| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for HiSilicon PCIe tune and trace device |
| * |
| * Copyright (c) 2022 HiSilicon Technologies Co., Ltd. |
| * Author: Yicong Yang <yangyicong@hisilicon.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/cpuhotplug.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/iommu.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/sysfs.h> |
| #include <linux/vmalloc.h> |
| |
| #include "hisi_ptt.h" |
| |
| /* Dynamic CPU hotplug state used by PTT */ |
| static enum cpuhp_state hisi_ptt_pmu_online; |
| |
| static bool hisi_ptt_wait_tuning_finish(struct hisi_ptt *hisi_ptt) |
| { |
| u32 val; |
| |
| return !readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TUNING_INT_STAT, |
| val, !(val & HISI_PTT_TUNING_INT_STAT_MASK), |
| HISI_PTT_WAIT_POLL_INTERVAL_US, |
| HISI_PTT_WAIT_TUNE_TIMEOUT_US); |
| } |
| |
| static ssize_t hisi_ptt_tune_attr_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); |
| struct dev_ext_attribute *ext_attr; |
| struct hisi_ptt_tune_desc *desc; |
| u32 reg; |
| u16 val; |
| |
| ext_attr = container_of(attr, struct dev_ext_attribute, attr); |
| desc = ext_attr->var; |
| |
| mutex_lock(&hisi_ptt->tune_lock); |
| |
| reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); |
| reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB); |
| reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB, |
| desc->event_code); |
| writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); |
| |
| /* Write all 1 to indicates it's the read process */ |
| writel(~0U, hisi_ptt->iobase + HISI_PTT_TUNING_DATA); |
| |
| if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) { |
| mutex_unlock(&hisi_ptt->tune_lock); |
| return -ETIMEDOUT; |
| } |
| |
| reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_DATA); |
| reg &= HISI_PTT_TUNING_DATA_VAL_MASK; |
| val = FIELD_GET(HISI_PTT_TUNING_DATA_VAL_MASK, reg); |
| |
| mutex_unlock(&hisi_ptt->tune_lock); |
| return sysfs_emit(buf, "%u\n", val); |
| } |
| |
| static ssize_t hisi_ptt_tune_attr_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); |
| struct dev_ext_attribute *ext_attr; |
| struct hisi_ptt_tune_desc *desc; |
| u32 reg; |
| u16 val; |
| |
| ext_attr = container_of(attr, struct dev_ext_attribute, attr); |
| desc = ext_attr->var; |
| |
| if (kstrtou16(buf, 10, &val)) |
| return -EINVAL; |
| |
| mutex_lock(&hisi_ptt->tune_lock); |
| |
| reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); |
| reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB); |
| reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB, |
| desc->event_code); |
| writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); |
| writel(FIELD_PREP(HISI_PTT_TUNING_DATA_VAL_MASK, val), |
| hisi_ptt->iobase + HISI_PTT_TUNING_DATA); |
| |
| if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) { |
| mutex_unlock(&hisi_ptt->tune_lock); |
| return -ETIMEDOUT; |
| } |
| |
| mutex_unlock(&hisi_ptt->tune_lock); |
| return count; |
| } |
| |
| #define HISI_PTT_TUNE_ATTR(_name, _val, _show, _store) \ |
| static struct hisi_ptt_tune_desc _name##_desc = { \ |
| .name = #_name, \ |
| .event_code = (_val), \ |
| }; \ |
| static struct dev_ext_attribute hisi_ptt_##_name##_attr = { \ |
| .attr = __ATTR(_name, 0600, _show, _store), \ |
| .var = &_name##_desc, \ |
| } |
| |
| #define HISI_PTT_TUNE_ATTR_COMMON(_name, _val) \ |
| HISI_PTT_TUNE_ATTR(_name, _val, \ |
| hisi_ptt_tune_attr_show, \ |
| hisi_ptt_tune_attr_store) |
| |
| /* |
| * The value of the tuning event are composed of two parts: main event code |
| * in BIT[0,15] and subevent code in BIT[16,23]. For example, qox_tx_cpl is |
| * a subevent of 'Tx path QoS control' which for tuning the weight of Tx |
| * completion TLPs. See hisi_ptt.rst documentation for more information. |
| */ |
| #define HISI_PTT_TUNE_QOS_TX_CPL (0x4 | (3 << 16)) |
| #define HISI_PTT_TUNE_QOS_TX_NP (0x4 | (4 << 16)) |
| #define HISI_PTT_TUNE_QOS_TX_P (0x4 | (5 << 16)) |
| #define HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL (0x5 | (6 << 16)) |
| #define HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL (0x5 | (7 << 16)) |
| |
| HISI_PTT_TUNE_ATTR_COMMON(qos_tx_cpl, HISI_PTT_TUNE_QOS_TX_CPL); |
| HISI_PTT_TUNE_ATTR_COMMON(qos_tx_np, HISI_PTT_TUNE_QOS_TX_NP); |
| HISI_PTT_TUNE_ATTR_COMMON(qos_tx_p, HISI_PTT_TUNE_QOS_TX_P); |
| HISI_PTT_TUNE_ATTR_COMMON(rx_alloc_buf_level, HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL); |
| HISI_PTT_TUNE_ATTR_COMMON(tx_alloc_buf_level, HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL); |
| |
| static struct attribute *hisi_ptt_tune_attrs[] = { |
| &hisi_ptt_qos_tx_cpl_attr.attr.attr, |
| &hisi_ptt_qos_tx_np_attr.attr.attr, |
| &hisi_ptt_qos_tx_p_attr.attr.attr, |
| &hisi_ptt_rx_alloc_buf_level_attr.attr.attr, |
| &hisi_ptt_tx_alloc_buf_level_attr.attr.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group hisi_ptt_tune_group = { |
| .name = "tune", |
| .attrs = hisi_ptt_tune_attrs, |
| }; |
| |
| static u16 hisi_ptt_get_filter_val(u16 devid, bool is_port) |
| { |
| if (is_port) |
| return BIT(HISI_PCIE_CORE_PORT_ID(devid & 0xff)); |
| |
| return devid; |
| } |
| |
| static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt) |
| { |
| u32 val; |
| |
| return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_STS, |
| val, val & HISI_PTT_TRACE_IDLE, |
| HISI_PTT_WAIT_POLL_INTERVAL_US, |
| HISI_PTT_WAIT_TRACE_TIMEOUT_US); |
| } |
| |
| static void hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt) |
| { |
| u32 val; |
| |
| readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS, |
| val, !val, HISI_PTT_RESET_POLL_INTERVAL_US, |
| HISI_PTT_RESET_TIMEOUT_US); |
| } |
| |
| static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt) |
| { |
| writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| |
| /* Mask the interrupt on the end */ |
| writel(HISI_PTT_TRACE_INT_MASK_ALL, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK); |
| |
| hisi_ptt->trace_ctrl.started = false; |
| } |
| |
| static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt) |
| { |
| struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; |
| u32 val; |
| int i; |
| |
| /* Check device idle before start trace */ |
| if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) { |
| pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy\n"); |
| return -EBUSY; |
| } |
| |
| ctrl->started = true; |
| |
| /* Reset the DMA before start tracing */ |
| val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| val |= HISI_PTT_TRACE_CTRL_RST; |
| writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| |
| hisi_ptt_wait_dma_reset_done(hisi_ptt); |
| |
| val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| val &= ~HISI_PTT_TRACE_CTRL_RST; |
| writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| |
| /* Reset the index of current buffer */ |
| hisi_ptt->trace_ctrl.buf_index = 0; |
| |
| /* Zero the trace buffers */ |
| for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) |
| memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE); |
| |
| /* Clear the interrupt status */ |
| writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); |
| writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK); |
| |
| /* Set the trace control register */ |
| val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type); |
| val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction); |
| val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format); |
| val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter); |
| if (!hisi_ptt->trace_ctrl.is_port) |
| val |= HISI_PTT_TRACE_CTRL_FILTER_MODE; |
| |
| /* Start the Trace */ |
| val |= HISI_PTT_TRACE_CTRL_EN; |
| writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); |
| |
| return 0; |
| } |
| |
| static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop) |
| { |
| struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; |
| struct perf_output_handle *handle = &ctrl->handle; |
| struct perf_event *event = handle->event; |
| struct hisi_ptt_pmu_buf *buf; |
| size_t size; |
| void *addr; |
| |
| buf = perf_get_aux(handle); |
| if (!buf || !handle->size) |
| return -EINVAL; |
| |
| addr = ctrl->trace_buf[ctrl->buf_index].addr; |
| |
| /* |
| * If we're going to stop, read the size of already traced data from |
| * HISI_PTT_TRACE_WR_STS. Otherwise we're coming from the interrupt, |
| * the data size is always HISI_PTT_TRACE_BUF_SIZE. |
| */ |
| if (stop) { |
| u32 reg; |
| |
| reg = readl(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS); |
| size = FIELD_GET(HISI_PTT_TRACE_WR_STS_WRITE, reg); |
| } else { |
| size = HISI_PTT_TRACE_BUF_SIZE; |
| } |
| |
| memcpy(buf->base + buf->pos, addr, size); |
| buf->pos += size; |
| |
| /* |
| * Always commit the data to the AUX buffer in time to make sure |
| * userspace got enough time to consume the data. |
| * |
| * If we're not going to stop, apply a new one and check whether |
| * there's enough room for the next trace. |
| */ |
| perf_aux_output_end(handle, size); |
| if (!stop) { |
| buf = perf_aux_output_begin(handle, event); |
| if (!buf) |
| return -EINVAL; |
| |
| buf->pos = handle->head % buf->length; |
| if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) { |
| perf_aux_output_end(handle, 0); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t hisi_ptt_isr(int irq, void *context) |
| { |
| struct hisi_ptt *hisi_ptt = context; |
| u32 status, buf_idx; |
| |
| status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); |
| if (!(status & HISI_PTT_TRACE_INT_STAT_MASK)) |
| return IRQ_NONE; |
| |
| buf_idx = ffs(status) - 1; |
| |
| /* Clear the interrupt status of buffer @buf_idx */ |
| writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); |
| |
| /* |
| * Update the AUX buffer and cache the current buffer index, |
| * as we need to know this and save the data when the trace |
| * is ended out of the interrupt handler. End the trace |
| * if the updating fails. |
| */ |
| if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false)) |
| hisi_ptt_trace_end(hisi_ptt); |
| else |
| hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUF_CNT; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void hisi_ptt_irq_free_vectors(void *pdev) |
| { |
| pci_free_irq_vectors(pdev); |
| } |
| |
| static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt) |
| { |
| struct pci_dev *pdev = hisi_ptt->pdev; |
| int ret; |
| |
| ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); |
| if (ret < 0) { |
| pci_err(pdev, "failed to allocate irq vector, ret = %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev); |
| if (ret < 0) |
| return ret; |
| |
| hisi_ptt->trace_irq = pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ); |
| ret = devm_request_irq(&pdev->dev, hisi_ptt->trace_irq, hisi_ptt_isr, |
| IRQF_NOBALANCING | IRQF_NO_THREAD, DRV_NAME, |
| hisi_ptt); |
| if (ret) { |
| pci_err(pdev, "failed to request irq %d, ret = %d\n", |
| hisi_ptt->trace_irq, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void hisi_ptt_del_free_filter(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| if (filter->is_port) |
| hisi_ptt->port_mask &= ~hisi_ptt_get_filter_val(filter->devid, true); |
| |
| list_del(&filter->list); |
| kfree(filter->name); |
| kfree(filter); |
| } |
| |
| static struct hisi_ptt_filter_desc * |
| hisi_ptt_alloc_add_filter(struct hisi_ptt *hisi_ptt, u16 devid, bool is_port) |
| { |
| struct hisi_ptt_filter_desc *filter; |
| u8 devfn = devid & 0xff; |
| char *filter_name; |
| |
| filter_name = kasprintf(GFP_KERNEL, "%04x:%02x:%02x.%d", pci_domain_nr(hisi_ptt->pdev->bus), |
| PCI_BUS_NUM(devid), PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| if (!filter_name) { |
| pci_err(hisi_ptt->pdev, "failed to allocate name for filter %04x:%02x:%02x.%d\n", |
| pci_domain_nr(hisi_ptt->pdev->bus), PCI_BUS_NUM(devid), |
| PCI_SLOT(devfn), PCI_FUNC(devfn)); |
| return NULL; |
| } |
| |
| filter = kzalloc(sizeof(*filter), GFP_KERNEL); |
| if (!filter) { |
| pci_err(hisi_ptt->pdev, "failed to add filter for %s\n", |
| filter_name); |
| kfree(filter_name); |
| return NULL; |
| } |
| |
| filter->name = filter_name; |
| filter->is_port = is_port; |
| filter->devid = devid; |
| |
| if (filter->is_port) { |
| list_add_tail(&filter->list, &hisi_ptt->port_filters); |
| |
| /* Update the available port mask */ |
| hisi_ptt->port_mask |= hisi_ptt_get_filter_val(filter->devid, true); |
| } else { |
| list_add_tail(&filter->list, &hisi_ptt->req_filters); |
| } |
| |
| return filter; |
| } |
| |
| static ssize_t hisi_ptt_filter_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct hisi_ptt_filter_desc *filter; |
| unsigned long filter_val; |
| |
| filter = container_of(attr, struct hisi_ptt_filter_desc, attr); |
| filter_val = hisi_ptt_get_filter_val(filter->devid, filter->is_port) | |
| (filter->is_port ? HISI_PTT_PMU_FILTER_IS_PORT : 0); |
| |
| return sysfs_emit(buf, "0x%05lx\n", filter_val); |
| } |
| |
| static int hisi_ptt_create_rp_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| struct kobject *kobj = &hisi_ptt->hisi_ptt_pmu.dev->kobj; |
| |
| sysfs_attr_init(&filter->attr.attr); |
| filter->attr.attr.name = filter->name; |
| filter->attr.attr.mode = 0400; /* DEVICE_ATTR_ADMIN_RO */ |
| filter->attr.show = hisi_ptt_filter_show; |
| |
| return sysfs_add_file_to_group(kobj, &filter->attr.attr, |
| HISI_PTT_RP_FILTERS_GRP_NAME); |
| } |
| |
| static void hisi_ptt_remove_rp_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| struct kobject *kobj = &hisi_ptt->hisi_ptt_pmu.dev->kobj; |
| |
| sysfs_remove_file_from_group(kobj, &filter->attr.attr, |
| HISI_PTT_RP_FILTERS_GRP_NAME); |
| } |
| |
| static int hisi_ptt_create_req_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| struct kobject *kobj = &hisi_ptt->hisi_ptt_pmu.dev->kobj; |
| |
| sysfs_attr_init(&filter->attr.attr); |
| filter->attr.attr.name = filter->name; |
| filter->attr.attr.mode = 0400; /* DEVICE_ATTR_ADMIN_RO */ |
| filter->attr.show = hisi_ptt_filter_show; |
| |
| return sysfs_add_file_to_group(kobj, &filter->attr.attr, |
| HISI_PTT_REQ_FILTERS_GRP_NAME); |
| } |
| |
| static void hisi_ptt_remove_req_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| struct kobject *kobj = &hisi_ptt->hisi_ptt_pmu.dev->kobj; |
| |
| sysfs_remove_file_from_group(kobj, &filter->attr.attr, |
| HISI_PTT_REQ_FILTERS_GRP_NAME); |
| } |
| |
| static int hisi_ptt_create_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| int ret; |
| |
| if (filter->is_port) |
| ret = hisi_ptt_create_rp_filter_attr(hisi_ptt, filter); |
| else |
| ret = hisi_ptt_create_req_filter_attr(hisi_ptt, filter); |
| |
| if (ret) |
| pci_err(hisi_ptt->pdev, "failed to create sysfs attribute for filter %s\n", |
| filter->name); |
| |
| return ret; |
| } |
| |
| static void hisi_ptt_remove_filter_attr(struct hisi_ptt *hisi_ptt, |
| struct hisi_ptt_filter_desc *filter) |
| { |
| if (filter->is_port) |
| hisi_ptt_remove_rp_filter_attr(hisi_ptt, filter); |
| else |
| hisi_ptt_remove_req_filter_attr(hisi_ptt, filter); |
| } |
| |
| static void hisi_ptt_remove_all_filter_attributes(void *data) |
| { |
| struct hisi_ptt_filter_desc *filter; |
| struct hisi_ptt *hisi_ptt = data; |
| |
| mutex_lock(&hisi_ptt->filter_lock); |
| |
| list_for_each_entry(filter, &hisi_ptt->req_filters, list) |
| hisi_ptt_remove_filter_attr(hisi_ptt, filter); |
| |
| list_for_each_entry(filter, &hisi_ptt->port_filters, list) |
| hisi_ptt_remove_filter_attr(hisi_ptt, filter); |
| |
| hisi_ptt->sysfs_inited = false; |
| mutex_unlock(&hisi_ptt->filter_lock); |
| } |
| |
| static int hisi_ptt_init_filter_attributes(struct hisi_ptt *hisi_ptt) |
| { |
| struct hisi_ptt_filter_desc *filter; |
| int ret; |
| |
| mutex_lock(&hisi_ptt->filter_lock); |
| |
| /* |
| * Register the reset callback in the first stage. In reset we traverse |
| * the filters list to remove the sysfs attributes so the callback can |
| * be called safely even without below filter attributes creation. |
| */ |
| ret = devm_add_action(&hisi_ptt->pdev->dev, |
| hisi_ptt_remove_all_filter_attributes, |
| hisi_ptt); |
| if (ret) |
| goto out; |
| |
| list_for_each_entry(filter, &hisi_ptt->port_filters, list) { |
| ret = hisi_ptt_create_filter_attr(hisi_ptt, filter); |
| if (ret) |
| goto out; |
| } |
| |
| list_for_each_entry(filter, &hisi_ptt->req_filters, list) { |
| ret = hisi_ptt_create_filter_attr(hisi_ptt, filter); |
| if (ret) |
| goto out; |
| } |
| |
| hisi_ptt->sysfs_inited = true; |
| out: |
| mutex_unlock(&hisi_ptt->filter_lock); |
| return ret; |
| } |
| |
| static void hisi_ptt_update_filters(struct work_struct *work) |
| { |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct hisi_ptt_filter_update_info info; |
| struct hisi_ptt_filter_desc *filter; |
| struct hisi_ptt *hisi_ptt; |
| |
| hisi_ptt = container_of(delayed_work, struct hisi_ptt, work); |
| |
| if (!mutex_trylock(&hisi_ptt->filter_lock)) { |
| schedule_delayed_work(&hisi_ptt->work, HISI_PTT_WORK_DELAY_MS); |
| return; |
| } |
| |
| while (kfifo_get(&hisi_ptt->filter_update_kfifo, &info)) { |
| if (info.is_add) { |
| /* |
| * Notify the users if failed to add this filter, others |
| * still work and available. See the comments in |
| * hisi_ptt_init_filters(). |
| */ |
| filter = hisi_ptt_alloc_add_filter(hisi_ptt, info.devid, info.is_port); |
| if (!filter) |
| continue; |
| |
| /* |
| * If filters' sysfs entries hasn't been initialized, |
| * then we're still at probe stage. Add the filters to |
| * the list and later hisi_ptt_init_filter_attributes() |
| * will create sysfs attributes for all the filters. |
| */ |
| if (hisi_ptt->sysfs_inited && |
| hisi_ptt_create_filter_attr(hisi_ptt, filter)) { |
| hisi_ptt_del_free_filter(hisi_ptt, filter); |
| continue; |
| } |
| } else { |
| struct hisi_ptt_filter_desc *tmp; |
| struct list_head *target_list; |
| |
| target_list = info.is_port ? &hisi_ptt->port_filters : |
| &hisi_ptt->req_filters; |
| |
| list_for_each_entry_safe(filter, tmp, target_list, list) |
| if (filter->devid == info.devid) { |
| if (hisi_ptt->sysfs_inited) |
| hisi_ptt_remove_filter_attr(hisi_ptt, filter); |
| |
| hisi_ptt_del_free_filter(hisi_ptt, filter); |
| break; |
| } |
| } |
| } |
| |
| mutex_unlock(&hisi_ptt->filter_lock); |
| } |
| |
| /* |
| * A PCI bus notifier is used here for dynamically updating the filter |
| * list. |
| */ |
| static int hisi_ptt_notifier_call(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct hisi_ptt *hisi_ptt = container_of(nb, struct hisi_ptt, hisi_ptt_nb); |
| struct hisi_ptt_filter_update_info info; |
| struct pci_dev *pdev, *root_port; |
| struct device *dev = data; |
| u32 port_devid; |
| |
| pdev = to_pci_dev(dev); |
| root_port = pcie_find_root_port(pdev); |
| if (!root_port) |
| return 0; |
| |
| port_devid = pci_dev_id(root_port); |
| if (port_devid < hisi_ptt->lower_bdf || |
| port_devid > hisi_ptt->upper_bdf) |
| return 0; |
| |
| info.is_port = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT; |
| info.devid = pci_dev_id(pdev); |
| |
| switch (action) { |
| case BUS_NOTIFY_ADD_DEVICE: |
| info.is_add = true; |
| break; |
| case BUS_NOTIFY_DEL_DEVICE: |
| info.is_add = false; |
| break; |
| default: |
| return 0; |
| } |
| |
| /* |
| * The FIFO size is 16 which is sufficient for almost all the cases, |
| * since each PCIe core will have most 8 Root Ports (typically only |
| * 1~4 Root Ports). On failure log the failed filter and let user |
| * handle it. |
| */ |
| if (kfifo_in_spinlocked(&hisi_ptt->filter_update_kfifo, &info, 1, |
| &hisi_ptt->filter_update_lock)) |
| schedule_delayed_work(&hisi_ptt->work, 0); |
| else |
| pci_warn(hisi_ptt->pdev, |
| "filter update fifo overflow for target %s\n", |
| pci_name(pdev)); |
| |
| return 0; |
| } |
| |
| static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data) |
| { |
| struct pci_dev *root_port = pcie_find_root_port(pdev); |
| struct hisi_ptt_filter_desc *filter; |
| struct hisi_ptt *hisi_ptt = data; |
| u32 port_devid; |
| |
| if (!root_port) |
| return 0; |
| |
| port_devid = pci_dev_id(root_port); |
| if (port_devid < hisi_ptt->lower_bdf || |
| port_devid > hisi_ptt->upper_bdf) |
| return 0; |
| |
| /* |
| * We won't fail the probe if filter allocation failed here. The filters |
| * should be partial initialized and users would know which filter fails |
| * through the log. Other functions of PTT device are still available. |
| */ |
| filter = hisi_ptt_alloc_add_filter(hisi_ptt, pci_dev_id(pdev), |
| pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT); |
| if (!filter) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static void hisi_ptt_release_filters(void *data) |
| { |
| struct hisi_ptt_filter_desc *filter, *tmp; |
| struct hisi_ptt *hisi_ptt = data; |
| |
| list_for_each_entry_safe(filter, tmp, &hisi_ptt->req_filters, list) |
| hisi_ptt_del_free_filter(hisi_ptt, filter); |
| |
| list_for_each_entry_safe(filter, tmp, &hisi_ptt->port_filters, list) |
| hisi_ptt_del_free_filter(hisi_ptt, filter); |
| } |
| |
| static int hisi_ptt_config_trace_buf(struct hisi_ptt *hisi_ptt) |
| { |
| struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; |
| struct device *dev = &hisi_ptt->pdev->dev; |
| int i; |
| |
| ctrl->trace_buf = devm_kcalloc(dev, HISI_PTT_TRACE_BUF_CNT, |
| sizeof(*ctrl->trace_buf), GFP_KERNEL); |
| if (!ctrl->trace_buf) |
| return -ENOMEM; |
| |
| for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) { |
| ctrl->trace_buf[i].addr = dmam_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE, |
| &ctrl->trace_buf[i].dma, |
| GFP_KERNEL); |
| if (!ctrl->trace_buf[i].addr) |
| return -ENOMEM; |
| } |
| |
| /* Configure the trace DMA buffer */ |
| for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) { |
| writel(lower_32_bits(ctrl->trace_buf[i].dma), |
| hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 + |
| i * HISI_PTT_TRACE_ADDR_STRIDE); |
| writel(upper_32_bits(ctrl->trace_buf[i].dma), |
| hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 + |
| i * HISI_PTT_TRACE_ADDR_STRIDE); |
| } |
| writel(HISI_PTT_TRACE_BUF_SIZE, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE); |
| |
| return 0; |
| } |
| |
| static int hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt) |
| { |
| struct pci_dev *pdev = hisi_ptt->pdev; |
| struct pci_bus *bus; |
| int ret; |
| u32 reg; |
| |
| INIT_DELAYED_WORK(&hisi_ptt->work, hisi_ptt_update_filters); |
| INIT_KFIFO(hisi_ptt->filter_update_kfifo); |
| spin_lock_init(&hisi_ptt->filter_update_lock); |
| |
| INIT_LIST_HEAD(&hisi_ptt->port_filters); |
| INIT_LIST_HEAD(&hisi_ptt->req_filters); |
| mutex_init(&hisi_ptt->filter_lock); |
| |
| ret = hisi_ptt_config_trace_buf(hisi_ptt); |
| if (ret) |
| return ret; |
| |
| /* |
| * The device range register provides the information about the root |
| * ports which the RCiEP can control and trace. The RCiEP and the root |
| * ports which it supports are on the same PCIe core, with same domain |
| * number but maybe different bus number. The device range register |
| * will tell us which root ports we can support, Bit[31:16] indicates |
| * the upper BDF numbers of the root port, while Bit[15:0] indicates |
| * the lower. |
| */ |
| reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE); |
| hisi_ptt->upper_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg); |
| hisi_ptt->lower_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg); |
| |
| bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper_bdf)); |
| if (bus) |
| pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt); |
| |
| ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_release_filters, hisi_ptt); |
| if (ret) |
| return ret; |
| |
| hisi_ptt->trace_ctrl.on_cpu = -1; |
| return 0; |
| } |
| |
| static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); |
| const cpumask_t *cpumask = cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)); |
| |
| return cpumap_print_to_pagebuf(true, buf, cpumask); |
| } |
| static DEVICE_ATTR_RO(cpumask); |
| |
| static struct attribute *hisi_ptt_cpumask_attrs[] = { |
| &dev_attr_cpumask.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group hisi_ptt_cpumask_attr_group = { |
| .attrs = hisi_ptt_cpumask_attrs, |
| }; |
| |
| /* |
| * Bit 19 indicates the filter type, 1 for Root Port filter and 0 for Requester |
| * filter. Bit[15:0] indicates the filter value, for Root Port filter it's |
| * a bit mask of desired ports and for Requester filter it's the Requester ID |
| * of the desired PCIe function. Bit[18:16] is reserved for extension. |
| * |
| * See hisi_ptt.rst documentation for detailed information. |
| */ |
| PMU_FORMAT_ATTR(filter, "config:0-19"); |
| PMU_FORMAT_ATTR(direction, "config:20-23"); |
| PMU_FORMAT_ATTR(type, "config:24-31"); |
| PMU_FORMAT_ATTR(format, "config:32-35"); |
| |
| static struct attribute *hisi_ptt_pmu_format_attrs[] = { |
| &format_attr_filter.attr, |
| &format_attr_direction.attr, |
| &format_attr_type.attr, |
| &format_attr_format.attr, |
| NULL |
| }; |
| |
| static struct attribute_group hisi_ptt_pmu_format_group = { |
| .name = "format", |
| .attrs = hisi_ptt_pmu_format_attrs, |
| }; |
| |
| static ssize_t hisi_ptt_filter_multiselect_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct dev_ext_attribute *ext_attr; |
| |
| ext_attr = container_of(attr, struct dev_ext_attribute, attr); |
| return sysfs_emit(buf, "%s\n", (char *)ext_attr->var); |
| } |
| |
| static struct dev_ext_attribute root_port_filters_multiselect = { |
| .attr = { |
| .attr = { .name = "multiselect", .mode = 0400 }, |
| .show = hisi_ptt_filter_multiselect_show, |
| }, |
| .var = "1", |
| }; |
| |
| static struct attribute *hisi_ptt_pmu_root_ports_attrs[] = { |
| &root_port_filters_multiselect.attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group hisi_ptt_pmu_root_ports_group = { |
| .name = HISI_PTT_RP_FILTERS_GRP_NAME, |
| .attrs = hisi_ptt_pmu_root_ports_attrs, |
| }; |
| |
| static struct dev_ext_attribute requester_filters_multiselect = { |
| .attr = { |
| .attr = { .name = "multiselect", .mode = 0400 }, |
| .show = hisi_ptt_filter_multiselect_show, |
| }, |
| .var = "0", |
| }; |
| |
| static struct attribute *hisi_ptt_pmu_requesters_attrs[] = { |
| &requester_filters_multiselect.attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group hisi_ptt_pmu_requesters_group = { |
| .name = HISI_PTT_REQ_FILTERS_GRP_NAME, |
| .attrs = hisi_ptt_pmu_requesters_attrs, |
| }; |
| |
| static const struct attribute_group *hisi_ptt_pmu_groups[] = { |
| &hisi_ptt_cpumask_attr_group, |
| &hisi_ptt_pmu_format_group, |
| &hisi_ptt_tune_group, |
| &hisi_ptt_pmu_root_ports_group, |
| &hisi_ptt_pmu_requesters_group, |
| NULL |
| }; |
| |
| static int hisi_ptt_trace_valid_direction(u32 val) |
| { |
| /* |
| * The direction values have different effects according to the data |
| * format (specified in the parentheses). TLP set A/B means different |
| * set of TLP types. See hisi_ptt.rst documentation for more details. |
| */ |
| static const u32 hisi_ptt_trace_available_direction[] = { |
| 0, /* inbound(4DW) or reserved(8DW) */ |
| 1, /* outbound(4DW) */ |
| 2, /* {in, out}bound(4DW) or inbound(8DW), TLP set A */ |
| 3, /* {in, out}bound(4DW) or inbound(8DW), TLP set B */ |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_direction); i++) { |
| if (val == hisi_ptt_trace_available_direction[i]) |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int hisi_ptt_trace_valid_type(u32 val) |
| { |
| /* Different types can be set simultaneously */ |
| static const u32 hisi_ptt_trace_available_type[] = { |
| 1, /* posted_request */ |
| 2, /* non-posted_request */ |
| 4, /* completion */ |
| }; |
| int i; |
| |
| if (!val) |
| return -EINVAL; |
| |
| /* |
| * Walk the available list and clear the valid bits of |
| * the config. If there is any resident bit after the |
| * walk then the config is invalid. |
| */ |
| for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_type); i++) |
| val &= ~hisi_ptt_trace_available_type[i]; |
| |
| if (val) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int hisi_ptt_trace_valid_format(u32 val) |
| { |
| static const u32 hisi_ptt_trace_availble_format[] = { |
| 0, /* 4DW */ |
| 1, /* 8DW */ |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_availble_format); i++) { |
| if (val == hisi_ptt_trace_availble_format[i]) |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int hisi_ptt_trace_valid_filter(struct hisi_ptt *hisi_ptt, u64 config) |
| { |
| unsigned long val, port_mask = hisi_ptt->port_mask; |
| struct hisi_ptt_filter_desc *filter; |
| int ret = 0; |
| |
| hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config); |
| val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config); |
| |
| /* |
| * Port filters are defined as bit mask. For port filters, check |
| * the bits in the @val are within the range of hisi_ptt->port_mask |
| * and whether it's empty or not, otherwise user has specified |
| * some unsupported root ports. |
| * |
| * For Requester ID filters, walk the available filter list to see |
| * whether we have one matched. |
| */ |
| mutex_lock(&hisi_ptt->filter_lock); |
| if (!hisi_ptt->trace_ctrl.is_port) { |
| list_for_each_entry(filter, &hisi_ptt->req_filters, list) { |
| if (val == hisi_ptt_get_filter_val(filter->devid, filter->is_port)) |
| goto out; |
| } |
| } else if (bitmap_subset(&val, &port_mask, BITS_PER_LONG)) { |
| goto out; |
| } |
| |
| ret = -EINVAL; |
| out: |
| mutex_unlock(&hisi_ptt->filter_lock); |
| return ret; |
| } |
| |
| static void hisi_ptt_pmu_init_configs(struct hisi_ptt *hisi_ptt, struct perf_event *event) |
| { |
| struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; |
| u32 val; |
| |
| val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, event->attr.config); |
| hisi_ptt->trace_ctrl.filter = val; |
| |
| val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); |
| ctrl->direction = val; |
| |
| val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); |
| ctrl->type = val; |
| |
| val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); |
| ctrl->format = val; |
| } |
| |
| static int hisi_ptt_pmu_event_init(struct perf_event *event) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); |
| int ret; |
| u32 val; |
| |
| if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) |
| return -ENOENT; |
| |
| if (event->cpu < 0) { |
| dev_dbg(event->pmu->dev, "Per-task mode not supported\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (event->attach_state & PERF_ATTACH_TASK) |
| return -EOPNOTSUPP; |
| |
| ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config); |
| if (ret < 0) |
| return ret; |
| |
| val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); |
| ret = hisi_ptt_trace_valid_direction(val); |
| if (ret < 0) |
| return ret; |
| |
| val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); |
| ret = hisi_ptt_trace_valid_type(val); |
| if (ret < 0) |
| return ret; |
| |
| val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); |
| return hisi_ptt_trace_valid_format(val); |
| } |
| |
| static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages, |
| int nr_pages, bool overwrite) |
| { |
| struct hisi_ptt_pmu_buf *buf; |
| struct page **pagelist; |
| int i; |
| |
| if (overwrite) { |
| dev_warn(event->pmu->dev, "Overwrite mode is not supported\n"); |
| return NULL; |
| } |
| |
| /* If the pages size less than buffers, we cannot start trace */ |
| if (nr_pages < HISI_PTT_TRACE_TOTAL_BUF_SIZE / PAGE_SIZE) |
| return NULL; |
| |
| buf = kzalloc(sizeof(*buf), GFP_KERNEL); |
| if (!buf) |
| return NULL; |
| |
| pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL); |
| if (!pagelist) |
| goto err; |
| |
| for (i = 0; i < nr_pages; i++) |
| pagelist[i] = virt_to_page(pages[i]); |
| |
| buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL); |
| if (!buf->base) { |
| kfree(pagelist); |
| goto err; |
| } |
| |
| buf->nr_pages = nr_pages; |
| buf->length = nr_pages * PAGE_SIZE; |
| buf->pos = 0; |
| |
| kfree(pagelist); |
| return buf; |
| err: |
| kfree(buf); |
| return NULL; |
| } |
| |
| static void hisi_ptt_pmu_free_aux(void *aux) |
| { |
| struct hisi_ptt_pmu_buf *buf = aux; |
| |
| vunmap(buf->base); |
| kfree(buf); |
| } |
| |
| static void hisi_ptt_pmu_start(struct perf_event *event, int flags) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); |
| struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle; |
| struct hw_perf_event *hwc = &event->hw; |
| struct device *dev = event->pmu->dev; |
| struct hisi_ptt_pmu_buf *buf; |
| int cpu = event->cpu; |
| int ret; |
| |
| hwc->state = 0; |
| |
| /* Serialize the perf process if user specified several CPUs */ |
| spin_lock(&hisi_ptt->pmu_lock); |
| if (hisi_ptt->trace_ctrl.started) { |
| dev_dbg(dev, "trace has already started\n"); |
| goto stop; |
| } |
| |
| /* |
| * Handle the interrupt on the same cpu which starts the trace to avoid |
| * context mismatch. Otherwise we'll trigger the WARN from the perf |
| * core in event_function_local(). If CPU passed is offline we'll fail |
| * here, just log it since we can do nothing here. |
| */ |
| ret = irq_set_affinity(hisi_ptt->trace_irq, cpumask_of(cpu)); |
| if (ret) |
| dev_warn(dev, "failed to set the affinity of trace interrupt\n"); |
| |
| hisi_ptt->trace_ctrl.on_cpu = cpu; |
| |
| buf = perf_aux_output_begin(handle, event); |
| if (!buf) { |
| dev_dbg(dev, "aux output begin failed\n"); |
| goto stop; |
| } |
| |
| buf->pos = handle->head % buf->length; |
| |
| hisi_ptt_pmu_init_configs(hisi_ptt, event); |
| |
| ret = hisi_ptt_trace_start(hisi_ptt); |
| if (ret) { |
| dev_dbg(dev, "trace start failed, ret = %d\n", ret); |
| perf_aux_output_end(handle, 0); |
| goto stop; |
| } |
| |
| spin_unlock(&hisi_ptt->pmu_lock); |
| return; |
| stop: |
| event->hw.state |= PERF_HES_STOPPED; |
| spin_unlock(&hisi_ptt->pmu_lock); |
| } |
| |
| static void hisi_ptt_pmu_stop(struct perf_event *event, int flags) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| |
| if (hwc->state & PERF_HES_STOPPED) |
| return; |
| |
| spin_lock(&hisi_ptt->pmu_lock); |
| if (hisi_ptt->trace_ctrl.started) { |
| hisi_ptt_trace_end(hisi_ptt); |
| |
| if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) |
| dev_warn(event->pmu->dev, "Device is still busy\n"); |
| |
| hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true); |
| } |
| spin_unlock(&hisi_ptt->pmu_lock); |
| |
| hwc->state |= PERF_HES_STOPPED; |
| perf_event_update_userpage(event); |
| hwc->state |= PERF_HES_UPTODATE; |
| } |
| |
| static int hisi_ptt_pmu_add(struct perf_event *event, int flags) |
| { |
| struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| int cpu = event->cpu; |
| |
| /* Only allow the cpus on the device's node to add the event */ |
| if (!cpumask_test_cpu(cpu, cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)))) |
| return 0; |
| |
| hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; |
| |
| if (flags & PERF_EF_START) { |
| hisi_ptt_pmu_start(event, PERF_EF_RELOAD); |
| if (hwc->state & PERF_HES_STOPPED) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void hisi_ptt_pmu_del(struct perf_event *event, int flags) |
| { |
| hisi_ptt_pmu_stop(event, PERF_EF_UPDATE); |
| } |
| |
| static void hisi_ptt_pmu_read(struct perf_event *event) |
| { |
| } |
| |
| static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node) |
| { |
| cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node); |
| } |
| |
| static void hisi_ptt_unregister_pmu(void *pmu) |
| { |
| perf_pmu_unregister(pmu); |
| } |
| |
| static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt) |
| { |
| u16 core_id, sicl_id; |
| char *pmu_name; |
| u32 reg; |
| int ret; |
| |
| ret = cpuhp_state_add_instance_nocalls(hisi_ptt_pmu_online, |
| &hisi_ptt->hotplug_node); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&hisi_ptt->pdev->dev, |
| hisi_ptt_remove_cpuhp_instance, |
| &hisi_ptt->hotplug_node); |
| if (ret) |
| return ret; |
| |
| mutex_init(&hisi_ptt->tune_lock); |
| spin_lock_init(&hisi_ptt->pmu_lock); |
| |
| hisi_ptt->hisi_ptt_pmu = (struct pmu) { |
| .module = THIS_MODULE, |
| .parent = &hisi_ptt->pdev->dev, |
| .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_NO_EXCLUDE, |
| .task_ctx_nr = perf_sw_context, |
| .attr_groups = hisi_ptt_pmu_groups, |
| .event_init = hisi_ptt_pmu_event_init, |
| .setup_aux = hisi_ptt_pmu_setup_aux, |
| .free_aux = hisi_ptt_pmu_free_aux, |
| .start = hisi_ptt_pmu_start, |
| .stop = hisi_ptt_pmu_stop, |
| .add = hisi_ptt_pmu_add, |
| .del = hisi_ptt_pmu_del, |
| .read = hisi_ptt_pmu_read, |
| }; |
| |
| reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION); |
| core_id = FIELD_GET(HISI_PTT_CORE_ID, reg); |
| sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg); |
| |
| pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u", |
| sicl_id, core_id); |
| if (!pmu_name) |
| return -ENOMEM; |
| |
| ret = perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(&hisi_ptt->pdev->dev, |
| hisi_ptt_unregister_pmu, |
| &hisi_ptt->hisi_ptt_pmu); |
| } |
| |
| static void hisi_ptt_unregister_filter_update_notifier(void *data) |
| { |
| struct hisi_ptt *hisi_ptt = data; |
| |
| bus_unregister_notifier(&pci_bus_type, &hisi_ptt->hisi_ptt_nb); |
| |
| /* Cancel any work that has been queued */ |
| cancel_delayed_work_sync(&hisi_ptt->work); |
| } |
| |
| /* Register the bus notifier for dynamically updating the filter list */ |
| static int hisi_ptt_register_filter_update_notifier(struct hisi_ptt *hisi_ptt) |
| { |
| int ret; |
| |
| hisi_ptt->hisi_ptt_nb.notifier_call = hisi_ptt_notifier_call; |
| ret = bus_register_notifier(&pci_bus_type, &hisi_ptt->hisi_ptt_nb); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(&hisi_ptt->pdev->dev, |
| hisi_ptt_unregister_filter_update_notifier, |
| hisi_ptt); |
| } |
| |
| /* |
| * The DMA of PTT trace can only use direct mappings due to some |
| * hardware restriction. Check whether there is no IOMMU or the |
| * policy of the IOMMU domain is passthrough, otherwise the trace |
| * cannot work. |
| * |
| * The PTT device is supposed to behind an ARM SMMUv3, which |
| * should have passthrough the device by a quirk. |
| */ |
| static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev) |
| { |
| struct iommu_domain *iommu_domain; |
| |
| iommu_domain = iommu_get_domain_for_dev(&pdev->dev); |
| if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY) |
| return 0; |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static int hisi_ptt_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct hisi_ptt *hisi_ptt; |
| int ret; |
| |
| ret = hisi_ptt_check_iommu_mapping(pdev); |
| if (ret) { |
| pci_err(pdev, "requires direct DMA mappings\n"); |
| return ret; |
| } |
| |
| hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL); |
| if (!hisi_ptt) |
| return -ENOMEM; |
| |
| hisi_ptt->pdev = pdev; |
| pci_set_drvdata(pdev, hisi_ptt); |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) { |
| pci_err(pdev, "failed to enable device, ret = %d\n", ret); |
| return ret; |
| } |
| |
| ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME); |
| if (ret) { |
| pci_err(pdev, "failed to remap io memory, ret = %d\n", ret); |
| return ret; |
| } |
| |
| hisi_ptt->iobase = pcim_iomap_table(pdev)[2]; |
| |
| ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); |
| if (ret) { |
| pci_err(pdev, "failed to set 64 bit dma mask, ret = %d\n", ret); |
| return ret; |
| } |
| |
| pci_set_master(pdev); |
| |
| ret = hisi_ptt_register_irq(hisi_ptt); |
| if (ret) |
| return ret; |
| |
| ret = hisi_ptt_init_ctrls(hisi_ptt); |
| if (ret) { |
| pci_err(pdev, "failed to init controls, ret = %d\n", ret); |
| return ret; |
| } |
| |
| ret = hisi_ptt_register_filter_update_notifier(hisi_ptt); |
| if (ret) |
| pci_warn(pdev, "failed to register filter update notifier, ret = %d", ret); |
| |
| ret = hisi_ptt_register_pmu(hisi_ptt); |
| if (ret) { |
| pci_err(pdev, "failed to register PMU device, ret = %d", ret); |
| return ret; |
| } |
| |
| ret = hisi_ptt_init_filter_attributes(hisi_ptt); |
| if (ret) { |
| pci_err(pdev, "failed to init sysfs filter attributes, ret = %d", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pci_device_id hisi_ptt_id_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl); |
| |
| static struct pci_driver hisi_ptt_driver = { |
| .name = DRV_NAME, |
| .id_table = hisi_ptt_id_tbl, |
| .probe = hisi_ptt_probe, |
| }; |
| |
| static int hisi_ptt_cpu_teardown(unsigned int cpu, struct hlist_node *node) |
| { |
| struct hisi_ptt *hisi_ptt; |
| struct device *dev; |
| int target, src; |
| |
| hisi_ptt = hlist_entry_safe(node, struct hisi_ptt, hotplug_node); |
| src = hisi_ptt->trace_ctrl.on_cpu; |
| dev = hisi_ptt->hisi_ptt_pmu.dev; |
| |
| if (!hisi_ptt->trace_ctrl.started || src != cpu) |
| return 0; |
| |
| target = cpumask_any_but(cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)), cpu); |
| if (target >= nr_cpu_ids) { |
| dev_err(dev, "no available cpu for perf context migration\n"); |
| return 0; |
| } |
| |
| perf_pmu_migrate_context(&hisi_ptt->hisi_ptt_pmu, src, target); |
| |
| /* |
| * Also make sure the interrupt bind to the migrated CPU as well. Warn |
| * the user on failure here. |
| */ |
| if (irq_set_affinity(hisi_ptt->trace_irq, cpumask_of(target))) |
| dev_warn(dev, "failed to set the affinity of trace interrupt\n"); |
| |
| hisi_ptt->trace_ctrl.on_cpu = target; |
| return 0; |
| } |
| |
| static int __init hisi_ptt_init(void) |
| { |
| int ret; |
| |
| ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRV_NAME, NULL, |
| hisi_ptt_cpu_teardown); |
| if (ret < 0) |
| return ret; |
| hisi_ptt_pmu_online = ret; |
| |
| ret = pci_register_driver(&hisi_ptt_driver); |
| if (ret) |
| cpuhp_remove_multi_state(hisi_ptt_pmu_online); |
| |
| return ret; |
| } |
| module_init(hisi_ptt_init); |
| |
| static void __exit hisi_ptt_exit(void) |
| { |
| pci_unregister_driver(&hisi_ptt_driver); |
| cpuhp_remove_multi_state(hisi_ptt_pmu_online); |
| } |
| module_exit(hisi_ptt_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>"); |
| MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device"); |