subdev_state_get_format(sd_state, VIMC_SCALER_SRC); | |
| *src_fmt = *fmt; | |
| } | |
| format->format = *fmt; | |
| return 0; | |
| } | |
| static int vimc_scaler_get_selection(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_selection *sel) | |
| { | |
| struct v4l2_mbus_framefmt *sink_fmt; | |
| if (VIMC_IS_SRC(sel->pad)) | |
| return -EINVAL; | |
| switch (sel->target) { | |
| case V4L2_SEL_TGT_CROP: | |
| sel->r = *v4l2_subdev_state_get_crop(sd_state, VIMC_SCALER_SINK); | |
| break; | |
| case V4L2_SEL_TGT_CROP_BOUNDS: | |
| sink_fmt = v4l2_subdev_state_get_format(sd_state, VIMC_SCALER_SINK); | |
| sel->r = vimc_scaler_get_crop_bound_sink(sink_fmt); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void vimc_scaler_adjust_sink_crop(struct v4l2_rect *r, | |
| const struct v4l2_mbus_framefmt *sink_fmt) | |
| { | |
| const struct v4l2_rect sink_rect = | |
| vimc_scaler_get_crop_bound_sink(sink_fmt); | |
| /* Disallow rectangles smaller than the minimal one. */ | |
| v4l2_rect_set_min_size(r, &crop_rect_min); | |
| v4l2_rect_map_inside(r, &sink_rect); | |
| } | |
| static int vimc_scaler_set_selection(struct v4l2_subdev *sd, | |
| struct v4l2_subdev_state *sd_state, | |
| struct v4l2_subdev_selection *sel) | |
| { | |
| struct vimc_scaler_device *vscaler = v4l2_get_subdevdata(sd); | |
| struct v4l2_mbus_framefmt *sink_fmt; | |
| struct v4l2_rect *crop_rect; | |
| /* Only support setting the crop of the sink pad */ | |
| if (VIMC_IS_SRC(sel->pad) || sel->target != V4L2_SEL_TGT_CROP) | |
| return -EINVAL; | |
| if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE && vscaler->src_frame) | |
| return -EBUSY; | |
| crop_rect = v4l2_subdev_state_get_crop(sd_state, VIMC_SCALER_SINK); | |
| sink_fmt = v4l2_subdev_state_get_format(sd_state, VIMC_SCALER_SINK); | |
| vimc_scaler_adjust_sink_crop(&sel->r, sink_fmt); | |
| *crop_rect = sel->r; | |
| return 0; | |
| } | |
| static const struct v4l2_subdev_pad_ops vimc_scaler_pad_ops = { | |
| .enum_mbus_code = vimc_scaler_enum_mbus_code, | |
| .enum_frame_size = vimc_scaler_enum_frame_size, | |
| .get_fmt = v4l2_subdev_get_fmt, | |
| .set_fmt = vimc_scaler_set_fmt, | |
| .get_selection = vimc_scaler_get_selection, | |
| .set_selection = vimc_scaler_set_selection, | |
| }; | |
| static int vimc_scaler_s_stream(struct v4l2_subdev *sd, int enable) | |
| { | |
| struct vimc_scaler_device *vscaler = v4l2_get_subdevdata(sd); | |
| if (enable) { | |
| struct v4l2_subdev_state *state; | |
| const struct v4l2_mbus_framefmt *format; | |
| const struct v4l2_rect *rect; | |
| unsigned int frame_size; | |
| if (vscaler->src_frame) | |
| return 0; | |
| state = v4l2_subdev_lock_and_get_active_state(sd); | |
| /* Save the bytes per pixel of the sink. */ | |
| format = v4l2_subdev_state_get_format(state, VIMC_SCALER_SINK); | |
| vscaler->hw.sink_fmt = *format; | |
| vscaler->hw.bpp = vimc_pix_map_by_code(format->code)->bpp; | |
| /* Calculate the frame size of the source pad. */ | |
| format = v4l2_subdev_state_get_format(state, VIMC_SCALER_SRC); | |
| vscaler->hw.src_fmt = *format; | |
| frame_size = format->width * format->height * vscaler->hw.bpp; | |
| rect = v4l2_subdev_state_get_crop(state, VIMC_SCALER_SINK); | |
| vscaler->hw.sink_crop = *rect; | |
| v4l2_subdev_unlock_state(state); | |
| /* | |
| * Allocate the frame buffer. Use vmalloc to be able to allocate | |
| * a large amount of memory. | |
| */ | |
| vscaler->src_frame = vmalloc(frame_size); | |
| if (!vscaler->src_frame) | |
| return -ENOMEM; | |
| } else { | |
| if (!vscaler->src_frame) | |
| return 0; | |
| vfree(vscaler->src_frame); | |
| vscaler->src_frame = NULL; | |
| } | |
| return 0; | |
| } | |
| static const struct v4l2_subdev_video_ops vimc_scaler_video_ops = { | |
| .s_stream = vimc_scaler_s_stream, | |
| }; | |
| static const struct v4l2_subdev_ops vimc_scaler_ops = { | |
| .pad = &vimc_scaler_pad_ops, | |
| .video = &vimc_scaler_video_ops, | |
| }; | |
| static const struct v4l2_subdev_internal_ops vimc_scaler_internal_ops = { | |
| .init_state = vimc_scaler_init_state, | |
| }; | |
| static void vimc_scaler_fill_src_frame(const struct vimc_scaler_device *const vscaler, | |
| const u8 *const sink_frame) | |
| { | |
| const struct v4l2_mbus_framefmt *sink_fmt = &vscaler->hw.sink_fmt; | |
| const struct v4l2_mbus_framefmt *src_fmt = &vscaler->hw.src_fmt; | |
| const struct v4l2_rect *r = &vscaler->hw.sink_crop; | |
| unsigned int src_x, src_y; | |
| u8 *walker = vscaler->src_frame; | |
| /* Set each pixel at the src_frame to its sink_frame equivalent */ | |
| for (src_y = 0; src_y < src_fmt->height; src_y++) { | |
| unsigned int snk_y, y_offset; | |
| snk_y = (src_y * r->height) / src_fmt->height + r->top; | |
| y_offset = snk_y * sink_fmt->width * vscaler->hw.bpp; | |
| for (src_x = 0; src_x < src_fmt->width; src_x++) { | |
| unsigned int snk_x, x_offset, index; | |
| snk_x = (src_x * r->width) / src_fmt->width + r->left; | |
| x_offset = snk_x * vscaler->hw.bpp; | |
| index = y_offset + x_offset; | |
| memcpy(walker, &sink_frame[index], vscaler->hw.bpp); | |
| walker += vscaler->hw.bpp; | |
| } | |
| } | |
| } | |
| static void *vimc_scaler_process_frame(struct vimc_ent_device *ved, | |
| const void *sink_frame) | |
| { | |
| struct vimc_scaler_device *vscaler = container_of(ved, struct vimc_scaler_device, | |
| ved); | |
| /* If the stream in this node is not active, just return */ | |
| if (!vscaler->src_frame) | |
| return ERR_PTR(-EINVAL); | |
| vimc_scaler_fill_src_frame(vscaler, sink_frame); | |
| return vscaler->src_frame; | |
| }; | |
| static void vimc_scaler_release(struct vimc_ent_device *ved) | |
| { | |
| struct vimc_scaler_device *vscaler = | |
| container_of(ved, struct vimc_scaler_device, ved); | |
| v4l2_subdev_cleanup(&vscaler->sd); | |
| media_entity_cleanup(vscaler->ved.ent); | |
| kfree(vscaler); | |
| } | |
| static struct vimc_ent_device *vimc_scaler_add(struct vimc_device *vimc, | |
| const char *vcfg_name) | |
| { | |
| struct v4l2_device *v4l2_dev = &vimc->v4l2_dev; | |
| struct vimc_scaler_device *vscaler; | |
| int ret; | |
| /* Allocate the vscaler struct */ | |
| vscaler = kzalloc(sizeof(*vscaler), GFP_KERNEL); | |
| if (!vscaler) | |
| return ERR_PTR(-ENOMEM); | |
| /* Initialize ved and sd */ | |
| vscaler->pads[VIMC_SCALER_SINK].flags = MEDIA_PAD_FL_SINK; | |
| vscaler->pads[VIMC_SCALER_SRC].flags = MEDIA_PAD_FL_SOURCE; | |
| ret = vimc_ent_sd_register(&vscaler->ved, &vscaler->sd, v4l2_dev, | |
| vcfg_name, | |
| MEDIA_ENT_F_PROC_VIDEO_SCALER, 2, | |
| vscaler->pads, &vimc_scaler_internal_ops, | |
| &vimc_scaler_ops); | |
| if (ret) { | |
| kfree(vscaler); | |
| return ERR_PTR(ret); | |
| } | |
| vscaler->ved.process_frame = vimc_scaler_process_frame; | |
| vscaler->ved.dev = vimc->mdev.dev; | |
| return &vscaler->ved; | |
| } | |
| const struct vimc_ent_type vimc_scaler_type = { | |
| .add = vimc_scaler_add, | |
| .release = vimc_scaler_release | |
| }; |