| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller | 
 |  * | 
 |  * Copyright 2022 NXP | 
 |  * Copyright 2024 Ideas on Board Oy | 
 |  */ | 
 |  | 
 | #include <linux/array_size.h> | 
 | #include <linux/device.h> | 
 | #include <linux/err.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/mfd/adp5585.h> | 
 | #include <linux/mfd/core.h> | 
 | #include <linux/mod_devicetable.h> | 
 | #include <linux/module.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/types.h> | 
 |  | 
 | static const struct mfd_cell adp5585_devs[] = { | 
 | 	{ .name = "adp5585-gpio", }, | 
 | 	{ .name = "adp5585-pwm", }, | 
 | }; | 
 |  | 
 | static const struct regmap_range adp5585_volatile_ranges[] = { | 
 | 	regmap_reg_range(ADP5585_ID, ADP5585_GPI_STATUS_B), | 
 | }; | 
 |  | 
 | static const struct regmap_access_table adp5585_volatile_regs = { | 
 | 	.yes_ranges = adp5585_volatile_ranges, | 
 | 	.n_yes_ranges = ARRAY_SIZE(adp5585_volatile_ranges), | 
 | }; | 
 |  | 
 | /* | 
 |  * Chip variants differ in the default configuration of pull-up and pull-down | 
 |  * resistors, and therefore have different default register values: | 
 |  * | 
 |  * - The -00, -01 and -03 variants (collectively referred to as | 
 |  *   ADP5585_REGMAP_00) have pull-up on all GPIO pins by default. | 
 |  * - The -02 variant has no default pull-up or pull-down resistors. | 
 |  * - The -04 variant has default pull-down resistors on all GPIO pins. | 
 |  */ | 
 |  | 
 | static const u8 adp5585_regmap_defaults_00[ADP5585_MAX_REG + 1] = { | 
 | 	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x18 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | }; | 
 |  | 
 | static const u8 adp5585_regmap_defaults_02[ADP5585_MAX_REG + 1] = { | 
 | 	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, | 
 | 	/* 0x18 */ 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | }; | 
 |  | 
 | static const u8 adp5585_regmap_defaults_04[ADP5585_MAX_REG + 1] = { | 
 | 	/* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, | 
 | 	/* 0x18 */ 0x05, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | 	/* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | 
 | }; | 
 |  | 
 | enum adp5585_regmap_type { | 
 | 	ADP5585_REGMAP_00, | 
 | 	ADP5585_REGMAP_02, | 
 | 	ADP5585_REGMAP_04, | 
 | }; | 
 |  | 
 | static const struct regmap_config adp5585_regmap_configs[] = { | 
 | 	[ADP5585_REGMAP_00] = { | 
 | 		.reg_bits = 8, | 
 | 		.val_bits = 8, | 
 | 		.max_register = ADP5585_MAX_REG, | 
 | 		.volatile_table = &adp5585_volatile_regs, | 
 | 		.cache_type = REGCACHE_MAPLE, | 
 | 		.reg_defaults_raw = adp5585_regmap_defaults_00, | 
 | 		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_00), | 
 | 	}, | 
 | 	[ADP5585_REGMAP_02] = { | 
 | 		.reg_bits = 8, | 
 | 		.val_bits = 8, | 
 | 		.max_register = ADP5585_MAX_REG, | 
 | 		.volatile_table = &adp5585_volatile_regs, | 
 | 		.cache_type = REGCACHE_MAPLE, | 
 | 		.reg_defaults_raw = adp5585_regmap_defaults_02, | 
 | 		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_02), | 
 | 	}, | 
 | 	[ADP5585_REGMAP_04] = { | 
 | 		.reg_bits = 8, | 
 | 		.val_bits = 8, | 
 | 		.max_register = ADP5585_MAX_REG, | 
 | 		.volatile_table = &adp5585_volatile_regs, | 
 | 		.cache_type = REGCACHE_MAPLE, | 
 | 		.reg_defaults_raw = adp5585_regmap_defaults_04, | 
 | 		.num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_04), | 
 | 	}, | 
 | }; | 
 |  | 
 | static int adp5585_i2c_probe(struct i2c_client *i2c) | 
 | { | 
 | 	const struct regmap_config *regmap_config; | 
 | 	struct adp5585_dev *adp5585; | 
 | 	unsigned int id; | 
 | 	int ret; | 
 |  | 
 | 	adp5585 = devm_kzalloc(&i2c->dev, sizeof(*adp5585), GFP_KERNEL); | 
 | 	if (!adp5585) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	i2c_set_clientdata(i2c, adp5585); | 
 |  | 
 | 	regmap_config = i2c_get_match_data(i2c); | 
 | 	adp5585->regmap = devm_regmap_init_i2c(i2c, regmap_config); | 
 | 	if (IS_ERR(adp5585->regmap)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(adp5585->regmap), | 
 | 				     "Failed to initialize register map\n"); | 
 |  | 
 | 	ret = regmap_read(adp5585->regmap, ADP5585_ID, &id); | 
 | 	if (ret) | 
 | 		return dev_err_probe(&i2c->dev, ret, | 
 | 				     "Failed to read device ID\n"); | 
 |  | 
 | 	if ((id & ADP5585_MAN_ID_MASK) != ADP5585_MAN_ID_VALUE) | 
 | 		return dev_err_probe(&i2c->dev, -ENODEV, | 
 | 				     "Invalid device ID 0x%02x\n", id); | 
 |  | 
 | 	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, | 
 | 				   adp5585_devs, ARRAY_SIZE(adp5585_devs), | 
 | 				   NULL, 0, NULL); | 
 | 	if (ret) | 
 | 		return dev_err_probe(&i2c->dev, ret, | 
 | 				     "Failed to add child devices\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int adp5585_suspend(struct device *dev) | 
 | { | 
 | 	struct adp5585_dev *adp5585 = dev_get_drvdata(dev); | 
 |  | 
 | 	regcache_cache_only(adp5585->regmap, true); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int adp5585_resume(struct device *dev) | 
 | { | 
 | 	struct adp5585_dev *adp5585 = dev_get_drvdata(dev); | 
 |  | 
 | 	regcache_cache_only(adp5585->regmap, false); | 
 | 	regcache_mark_dirty(adp5585->regmap); | 
 |  | 
 | 	return regcache_sync(adp5585->regmap); | 
 | } | 
 |  | 
 | static DEFINE_SIMPLE_DEV_PM_OPS(adp5585_pm, adp5585_suspend, adp5585_resume); | 
 |  | 
 | static const struct of_device_id adp5585_of_match[] = { | 
 | 	{ | 
 | 		.compatible = "adi,adp5585-00", | 
 | 		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | 
 | 	}, { | 
 | 		.compatible = "adi,adp5585-01", | 
 | 		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | 
 | 	}, { | 
 | 		.compatible = "adi,adp5585-02", | 
 | 		.data = &adp5585_regmap_configs[ADP5585_REGMAP_02], | 
 | 	}, { | 
 | 		.compatible = "adi,adp5585-03", | 
 | 		.data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | 
 | 	}, { | 
 | 		.compatible = "adi,adp5585-04", | 
 | 		.data = &adp5585_regmap_configs[ADP5585_REGMAP_04], | 
 | 	}, | 
 | 	{ /* sentinel */ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, adp5585_of_match); | 
 |  | 
 | static struct i2c_driver adp5585_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "adp5585", | 
 | 		.of_match_table = adp5585_of_match, | 
 | 		.pm = pm_sleep_ptr(&adp5585_pm), | 
 | 	}, | 
 | 	.probe = adp5585_i2c_probe, | 
 | }; | 
 | module_i2c_driver(adp5585_i2c_driver); | 
 |  | 
 | MODULE_DESCRIPTION("ADP5585 core driver"); | 
 | MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); | 
 | MODULE_LICENSE("GPL"); |