| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * AXP20x pinctrl and GPIO driver | 
 |  * | 
 |  * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> | 
 |  * Copyright (C) 2017 Quentin Schulz <quentin.schulz@free-electrons.com> | 
 |  */ | 
 |  | 
 | #include <linux/bitops.h> | 
 | #include <linux/device.h> | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/mfd/axp20x.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <linux/pinctrl/consumer.h> | 
 | #include <linux/pinctrl/pinconf-generic.h> | 
 | #include <linux/pinctrl/pinctrl.h> | 
 | #include <linux/pinctrl/pinmux.h> | 
 |  | 
 | #define AXP20X_GPIO_FUNCTIONS		0x7 | 
 | #define AXP20X_GPIO_FUNCTION_OUT_LOW	0 | 
 | #define AXP20X_GPIO_FUNCTION_OUT_HIGH	1 | 
 | #define AXP20X_GPIO_FUNCTION_INPUT	2 | 
 |  | 
 | #define AXP20X_GPIO3_FUNCTIONS		GENMASK(2, 1) | 
 | #define AXP20X_GPIO3_FUNCTION_OUT_LOW	0 | 
 | #define AXP20X_GPIO3_FUNCTION_OUT_HIGH	2 | 
 | #define AXP20X_GPIO3_FUNCTION_INPUT	4 | 
 |  | 
 | #define AXP20X_FUNC_GPIO_OUT		0 | 
 | #define AXP20X_FUNC_GPIO_IN		1 | 
 | #define AXP20X_FUNC_LDO			2 | 
 | #define AXP20X_FUNC_ADC			3 | 
 | #define AXP20X_FUNCS_NB			4 | 
 |  | 
 | #define AXP20X_MUX_GPIO_OUT		0 | 
 | #define AXP20X_MUX_GPIO_IN		BIT(1) | 
 | #define AXP20X_MUX_ADC			BIT(2) | 
 |  | 
 | #define AXP813_MUX_ADC			(BIT(2) | BIT(0)) | 
 |  | 
 | struct axp20x_pctrl_desc { | 
 | 	const struct pinctrl_pin_desc	*pins; | 
 | 	unsigned int			npins; | 
 | 	/* Stores the pins supporting LDO function. Bit offset is pin number. */ | 
 | 	u8				ldo_mask; | 
 | 	/* Stores the pins supporting ADC function. Bit offset is pin number. */ | 
 | 	u8				adc_mask; | 
 | 	u8				gpio_status_offset; | 
 | 	u8				adc_mux; | 
 | }; | 
 |  | 
 | struct axp20x_pinctrl_function { | 
 | 	const char	*name; | 
 | 	unsigned int	muxval; | 
 | 	const char	**groups; | 
 | 	unsigned int	ngroups; | 
 | }; | 
 |  | 
 | struct axp20x_pctl { | 
 | 	struct gpio_chip	chip; | 
 | 	struct regmap		*regmap; | 
 | 	struct pinctrl_dev			*pctl_dev; | 
 | 	struct device				*dev; | 
 | 	const struct axp20x_pctrl_desc		*desc; | 
 | 	struct axp20x_pinctrl_function		funcs[AXP20X_FUNCS_NB]; | 
 | }; | 
 |  | 
 | static const struct pinctrl_pin_desc axp209_pins[] = { | 
 | 	PINCTRL_PIN(0, "GPIO0"), | 
 | 	PINCTRL_PIN(1, "GPIO1"), | 
 | 	PINCTRL_PIN(2, "GPIO2"), | 
 | 	PINCTRL_PIN(3, "GPIO3"), | 
 | }; | 
 |  | 
 | static const struct pinctrl_pin_desc axp22x_pins[] = { | 
 | 	PINCTRL_PIN(0, "GPIO0"), | 
 | 	PINCTRL_PIN(1, "GPIO1"), | 
 | }; | 
 |  | 
 | static const struct axp20x_pctrl_desc axp20x_data = { | 
 | 	.pins	= axp209_pins, | 
 | 	.npins	= ARRAY_SIZE(axp209_pins), | 
 | 	.ldo_mask = BIT(0) | BIT(1), | 
 | 	.adc_mask = BIT(0) | BIT(1), | 
 | 	.gpio_status_offset = 4, | 
 | 	.adc_mux = AXP20X_MUX_ADC, | 
 | }; | 
 |  | 
 | static const struct axp20x_pctrl_desc axp22x_data = { | 
 | 	.pins	= axp22x_pins, | 
 | 	.npins	= ARRAY_SIZE(axp22x_pins), | 
 | 	.ldo_mask = BIT(0) | BIT(1), | 
 | 	.gpio_status_offset = 0, | 
 | }; | 
 |  | 
 | static const struct axp20x_pctrl_desc axp813_data = { | 
 | 	.pins	= axp22x_pins, | 
 | 	.npins	= ARRAY_SIZE(axp22x_pins), | 
 | 	.ldo_mask = BIT(0) | BIT(1), | 
 | 	.adc_mask = BIT(0), | 
 | 	.gpio_status_offset = 0, | 
 | 	.adc_mux = AXP813_MUX_ADC, | 
 | }; | 
 |  | 
 | static int axp20x_gpio_get_reg(unsigned int offset) | 
 | { | 
 | 	switch (offset) { | 
 | 	case 0: | 
 | 		return AXP20X_GPIO0_CTRL; | 
 | 	case 1: | 
 | 		return AXP20X_GPIO1_CTRL; | 
 | 	case 2: | 
 | 		return AXP20X_GPIO2_CTRL; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int axp20x_gpio_get(struct gpio_chip *chip, unsigned int offset) | 
 | { | 
 | 	struct axp20x_pctl *pctl = gpiochip_get_data(chip); | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	/* AXP209 has GPIO3 status sharing the settings register */ | 
 | 	if (offset == 3) { | 
 | 		ret = regmap_read(pctl->regmap, AXP20X_GPIO3_CTRL, &val); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		return !!(val & BIT(0)); | 
 | 	} | 
 |  | 
 | 	ret = regmap_read(pctl->regmap, AXP20X_GPIO20_SS, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return !!(val & BIT(offset + pctl->desc->gpio_status_offset)); | 
 | } | 
 |  | 
 | static int axp20x_gpio_get_direction(struct gpio_chip *chip, | 
 | 				     unsigned int offset) | 
 | { | 
 | 	struct axp20x_pctl *pctl = gpiochip_get_data(chip); | 
 | 	unsigned int val; | 
 | 	int reg, ret; | 
 |  | 
 | 	/* AXP209 GPIO3 settings have a different layout */ | 
 | 	if (offset == 3) { | 
 | 		ret = regmap_read(pctl->regmap, AXP20X_GPIO3_CTRL, &val); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		if (val & AXP20X_GPIO3_FUNCTION_INPUT) | 
 | 			return GPIO_LINE_DIRECTION_IN; | 
 |  | 
 | 		return GPIO_LINE_DIRECTION_OUT; | 
 | 	} | 
 |  | 
 | 	reg = axp20x_gpio_get_reg(offset); | 
 | 	if (reg < 0) | 
 | 		return reg; | 
 |  | 
 | 	ret = regmap_read(pctl->regmap, reg, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * This shouldn't really happen if the pin is in use already, | 
 | 	 * or if it's not in use yet, it doesn't matter since we're | 
 | 	 * going to change the value soon anyway. Default to output. | 
 | 	 */ | 
 | 	if ((val & AXP20X_GPIO_FUNCTIONS) > 2) | 
 | 		return GPIO_LINE_DIRECTION_OUT; | 
 |  | 
 | 	/* | 
 | 	 * The GPIO directions are the three lowest values. | 
 | 	 * 2 is input, 0 and 1 are output | 
 | 	 */ | 
 | 	if (val & 2) | 
 | 		return GPIO_LINE_DIRECTION_IN; | 
 |  | 
 | 	return GPIO_LINE_DIRECTION_OUT; | 
 | } | 
 |  | 
 | static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset, | 
 | 			      int value) | 
 | { | 
 | 	chip->set(chip, offset, value); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void axp20x_gpio_set(struct gpio_chip *chip, unsigned int offset, | 
 | 			    int value) | 
 | { | 
 | 	struct axp20x_pctl *pctl = gpiochip_get_data(chip); | 
 | 	int reg; | 
 |  | 
 | 	/* AXP209 has GPIO3 status sharing the settings register */ | 
 | 	if (offset == 3) { | 
 | 		regmap_update_bits(pctl->regmap, AXP20X_GPIO3_CTRL, | 
 | 				   AXP20X_GPIO3_FUNCTIONS, | 
 | 				   value ? AXP20X_GPIO3_FUNCTION_OUT_HIGH : | 
 | 				   AXP20X_GPIO3_FUNCTION_OUT_LOW); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	reg = axp20x_gpio_get_reg(offset); | 
 | 	if (reg < 0) | 
 | 		return; | 
 |  | 
 | 	regmap_update_bits(pctl->regmap, reg, | 
 | 			   AXP20X_GPIO_FUNCTIONS, | 
 | 			   value ? AXP20X_GPIO_FUNCTION_OUT_HIGH : | 
 | 			   AXP20X_GPIO_FUNCTION_OUT_LOW); | 
 | } | 
 |  | 
 | static int axp20x_pmx_set(struct pinctrl_dev *pctldev, unsigned int offset, | 
 | 			  u8 config) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 | 	int reg; | 
 |  | 
 | 	/* AXP209 GPIO3 settings have a different layout */ | 
 | 	if (offset == 3) { | 
 | 		return regmap_update_bits(pctl->regmap, AXP20X_GPIO3_CTRL, | 
 | 				   AXP20X_GPIO3_FUNCTIONS, | 
 | 				   config == AXP20X_MUX_GPIO_OUT ? AXP20X_GPIO3_FUNCTION_OUT_LOW : | 
 | 				   AXP20X_GPIO3_FUNCTION_INPUT); | 
 | 	} | 
 |  | 
 | 	reg = axp20x_gpio_get_reg(offset); | 
 | 	if (reg < 0) | 
 | 		return reg; | 
 |  | 
 | 	return regmap_update_bits(pctl->regmap, reg, AXP20X_GPIO_FUNCTIONS, | 
 | 				  config); | 
 | } | 
 |  | 
 | static int axp20x_pmx_func_cnt(struct pinctrl_dev *pctldev) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	return ARRAY_SIZE(pctl->funcs); | 
 | } | 
 |  | 
 | static const char *axp20x_pmx_func_name(struct pinctrl_dev *pctldev, | 
 | 					unsigned int selector) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	return pctl->funcs[selector].name; | 
 | } | 
 |  | 
 | static int axp20x_pmx_func_groups(struct pinctrl_dev *pctldev, | 
 | 				  unsigned int selector, | 
 | 				  const char * const **groups, | 
 | 				  unsigned int *num_groups) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	*groups = pctl->funcs[selector].groups; | 
 | 	*num_groups = pctl->funcs[selector].ngroups; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int axp20x_pmx_set_mux(struct pinctrl_dev *pctldev, | 
 | 			      unsigned int function, unsigned int group) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 | 	unsigned int mask; | 
 |  | 
 | 	/* Every pin supports GPIO_OUT and GPIO_IN functions */ | 
 | 	if (function <= AXP20X_FUNC_GPIO_IN) | 
 | 		return axp20x_pmx_set(pctldev, group, | 
 | 				      pctl->funcs[function].muxval); | 
 |  | 
 | 	if (function == AXP20X_FUNC_LDO) | 
 | 		mask = pctl->desc->ldo_mask; | 
 | 	else | 
 | 		mask = pctl->desc->adc_mask; | 
 |  | 
 | 	if (!(BIT(group) & mask)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * We let the regulator framework handle the LDO muxing as muxing bits | 
 | 	 * are basically also regulators on/off bits. It's better not to enforce | 
 | 	 * any state of the regulator when selecting LDO mux so that we don't | 
 | 	 * interfere with the regulator driver. | 
 | 	 */ | 
 | 	if (function == AXP20X_FUNC_LDO) | 
 | 		return 0; | 
 |  | 
 | 	return axp20x_pmx_set(pctldev, group, pctl->funcs[function].muxval); | 
 | } | 
 |  | 
 | static int axp20x_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, | 
 | 					 struct pinctrl_gpio_range *range, | 
 | 					 unsigned int offset, bool input) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	if (input) | 
 | 		return axp20x_pmx_set(pctldev, offset, | 
 | 				      pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval); | 
 |  | 
 | 	return axp20x_pmx_set(pctldev, offset, | 
 | 			      pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval); | 
 | } | 
 |  | 
 | static const struct pinmux_ops axp20x_pmx_ops = { | 
 | 	.get_functions_count	= axp20x_pmx_func_cnt, | 
 | 	.get_function_name	= axp20x_pmx_func_name, | 
 | 	.get_function_groups	= axp20x_pmx_func_groups, | 
 | 	.set_mux		= axp20x_pmx_set_mux, | 
 | 	.gpio_set_direction	= axp20x_pmx_gpio_set_direction, | 
 | 	.strict			= true, | 
 | }; | 
 |  | 
 | static int axp20x_groups_cnt(struct pinctrl_dev *pctldev) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	return pctl->desc->npins; | 
 | } | 
 |  | 
 | static int axp20x_group_pins(struct pinctrl_dev *pctldev, unsigned int selector, | 
 | 			     const unsigned int **pins, unsigned int *num_pins) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	*pins = (unsigned int *)&pctl->desc->pins[selector]; | 
 | 	*num_pins = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const char *axp20x_group_name(struct pinctrl_dev *pctldev, | 
 | 				     unsigned int selector) | 
 | { | 
 | 	struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | 
 |  | 
 | 	return pctl->desc->pins[selector].name; | 
 | } | 
 |  | 
 | static const struct pinctrl_ops axp20x_pctrl_ops = { | 
 | 	.dt_node_to_map		= pinconf_generic_dt_node_to_map_group, | 
 | 	.dt_free_map		= pinconf_generic_dt_free_map, | 
 | 	.get_groups_count	= axp20x_groups_cnt, | 
 | 	.get_group_name		= axp20x_group_name, | 
 | 	.get_group_pins		= axp20x_group_pins, | 
 | }; | 
 |  | 
 | static int axp20x_funcs_groups_from_mask(struct device *dev, unsigned int mask, | 
 | 					  unsigned int mask_len, | 
 | 					  struct axp20x_pinctrl_function *func, | 
 | 					  const struct pinctrl_pin_desc *pins) | 
 | { | 
 | 	unsigned long int mask_cpy = mask; | 
 | 	const char **group; | 
 | 	unsigned int ngroups = hweight8(mask); | 
 | 	int bit; | 
 |  | 
 | 	func->ngroups = ngroups; | 
 | 	if (func->ngroups > 0) { | 
 | 		func->groups = devm_kcalloc(dev, | 
 | 					    ngroups, sizeof(const char *), | 
 | 					    GFP_KERNEL); | 
 | 		if (!func->groups) | 
 | 			return -ENOMEM; | 
 | 		group = func->groups; | 
 | 		for_each_set_bit(bit, &mask_cpy, mask_len) { | 
 | 			*group = pins[bit].name; | 
 | 			group++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int axp20x_build_funcs_groups(struct platform_device *pdev) | 
 | { | 
 | 	struct axp20x_pctl *pctl = platform_get_drvdata(pdev); | 
 | 	int i, ret, pin, npins = pctl->desc->npins; | 
 |  | 
 | 	pctl->funcs[AXP20X_FUNC_GPIO_OUT].name = "gpio_out"; | 
 | 	pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval = AXP20X_MUX_GPIO_OUT; | 
 | 	pctl->funcs[AXP20X_FUNC_GPIO_IN].name = "gpio_in"; | 
 | 	pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval = AXP20X_MUX_GPIO_IN; | 
 | 	pctl->funcs[AXP20X_FUNC_LDO].name = "ldo"; | 
 | 	/* | 
 | 	 * Muxval for LDO is useless as we won't use it. | 
 | 	 * See comment in axp20x_pmx_set_mux. | 
 | 	 */ | 
 | 	pctl->funcs[AXP20X_FUNC_ADC].name = "adc"; | 
 | 	pctl->funcs[AXP20X_FUNC_ADC].muxval = pctl->desc->adc_mux; | 
 |  | 
 | 	/* Every pin supports GPIO_OUT and GPIO_IN functions */ | 
 | 	for (i = 0; i <= AXP20X_FUNC_GPIO_IN; i++) { | 
 | 		pctl->funcs[i].ngroups = npins; | 
 | 		pctl->funcs[i].groups = devm_kcalloc(&pdev->dev, | 
 | 						     npins, sizeof(char *), | 
 | 						     GFP_KERNEL); | 
 | 		if (!pctl->funcs[i].groups) | 
 | 			return -ENOMEM; | 
 | 		for (pin = 0; pin < npins; pin++) | 
 | 			pctl->funcs[i].groups[pin] = pctl->desc->pins[pin].name; | 
 | 	} | 
 |  | 
 | 	ret = axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->ldo_mask, | 
 | 				      npins, &pctl->funcs[AXP20X_FUNC_LDO], | 
 | 				      pctl->desc->pins); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->adc_mask, | 
 | 				      npins, &pctl->funcs[AXP20X_FUNC_ADC], | 
 | 				      pctl->desc->pins); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id axp20x_pctl_match[] = { | 
 | 	{ .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, }, | 
 | 	{ .compatible = "x-powers,axp221-gpio", .data = &axp22x_data, }, | 
 | 	{ .compatible = "x-powers,axp813-gpio", .data = &axp813_data, }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, axp20x_pctl_match); | 
 |  | 
 | static int axp20x_pctl_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); | 
 | 	struct axp20x_pctl *pctl; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct pinctrl_desc *pctrl_desc; | 
 | 	int ret; | 
 |  | 
 | 	if (!of_device_is_available(pdev->dev.of_node)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!axp20x) { | 
 | 		dev_err(&pdev->dev, "Parent drvdata not set\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); | 
 | 	if (!pctl) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pctl->chip.base			= -1; | 
 | 	pctl->chip.can_sleep		= true; | 
 | 	pctl->chip.request		= gpiochip_generic_request; | 
 | 	pctl->chip.free			= gpiochip_generic_free; | 
 | 	pctl->chip.parent		= &pdev->dev; | 
 | 	pctl->chip.label		= dev_name(&pdev->dev); | 
 | 	pctl->chip.owner		= THIS_MODULE; | 
 | 	pctl->chip.get			= axp20x_gpio_get; | 
 | 	pctl->chip.get_direction	= axp20x_gpio_get_direction; | 
 | 	pctl->chip.set			= axp20x_gpio_set; | 
 | 	pctl->chip.direction_input	= pinctrl_gpio_direction_input; | 
 | 	pctl->chip.direction_output	= axp20x_gpio_output; | 
 |  | 
 | 	pctl->desc = of_device_get_match_data(dev); | 
 |  | 
 | 	pctl->chip.ngpio		= pctl->desc->npins; | 
 |  | 
 | 	pctl->regmap = axp20x->regmap; | 
 | 	pctl->dev = &pdev->dev; | 
 |  | 
 | 	platform_set_drvdata(pdev, pctl); | 
 |  | 
 | 	ret = axp20x_build_funcs_groups(pdev); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed to build groups\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	pctrl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctrl_desc), GFP_KERNEL); | 
 | 	if (!pctrl_desc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pctrl_desc->name = dev_name(&pdev->dev); | 
 | 	pctrl_desc->owner = THIS_MODULE; | 
 | 	pctrl_desc->pins = pctl->desc->pins; | 
 | 	pctrl_desc->npins = pctl->desc->npins; | 
 | 	pctrl_desc->pctlops = &axp20x_pctrl_ops; | 
 | 	pctrl_desc->pmxops = &axp20x_pmx_ops; | 
 |  | 
 | 	pctl->pctl_dev = devm_pinctrl_register(&pdev->dev, pctrl_desc, pctl); | 
 | 	if (IS_ERR(pctl->pctl_dev)) { | 
 | 		dev_err(&pdev->dev, "couldn't register pinctrl driver\n"); | 
 | 		return PTR_ERR(pctl->pctl_dev); | 
 | 	} | 
 |  | 
 | 	ret = devm_gpiochip_add_data(&pdev->dev, &pctl->chip, pctl); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "Failed to register GPIO chip\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = gpiochip_add_pin_range(&pctl->chip, dev_name(&pdev->dev), | 
 | 				     pctl->desc->pins->number, | 
 | 				     pctl->desc->pins->number, | 
 | 				     pctl->desc->npins); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed to add pin range\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	dev_info(&pdev->dev, "AXP209 pinctrl and GPIO driver loaded\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver axp20x_pctl_driver = { | 
 | 	.probe		= axp20x_pctl_probe, | 
 | 	.driver = { | 
 | 		.name		= "axp20x-gpio", | 
 | 		.of_match_table	= axp20x_pctl_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(axp20x_pctl_driver); | 
 |  | 
 | MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); | 
 | MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); | 
 | MODULE_DESCRIPTION("AXP20x PMIC pinctrl and GPIO driver"); | 
 | MODULE_LICENSE("GPL"); |