| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/mfd/aat2870-core.c |
| * |
| * Copyright (c) 2011, NVIDIA Corporation. |
| * Author: Jin Park <jinyoungp@nvidia.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/debugfs.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/aat2870.h> |
| #include <linux/regulator/machine.h> |
| |
| static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = { |
| /* readable, writeable, value */ |
| { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */ |
| { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */ |
| { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */ |
| { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */ |
| { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */ |
| { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */ |
| { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */ |
| { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */ |
| { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */ |
| { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */ |
| { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */ |
| { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */ |
| { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */ |
| { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */ |
| { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */ |
| { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */ |
| { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */ |
| { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */ |
| { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */ |
| { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */ |
| { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */ |
| { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */ |
| { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */ |
| { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */ |
| { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */ |
| { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */ |
| { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */ |
| { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */ |
| { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */ |
| { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */ |
| { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */ |
| { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */ |
| { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */ |
| { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */ |
| { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */ |
| { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */ |
| { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */ |
| { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */ |
| { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */ |
| }; |
| |
| static struct mfd_cell aat2870_devs[] = { |
| { |
| .name = "aat2870-backlight", |
| .id = AAT2870_ID_BL, |
| .pdata_size = sizeof(struct aat2870_bl_platform_data), |
| }, |
| { |
| .name = "aat2870-regulator", |
| .id = AAT2870_ID_LDOA, |
| .pdata_size = sizeof(struct regulator_init_data), |
| }, |
| { |
| .name = "aat2870-regulator", |
| .id = AAT2870_ID_LDOB, |
| .pdata_size = sizeof(struct regulator_init_data), |
| }, |
| { |
| .name = "aat2870-regulator", |
| .id = AAT2870_ID_LDOC, |
| .pdata_size = sizeof(struct regulator_init_data), |
| }, |
| { |
| .name = "aat2870-regulator", |
| .id = AAT2870_ID_LDOD, |
| .pdata_size = sizeof(struct regulator_init_data), |
| }, |
| }; |
| |
| static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) |
| { |
| int ret; |
| |
| if (addr >= AAT2870_REG_NUM) { |
| dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); |
| return -EINVAL; |
| } |
| |
| if (!aat2870->reg_cache[addr].readable) { |
| *val = aat2870->reg_cache[addr].value; |
| goto out; |
| } |
| |
| ret = i2c_master_send(aat2870->client, &addr, 1); |
| if (ret < 0) |
| return ret; |
| if (ret != 1) |
| return -EIO; |
| |
| ret = i2c_master_recv(aat2870->client, val, 1); |
| if (ret < 0) |
| return ret; |
| if (ret != 1) |
| return -EIO; |
| |
| out: |
| dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val); |
| return 0; |
| } |
| |
| static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) |
| { |
| u8 msg[2]; |
| int ret; |
| |
| if (addr >= AAT2870_REG_NUM) { |
| dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); |
| return -EINVAL; |
| } |
| |
| if (!aat2870->reg_cache[addr].writeable) { |
| dev_err(aat2870->dev, "Address 0x%02x is not writeable\n", |
| addr); |
| return -EINVAL; |
| } |
| |
| msg[0] = addr; |
| msg[1] = val; |
| ret = i2c_master_send(aat2870->client, msg, 2); |
| if (ret < 0) |
| return ret; |
| if (ret != 2) |
| return -EIO; |
| |
| aat2870->reg_cache[addr].value = val; |
| |
| dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val); |
| return 0; |
| } |
| |
| static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) |
| { |
| int ret; |
| |
| mutex_lock(&aat2870->io_lock); |
| ret = __aat2870_read(aat2870, addr, val); |
| mutex_unlock(&aat2870->io_lock); |
| |
| return ret; |
| } |
| |
| static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&aat2870->io_lock); |
| ret = __aat2870_write(aat2870, addr, val); |
| mutex_unlock(&aat2870->io_lock); |
| |
| return ret; |
| } |
| |
| static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask, |
| u8 val) |
| { |
| int change; |
| u8 old_val, new_val; |
| int ret; |
| |
| mutex_lock(&aat2870->io_lock); |
| |
| ret = __aat2870_read(aat2870, addr, &old_val); |
| if (ret) |
| goto out_unlock; |
| |
| new_val = (old_val & ~mask) | (val & mask); |
| change = old_val != new_val; |
| if (change) |
| ret = __aat2870_write(aat2870, addr, new_val); |
| |
| out_unlock: |
| mutex_unlock(&aat2870->io_lock); |
| |
| return ret; |
| } |
| |
| static inline void aat2870_enable(struct aat2870_data *aat2870) |
| { |
| if (aat2870->en_pin >= 0) |
| gpio_set_value(aat2870->en_pin, 1); |
| |
| aat2870->is_enable = 1; |
| } |
| |
| static inline void aat2870_disable(struct aat2870_data *aat2870) |
| { |
| if (aat2870->en_pin >= 0) |
| gpio_set_value(aat2870->en_pin, 0); |
| |
| aat2870->is_enable = 0; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) |
| { |
| u8 addr, val; |
| ssize_t count = 0; |
| int ret; |
| |
| count += sprintf(buf, "aat2870 registers\n"); |
| for (addr = 0; addr < AAT2870_REG_NUM; addr++) { |
| count += snprintf(buf + count, PAGE_SIZE - count, "0x%02x: ", addr); |
| if (count >= PAGE_SIZE - 1) |
| break; |
| |
| ret = aat2870->read(aat2870, addr, &val); |
| if (ret == 0) |
| count += snprintf(buf + count, PAGE_SIZE - count, |
| "0x%02x", val); |
| else |
| count += snprintf(buf + count, PAGE_SIZE - count, |
| "<read fail: %d>", ret); |
| |
| if (count >= PAGE_SIZE - 1) |
| break; |
| |
| count += snprintf(buf + count, PAGE_SIZE - count, "\n"); |
| if (count >= PAGE_SIZE - 1) |
| break; |
| } |
| |
| /* Truncate count; min() would cause a warning */ |
| if (count >= PAGE_SIZE) |
| count = PAGE_SIZE - 1; |
| |
| return count; |
| } |
| |
| static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct aat2870_data *aat2870 = file->private_data; |
| char *buf; |
| ssize_t ret; |
| |
| buf = kmalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = aat2870_dump_reg(aat2870, buf); |
| if (ret >= 0) |
| ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static ssize_t aat2870_reg_write_file(struct file *file, |
| const char __user *user_buf, size_t count, |
| loff_t *ppos) |
| { |
| struct aat2870_data *aat2870 = file->private_data; |
| char buf[32]; |
| ssize_t buf_size; |
| char *start = buf; |
| unsigned long addr, val; |
| int ret; |
| |
| buf_size = min(count, (size_t)(sizeof(buf)-1)); |
| if (copy_from_user(buf, user_buf, buf_size)) { |
| dev_err(aat2870->dev, "Failed to copy from user\n"); |
| return -EFAULT; |
| } |
| buf[buf_size] = 0; |
| |
| while (*start == ' ') |
| start++; |
| |
| ret = kstrtoul(start, 16, &addr); |
| if (ret) |
| return ret; |
| |
| if (addr >= AAT2870_REG_NUM) { |
| dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr); |
| return -EINVAL; |
| } |
| |
| while (*start == ' ') |
| start++; |
| |
| ret = kstrtoul(start, 16, &val); |
| if (ret) |
| return ret; |
| |
| ret = aat2870->write(aat2870, (u8)addr, (u8)val); |
| if (ret) |
| return ret; |
| |
| return buf_size; |
| } |
| |
| static const struct file_operations aat2870_reg_fops = { |
| .open = simple_open, |
| .read = aat2870_reg_read_file, |
| .write = aat2870_reg_write_file, |
| }; |
| |
| static void aat2870_init_debugfs(struct aat2870_data *aat2870) |
| { |
| aat2870->dentry_root = debugfs_create_dir("aat2870", NULL); |
| |
| debugfs_create_file("regs", 0644, aat2870->dentry_root, aat2870, |
| &aat2870_reg_fops); |
| } |
| |
| #else |
| static inline void aat2870_init_debugfs(struct aat2870_data *aat2870) |
| { |
| } |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| static int aat2870_i2c_probe(struct i2c_client *client) |
| { |
| struct aat2870_platform_data *pdata = dev_get_platdata(&client->dev); |
| struct aat2870_data *aat2870; |
| int i, j; |
| int ret = 0; |
| |
| aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data), |
| GFP_KERNEL); |
| if (!aat2870) |
| return -ENOMEM; |
| |
| aat2870->dev = &client->dev; |
| aat2870->client = client; |
| i2c_set_clientdata(client, aat2870); |
| |
| aat2870->reg_cache = aat2870_regs; |
| |
| if (pdata->en_pin < 0) |
| aat2870->en_pin = -1; |
| else |
| aat2870->en_pin = pdata->en_pin; |
| |
| aat2870->init = pdata->init; |
| aat2870->uninit = pdata->uninit; |
| aat2870->read = aat2870_read; |
| aat2870->write = aat2870_write; |
| aat2870->update = aat2870_update; |
| |
| mutex_init(&aat2870->io_lock); |
| |
| if (aat2870->init) |
| aat2870->init(aat2870); |
| |
| if (aat2870->en_pin >= 0) { |
| ret = devm_gpio_request_one(&client->dev, aat2870->en_pin, |
| GPIOF_OUT_INIT_HIGH, "aat2870-en"); |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "Failed to request GPIO %d\n", aat2870->en_pin); |
| return ret; |
| } |
| } |
| |
| aat2870_enable(aat2870); |
| |
| for (i = 0; i < pdata->num_subdevs; i++) { |
| for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) { |
| if ((pdata->subdevs[i].id == aat2870_devs[j].id) && |
| !strcmp(pdata->subdevs[i].name, |
| aat2870_devs[j].name)) { |
| aat2870_devs[j].platform_data = |
| pdata->subdevs[i].platform_data; |
| break; |
| } |
| } |
| } |
| |
| ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, |
| ARRAY_SIZE(aat2870_devs), NULL, 0, NULL); |
| if (ret != 0) { |
| dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); |
| goto out_disable; |
| } |
| |
| aat2870_init_debugfs(aat2870); |
| |
| return 0; |
| |
| out_disable: |
| aat2870_disable(aat2870); |
| return ret; |
| } |
| |
| static int aat2870_i2c_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct aat2870_data *aat2870 = i2c_get_clientdata(client); |
| |
| aat2870_disable(aat2870); |
| |
| return 0; |
| } |
| |
| static int aat2870_i2c_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct aat2870_data *aat2870 = i2c_get_clientdata(client); |
| struct aat2870_register *reg = NULL; |
| int i; |
| |
| aat2870_enable(aat2870); |
| |
| /* restore registers */ |
| for (i = 0; i < AAT2870_REG_NUM; i++) { |
| reg = &aat2870->reg_cache[i]; |
| if (reg->writeable) |
| aat2870->write(aat2870, i, reg->value); |
| } |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(aat2870_pm_ops, aat2870_i2c_suspend, |
| aat2870_i2c_resume); |
| |
| static const struct i2c_device_id aat2870_i2c_id_table[] = { |
| { "aat2870" }, |
| { } |
| }; |
| |
| static struct i2c_driver aat2870_i2c_driver = { |
| .driver = { |
| .name = "aat2870", |
| .pm = pm_sleep_ptr(&aat2870_pm_ops), |
| .suppress_bind_attrs = true, |
| }, |
| .probe = aat2870_i2c_probe, |
| .id_table = aat2870_i2c_id_table, |
| }; |
| |
| static int __init aat2870_init(void) |
| { |
| return i2c_add_driver(&aat2870_i2c_driver); |
| } |
| subsys_initcall(aat2870_init); |