| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ADIS16480 and similar IMUs driver |
| * |
| * Copyright 2012 Analog Devices Inc. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/bitfield.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/math.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/spi/spi.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/lcm.h> |
| #include <linux/property.h> |
| #include <linux/swab.h> |
| #include <linux/crc32.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/imu/adis.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| #include <linux/debugfs.h> |
| |
| #define ADIS16480_PAGE_SIZE 0x80 |
| |
| #define ADIS16480_REG(page, reg) ((page) * ADIS16480_PAGE_SIZE + (reg)) |
| |
| #define ADIS16480_REG_PAGE_ID 0x00 /* Same address on each page */ |
| #define ADIS16480_REG_SEQ_CNT ADIS16480_REG(0x00, 0x06) |
| #define ADIS16480_REG_SYS_E_FLA ADIS16480_REG(0x00, 0x08) |
| #define ADIS16480_REG_DIAG_STS ADIS16480_REG(0x00, 0x0A) |
| #define ADIS16480_REG_ALM_STS ADIS16480_REG(0x00, 0x0C) |
| #define ADIS16480_REG_TEMP_OUT ADIS16480_REG(0x00, 0x0E) |
| #define ADIS16480_REG_X_GYRO_OUT ADIS16480_REG(0x00, 0x10) |
| #define ADIS16480_REG_Y_GYRO_OUT ADIS16480_REG(0x00, 0x14) |
| #define ADIS16480_REG_Z_GYRO_OUT ADIS16480_REG(0x00, 0x18) |
| #define ADIS16480_REG_X_ACCEL_OUT ADIS16480_REG(0x00, 0x1C) |
| #define ADIS16480_REG_Y_ACCEL_OUT ADIS16480_REG(0x00, 0x20) |
| #define ADIS16480_REG_Z_ACCEL_OUT ADIS16480_REG(0x00, 0x24) |
| #define ADIS16480_REG_X_MAGN_OUT ADIS16480_REG(0x00, 0x28) |
| #define ADIS16480_REG_Y_MAGN_OUT ADIS16480_REG(0x00, 0x2A) |
| #define ADIS16480_REG_Z_MAGN_OUT ADIS16480_REG(0x00, 0x2C) |
| #define ADIS16480_REG_BAROM_OUT ADIS16480_REG(0x00, 0x2E) |
| #define ADIS16480_REG_X_DELTAANG_OUT ADIS16480_REG(0x00, 0x40) |
| #define ADIS16480_REG_Y_DELTAANG_OUT ADIS16480_REG(0x00, 0x44) |
| #define ADIS16480_REG_Z_DELTAANG_OUT ADIS16480_REG(0x00, 0x48) |
| #define ADIS16480_REG_X_DELTAVEL_OUT ADIS16480_REG(0x00, 0x4C) |
| #define ADIS16480_REG_Y_DELTAVEL_OUT ADIS16480_REG(0x00, 0x50) |
| #define ADIS16480_REG_Z_DELTAVEL_OUT ADIS16480_REG(0x00, 0x54) |
| #define ADIS16480_REG_PROD_ID ADIS16480_REG(0x00, 0x7E) |
| |
| #define ADIS16480_REG_X_GYRO_SCALE ADIS16480_REG(0x02, 0x04) |
| #define ADIS16480_REG_Y_GYRO_SCALE ADIS16480_REG(0x02, 0x06) |
| #define ADIS16480_REG_Z_GYRO_SCALE ADIS16480_REG(0x02, 0x08) |
| #define ADIS16480_REG_X_ACCEL_SCALE ADIS16480_REG(0x02, 0x0A) |
| #define ADIS16480_REG_Y_ACCEL_SCALE ADIS16480_REG(0x02, 0x0C) |
| #define ADIS16480_REG_Z_ACCEL_SCALE ADIS16480_REG(0x02, 0x0E) |
| #define ADIS16480_REG_X_GYRO_BIAS ADIS16480_REG(0x02, 0x10) |
| #define ADIS16480_REG_Y_GYRO_BIAS ADIS16480_REG(0x02, 0x14) |
| #define ADIS16480_REG_Z_GYRO_BIAS ADIS16480_REG(0x02, 0x18) |
| #define ADIS16480_REG_X_ACCEL_BIAS ADIS16480_REG(0x02, 0x1C) |
| #define ADIS16480_REG_Y_ACCEL_BIAS ADIS16480_REG(0x02, 0x20) |
| #define ADIS16480_REG_Z_ACCEL_BIAS ADIS16480_REG(0x02, 0x24) |
| #define ADIS16480_REG_X_HARD_IRON ADIS16480_REG(0x02, 0x28) |
| #define ADIS16480_REG_Y_HARD_IRON ADIS16480_REG(0x02, 0x2A) |
| #define ADIS16480_REG_Z_HARD_IRON ADIS16480_REG(0x02, 0x2C) |
| #define ADIS16480_REG_BAROM_BIAS ADIS16480_REG(0x02, 0x40) |
| #define ADIS16480_REG_FLASH_CNT ADIS16480_REG(0x02, 0x7C) |
| |
| #define ADIS16480_REG_GLOB_CMD ADIS16480_REG(0x03, 0x02) |
| #define ADIS16480_REG_FNCTIO_CTRL ADIS16480_REG(0x03, 0x06) |
| #define ADIS16480_REG_GPIO_CTRL ADIS16480_REG(0x03, 0x08) |
| #define ADIS16480_REG_CONFIG ADIS16480_REG(0x03, 0x0A) |
| #define ADIS16480_REG_DEC_RATE ADIS16480_REG(0x03, 0x0C) |
| #define ADIS16480_REG_SLP_CNT ADIS16480_REG(0x03, 0x10) |
| #define ADIS16480_REG_FILTER_BNK0 ADIS16480_REG(0x03, 0x16) |
| #define ADIS16480_REG_FILTER_BNK1 ADIS16480_REG(0x03, 0x18) |
| #define ADIS16480_REG_ALM_CNFG0 ADIS16480_REG(0x03, 0x20) |
| #define ADIS16480_REG_ALM_CNFG1 ADIS16480_REG(0x03, 0x22) |
| #define ADIS16480_REG_ALM_CNFG2 ADIS16480_REG(0x03, 0x24) |
| #define ADIS16480_REG_XG_ALM_MAGN ADIS16480_REG(0x03, 0x28) |
| #define ADIS16480_REG_YG_ALM_MAGN ADIS16480_REG(0x03, 0x2A) |
| #define ADIS16480_REG_ZG_ALM_MAGN ADIS16480_REG(0x03, 0x2C) |
| #define ADIS16480_REG_XA_ALM_MAGN ADIS16480_REG(0x03, 0x2E) |
| #define ADIS16480_REG_YA_ALM_MAGN ADIS16480_REG(0x03, 0x30) |
| #define ADIS16480_REG_ZA_ALM_MAGN ADIS16480_REG(0x03, 0x32) |
| #define ADIS16480_REG_XM_ALM_MAGN ADIS16480_REG(0x03, 0x34) |
| #define ADIS16480_REG_YM_ALM_MAGN ADIS16480_REG(0x03, 0x36) |
| #define ADIS16480_REG_ZM_ALM_MAGN ADIS16480_REG(0x03, 0x38) |
| #define ADIS16480_REG_BR_ALM_MAGN ADIS16480_REG(0x03, 0x3A) |
| #define ADIS16480_REG_FIRM_REV ADIS16480_REG(0x03, 0x78) |
| #define ADIS16480_REG_FIRM_DM ADIS16480_REG(0x03, 0x7A) |
| #define ADIS16480_REG_FIRM_Y ADIS16480_REG(0x03, 0x7C) |
| |
| /* |
| * External clock scaling in PPS mode. |
| * Available only for ADIS1649x devices |
| */ |
| #define ADIS16495_REG_SYNC_SCALE ADIS16480_REG(0x03, 0x10) |
| #define ADIS16495_REG_BURST_CMD ADIS16480_REG(0x00, 0x7C) |
| #define ADIS16495_GYRO_ACCEL_BURST_ID 0xA5A5 |
| #define ADIS16545_DELTA_ANG_VEL_BURST_ID 0xC3C3 |
| /* total number of segments in burst */ |
| #define ADIS16495_BURST_MAX_DATA 20 |
| |
| #define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20) |
| |
| /* Each filter coefficent bank spans two pages */ |
| #define ADIS16480_FIR_COEF(page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \ |
| ADIS16480_REG((page) + 1, (x) - 60 + 8)) |
| #define ADIS16480_FIR_COEF_A(x) ADIS16480_FIR_COEF(0x05, (x)) |
| #define ADIS16480_FIR_COEF_B(x) ADIS16480_FIR_COEF(0x07, (x)) |
| #define ADIS16480_FIR_COEF_C(x) ADIS16480_FIR_COEF(0x09, (x)) |
| #define ADIS16480_FIR_COEF_D(x) ADIS16480_FIR_COEF(0x0B, (x)) |
| |
| /* ADIS16480_REG_FNCTIO_CTRL */ |
| #define ADIS16480_DRDY_SEL_MSK GENMASK(1, 0) |
| #define ADIS16480_DRDY_SEL(x) FIELD_PREP(ADIS16480_DRDY_SEL_MSK, x) |
| #define ADIS16480_DRDY_POL_MSK BIT(2) |
| #define ADIS16480_DRDY_POL(x) FIELD_PREP(ADIS16480_DRDY_POL_MSK, x) |
| #define ADIS16480_DRDY_EN_MSK BIT(3) |
| #define ADIS16480_DRDY_EN(x) FIELD_PREP(ADIS16480_DRDY_EN_MSK, x) |
| #define ADIS16480_SYNC_SEL_MSK GENMASK(5, 4) |
| #define ADIS16480_SYNC_SEL(x) FIELD_PREP(ADIS16480_SYNC_SEL_MSK, x) |
| #define ADIS16480_SYNC_EN_MSK BIT(7) |
| #define ADIS16480_SYNC_EN(x) FIELD_PREP(ADIS16480_SYNC_EN_MSK, x) |
| #define ADIS16480_SYNC_MODE_MSK BIT(8) |
| #define ADIS16480_SYNC_MODE(x) FIELD_PREP(ADIS16480_SYNC_MODE_MSK, x) |
| |
| #define ADIS16545_BURST_DATA_SEL_0_CHN_MASK GENMASK(5, 0) |
| #define ADIS16545_BURST_DATA_SEL_1_CHN_MASK GENMASK(16, 11) |
| #define ADIS16545_BURST_DATA_SEL_MASK BIT(8) |
| |
| struct adis16480_chip_info { |
| unsigned int num_channels; |
| const struct iio_chan_spec *channels; |
| unsigned int gyro_max_val; |
| unsigned int gyro_max_scale; |
| unsigned int accel_max_val; |
| unsigned int accel_max_scale; |
| unsigned int temp_scale; |
| unsigned int deltang_max_val; |
| unsigned int deltvel_max_val; |
| unsigned int int_clk; |
| unsigned int max_dec_rate; |
| const unsigned int *filter_freqs; |
| bool has_pps_clk_mode; |
| bool has_sleep_cnt; |
| bool has_burst_delta_data; |
| const struct adis_data adis_data; |
| }; |
| |
| enum adis16480_int_pin { |
| ADIS16480_PIN_DIO1, |
| ADIS16480_PIN_DIO2, |
| ADIS16480_PIN_DIO3, |
| ADIS16480_PIN_DIO4 |
| }; |
| |
| enum adis16480_clock_mode { |
| ADIS16480_CLK_SYNC, |
| ADIS16480_CLK_PPS, |
| ADIS16480_CLK_INT |
| }; |
| |
| struct adis16480 { |
| const struct adis16480_chip_info *chip_info; |
| |
| struct adis adis; |
| struct clk *ext_clk; |
| enum adis16480_clock_mode clk_mode; |
| unsigned int clk_freq; |
| u16 burst_id; |
| /* Alignment needed for the timestamp */ |
| __be16 data[ADIS16495_BURST_MAX_DATA] __aligned(8); |
| }; |
| |
| static const char * const adis16480_int_pin_names[4] = { |
| [ADIS16480_PIN_DIO1] = "DIO1", |
| [ADIS16480_PIN_DIO2] = "DIO2", |
| [ADIS16480_PIN_DIO3] = "DIO3", |
| [ADIS16480_PIN_DIO4] = "DIO4", |
| }; |
| |
| static bool low_rate_allow; |
| module_param(low_rate_allow, bool, 0444); |
| MODULE_PARM_DESC(low_rate_allow, |
| "Allow IMU rates below the minimum advisable when external clk is used in PPS mode (default: N)"); |
| |
| static ssize_t adis16480_show_firmware_revision(struct file *file, |
| char __user *userbuf, size_t count, loff_t *ppos) |
| { |
| struct adis16480 *adis16480 = file->private_data; |
| char buf[7]; |
| size_t len; |
| u16 rev; |
| int ret; |
| |
| ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_REV, &rev); |
| if (ret) |
| return ret; |
| |
| len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); |
| |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); |
| } |
| |
| static const struct file_operations adis16480_firmware_revision_fops = { |
| .open = simple_open, |
| .read = adis16480_show_firmware_revision, |
| .llseek = default_llseek, |
| .owner = THIS_MODULE, |
| }; |
| |
| static ssize_t adis16480_show_firmware_date(struct file *file, |
| char __user *userbuf, size_t count, loff_t *ppos) |
| { |
| struct adis16480 *adis16480 = file->private_data; |
| u16 md, year; |
| char buf[12]; |
| size_t len; |
| int ret; |
| |
| ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_Y, &year); |
| if (ret) |
| return ret; |
| |
| ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_DM, &md); |
| if (ret) |
| return ret; |
| |
| len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", |
| md >> 8, md & 0xff, year); |
| |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); |
| } |
| |
| static const struct file_operations adis16480_firmware_date_fops = { |
| .open = simple_open, |
| .read = adis16480_show_firmware_date, |
| .llseek = default_llseek, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int adis16480_show_serial_number(void *arg, u64 *val) |
| { |
| struct adis16480 *adis16480 = arg; |
| u16 serial; |
| int ret; |
| |
| ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_SERIAL_NUM, |
| &serial); |
| if (ret) |
| return ret; |
| |
| *val = serial; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16480_serial_number_fops, |
| adis16480_show_serial_number, NULL, "0x%.4llx\n"); |
| |
| static int adis16480_show_product_id(void *arg, u64 *val) |
| { |
| struct adis16480 *adis16480 = arg; |
| u16 prod_id; |
| int ret; |
| |
| ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_PROD_ID, |
| &prod_id); |
| if (ret) |
| return ret; |
| |
| *val = prod_id; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16480_product_id_fops, |
| adis16480_show_product_id, NULL, "%llu\n"); |
| |
| static int adis16480_show_flash_count(void *arg, u64 *val) |
| { |
| struct adis16480 *adis16480 = arg; |
| u32 flash_count; |
| int ret; |
| |
| ret = adis_read_reg_32(&adis16480->adis, ADIS16480_REG_FLASH_CNT, |
| &flash_count); |
| if (ret) |
| return ret; |
| |
| *val = flash_count; |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16480_flash_count_fops, |
| adis16480_show_flash_count, NULL, "%lld\n"); |
| |
| static void adis16480_debugfs_init(struct iio_dev *indio_dev) |
| { |
| struct adis16480 *adis16480 = iio_priv(indio_dev); |
| struct dentry *d = iio_get_debugfs_dentry(indio_dev); |
| |
| if (!IS_ENABLED(CONFIG_DEBUG_FS)) |
| return; |
| |
| debugfs_create_file_unsafe("firmware_revision", 0400, |
| d, adis16480, &adis16480_firmware_revision_fops); |
| debugfs_create_file_unsafe("firmware_date", 0400, |
| d, adis16480, &adis16480_firmware_date_fops); |
| debugfs_create_file_unsafe("serial_number", 0400, |
| d, adis16480, &adis16480_serial_number_fops); |
| debugfs_create_file_unsafe("product_id", 0400, |
| d, adis16480, &adis16480_product_id_fops); |
| debugfs_create_file_unsafe("flash_count", 0400, |
| d, adis16480, &adis16480_flash_count_fops); |
| } |
| |
| static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| unsigned int t, sample_rate = st->clk_freq; |
| int ret; |
| |
| if (val < 0 || val2 < 0) |
| return -EINVAL; |
| |
| t = val * 1000 + val2 / 1000; |
| if (t == 0) |
| return -EINVAL; |
| |
| adis_dev_auto_lock(&st->adis); |
| /* |
| * When using PPS mode, the input clock needs to be scaled so that we have an IMU |
| * sample rate between (optimally) 4000 and 4250. After this, we can use the |
| * decimation filter to lower the sampling rate in order to get what the user wants. |
| * Optimally, the user sample rate is a multiple of both the IMU sample rate and |
| * the input clock. Hence, calculating the sync_scale dynamically gives us better |
| * chances of achieving a perfect/integer value for DEC_RATE. The math here is: |
| * 1. lcm of the input clock and the desired output rate. |
| * 2. get the highest multiple of the previous result lower than the adis max rate. |
| * 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE |
| * and DEC_RATE (to get the user output rate) |
| */ |
| if (st->clk_mode == ADIS16480_CLK_PPS) { |
| unsigned long scaled_rate = lcm(st->clk_freq, t); |
| int sync_scale; |
| |
| /* |
| * If lcm is bigger than the IMU maximum sampling rate there's no perfect |
| * solution. In this case, we get the highest multiple of the input clock |
| * lower than the IMU max sample rate. |
| */ |
| if (scaled_rate > st->chip_info->int_clk) |
| scaled_rate = st->chip_info->int_clk / st->clk_freq * st->clk_freq; |
| else |
| scaled_rate = st->chip_info->int_clk / scaled_rate * scaled_rate; |
| |
| /* |
| * This is not an hard requirement but it's not advised to run the IMU |
| * with a sample rate lower than 4000Hz due to possible undersampling |
| * issues. However, there are users that might really want to take the risk. |
| * Hence, we provide a module parameter for them. If set, we allow sample |
| * rates lower than 4KHz. By default, we won't allow this and we just roundup |
| * the rate to the next multiple of the input clock bigger than 4KHz. This |
| * is done like this as in some cases (when DEC_RATE is 0) might give |
| * us the closest value to the one desired by the user... |
| */ |
| if (scaled_rate < 4000000 && !low_rate_allow) |
| scaled_rate = roundup(4000000, st->clk_freq); |
| |
| sync_scale = scaled_rate / st->clk_freq; |
| ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale); |
| if (ret) |
| return ret; |
| |
| sample_rate = scaled_rate; |
| } |
| |
| t = DIV_ROUND_CLOSEST(sample_rate, t); |
| if (t) |
| t--; |
| |
| if (t > st->chip_info->max_dec_rate) |
| t = st->chip_info->max_dec_rate; |
| |
| return __adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t); |
| } |
| |
| static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| uint16_t t; |
| int ret; |
| unsigned int freq, sample_rate = st->clk_freq; |
| |
| adis_dev_auto_lock(&st->adis); |
| |
| if (st->clk_mode == ADIS16480_CLK_PPS) { |
| u16 sync_scale; |
| |
| ret = __adis_read_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, &sync_scale); |
| if (ret) |
| return ret; |
| |
| sample_rate = st->clk_freq * sync_scale; |
| } |
| |
| ret = __adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t); |
| if (ret) |
| return ret; |
| |
| freq = DIV_ROUND_CLOSEST(sample_rate, (t + 1)); |
| |
| *val = freq / 1000; |
| *val2 = (freq % 1000) * 1000; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| enum { |
| ADIS16480_SCAN_GYRO_X, |
| ADIS16480_SCAN_GYRO_Y, |
| ADIS16480_SCAN_GYRO_Z, |
| ADIS16480_SCAN_ACCEL_X, |
| ADIS16480_SCAN_ACCEL_Y, |
| ADIS16480_SCAN_ACCEL_Z, |
| ADIS16480_SCAN_MAGN_X, |
| ADIS16480_SCAN_MAGN_Y, |
| ADIS16480_SCAN_MAGN_Z, |
| ADIS16480_SCAN_BARO, |
| ADIS16480_SCAN_TEMP, |
| ADIS16480_SCAN_DELTANG_X, |
| ADIS16480_SCAN_DELTANG_Y, |
| ADIS16480_SCAN_DELTANG_Z, |
| ADIS16480_SCAN_DELTVEL_X, |
| ADIS16480_SCAN_DELTVEL_Y, |
| ADIS16480_SCAN_DELTVEL_Z, |
| }; |
| |
| static const unsigned int adis16480_calibbias_regs[] = { |
| [ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_BIAS, |
| [ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_BIAS, |
| [ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_BIAS, |
| [ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_BIAS, |
| [ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_BIAS, |
| [ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_BIAS, |
| [ADIS16480_SCAN_MAGN_X] = ADIS16480_REG_X_HARD_IRON, |
| [ADIS16480_SCAN_MAGN_Y] = ADIS16480_REG_Y_HARD_IRON, |
| [ADIS16480_SCAN_MAGN_Z] = ADIS16480_REG_Z_HARD_IRON, |
| [ADIS16480_SCAN_BARO] = ADIS16480_REG_BAROM_BIAS, |
| }; |
| |
| static const unsigned int adis16480_calibscale_regs[] = { |
| [ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_SCALE, |
| [ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_SCALE, |
| [ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_SCALE, |
| [ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_SCALE, |
| [ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_SCALE, |
| [ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_SCALE, |
| }; |
| |
| static int adis16480_set_calibbias(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int bias) |
| { |
| unsigned int reg = adis16480_calibbias_regs[chan->scan_index]; |
| struct adis16480 *st = iio_priv(indio_dev); |
| |
| switch (chan->type) { |
| case IIO_MAGN: |
| case IIO_PRESSURE: |
| if (bias < -0x8000 || bias >= 0x8000) |
| return -EINVAL; |
| return adis_write_reg_16(&st->adis, reg, bias); |
| case IIO_ANGL_VEL: |
| case IIO_ACCEL: |
| return adis_write_reg_32(&st->adis, reg, bias); |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adis16480_get_calibbias(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *bias) |
| { |
| unsigned int reg = adis16480_calibbias_regs[chan->scan_index]; |
| struct adis16480 *st = iio_priv(indio_dev); |
| uint16_t val16; |
| uint32_t val32; |
| int ret; |
| |
| switch (chan->type) { |
| case IIO_MAGN: |
| case IIO_PRESSURE: |
| ret = adis_read_reg_16(&st->adis, reg, &val16); |
| if (ret == 0) |
| *bias = sign_extend32(val16, 15); |
| break; |
| case IIO_ANGL_VEL: |
| case IIO_ACCEL: |
| ret = adis_read_reg_32(&st->adis, reg, &val32); |
| if (ret == 0) |
| *bias = sign_extend32(val32, 31); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| if (ret) |
| return ret; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int adis16480_set_calibscale(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int scale) |
| { |
| unsigned int reg = adis16480_calibscale_regs[chan->scan_index]; |
| struct adis16480 *st = iio_priv(indio_dev); |
| |
| if (scale < -0x8000 || scale >= 0x8000) |
| return -EINVAL; |
| |
| return adis_write_reg_16(&st->adis, reg, scale); |
| } |
| |
| static int adis16480_get_calibscale(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *scale) |
| { |
| unsigned int reg = adis16480_calibscale_regs[chan->scan_index]; |
| struct adis16480 *st = iio_priv(indio_dev); |
| uint16_t val16; |
| int ret; |
| |
| ret = adis_read_reg_16(&st->adis, reg, &val16); |
| if (ret) |
| return ret; |
| |
| *scale = sign_extend32(val16, 15); |
| return IIO_VAL_INT; |
| } |
| |
| static const unsigned int adis16480_def_filter_freqs[] = { |
| 310, |
| 55, |
| 275, |
| 63, |
| }; |
| |
| static const unsigned int adis16495_def_filter_freqs[] = { |
| 300, |
| 100, |
| 300, |
| 100, |
| }; |
| |
| static const unsigned int ad16480_filter_data[][2] = { |
| [ADIS16480_SCAN_GYRO_X] = { ADIS16480_REG_FILTER_BNK0, 0 }, |
| [ADIS16480_SCAN_GYRO_Y] = { ADIS16480_REG_FILTER_BNK0, 3 }, |
| [ADIS16480_SCAN_GYRO_Z] = { ADIS16480_REG_FILTER_BNK0, 6 }, |
| [ADIS16480_SCAN_ACCEL_X] = { ADIS16480_REG_FILTER_BNK0, 9 }, |
| [ADIS16480_SCAN_ACCEL_Y] = { ADIS16480_REG_FILTER_BNK0, 12 }, |
| [ADIS16480_SCAN_ACCEL_Z] = { ADIS16480_REG_FILTER_BNK1, 0 }, |
| [ADIS16480_SCAN_MAGN_X] = { ADIS16480_REG_FILTER_BNK1, 3 }, |
| [ADIS16480_SCAN_MAGN_Y] = { ADIS16480_REG_FILTER_BNK1, 6 }, |
| [ADIS16480_SCAN_MAGN_Z] = { ADIS16480_REG_FILTER_BNK1, 9 }, |
| }; |
| |
| static int adis16480_get_filter_freq(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *freq) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| unsigned int enable_mask, offset, reg; |
| uint16_t val; |
| int ret; |
| |
| reg = ad16480_filter_data[chan->scan_index][0]; |
| offset = ad16480_filter_data[chan->scan_index][1]; |
| enable_mask = BIT(offset + 2); |
| |
| ret = adis_read_reg_16(&st->adis, reg, &val); |
| if (ret) |
| return ret; |
| |
| if (!(val & enable_mask)) |
| *freq = 0; |
| else |
| *freq = st->chip_info->filter_freqs[(val >> offset) & 0x3]; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int adis16480_set_filter_freq(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, unsigned int freq) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| unsigned int enable_mask, offset, reg; |
| unsigned int diff, best_diff; |
| unsigned int i, best_freq; |
| uint16_t val; |
| int ret; |
| |
| reg = ad16480_filter_data[chan->scan_index][0]; |
| offset = ad16480_filter_data[chan->scan_index][1]; |
| enable_mask = BIT(offset + 2); |
| |
| adis_dev_auto_lock(&st->adis); |
| |
| ret = __adis_read_reg_16(&st->adis, reg, &val); |
| if (ret) |
| return ret; |
| |
| if (freq == 0) { |
| val &= ~enable_mask; |
| } else { |
| best_freq = 0; |
| best_diff = st->chip_info->filter_freqs[0]; |
| for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) { |
| if (st->chip_info->filter_freqs[i] >= freq) { |
| diff = st->chip_info->filter_freqs[i] - freq; |
| if (diff < best_diff) { |
| best_diff = diff; |
| best_freq = i; |
| } |
| } |
| } |
| |
| val &= ~(0x3 << offset); |
| val |= best_freq << offset; |
| val |= enable_mask; |
| } |
| |
| return __adis_write_reg_16(&st->adis, reg, val); |
| } |
| |
| static int adis16480_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *val, int *val2, long info) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| unsigned int temp; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| return adis_single_conversion(indio_dev, chan, 0, val); |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_ANGL_VEL: |
| *val = st->chip_info->gyro_max_scale; |
| *val2 = st->chip_info->gyro_max_val; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_ACCEL: |
| *val = st->chip_info->accel_max_scale; |
| *val2 = st->chip_info->accel_max_val; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_MAGN: |
| *val = 0; |
| *val2 = 100; /* 0.0001 gauss */ |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_TEMP: |
| /* |
| * +85 degrees Celsius = temp_max_scale |
| * +25 degrees Celsius = 0 |
| * LSB, 25 degrees Celsius = 60 / temp_max_scale |
| */ |
| *val = st->chip_info->temp_scale / 1000; |
| *val2 = (st->chip_info->temp_scale % 1000) * 1000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_PRESSURE: |
| /* |
| * max scale is 1310 mbar |
| * max raw value is 32767 shifted for 32bits |
| */ |
| *val = 131; /* 1310mbar = 131 kPa */ |
| *val2 = 32767 << 16; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_DELTA_ANGL: |
| *val = st->chip_info->deltang_max_val; |
| *val2 = 31; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| case IIO_DELTA_VELOCITY: |
| *val = st->chip_info->deltvel_max_val; |
| *val2 = 31; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_OFFSET: |
| /* Only the temperature channel has a offset */ |
| temp = 25 * 1000000LL; /* 25 degree Celsius = 0x0000 */ |
| *val = DIV_ROUND_CLOSEST_ULL(temp, st->chip_info->temp_scale); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| return adis16480_get_calibbias(indio_dev, chan, val); |
| case IIO_CHAN_INFO_CALIBSCALE: |
| return adis16480_get_calibscale(indio_dev, chan, val); |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: |
| return adis16480_get_filter_freq(indio_dev, chan, val); |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return adis16480_get_freq(indio_dev, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adis16480_write_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int val, int val2, long info) |
| { |
| switch (info) { |
| case IIO_CHAN_INFO_CALIBBIAS: |
| return adis16480_set_calibbias(indio_dev, chan, val); |
| case IIO_CHAN_INFO_CALIBSCALE: |
| return adis16480_set_calibscale(indio_dev, chan, val); |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: |
| return adis16480_set_filter_freq(indio_dev, chan, val); |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return adis16480_set_freq(indio_dev, val, val2); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| #define ADIS16480_MOD_CHANNEL(_type, _mod, _address, _si, _info_sep, _bits) \ |
| { \ |
| .type = (_type), \ |
| .modified = 1, \ |
| .channel2 = (_mod), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | \ |
| _info_sep, \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .address = (_address), \ |
| .scan_index = (_si), \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = (_bits), \ |
| .storagebits = (_bits), \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| #define ADIS16480_GYRO_CHANNEL(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _GYRO_OUT, ADIS16480_SCAN_GYRO_ ## _mod, \ |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ |
| BIT(IIO_CHAN_INFO_CALIBSCALE), \ |
| 32) |
| |
| #define ADIS16480_ACCEL_CHANNEL(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _ACCEL_OUT, ADIS16480_SCAN_ACCEL_ ## _mod, \ |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ |
| BIT(IIO_CHAN_INFO_CALIBSCALE), \ |
| 32) |
| |
| #define ADIS16480_DELTANG_CHANNEL(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _DELTAANG_OUT, ADIS16480_SCAN_DELTANG_ ## _mod, \ |
| 0, 32) |
| |
| #define ADIS16480_DELTANG_CHANNEL_NO_SCAN(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _DELTAANG_OUT, -1, 0, 32) |
| |
| #define ADIS16480_DELTVEL_CHANNEL(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _DELTAVEL_OUT, ADIS16480_SCAN_DELTVEL_ ## _mod, \ |
| 0, 32) |
| |
| #define ADIS16480_DELTVEL_CHANNEL_NO_SCAN(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _DELTAVEL_OUT, -1, 0, 32) |
| |
| #define ADIS16480_MAGN_CHANNEL(_mod) \ |
| ADIS16480_MOD_CHANNEL(IIO_MAGN, IIO_MOD_ ## _mod, \ |
| ADIS16480_REG_ ## _mod ## _MAGN_OUT, ADIS16480_SCAN_MAGN_ ## _mod, \ |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ |
| 16) |
| |
| #define ADIS16480_PRESSURE_CHANNEL() \ |
| { \ |
| .type = IIO_PRESSURE, \ |
| .indexed = 1, \ |
| .channel = 0, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | \ |
| BIT(IIO_CHAN_INFO_SCALE), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .address = ADIS16480_REG_BAROM_OUT, \ |
| .scan_index = ADIS16480_SCAN_BARO, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 32, \ |
| .storagebits = 32, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| #define ADIS16480_TEMP_CHANNEL() { \ |
| .type = IIO_TEMP, \ |
| .indexed = 1, \ |
| .channel = 0, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_OFFSET), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .address = ADIS16480_REG_TEMP_OUT, \ |
| .scan_index = ADIS16480_SCAN_TEMP, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 16, \ |
| .storagebits = 16, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec adis16480_channels[] = { |
| ADIS16480_GYRO_CHANNEL(X), |
| ADIS16480_GYRO_CHANNEL(Y), |
| ADIS16480_GYRO_CHANNEL(Z), |
| ADIS16480_ACCEL_CHANNEL(X), |
| ADIS16480_ACCEL_CHANNEL(Y), |
| ADIS16480_ACCEL_CHANNEL(Z), |
| ADIS16480_MAGN_CHANNEL(X), |
| ADIS16480_MAGN_CHANNEL(Y), |
| ADIS16480_MAGN_CHANNEL(Z), |
| ADIS16480_PRESSURE_CHANNEL(), |
| ADIS16480_TEMP_CHANNEL(), |
| IIO_CHAN_SOFT_TIMESTAMP(11), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(X), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(Y), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(Z), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(X), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Y), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Z), |
| }; |
| |
| static const struct iio_chan_spec adis16485_channels[] = { |
| ADIS16480_GYRO_CHANNEL(X), |
| ADIS16480_GYRO_CHANNEL(Y), |
| ADIS16480_GYRO_CHANNEL(Z), |
| ADIS16480_ACCEL_CHANNEL(X), |
| ADIS16480_ACCEL_CHANNEL(Y), |
| ADIS16480_ACCEL_CHANNEL(Z), |
| ADIS16480_TEMP_CHANNEL(), |
| IIO_CHAN_SOFT_TIMESTAMP(7), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(X), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(Y), |
| ADIS16480_DELTANG_CHANNEL_NO_SCAN(Z), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(X), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Y), |
| ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Z), |
| }; |
| |
| static const struct iio_chan_spec adis16545_channels[] = { |
| ADIS16480_GYRO_CHANNEL(X), |
| ADIS16480_GYRO_CHANNEL(Y), |
| ADIS16480_GYRO_CHANNEL(Z), |
| ADIS16480_ACCEL_CHANNEL(X), |
| ADIS16480_ACCEL_CHANNEL(Y), |
| ADIS16480_ACCEL_CHANNEL(Z), |
| ADIS16480_TEMP_CHANNEL(), |
| ADIS16480_DELTANG_CHANNEL(X), |
| ADIS16480_DELTANG_CHANNEL(Y), |
| ADIS16480_DELTANG_CHANNEL(Z), |
| ADIS16480_DELTVEL_CHANNEL(X), |
| ADIS16480_DELTVEL_CHANNEL(Y), |
| ADIS16480_DELTVEL_CHANNEL(Z), |
| IIO_CHAN_SOFT_TIMESTAMP(17), |
| }; |
| |
| enum adis16480_variant { |
| ADIS16375, |
| ADIS16480, |
| ADIS16485, |
| ADIS16488, |
| ADIS16490, |
| ADIS16495_1, |
| ADIS16495_2, |
| ADIS16495_3, |
| ADIS16497_1, |
| ADIS16497_2, |
| ADIS16497_3, |
| ADIS16545_1, |
| ADIS16545_2, |
| ADIS16545_3, |
| ADIS16547_1, |
| ADIS16547_2, |
| ADIS16547_3 |
| }; |
| |
| #define ADIS16480_DIAG_STAT_XGYRO_FAIL 0 |
| #define ADIS16480_DIAG_STAT_YGYRO_FAIL 1 |
| #define ADIS16480_DIAG_STAT_ZGYRO_FAIL 2 |
| #define ADIS16480_DIAG_STAT_XACCL_FAIL 3 |
| #define ADIS16480_DIAG_STAT_YACCL_FAIL 4 |
| #define ADIS16480_DIAG_STAT_ZACCL_FAIL 5 |
| #define ADIS16480_DIAG_STAT_XMAGN_FAIL 8 |
| #define ADIS16480_DIAG_STAT_YMAGN_FAIL 9 |
| #define ADIS16480_DIAG_STAT_ZMAGN_FAIL 10 |
| #define ADIS16480_DIAG_STAT_BARO_FAIL 11 |
| |
| static const char * const adis16480_status_error_msgs[] = { |
| [ADIS16480_DIAG_STAT_XGYRO_FAIL] = "X-axis gyroscope self-test failure", |
| [ADIS16480_DIAG_STAT_YGYRO_FAIL] = "Y-axis gyroscope self-test failure", |
| [ADIS16480_DIAG_STAT_ZGYRO_FAIL] = "Z-axis gyroscope self-test failure", |
| [ADIS16480_DIAG_STAT_XACCL_FAIL] = "X-axis accelerometer self-test failure", |
| [ADIS16480_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure", |
| [ADIS16480_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure", |
| [ADIS16480_DIAG_STAT_XMAGN_FAIL] = "X-axis magnetometer self-test failure", |
| [ADIS16480_DIAG_STAT_YMAGN_FAIL] = "Y-axis magnetometer self-test failure", |
| [ADIS16480_DIAG_STAT_ZMAGN_FAIL] = "Z-axis magnetometer self-test failure", |
| [ADIS16480_DIAG_STAT_BARO_FAIL] = "Barometer self-test failure", |
| }; |
| |
| static int adis16480_enable_irq(struct adis *adis, bool enable); |
| |
| #define ADIS16480_DATA(_prod_id, _timeouts, _burst_len, _burst_max_speed) \ |
| { \ |
| .diag_stat_reg = ADIS16480_REG_DIAG_STS, \ |
| .glob_cmd_reg = ADIS16480_REG_GLOB_CMD, \ |
| .prod_id_reg = ADIS16480_REG_PROD_ID, \ |
| .prod_id = (_prod_id), \ |
| .has_paging = true, \ |
| .read_delay = 5, \ |
| .write_delay = 5, \ |
| .self_test_mask = BIT(1), \ |
| .self_test_reg = ADIS16480_REG_GLOB_CMD, \ |
| .status_error_msgs = adis16480_status_error_msgs, \ |
| .status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) | \ |
| BIT(ADIS16480_DIAG_STAT_BARO_FAIL), \ |
| .enable_irq = adis16480_enable_irq, \ |
| .timeouts = (_timeouts), \ |
| .burst_reg_cmd = ADIS16495_REG_BURST_CMD, \ |
| .burst_len = (_burst_len), \ |
| .burst_max_speed_hz = _burst_max_speed \ |
| } |
| |
| static const struct adis_timeout adis16485_timeouts = { |
| .reset_ms = 560, |
| .sw_reset_ms = 120, |
| .self_test_ms = 12, |
| }; |
| |
| static const struct adis_timeout adis16480_timeouts = { |
| .reset_ms = 560, |
| .sw_reset_ms = 560, |
| .self_test_ms = 12, |
| }; |
| |
| static const struct adis_timeout adis16495_timeouts = { |
| .reset_ms = 170, |
| .sw_reset_ms = 130, |
| .self_test_ms = 40, |
| }; |
| |
| static const struct adis_timeout adis16495_1_timeouts = { |
| .reset_ms = 250, |
| .sw_reset_ms = 210, |
| .self_test_ms = 20, |
| }; |
| |
| static const struct adis_timeout adis16545_timeouts = { |
| .reset_ms = 315, |
| .sw_reset_ms = 270, |
| .self_test_ms = 35, |
| }; |
| |
| static const struct adis16480_chip_info adis16480_chip_info[] = { |
| [ADIS16375] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| /* |
| * Typically we do IIO_RAD_TO_DEGREE in the denominator, which |
| * is exactly the same as IIO_DEGREE_TO_RAD in numerator, since |
| * it gives better approximation. However, in this case we |
| * cannot do it since it would not fit in a 32bit variable. |
| */ |
| .gyro_max_val = 22887 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(300), |
| .accel_max_val = IIO_M_S_2_TO_G(21973 << 16), |
| .accel_max_scale = 18, |
| .temp_scale = 5650, /* 5.65 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(180), |
| .deltvel_max_val = 100, |
| .int_clk = 2460000, |
| .max_dec_rate = 2048, |
| .has_sleep_cnt = true, |
| .filter_freqs = adis16480_def_filter_freqs, |
| .adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0, 0), |
| }, |
| [ADIS16480] = { |
| .channels = adis16480_channels, |
| .num_channels = ARRAY_SIZE(adis16480_channels), |
| .gyro_max_val = 22500 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(12500 << 16), |
| .accel_max_scale = 10, |
| .temp_scale = 5650, /* 5.65 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 200, |
| .int_clk = 2460000, |
| .max_dec_rate = 2048, |
| .has_sleep_cnt = true, |
| .filter_freqs = adis16480_def_filter_freqs, |
| .adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0, 0), |
| }, |
| [ADIS16485] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 22500 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(20000 << 16), |
| .accel_max_scale = 5, |
| .temp_scale = 5650, /* 5.65 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 50, |
| .int_clk = 2460000, |
| .max_dec_rate = 2048, |
| .has_sleep_cnt = true, |
| .filter_freqs = adis16480_def_filter_freqs, |
| .adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0, 0), |
| }, |
| [ADIS16488] = { |
| .channels = adis16480_channels, |
| .num_channels = ARRAY_SIZE(adis16480_channels), |
| .gyro_max_val = 22500 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(22500 << 16), |
| .accel_max_scale = 18, |
| .temp_scale = 5650, /* 5.65 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 200, |
| .int_clk = 2460000, |
| .max_dec_rate = 2048, |
| .has_sleep_cnt = true, |
| .filter_freqs = adis16480_def_filter_freqs, |
| .adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0, 0), |
| }, |
| [ADIS16490] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(100), |
| .accel_max_val = IIO_M_S_2_TO_G(16000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 14285, /* 14.285 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 200, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .adis_data = ADIS16480_DATA(16490, &adis16495_timeouts, 0, 0), |
| }, |
| [ADIS16495_1] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(125), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16495_2] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 18000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16495_3] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(2000), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16497_1] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(125), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16497_2] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 18000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16497_3] = { |
| .channels = adis16485_channels, |
| .num_channels = ARRAY_SIZE(adis16485_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(2000), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 12500, /* 12.5 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6000000), |
| }, |
| [ADIS16545_1] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(125), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16545, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| [ADIS16545_2] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 18000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16545, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| [ADIS16545_3] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(2000), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 8, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), |
| .deltvel_max_val = 100, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16545, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| [ADIS16547_1] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(125), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16547, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| [ADIS16547_2] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 18000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(450), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16547, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| [ADIS16547_3] = { |
| .channels = adis16545_channels, |
| .num_channels = ARRAY_SIZE(adis16545_channels), |
| .gyro_max_val = 20000 << 16, |
| .gyro_max_scale = IIO_DEGREE_TO_RAD(2000), |
| .accel_max_val = IIO_M_S_2_TO_G(32000 << 16), |
| .accel_max_scale = 40, |
| .temp_scale = 7000, /* 7 milli degree Celsius */ |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), |
| .deltvel_max_val = 400, |
| .int_clk = 4250000, |
| .max_dec_rate = 4250, |
| .filter_freqs = adis16495_def_filter_freqs, |
| .has_pps_clk_mode = true, |
| .has_burst_delta_data = true, |
| /* 20 elements of 16bits */ |
| .adis_data = ADIS16480_DATA(16547, &adis16545_timeouts, |
| ADIS16495_BURST_MAX_DATA * 2, |
| 6500000), |
| }, |
| }; |
| |
| static bool adis16480_validate_crc(const u16 *buf, const u8 n_elem, const u32 crc) |
| { |
| u32 crc_calc; |
| u16 crc_buf[15]; |
| int j; |
| |
| for (j = 0; j < n_elem; j++) |
| crc_buf[j] = swab16(buf[j]); |
| |
| crc_calc = crc32(~0, crc_buf, n_elem * 2); |
| crc_calc ^= ~0; |
| |
| return (crc == crc_calc); |
| } |
| |
| static irqreturn_t adis16480_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct adis16480 *st = iio_priv(indio_dev); |
| struct adis *adis = &st->adis; |
| struct device *dev = &adis->spi->dev; |
| int ret, bit, offset, i = 0, buff_offset = 0; |
| __be16 *buffer; |
| u32 crc; |
| bool valid; |
| |
| adis_dev_auto_scoped_lock(adis) { |
| if (adis->current_page != 0) { |
| adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID); |
| adis->tx[1] = 0; |
| ret = spi_write(adis->spi, adis->tx, 2); |
| if (ret) { |
| dev_err(dev, "Failed to change device page: %d\n", ret); |
| goto irq_done; |
| } |
| |
| adis->current_page = 0; |
| } |
| |
| ret = spi_sync(adis->spi, &adis->msg); |
| if (ret) { |
| dev_err(dev, "Failed to read data: %d\n", ret); |
| goto irq_done; |
| } |
| } |
| |
| /* |
| * After making the burst request, the response can have one or two |
| * 16-bit responses containing the BURST_ID depending on the sclk. If |
| * clk > 3.6MHz, then we will have two BURST_ID in a row. If clk < 3MHZ, |
| * we have only one. To manage that variation, we use the transition from the |
| * BURST_ID to the SYS_E_FLAG register, which will not be equal to 0xA5A5/0xC3C3. |
| * If we not find this variation in the first 4 segments, then the data should |
| * not be valid. |
| */ |
| buffer = adis->buffer; |
| for (offset = 0; offset < 4; offset++) { |
| u16 curr = be16_to_cpu(buffer[offset]); |
| u16 next = be16_to_cpu(buffer[offset + 1]); |
| |
| if (curr == st->burst_id && next != st->burst_id) { |
| offset++; |
| break; |
| } |
| } |
| |
| if (offset == 4) { |
| dev_err(dev, "Invalid burst data\n"); |
| goto irq_done; |
| } |
| |
| crc = be16_to_cpu(buffer[offset + 16]) << 16 | be16_to_cpu(buffer[offset + 15]); |
| valid = adis16480_validate_crc((u16 *)&buffer[offset], 15, crc); |
| if (!valid) { |
| dev_err(dev, "Invalid crc\n"); |
| goto irq_done; |
| } |
| |
| iio_for_each_active_channel(indio_dev, bit) { |
| /* |
| * When burst mode is used, temperature is the first data |
| * channel in the sequence, but the temperature scan index |
| * is 10. |
| */ |
| switch (bit) { |
| case ADIS16480_SCAN_TEMP: |
| st->data[i++] = buffer[offset + 1]; |
| /* |
| * The temperature channel has 16-bit storage size. |
| * We need to perform the padding to have the buffer |
| * elements naturally aligned in case there are any |
| * 32-bit storage size channels enabled which are added |
| * in the buffer after the temprature data. In case |
| * there is no data being added after the temperature |
| * data, the padding is harmless. |
| */ |
| st->data[i++] = 0; |
| break; |
| case ADIS16480_SCAN_DELTANG_X ... ADIS16480_SCAN_DELTVEL_Z: |
| buff_offset = ADIS16480_SCAN_DELTANG_X; |
| fallthrough; |
| case ADIS16480_SCAN_GYRO_X ... ADIS16480_SCAN_ACCEL_Z: |
| /* The lower register data is sequenced first */ |
| st->data[i++] = buffer[2 * (bit - buff_offset) + offset + 3]; |
| st->data[i++] = buffer[2 * (bit - buff_offset) + offset + 2]; |
| break; |
| } |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp); |
| irq_done: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const unsigned long adis16545_channel_masks[] = { |
| ADIS16545_BURST_DATA_SEL_0_CHN_MASK | BIT(ADIS16480_SCAN_TEMP) | BIT(17), |
| ADIS16545_BURST_DATA_SEL_1_CHN_MASK | BIT(ADIS16480_SCAN_TEMP) | BIT(17), |
| 0, |
| }; |
| |
| static int adis16480_update_scan_mode(struct iio_dev *indio_dev, |
| const unsigned long *scan_mask) |
| { |
| u16 en; |
| int ret; |
| struct adis16480 *st = iio_priv(indio_dev); |
| |
| if (st->chip_info->has_burst_delta_data) { |
| if (*scan_mask & ADIS16545_BURST_DATA_SEL_0_CHN_MASK) { |
| en = FIELD_PREP(ADIS16545_BURST_DATA_SEL_MASK, 0); |
| st->burst_id = ADIS16495_GYRO_ACCEL_BURST_ID; |
| } else { |
| en = FIELD_PREP(ADIS16545_BURST_DATA_SEL_MASK, 1); |
| st->burst_id = ADIS16545_DELTA_ANG_VEL_BURST_ID; |
| } |
| |
| ret = __adis_update_bits(&st->adis, ADIS16480_REG_CONFIG, |
| ADIS16545_BURST_DATA_SEL_MASK, en); |
| if (ret) |
| return ret; |
| } |
| |
| return adis_update_scan_mode(indio_dev, scan_mask); |
| } |
| |
| static const struct iio_info adis16480_info = { |
| .read_raw = &adis16480_read_raw, |
| .write_raw = &adis16480_write_raw, |
| .update_scan_mode = &adis16480_update_scan_mode, |
| .debugfs_reg_access = adis_debugfs_reg_access, |
| }; |
| |
| static int adis16480_stop_device(struct iio_dev *indio_dev) |
| { |
| struct adis16480 *st = iio_priv(indio_dev); |
| struct device *dev = &st->adis.spi->dev; |
| int ret; |
| |
| ret = adis_write_reg_16(&st->adis, ADIS16480_REG_SLP_CNT, BIT(9)); |
| if (ret) |
| dev_err(dev, "Could not power down device: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int adis16480_enable_irq(struct adis *adis, bool enable) |
| { |
| uint16_t val; |
| int ret; |
| |
| ret = __adis_read_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, &val); |
| if (ret) |
| return ret; |
| |
| val &= ~ADIS16480_DRDY_EN_MSK; |
| val |= ADIS16480_DRDY_EN(enable); |
| |
| return __adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, val); |
| } |
| |
| static int adis16480_config_irq_pin(struct adis16480 *st) |
| { |
| struct device *dev = &st->adis.spi->dev; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| enum adis16480_int_pin pin; |
| unsigned int irq_type; |
| uint16_t val; |
| int i, irq = 0; |
| |
| /* Disable data ready since the default after reset is on */ |
| val = ADIS16480_DRDY_EN(0); |
| |
| /* |
| * Get the interrupt from the devicetre by reading the interrupt-names |
| * property. If it is not specified, use DIO1 pin as default. |
| * According to the datasheet, the factory default assigns DIO2 as data |
| * ready signal. However, in the previous versions of the driver, DIO1 |
| * pin was used. So, we should leave it as is since some devices might |
| * be expecting the interrupt on the wrong physical pin. |
| */ |
| pin = ADIS16480_PIN_DIO1; |
| for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) { |
| irq = fwnode_irq_get_byname(fwnode, adis16480_int_pin_names[i]); |
| if (irq > 0) { |
| pin = i; |
| break; |
| } |
| } |
| |
| val |= ADIS16480_DRDY_SEL(pin); |
| |
| /* |
| * Get the interrupt line behaviour. The data ready polarity can be |
| * configured as positive or negative, corresponding to |
| * IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING respectively. |
| */ |
| irq_type = irq_get_trigger_type(st->adis.spi->irq); |
| if (irq_type == IRQ_TYPE_EDGE_RISING) { /* Default */ |
| val |= ADIS16480_DRDY_POL(1); |
| } else if (irq_type == IRQ_TYPE_EDGE_FALLING) { |
| val |= ADIS16480_DRDY_POL(0); |
| } else { |
| dev_err(dev, "Invalid interrupt type 0x%x specified\n", irq_type); |
| return -EINVAL; |
| } |
| /* Write the data ready configuration to the FNCTIO_CTRL register */ |
| return adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val); |
| } |
| |
| static int adis16480_fw_get_ext_clk_pin(struct adis16480 *st) |
| { |
| struct device *dev = &st->adis.spi->dev; |
| const char *ext_clk_pin; |
| enum adis16480_int_pin pin; |
| int i; |
| |
| pin = ADIS16480_PIN_DIO2; |
| if (device_property_read_string(dev, "adi,ext-clk-pin", &ext_clk_pin)) |
| goto clk_input_not_found; |
| |
| for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) { |
| if (strcasecmp(ext_clk_pin, adis16480_int_pin_names[i]) == 0) |
| return i; |
| } |
| |
| clk_input_not_found: |
| dev_info(dev, "clk input line not specified, using DIO2\n"); |
| return pin; |
| } |
| |
| static int adis16480_ext_clk_config(struct adis16480 *st, bool enable) |
| { |
| struct device *dev = &st->adis.spi->dev; |
| unsigned int mode, mask; |
| enum adis16480_int_pin pin; |
| uint16_t val; |
| int ret; |
| |
| ret = adis_read_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, &val); |
| if (ret) |
| return ret; |
| |
| pin = adis16480_fw_get_ext_clk_pin(st); |
| /* |
| * Each DIOx pin supports only one function at a time. When a single pin |
| * has two assignments, the enable bit for a lower priority function |
| * automatically resets to zero (disabling the lower priority function). |
| */ |
| if (pin == ADIS16480_DRDY_SEL(val)) |
| dev_warn(dev, "DIO%x pin supports only one function at a time\n", pin + 1); |
| |
| mode = ADIS16480_SYNC_EN(enable) | ADIS16480_SYNC_SEL(pin); |
| mask = ADIS16480_SYNC_EN_MSK | ADIS16480_SYNC_SEL_MSK; |
| /* Only ADIS1649x devices support pps ext clock mode */ |
| if (st->chip_info->has_pps_clk_mode) { |
| mode |= ADIS16480_SYNC_MODE(st->clk_mode); |
| mask |= ADIS16480_SYNC_MODE_MSK; |
| } |
| |
| val &= ~mask; |
| val |= mode; |
| |
| ret = adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val); |
| if (ret) |
| return ret; |
| |
| return clk_prepare_enable(st->ext_clk); |
| } |
| |
| static int adis16480_get_ext_clocks(struct adis16480 *st) |
| { |
| struct device *dev = &st->adis.spi->dev; |
| |
| st->ext_clk = devm_clk_get_optional(dev, "sync"); |
| if (IS_ERR(st->ext_clk)) |
| return dev_err_probe(dev, PTR_ERR(st->ext_clk), "failed to get ext clk\n"); |
| if (st->ext_clk) { |
| st->clk_mode = ADIS16480_CLK_SYNC; |
| return 0; |
| } |
| |
| if (st->chip_info->has_pps_clk_mode) { |
| st->ext_clk = devm_clk_get_optional(dev, "pps"); |
| if (IS_ERR(st->ext_clk)) |
| return dev_err_probe(dev, PTR_ERR(st->ext_clk), "failed to get ext clk\n"); |
| if (st->ext_clk) { |
| st->clk_mode = ADIS16480_CLK_PPS; |
| return 0; |
| } |
| } |
| |
| st->clk_mode = ADIS16480_CLK_INT; |
| return 0; |
| } |
| |
| static void adis16480_stop(void *data) |
| { |
| adis16480_stop_device(data); |
| } |
| |
| static void adis16480_clk_disable(void *data) |
| { |
| clk_disable_unprepare(data); |
| } |
| |
| static int adis16480_probe(struct spi_device *spi) |
| { |
| const struct spi_device_id *id = spi_get_device_id(spi); |
| const struct adis_data *adis16480_data; |
| irq_handler_t trigger_handler = NULL; |
| struct device *dev = &spi->dev; |
| struct iio_dev *indio_dev; |
| struct adis16480 *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| st->chip_info = &adis16480_chip_info[id->driver_data]; |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->channels = st->chip_info->channels; |
| indio_dev->num_channels = st->chip_info->num_channels; |
| if (st->chip_info->has_burst_delta_data) |
| indio_dev->available_scan_masks = adis16545_channel_masks; |
| indio_dev->info = &adis16480_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| adis16480_data = &st->chip_info->adis_data; |
| |
| ret = adis_init(&st->adis, indio_dev, spi, adis16480_data); |
| if (ret) |
| return ret; |
| |
| ret = __adis_initial_startup(&st->adis); |
| if (ret) |
| return ret; |
| |
| /* |
| * By default, use burst id for gyroscope and accelerometer data. |
| * This is the only option for devices which do not offer delta angle |
| * and delta velocity burst readings. |
| */ |
| st->burst_id = ADIS16495_GYRO_ACCEL_BURST_ID; |
| |
| if (st->chip_info->has_sleep_cnt) { |
| ret = devm_add_action_or_reset(dev, adis16480_stop, indio_dev); |
| if (ret) |
| return ret; |
| } |
| |
| ret = adis16480_config_irq_pin(st); |
| if (ret) |
| return ret; |
| |
| ret = adis16480_get_ext_clocks(st); |
| if (ret) |
| return ret; |
| |
| if (st->ext_clk) { |
| ret = adis16480_ext_clk_config(st, true); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(dev, adis16480_clk_disable, st->ext_clk); |
| if (ret) |
| return ret; |
| |
| st->clk_freq = clk_get_rate(st->ext_clk); |
| st->clk_freq *= 1000; /* micro */ |
| if (st->clk_mode == ADIS16480_CLK_PPS) { |
| u16 sync_scale; |
| |
| /* |
| * In PPS mode, the IMU sample rate is the clk_freq * sync_scale. Hence, |
| * default the IMU sample rate to the highest multiple of the input clock |
| * lower than the IMU max sample rate. The internal sample rate is the |
| * max... |
| */ |
| sync_scale = st->chip_info->int_clk / st->clk_freq; |
| ret = __adis_write_reg_16(&st->adis, ADIS16495_REG_SYNC_SCALE, sync_scale); |
| if (ret) |
| return ret; |
| } |
| } else { |
| st->clk_freq = st->chip_info->int_clk; |
| } |
| |
| /* Only use our trigger handler if burst mode is supported */ |
| if (adis16480_data->burst_len) |
| trigger_handler = adis16480_trigger_handler; |
| |
| ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, |
| trigger_handler); |
| if (ret) |
| return ret; |
| |
| ret = devm_iio_device_register(dev, indio_dev); |
| if (ret) |
| return ret; |
| |
| adis16480_debugfs_init(indio_dev); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id adis16480_ids[] = { |
| { "adis16375", ADIS16375 }, |
| { "adis16480", ADIS16480 }, |
| { "adis16485", ADIS16485 }, |
| { "adis16488", ADIS16488 }, |
| { "adis16490", ADIS16490 }, |
| { "adis16495-1", ADIS16495_1 }, |
| { "adis16495-2", ADIS16495_2 }, |
| { "adis16495-3", ADIS16495_3 }, |
| { "adis16497-1", ADIS16497_1 }, |
| { "adis16497-2", ADIS16497_2 }, |
| { "adis16497-3", ADIS16497_3 }, |
| { "adis16545-1", ADIS16545_1 }, |
| { "adis16545-2", ADIS16545_2 }, |
| { "adis16545-3", ADIS16545_3 }, |
| { "adis16547-1", ADIS16547_1 }, |
| { "adis16547-2", ADIS16547_2 }, |
| { "adis16547-3", ADIS16547_3 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, adis16480_ids); |
| |
| static const struct of_device_id adis16480_of_match[] = { |
| { .compatible = "adi,adis16375" }, |
| { .compatible = "adi,adis16480" }, |
| { .compatible = "adi,adis16485" }, |
| { .compatible = "adi,adis16488" }, |
| { .compatible = "adi,adis16490" }, |
| { .compatible = "adi,adis16495-1" }, |
| { .compatible = "adi,adis16495-2" }, |
| { .compatible = "adi,adis16495-3" }, |
| { .compatible = "adi,adis16497-1" }, |
| { .compatible = "adi,adis16497-2" }, |
| { .compatible = "adi,adis16497-3" }, |
| { .compatible = "adi,adis16545-1" }, |
| { .compatible = "adi,adis16545-2" }, |
| { .compatible = "adi,adis16545-3" }, |
| { .compatible = "adi,adis16547-1" }, |
| { .compatible = "adi,adis16547-2" }, |
| { .compatible = "adi,adis16547-3" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, adis16480_of_match); |
| |
| static struct spi_driver adis16480_driver = { |
| .driver = { |
| .name = "adis16480", |
| .of_match_table = adis16480_of_match, |
| }, |
| .id_table = adis16480_ids, |
| .probe = adis16480_probe, |
| }; |
| module_spi_driver(adis16480_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("Analog Devices ADIS16480 IMU driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(IIO_ADISLIB); |