| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2021 RenewOutReach |
| * Copyright (C) 2021 Amarula Solutions(India) |
| * |
| * Author: |
| * Jagan Teki <jagan@amarulasolutions.com> |
| * Christopher Vollo <chris@renewoutreach.org> |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_mipi_dsi.h> |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/media-bus-format.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| enum cmd_registers { |
| WR_INPUT_SOURCE = 0x05, /* Write Input Source Select */ |
| WR_EXT_SOURCE_FMT = 0x07, /* Write External Video Source Format */ |
| WR_IMAGE_CROP = 0x10, /* Write Image Crop */ |
| WR_DISPLAY_SIZE = 0x12, /* Write Display Size */ |
| WR_IMAGE_FREEZE = 0x1A, /* Write Image Freeze */ |
| WR_INPUT_IMAGE_SIZE = 0x2E, /* Write External Input Image Size */ |
| WR_RGB_LED_EN = 0x52, /* Write RGB LED Enable */ |
| WR_RGB_LED_CURRENT = 0x54, /* Write RGB LED Current */ |
| WR_RGB_LED_MAX_CURRENT = 0x5C, /* Write RGB LED Max Current */ |
| WR_DSI_HS_CLK = 0xBD, /* Write DSI HS Clock */ |
| RD_DEVICE_ID = 0xD4, /* Read Controller Device ID */ |
| WR_DSI_PORT_EN = 0xD7, /* Write DSI Port Enable */ |
| }; |
| |
| enum input_source { |
| INPUT_EXTERNAL_VIDEO = 0, |
| INPUT_TEST_PATTERN, |
| INPUT_SPLASH_SCREEN, |
| }; |
| |
| #define DEV_ID_MASK GENMASK(3, 0) |
| #define IMAGE_FREESE_EN BIT(0) |
| #define DSI_PORT_EN 0 |
| #define EXT_SOURCE_FMT_DSI 0 |
| #define RED_LED_EN BIT(0) |
| #define GREEN_LED_EN BIT(1) |
| #define BLUE_LED_EN BIT(2) |
| #define LED_MASK GENMASK(2, 0) |
| #define MAX_BYTE_SIZE 8 |
| |
| struct dlpc { |
| struct device *dev; |
| struct drm_bridge bridge; |
| struct drm_bridge *next_bridge; |
| struct device_node *host_node; |
| struct mipi_dsi_device *dsi; |
| struct drm_display_mode mode; |
| |
| struct gpio_desc *enable_gpio; |
| struct regulator *vcc_intf; |
| struct regulator *vcc_flsh; |
| struct regmap *regmap; |
| unsigned int dsi_lanes; |
| }; |
| |
| static inline struct dlpc *bridge_to_dlpc(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct dlpc, bridge); |
| } |
| |
| static bool dlpc_writeable_noinc_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case WR_IMAGE_CROP: |
| case WR_DISPLAY_SIZE: |
| case WR_INPUT_IMAGE_SIZE: |
| case WR_DSI_HS_CLK: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_range dlpc_volatile_ranges[] = { |
| { .range_min = 0x10, .range_max = 0xBF }, |
| }; |
| |
| static const struct regmap_access_table dlpc_volatile_table = { |
| .yes_ranges = dlpc_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dlpc_volatile_ranges), |
| }; |
| |
| static struct regmap_config dlpc_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = WR_DSI_PORT_EN, |
| .writeable_noinc_reg = dlpc_writeable_noinc_reg, |
| .volatile_table = &dlpc_volatile_table, |
| .cache_type = REGCACHE_MAPLE, |
| .name = "dlpc3433", |
| }; |
| |
| static void dlpc_atomic_enable(struct drm_bridge *bridge, |
| struct drm_bridge_state *old_bridge_state) |
| { |
| struct dlpc *dlpc = bridge_to_dlpc(bridge); |
| struct device *dev = dlpc->dev; |
| struct drm_display_mode *mode = &dlpc->mode; |
| struct regmap *regmap = dlpc->regmap; |
| char buf[MAX_BYTE_SIZE]; |
| unsigned int devid; |
| |
| regmap_read(regmap, RD_DEVICE_ID, &devid); |
| devid &= DEV_ID_MASK; |
| |
| DRM_DEV_DEBUG(dev, "DLPC3433 device id: 0x%02x\n", devid); |
| |
| if (devid != 0x01) { |
| DRM_DEV_ERROR(dev, "Unsupported DLPC device id: 0x%02x\n", devid); |
| return; |
| } |
| |
| /* disable image freeze */ |
| regmap_write(regmap, WR_IMAGE_FREEZE, IMAGE_FREESE_EN); |
| |
| /* enable DSI port */ |
| regmap_write(regmap, WR_DSI_PORT_EN, DSI_PORT_EN); |
| |
| memset(buf, 0, MAX_BYTE_SIZE); |
| |
| /* set image crop */ |
| buf[4] = mode->hdisplay & 0xff; |
| buf[5] = (mode->hdisplay & 0xff00) >> 8; |
| buf[6] = mode->vdisplay & 0xff; |
| buf[7] = (mode->vdisplay & 0xff00) >> 8; |
| regmap_noinc_write(regmap, WR_IMAGE_CROP, buf, MAX_BYTE_SIZE); |
| |
| /* set display size */ |
| buf[4] = mode->hdisplay & 0xff; |
| buf[5] = (mode->hdisplay & 0xff00) >> 8; |
| buf[6] = mode->vdisplay & 0xff; |
| buf[7] = (mode->vdisplay & 0xff00) >> 8; |
| regmap_noinc_write(regmap, WR_DISPLAY_SIZE, buf, MAX_BYTE_SIZE); |
| |
| /* set input image size */ |
| buf[0] = mode->hdisplay & 0xff; |
| buf[1] = (mode->hdisplay & 0xff00) >> 8; |
| buf[2] = mode->vdisplay & 0xff; |
| buf[3] = (mode->vdisplay & 0xff00) >> 8; |
| regmap_noinc_write(regmap, WR_INPUT_IMAGE_SIZE, buf, 4); |
| |
| /* set external video port */ |
| regmap_write(regmap, WR_INPUT_SOURCE, INPUT_EXTERNAL_VIDEO); |
| |
| /* set external video format select as DSI */ |
| regmap_write(regmap, WR_EXT_SOURCE_FMT, EXT_SOURCE_FMT_DSI); |
| |
| /* disable image freeze */ |
| regmap_write(regmap, WR_IMAGE_FREEZE, 0x00); |
| |
| /* enable RGB led */ |
| regmap_update_bits(regmap, WR_RGB_LED_EN, LED_MASK, |
| RED_LED_EN | GREEN_LED_EN | BLUE_LED_EN); |
| |
| msleep(10); |
| } |
| |
| static void dlpc_atomic_pre_enable(struct drm_bridge *bridge, |
| struct drm_bridge_state *old_bridge_state) |
| { |
| struct dlpc *dlpc = bridge_to_dlpc(bridge); |
| int ret; |
| |
| gpiod_set_value(dlpc->enable_gpio, 1); |
| |
| msleep(500); |
| |
| ret = regulator_enable(dlpc->vcc_intf); |
| if (ret) |
| DRM_DEV_ERROR(dlpc->dev, |
| "failed to enable VCC_INTF regulator: %d\n", ret); |
| |
| ret = regulator_enable(dlpc->vcc_flsh); |
| if (ret) |
| DRM_DEV_ERROR(dlpc->dev, |
| "failed to enable VCC_FLSH regulator: %d\n", ret); |
| |
| msleep(10); |
| } |
| |
| static void dlpc_atomic_post_disable(struct drm_bridge *bridge, |
| struct drm_bridge_state *old_bridge_state) |
| { |
| struct dlpc *dlpc = bridge_to_dlpc(bridge); |
| |
| regulator_disable(dlpc->vcc_flsh); |
| regulator_disable(dlpc->vcc_intf); |
| |
| msleep(10); |
| |
| gpiod_set_value(dlpc->enable_gpio, 0); |
| |
| msleep(500); |
| } |
| |
| #define MAX_INPUT_SEL_FORMATS 1 |
| |
| static u32 * |
| dlpc_atomic_get_input_bus_fmts(struct drm_bridge *bridge, |
| struct drm_bridge_state *bridge_state, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state, |
| u32 output_fmt, |
| unsigned int *num_input_fmts) |
| { |
| u32 *input_fmts; |
| |
| *num_input_fmts = 0; |
| |
| input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), |
| GFP_KERNEL); |
| if (!input_fmts) |
| return NULL; |
| |
| /* This is the DSI-end bus format */ |
| input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; |
| *num_input_fmts = 1; |
| |
| return input_fmts; |
| } |
| |
| static void dlpc_mode_set(struct drm_bridge *bridge, |
| const struct drm_display_mode *mode, |
| const struct drm_display_mode *adjusted_mode) |
| { |
| struct dlpc *dlpc = bridge_to_dlpc(bridge); |
| |
| drm_mode_copy(&dlpc->mode, adjusted_mode); |
| } |
| |
| static int dlpc_attach(struct drm_bridge *bridge, |
| enum drm_bridge_attach_flags flags) |
| { |
| struct dlpc *dlpc = bridge_to_dlpc(bridge); |
| |
| return drm_bridge_attach(bridge->encoder, dlpc->next_bridge, bridge, flags); |
| } |
| |
| static const struct drm_bridge_funcs dlpc_bridge_funcs = { |
| .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, |
| .atomic_get_input_bus_fmts = dlpc_atomic_get_input_bus_fmts, |
| .atomic_reset = drm_atomic_helper_bridge_reset, |
| .atomic_pre_enable = dlpc_atomic_pre_enable, |
| .atomic_enable = dlpc_atomic_enable, |
| .atomic_post_disable = dlpc_atomic_post_disable, |
| .mode_set = dlpc_mode_set, |
| .attach = dlpc_attach, |
| }; |
| |
| static int dlpc3433_parse_dt(struct dlpc *dlpc) |
| { |
| struct device *dev = dlpc->dev; |
| struct device_node *endpoint; |
| int ret; |
| |
| dlpc->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(dlpc->enable_gpio)) |
| return PTR_ERR(dlpc->enable_gpio); |
| |
| dlpc->vcc_intf = devm_regulator_get(dlpc->dev, "vcc_intf"); |
| if (IS_ERR(dlpc->vcc_intf)) |
| return dev_err_probe(dev, PTR_ERR(dlpc->vcc_intf), |
| "failed to get VCC_INTF supply\n"); |
| |
| dlpc->vcc_flsh = devm_regulator_get(dlpc->dev, "vcc_flsh"); |
| if (IS_ERR(dlpc->vcc_flsh)) |
| return dev_err_probe(dev, PTR_ERR(dlpc->vcc_flsh), |
| "failed to get VCC_FLSH supply\n"); |
| |
| dlpc->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); |
| if (IS_ERR(dlpc->next_bridge)) |
| return PTR_ERR(dlpc->next_bridge); |
| |
| endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); |
| dlpc->dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes"); |
| if (dlpc->dsi_lanes < 0 || dlpc->dsi_lanes > 4) { |
| ret = -EINVAL; |
| goto err_put_endpoint; |
| } |
| |
| dlpc->host_node = of_graph_get_remote_port_parent(endpoint); |
| if (!dlpc->host_node) { |
| ret = -ENODEV; |
| goto err_put_host; |
| } |
| |
| of_node_put(endpoint); |
| |
| return 0; |
| |
| err_put_host: |
| of_node_put(dlpc->host_node); |
| err_put_endpoint: |
| of_node_put(endpoint); |
| return ret; |
| } |
| |
| static int dlpc_host_attach(struct dlpc *dlpc) |
| { |
| struct device *dev = dlpc->dev; |
| struct mipi_dsi_host *host; |
| struct mipi_dsi_device_info info = { |
| .type = "dlpc3433", |
| .channel = 0, |
| .node = NULL, |
| }; |
| int ret; |
| |
| host = of_find_mipi_dsi_host_by_node(dlpc->host_node); |
| if (!host) |
| return dev_err_probe(dev, -EPROBE_DEFER, "failed to find dsi host\n"); |
| |
| dlpc->dsi = mipi_dsi_device_register_full(host, &info); |
| if (IS_ERR(dlpc->dsi)) { |
| DRM_DEV_ERROR(dev, "failed to create dsi device\n"); |
| return PTR_ERR(dlpc->dsi); |
| } |
| |
| dlpc->dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST; |
| dlpc->dsi->format = MIPI_DSI_FMT_RGB565; |
| dlpc->dsi->lanes = dlpc->dsi_lanes; |
| |
| ret = devm_mipi_dsi_attach(dev, dlpc->dsi); |
| if (ret) |
| DRM_DEV_ERROR(dev, "failed to attach dsi host\n"); |
| |
| return ret; |
| } |
| |
| static int dlpc3433_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct dlpc *dlpc; |
| int ret; |
| |
| dlpc = devm_kzalloc(dev, sizeof(*dlpc), GFP_KERNEL); |
| if (!dlpc) |
| return -ENOMEM; |
| |
| dlpc->dev = dev; |
| |
| dlpc->regmap = devm_regmap_init_i2c(client, &dlpc_regmap_config); |
| if (IS_ERR(dlpc->regmap)) |
| return PTR_ERR(dlpc->regmap); |
| |
| ret = dlpc3433_parse_dt(dlpc); |
| if (ret) |
| return ret; |
| |
| dev_set_drvdata(dev, dlpc); |
| i2c_set_clientdata(client, dlpc); |
| |
| dlpc->bridge.funcs = &dlpc_bridge_funcs; |
| dlpc->bridge.of_node = dev->of_node; |
| drm_bridge_add(&dlpc->bridge); |
| |
| ret = dlpc_host_attach(dlpc); |
| if (ret) |
| goto err_remove_bridge; |
| |
| return 0; |
| |
| err_remove_bridge: |
| drm_bridge_remove(&dlpc->bridge); |
| return ret; |
| } |
| |
| static void dlpc3433_remove(struct i2c_client *client) |
| { |
| struct dlpc *dlpc = i2c_get_clientdata(client); |
| |
| drm_bridge_remove(&dlpc->bridge); |
| of_node_put(dlpc->host_node); |
| } |
| |
| static const struct i2c_device_id dlpc3433_id[] = { |
| { "ti,dlpc3433", 0 }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(i2c, dlpc3433_id); |
| |
| static const struct of_device_id dlpc3433_match_table[] = { |
| { .compatible = "ti,dlpc3433" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, dlpc3433_match_table); |
| |
| static struct i2c_driver dlpc3433_driver = { |
| .probe = dlpc3433_probe, |
| .remove = dlpc3433_remove, |
| .id_table = dlpc3433_id, |
| .driver = { |
| .name = "ti-dlpc3433", |
| .of_match_table = dlpc3433_match_table, |
| }, |
| }; |
| module_i2c_driver(dlpc3433_driver); |
| |
| MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); |
| MODULE_AUTHOR("Christopher Vollo <chris@renewoutreach.org>"); |
| MODULE_DESCRIPTION("TI DLPC3433 MIPI DSI Display Controller Bridge"); |
| MODULE_LICENSE("GPL"); |