| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Shared application/kernel submission and completion ring pairs, for | |
| * supporting fast/efficient IO. | |
| * | |
| * A note on the read/write ordering memory barriers that are matched between | |
| * the application and kernel side. | |
| * | |
| * After the application reads the CQ ring tail, it must use an | |
| * appropriate smp_rmb() to pair with the smp_wmb() the kernel uses | |
| * before writing the tail (using smp_load_acquire to read the tail will | |
| * do). It also needs a smp_mb() before updating CQ head (ordering the | |
| * entry load(s) with the head store), pairing with an implicit barrier | |
| * through a control-dependency in io_get_cqe (smp_store_release to | |
| * store head will do). Failure to do so could lead to reading invalid | |
| * CQ entries. | |
| * | |
| * Likewise, the application must use an appropriate smp_wmb() before | |
| * writing the SQ tail (ordering SQ entry stores with the tail store), | |
| * which pairs with smp_load_acquire in io_get_sqring (smp_store_release | |
| * to store the tail will do). And it needs a barrier ordering the SQ | |
| * head load before writing new SQ entries (smp_load_acquire to read | |
| * head will do). | |
| * | |
| * When using the SQ poll thread (IORING_SETUP_SQPOLL), the application | |
| * needs to check the SQ flags for IORING_SQ_NEED_WAKEUP *after* | |
| * updating the SQ tail; a full memory barrier smp_mb() is needed | |
| * between. | |
| * | |
| * Also see the examples in the liburing library: | |
| * | |
| * git://git.kernel.dk/liburing | |
| * | |
| * io_uring also uses READ/WRITE_ONCE() for _any_ store or load that happens | |
| * from data shared between the kernel and application. This is done both | |
| * for ordering purposes, but also to ensure that once a value is loaded from | |
| * data that the application could potentially modify, it remains stable. | |
| * | |
| * Copyright (C) 2018-2019 Jens Axboe | |
| * Copyright (c) 2018-2019 Christoph Hellwig | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/syscalls.h> | |
| #include <net/compat.h> | |
| #include <linux/refcount.h> | |
| #include <linux/uio.h> | |
| #include <linux/bits.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/fs.h> | |
| #include <linux/file.h> | |
| #include <linux/fdtable.h> | |
| #include <linux/mm.h> | |
| #include <linux/mman.h> | |
| #include <linux/percpu.h> | |
| #include <linux/slab.h> | |
| #include <linux/bvec.h> | |
| #include <linux/net.h> | |
| #include <net/sock.h> | |
| #include <net/af_unix.h> | |
| #include <linux/anon_inodes.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/nospec.h> | |
| #include <linux/highmem.h> | |
| #include <linux/fsnotify.h> | |
| #include <linux/fadvise.h> | |
| #include <linux/task_work.h> | |
| #include <linux/io_uring.h> | |
| #include <linux/audit.h> | |
| #include <linux/security.h> | |
| #include <asm/shmparam.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/io_uring.h> | |
| #include <uapi/linux/io_uring.h> | |
| #include "io-wq.h" | |
| #include "io_uring.h" | |
| #include "opdef.h" | |
| #include "refs.h" | |
| #include "tctx.h" | |
| #include "sqpoll.h" | |
| #include "fdinfo.h" | |
| #include "kbuf.h" | |
| #include "rsrc.h" | |
| #include "cancel.h" | |
| #include "net.h" | |
| #include "notif.h" | |
| #include "timeout.h" | |
| #include "poll.h" | |
| #include "rw.h" | |
| #include "alloc_cache.h" | |
| #define IORING_MAX_ENTRIES 32768 | |
| #define IORING_MAX_CQ_ENTRIES (2 * IORING_MAX_ENTRIES) | |
| #define IORING_MAX_RESTRICTIONS (IORING_RESTRICTION_LAST + \ | |
| IORING_REGISTER_LAST + IORING_OP_LAST) | |
| #define SQE_COMMON_FLAGS (IOSQE_FIXED_FILE | IOSQE_IO_LINK | \ | |
| IOSQE_IO_HARDLINK | IOSQE_ASYNC) | |
| #define SQE_VALID_FLAGS (SQE_COMMON_FLAGS | IOSQE_BUFFER_SELECT | \ | |
| IOSQE_IO_DRAIN | IOSQE_CQE_SKIP_SUCCESS) | |
| #define IO_REQ_CLEAN_FLAGS (REQ_F_BUFFER_SELECTED | REQ_F_NEED_CLEANUP | \ | |
| REQ_F_POLLED | REQ_F_INFLIGHT | REQ_F_CREDS | \ | |
| REQ_F_ASYNC_DATA) | |
| #define IO_REQ_CLEAN_SLOW_FLAGS (REQ_F_REFCOUNT | REQ_F_LINK | REQ_F_HARDLINK |\ | |
| IO_REQ_CLEAN_FLAGS) | |
| #define IO_TCTX_REFS_CACHE_NR (1U << 10) | |
| #define IO_COMPL_BATCH 32 | |
| #define IO_REQ_ALLOC_BATCH 8 | |
| enum { | |
| IO_CHECK_CQ_OVERFLOW_BIT, | |
| IO_CHECK_CQ_DROPPED_BIT, | |
| }; | |
| enum { | |
| IO_EVENTFD_OP_SIGNAL_BIT, | |
| IO_EVENTFD_OP_FREE_BIT, | |
| }; | |
| struct io_defer_entry { | |
| struct list_head list; | |
| struct io_kiocb *req; | |
| u32 seq; | |
| }; | |
| /* requests with any of those set should undergo io_disarm_next() */ | |
| #define IO_DISARM_MASK (REQ_F_ARM_LTIMEOUT | REQ_F_LINK_TIMEOUT | REQ_F_FAIL) | |
| #define IO_REQ_LINK_FLAGS (REQ_F_LINK | REQ_F_HARDLINK) | |
| static bool io_uring_try_cancel_requests(struct io_ring_ctx *ctx, | |
| struct task_struct *task, | |
| bool cancel_all); | |
| static void io_queue_sqe(struct io_kiocb *req); | |
| struct kmem_cache *req_cachep; | |
| static struct workqueue_struct *iou_wq __ro_after_init; | |
| static int __read_mostly sysctl_io_uring_disabled; | |
| static int __read_mostly sysctl_io_uring_group = -1; | |
| #ifdef CONFIG_SYSCTL | |
| static struct ctl_table kernel_io_uring_disabled_table[] = { | |
| { | |
| .procname = "io_uring_disabled", | |
| .data = &sysctl_io_uring_disabled, | |
| .maxlen = sizeof(sysctl_io_uring_disabled), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec_minmax, | |
| .extra1 = SYSCTL_ZERO, | |
| .extra2 = SYSCTL_TWO, | |
| }, | |
| { | |
| .procname = "io_uring_group", | |
| .data = &sysctl_io_uring_group, | |
| .maxlen = sizeof(gid_t), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec, | |
| }, | |
| {}, | |
| }; | |
| #endif | |
| static inline void io_submit_flush_completions(struct io_ring_ctx *ctx) | |
| { | |
| if (!wq_list_empty(&ctx->submit_state.compl_reqs) || | |
| ctx->submit_state.cqes_count) | |
| __io_submit_flush_completions(ctx); | |
| } | |
| static inline unsigned int __io_cqring_events(struct io_ring_ctx *ctx) | |
| { | |
| return ctx->cached_cq_tail - READ_ONCE(ctx->rings->cq.head); | |
| } | |
| static inline unsigned int __io_cqring_events_user(struct io_ring_ctx *ctx) | |
| { | |
| return READ_ONCE(ctx->rings->cq.tail) - READ_ONCE(ctx->rings->cq.head); | |
| } | |
| static bool io_match_linked(struct io_kiocb *head) | |
| { | |
| struct io_kiocb *req; | |
| io_for_each_link(req, head) { | |
| if (req->flags & REQ_F_INFLIGHT) | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * As io_match_task() but protected against racing with linked timeouts. | |
| * User must not hold timeout_lock. | |
| */ | |
| bool io_match_task_safe(struct io_kiocb *head, struct task_struct *task, | |
| bool cancel_all) | |
| { | |
| bool matched; | |
| if (task && head->task != task) | |
| return false; | |
| if (cancel_all) | |
| return true; | |
| if (head->flags & REQ_F_LINK_TIMEOUT) { | |
| struct io_ring_ctx *ctx = head->ctx; | |
| /* protect against races with linked timeouts */ | |
| spin_lock_irq(&ctx->timeout_lock); | |
| matched = io_match_linked(head); | |
| spin_unlock_irq(&ctx->timeout_lock); | |
| } else { | |
| matched = io_match_linked(head); | |
| } | |
| return matched; | |
| } | |
| static inline void req_fail_link_node(struct io_kiocb *req, int res) | |
| { | |
| req_set_fail(req); | |
| io_req_set_res(req, res, 0); | |
| } | |
| static inline void io_req_add_to_cache(struct io_kiocb *req, struct io_ring_ctx *ctx) | |
| { | |
| wq_stack_add_head(&req->comp_list, &ctx->submit_state.free_list); | |
| } | |
| static __cold void io_ring_ctx_ref_free(struct percpu_ref *ref) | |
| { | |
| struct io_ring_ctx *ctx = container_of(ref, struct io_ring_ctx, refs); | |
| complete(&ctx->ref_comp); | |
| } | |
| static __cold void io_fallback_req_func(struct work_struct *work) | |
| { | |
| struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx, | |
| fallback_work.work); | |
| struct llist_node *node = llist_del_all(&ctx->fallback_llist); | |
| struct io_kiocb *req, *tmp; | |
| struct io_tw_state ts = { .locked = true, }; | |
| percpu_ref_get(&ctx->refs); | |
| mutex_lock(&ctx->uring_lock); | |
| llist_for_each_entry_safe(req, tmp, node, io_task_work.node) | |
| req->io_task_work.func(req, &ts); | |
| if (WARN_ON_ONCE(!ts.locked)) | |
| return; | |
| io_submit_flush_completions(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| percpu_ref_put(&ctx->refs); | |
| } | |
| static int io_alloc_hash_table(struct io_hash_table *table, unsigned bits) | |
| { | |
| unsigned hash_buckets = 1U << bits; | |
| size_t hash_size = hash_buckets * sizeof(table->hbs[0]); | |
| table->hbs = kmalloc(hash_size, GFP_KERNEL); | |
| if (!table->hbs) | |
| return -ENOMEM; | |
| table->hash_bits = bits; | |
| init_hash_table(table, hash_buckets); | |
| return 0; | |
| } | |
| static __cold struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p) | |
| { | |
| struct io_ring_ctx *ctx; | |
| int hash_bits; | |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | |
| if (!ctx) | |
| return NULL; | |
| xa_init(&ctx->io_bl_xa); | |
| /* | |
| * Use 5 bits less than the max cq entries, that should give us around | |
| * 32 entries per hash list if totally full and uniformly spread, but | |
| * don't keep too many buckets to not overconsume memory. | |
| */ | |
| hash_bits = ilog2(p->cq_entries) - 5; | |
| hash_bits = clamp(hash_bits, 1, 8); | |
| if (io_alloc_hash_table(&ctx->cancel_table, hash_bits)) | |
| goto err; | |
| if (io_alloc_hash_table(&ctx->cancel_table_locked, hash_bits)) | |
| goto err; | |
| if (percpu_ref_init(&ctx->refs, io_ring_ctx_ref_free, | |
| 0, GFP_KERNEL)) | |
| goto err; | |
| ctx->flags = p->flags; | |
| init_waitqueue_head(&ctx->sqo_sq_wait); | |
| INIT_LIST_HEAD(&ctx->sqd_list); | |
| INIT_LIST_HEAD(&ctx->cq_overflow_list); | |
| INIT_LIST_HEAD(&ctx->io_buffers_cache); | |
| INIT_HLIST_HEAD(&ctx->io_buf_list); | |
| io_alloc_cache_init(&ctx->rsrc_node_cache, IO_NODE_ALLOC_CACHE_MAX, | |
| sizeof(struct io_rsrc_node)); | |
| io_alloc_cache_init(&ctx->apoll_cache, IO_ALLOC_CACHE_MAX, | |
| sizeof(struct async_poll)); | |
| io_alloc_cache_init(&ctx->netmsg_cache, IO_ALLOC_CACHE_MAX, | |
| sizeof(struct io_async_msghdr)); | |
| init_completion(&ctx->ref_comp); | |
| xa_init_flags(&ctx->personalities, XA_FLAGS_ALLOC1); | |
| mutex_init(&ctx->uring_lock); | |
| init_waitqueue_head(&ctx->cq_wait); | |
| init_waitqueue_head(&ctx->poll_wq); | |
| init_waitqueue_head(&ctx->rsrc_quiesce_wq); | |
| spin_lock_init(&ctx->completion_lock); | |
| spin_lock_init(&ctx->timeout_lock); | |
| INIT_WQ_LIST(&ctx->iopoll_list); | |
| INIT_LIST_HEAD(&ctx->io_buffers_pages); | |
| INIT_LIST_HEAD(&ctx->io_buffers_comp); | |
| INIT_LIST_HEAD(&ctx->defer_list); | |
| INIT_LIST_HEAD(&ctx->timeout_list); | |
| INIT_LIST_HEAD(&ctx->ltimeout_list); | |
| INIT_LIST_HEAD(&ctx->rsrc_ref_list); | |
| init_llist_head(&ctx->work_llist); | |
| INIT_LIST_HEAD(&ctx->tctx_list); | |
| ctx->submit_state.free_list.next = NULL; | |
| INIT_WQ_LIST(&ctx->locked_free_list); | |
| INIT_DELAYED_WORK(&ctx->fallback_work, io_fallback_req_func); | |
| INIT_WQ_LIST(&ctx->submit_state.compl_reqs); | |
| return ctx; | |
| err: | |
| kfree(ctx->cancel_table.hbs); | |
| kfree(ctx->cancel_table_locked.hbs); | |
| xa_destroy(&ctx->io_bl_xa); | |
| kfree(ctx); | |
| return NULL; | |
| } | |
| static void io_account_cq_overflow(struct io_ring_ctx *ctx) | |
| { | |
| struct io_rings *r = ctx->rings; | |
| WRITE_ONCE(r->cq_overflow, READ_ONCE(r->cq_overflow) + 1); | |
| ctx->cq_extra--; | |
| } | |
| static bool req_need_defer(struct io_kiocb *req, u32 seq) | |
| { | |
| if (unlikely(req->flags & REQ_F_IO_DRAIN)) { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| return seq + READ_ONCE(ctx->cq_extra) != ctx->cached_cq_tail; | |
| } | |
| return false; | |
| } | |
| static void io_clean_op(struct io_kiocb *req) | |
| { | |
| if (req->flags & REQ_F_BUFFER_SELECTED) { | |
| spin_lock(&req->ctx->completion_lock); | |
| io_put_kbuf_comp(req); | |
| spin_unlock(&req->ctx->completion_lock); | |
| } | |
| if (req->flags & REQ_F_NEED_CLEANUP) { | |
| const struct io_cold_def *def = &io_cold_defs[req->opcode]; | |
| if (def->cleanup) | |
| def->cleanup(req); | |
| } | |
| if ((req->flags & REQ_F_POLLED) && req->apoll) { | |
| kfree(req->apoll->double_poll); | |
| kfree(req->apoll); | |
| req->apoll = NULL; | |
| } | |
| if (req->flags & REQ_F_INFLIGHT) { | |
| struct io_uring_task *tctx = req->task->io_uring; | |
| atomic_dec(&tctx->inflight_tracked); | |
| } | |
| if (req->flags & REQ_F_CREDS) | |
| put_cred(req->creds); | |
| if (req->flags & REQ_F_ASYNC_DATA) { | |
| kfree(req->async_data); | |
| req->async_data = NULL; | |
| } | |
| req->flags &= ~IO_REQ_CLEAN_FLAGS; | |
| } | |
| static inline void io_req_track_inflight(struct io_kiocb *req) | |
| { | |
| if (!(req->flags & REQ_F_INFLIGHT)) { | |
| req->flags |= REQ_F_INFLIGHT; | |
| atomic_inc(&req->task->io_uring->inflight_tracked); | |
| } | |
| } | |
| static struct io_kiocb *__io_prep_linked_timeout(struct io_kiocb *req) | |
| { | |
| if (WARN_ON_ONCE(!req->link)) | |
| return NULL; | |
| req->flags &= ~REQ_F_ARM_LTIMEOUT; | |
| req->flags |= REQ_F_LINK_TIMEOUT; | |
| /* linked timeouts should have two refs once prep'ed */ | |
| io_req_set_refcount(req); | |
| __io_req_set_refcount(req->link, 2); | |
| return req->link; | |
| } | |
| static inline struct io_kiocb *io_prep_linked_timeout(struct io_kiocb *req) | |
| { | |
| if (likely(!(req->flags & REQ_F_ARM_LTIMEOUT))) | |
| return NULL; | |
| return __io_prep_linked_timeout(req); | |
| } | |
| static noinline void __io_arm_ltimeout(struct io_kiocb *req) | |
| { | |
| io_queue_linked_timeout(__io_prep_linked_timeout(req)); | |
| } | |
| static inline void io_arm_ltimeout(struct io_kiocb *req) | |
| { | |
| if (unlikely(req->flags & REQ_F_ARM_LTIMEOUT)) | |
| __io_arm_ltimeout(req); | |
| } | |
| static void io_prep_async_work(struct io_kiocb *req) | |
| { | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| if (!(req->flags & REQ_F_CREDS)) { | |
| req->flags |= REQ_F_CREDS; | |
| req->creds = get_current_cred(); | |
| } | |
| req->work.list.next = NULL; | |
| req->work.flags = 0; | |
| req->work.cancel_seq = atomic_read(&ctx->cancel_seq); | |
| if (req->flags & REQ_F_FORCE_ASYNC) | |
| req->work.flags |= IO_WQ_WORK_CONCURRENT; | |
| if (req->file && !(req->flags & REQ_F_FIXED_FILE)) | |
| req->flags |= io_file_get_flags(req->file); | |
| if (req->file && (req->flags & REQ_F_ISREG)) { | |
| bool should_hash = def->hash_reg_file; | |
| /* don't serialize this request if the fs doesn't need it */ | |
| if (should_hash && (req->file->f_flags & O_DIRECT) && | |
| (req->file->f_mode & FMODE_DIO_PARALLEL_WRITE)) | |
| should_hash = false; | |
| if (should_hash || (ctx->flags & IORING_SETUP_IOPOLL)) | |
| io_wq_hash_work(&req->work, file_inode(req->file)); | |
| } else if (!req->file || !S_ISBLK(file_inode(req->file)->i_mode)) { | |
| if (def->unbound_nonreg_file) | |
| req->work.flags |= IO_WQ_WORK_UNBOUND; | |
| } | |
| } | |
| static void io_prep_async_link(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *cur; | |
| if (req->flags & REQ_F_LINK_TIMEOUT) { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| spin_lock_irq(&ctx->timeout_lock); | |
| io_for_each_link(cur, req) | |
| io_prep_async_work(cur); | |
| spin_unlock_irq(&ctx->timeout_lock); | |
| } else { | |
| io_for_each_link(cur, req) | |
| io_prep_async_work(cur); | |
| } | |
| } | |
| void io_queue_iowq(struct io_kiocb *req, struct io_tw_state *ts_dont_use) | |
| { | |
| struct io_kiocb *link = io_prep_linked_timeout(req); | |
| struct io_uring_task *tctx = req->task->io_uring; | |
| BUG_ON(!tctx); | |
| BUG_ON(!tctx->io_wq); | |
| /* init ->work of the whole link before punting */ | |
| io_prep_async_link(req); | |
| /* | |
| * Not expected to happen, but if we do have a bug where this _can_ | |
| * happen, catch it here and ensure the request is marked as | |
| * canceled. That will make io-wq go through the usual work cancel | |
| * procedure rather than attempt to run this request (or create a new | |
| * worker for it). | |
| */ | |
| if (WARN_ON_ONCE(!same_thread_group(req->task, current))) | |
| req->work.flags |= IO_WQ_WORK_CANCEL; | |
| trace_io_uring_queue_async_work(req, io_wq_is_hashed(&req->work)); | |
| io_wq_enqueue(tctx->io_wq, &req->work); | |
| if (link) | |
| io_queue_linked_timeout(link); | |
| } | |
| static __cold void io_queue_deferred(struct io_ring_ctx *ctx) | |
| { | |
| while (!list_empty(&ctx->defer_list)) { | |
| struct io_defer_entry *de = list_first_entry(&ctx->defer_list, | |
| struct io_defer_entry, list); | |
| if (req_need_defer(de->req, de->seq)) | |
| break; | |
| list_del_init(&de->list); | |
| io_req_task_queue(de->req); | |
| kfree(de); | |
| } | |
| } | |
| static void io_eventfd_ops(struct rcu_head *rcu) | |
| { | |
| struct io_ev_fd *ev_fd = container_of(rcu, struct io_ev_fd, rcu); | |
| int ops = atomic_xchg(&ev_fd->ops, 0); | |
| if (ops & BIT(IO_EVENTFD_OP_SIGNAL_BIT)) | |
| eventfd_signal_mask(ev_fd->cq_ev_fd, 1, EPOLL_URING_WAKE); | |
| /* IO_EVENTFD_OP_FREE_BIT may not be set here depending on callback | |
| * ordering in a race but if references are 0 we know we have to free | |
| * it regardless. | |
| */ | |
| if (atomic_dec_and_test(&ev_fd->refs)) { | |
| eventfd_ctx_put(ev_fd->cq_ev_fd); | |
| kfree(ev_fd); | |
| } | |
| } | |
| static void io_eventfd_signal(struct io_ring_ctx *ctx) | |
| { | |
| struct io_ev_fd *ev_fd = NULL; | |
| rcu_read_lock(); | |
| /* | |
| * rcu_dereference ctx->io_ev_fd once and use it for both for checking | |
| * and eventfd_signal | |
| */ | |
| ev_fd = rcu_dereference(ctx->io_ev_fd); | |
| /* | |
| * Check again if ev_fd exists incase an io_eventfd_unregister call | |
| * completed between the NULL check of ctx->io_ev_fd at the start of | |
| * the function and rcu_read_lock. | |
| */ | |
| if (unlikely(!ev_fd)) | |
| goto out; | |
| if (READ_ONCE(ctx->rings->cq_flags) & IORING_CQ_EVENTFD_DISABLED) | |
| goto out; | |
| if (ev_fd->eventfd_async && !io_wq_current_is_worker()) | |
| goto out; | |
| if (likely(eventfd_signal_allowed())) { | |
| eventfd_signal_mask(ev_fd->cq_ev_fd, 1, EPOLL_URING_WAKE); | |
| } else { | |
| atomic_inc(&ev_fd->refs); | |
| if (!atomic_fetch_or(BIT(IO_EVENTFD_OP_SIGNAL_BIT), &ev_fd->ops)) | |
| call_rcu_hurry(&ev_fd->rcu, io_eventfd_ops); | |
| else | |
| atomic_dec(&ev_fd->refs); | |
| } | |
| out: | |
| rcu_read_unlock(); | |
| } | |
| static void io_eventfd_flush_signal(struct io_ring_ctx *ctx) | |
| { | |
| bool skip; | |
| spin_lock(&ctx->completion_lock); | |
| /* | |
| * Eventfd should only get triggered when at least one event has been | |
| * posted. Some applications rely on the eventfd notification count | |
| * only changing IFF a new CQE has been added to the CQ ring. There's | |
| * no depedency on 1:1 relationship between how many times this | |
| * function is called (and hence the eventfd count) and number of CQEs | |
| * posted to the CQ ring. | |
| */ | |
| skip = ctx->cached_cq_tail == ctx->evfd_last_cq_tail; | |
| ctx->evfd_last_cq_tail = ctx->cached_cq_tail; | |
| spin_unlock(&ctx->completion_lock); | |
| if (skip) | |
| return; | |
| io_eventfd_signal(ctx); | |
| } | |
| void __io_commit_cqring_flush(struct io_ring_ctx *ctx) | |
| { | |
| if (ctx->poll_activated) | |
| io_poll_wq_wake(ctx); | |
| if (ctx->off_timeout_used) | |
| io_flush_timeouts(ctx); | |
| if (ctx->drain_active) { | |
| spin_lock(&ctx->completion_lock); | |
| io_queue_deferred(ctx); | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| if (ctx->has_evfd) | |
| io_eventfd_flush_signal(ctx); | |
| } | |
| static inline void __io_cq_lock(struct io_ring_ctx *ctx) | |
| { | |
| if (!ctx->lockless_cq) | |
| spin_lock(&ctx->completion_lock); | |
| } | |
| static inline void io_cq_lock(struct io_ring_ctx *ctx) | |
| __acquires(ctx->completion_lock) | |
| { | |
| spin_lock(&ctx->completion_lock); | |
| } | |
| static inline void __io_cq_unlock_post(struct io_ring_ctx *ctx) | |
| { | |
| io_commit_cqring(ctx); | |
| if (!ctx->task_complete) { | |
| if (!ctx->lockless_cq) | |
| spin_unlock(&ctx->completion_lock); | |
| /* IOPOLL rings only need to wake up if it's also SQPOLL */ | |
| if (!ctx->syscall_iopoll) | |
| io_cqring_wake(ctx); | |
| } | |
| io_commit_cqring_flush(ctx); | |
| } | |
| static void io_cq_unlock_post(struct io_ring_ctx *ctx) | |
| __releases(ctx->completion_lock) | |
| { | |
| io_commit_cqring(ctx); | |
| spin_unlock(&ctx->completion_lock); | |
| io_cqring_wake(ctx); | |
| io_commit_cqring_flush(ctx); | |
| } | |
| /* Returns true if there are no backlogged entries after the flush */ | |
| static void io_cqring_overflow_kill(struct io_ring_ctx *ctx) | |
| { | |
| struct io_overflow_cqe *ocqe; | |
| LIST_HEAD(list); | |
| spin_lock(&ctx->completion_lock); | |
| list_splice_init(&ctx->cq_overflow_list, &list); | |
| clear_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq); | |
| spin_unlock(&ctx->completion_lock); | |
| while (!list_empty(&list)) { | |
| ocqe = list_first_entry(&list, struct io_overflow_cqe, list); | |
| list_del(&ocqe->list); | |
| kfree(ocqe); | |
| } | |
| } | |
| static void __io_cqring_overflow_flush(struct io_ring_ctx *ctx) | |
| { | |
| size_t cqe_size = sizeof(struct io_uring_cqe); | |
| if (__io_cqring_events(ctx) == ctx->cq_entries) | |
| return; | |
| if (ctx->flags & IORING_SETUP_CQE32) | |
| cqe_size <<= 1; | |
| io_cq_lock(ctx); | |
| while (!list_empty(&ctx->cq_overflow_list)) { | |
| struct io_uring_cqe *cqe; | |
| struct io_overflow_cqe *ocqe; | |
| if (!io_get_cqe_overflow(ctx, &cqe, true)) | |
| break; | |
| ocqe = list_first_entry(&ctx->cq_overflow_list, | |
| struct io_overflow_cqe, list); | |
| memcpy(cqe, &ocqe->cqe, cqe_size); | |
| list_del(&ocqe->list); | |
| kfree(ocqe); | |
| } | |
| if (list_empty(&ctx->cq_overflow_list)) { | |
| clear_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq); | |
| atomic_andnot(IORING_SQ_CQ_OVERFLOW, &ctx->rings->sq_flags); | |
| } | |
| io_cq_unlock_post(ctx); | |
| } | |
| static void io_cqring_do_overflow_flush(struct io_ring_ctx *ctx) | |
| { | |
| /* iopoll syncs against uring_lock, not completion_lock */ | |
| if (ctx->flags & IORING_SETUP_IOPOLL) | |
| mutex_lock(&ctx->uring_lock); | |
| __io_cqring_overflow_flush(ctx); | |
| if (ctx->flags & IORING_SETUP_IOPOLL) | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| static void io_cqring_overflow_flush(struct io_ring_ctx *ctx) | |
| { | |
| if (test_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq)) | |
| io_cqring_do_overflow_flush(ctx); | |
| } | |
| /* can be called by any task */ | |
| static void io_put_task_remote(struct task_struct *task) | |
| { | |
| struct io_uring_task *tctx = task->io_uring; | |
| percpu_counter_sub(&tctx->inflight, 1); | |
| if (unlikely(atomic_read(&tctx->in_cancel))) | |
| wake_up(&tctx->wait); | |
| put_task_struct(task); | |
| } | |
| /* used by a task to put its own references */ | |
| static void io_put_task_local(struct task_struct *task) | |
| { | |
| task->io_uring->cached_refs++; | |
| } | |
| /* must to be called somewhat shortly after putting a request */ | |
| static inline void io_put_task(struct task_struct *task) | |
| { | |
| if (likely(task == current)) | |
| io_put_task_local(task); | |
| else | |
| io_put_task_remote(task); | |
| } | |
| void io_task_refs_refill(struct io_uring_task *tctx) | |
| { | |
| unsigned int refill = -tctx->cached_refs + IO_TCTX_REFS_CACHE_NR; | |
| percpu_counter_add(&tctx->inflight, refill); | |
| refcount_add(refill, ¤t->usage); | |
| tctx->cached_refs += refill; | |
| } | |
| static __cold void io_uring_drop_tctx_refs(struct task_struct *task) | |
| { | |
| struct io_uring_task *tctx = task->io_uring; | |
| unsigned int refs = tctx->cached_refs; | |
| if (refs) { | |
| tctx->cached_refs = 0; | |
| percpu_counter_sub(&tctx->inflight, refs); | |
| put_task_struct_many(task, refs); | |
| } | |
| } | |
| static bool io_cqring_event_overflow(struct io_ring_ctx *ctx, u64 user_data, | |
| s32 res, u32 cflags, u64 extra1, u64 extra2) | |
| { | |
| struct io_overflow_cqe *ocqe; | |
| size_t ocq_size = sizeof(struct io_overflow_cqe); | |
| bool is_cqe32 = (ctx->flags & IORING_SETUP_CQE32); | |
| lockdep_assert_held(&ctx->completion_lock); | |
| if (is_cqe32) | |
| ocq_size += sizeof(struct io_uring_cqe); | |
| ocqe = kmalloc(ocq_size, GFP_ATOMIC | __GFP_ACCOUNT); | |
| trace_io_uring_cqe_overflow(ctx, user_data, res, cflags, ocqe); | |
| if (!ocqe) { | |
| /* | |
| * If we're in ring overflow flush mode, or in task cancel mode, | |
| * or cannot allocate an overflow entry, then we need to drop it | |
| * on the floor. | |
| */ | |
| io_account_cq_overflow(ctx); | |
| set_bit(IO_CHECK_CQ_DROPPED_BIT, &ctx->check_cq); | |
| return false; | |
| } | |
| if (list_empty(&ctx->cq_overflow_list)) { | |
| set_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq); | |
| atomic_or(IORING_SQ_CQ_OVERFLOW, &ctx->rings->sq_flags); | |
| } | |
| ocqe->cqe.user_data = user_data; | |
| ocqe->cqe.res = res; | |
| ocqe->cqe.flags = cflags; | |
| if (is_cqe32) { | |
| ocqe->cqe.big_cqe[0] = extra1; | |
| ocqe->cqe.big_cqe[1] = extra2; | |
| } | |
| list_add_tail(&ocqe->list, &ctx->cq_overflow_list); | |
| return true; | |
| } | |
| void io_req_cqe_overflow(struct io_kiocb *req) | |
| { | |
| io_cqring_event_overflow(req->ctx, req->cqe.user_data, | |
| req->cqe.res, req->cqe.flags, | |
| req->big_cqe.extra1, req->big_cqe.extra2); | |
| memset(&req->big_cqe, 0, sizeof(req->big_cqe)); | |
| } | |
| /* | |
| * writes to the cq entry need to come after reading head; the | |
| * control dependency is enough as we're using WRITE_ONCE to | |
| * fill the cq entry | |
| */ | |
| bool io_cqe_cache_refill(struct io_ring_ctx *ctx, bool overflow) | |
| { | |
| struct io_rings *rings = ctx->rings; | |
| unsigned int off = ctx->cached_cq_tail & (ctx->cq_entries - 1); | |
| unsigned int free, queued, len; | |
| /* | |
| * Posting into the CQ when there are pending overflowed CQEs may break | |
| * ordering guarantees, which will affect links, F_MORE users and more. | |
| * Force overflow the completion. | |
| */ | |
| if (!overflow && (ctx->check_cq & BIT(IO_CHECK_CQ_OVERFLOW_BIT))) | |
| return false; | |
| /* userspace may cheat modifying the tail, be safe and do min */ | |
| queued = min(__io_cqring_events(ctx), ctx->cq_entries); | |
| free = ctx->cq_entries - queued; | |
| /* we need a contiguous range, limit based on the current array offset */ | |
| len = min(free, ctx->cq_entries - off); | |
| if (!len) | |
| return false; | |
| if (ctx->flags & IORING_SETUP_CQE32) { | |
| off <<= 1; | |
| len <<= 1; | |
| } | |
| ctx->cqe_cached = &rings->cqes[off]; | |
| ctx->cqe_sentinel = ctx->cqe_cached + len; | |
| return true; | |
| } | |
| static bool io_fill_cqe_aux(struct io_ring_ctx *ctx, u64 user_data, s32 res, | |
| u32 cflags) | |
| { | |
| struct io_uring_cqe *cqe; | |
| ctx->cq_extra++; | |
| /* | |
| * If we can't get a cq entry, userspace overflowed the | |
| * submission (by quite a lot). Increment the overflow count in | |
| * the ring. | |
| */ | |
| if (likely(io_get_cqe(ctx, &cqe))) { | |
| trace_io_uring_complete(ctx, NULL, user_data, res, cflags, 0, 0); | |
| WRITE_ONCE(cqe->user_data, user_data); | |
| WRITE_ONCE(cqe->res, res); | |
| WRITE_ONCE(cqe->flags, cflags); | |
| if (ctx->flags & IORING_SETUP_CQE32) { | |
| WRITE_ONCE(cqe->big_cqe[0], 0); | |
| WRITE_ONCE(cqe->big_cqe[1], 0); | |
| } | |
| return true; | |
| } | |
| return false; | |
| } | |
| static void __io_flush_post_cqes(struct io_ring_ctx *ctx) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| unsigned int i; | |
| lockdep_assert_held(&ctx->uring_lock); | |
| for (i = 0; i < state->cqes_count; i++) { | |
| struct io_uring_cqe *cqe = &ctx->completion_cqes[i]; | |
| if (!io_fill_cqe_aux(ctx, cqe->user_data, cqe->res, cqe->flags)) { | |
| if (ctx->lockless_cq) { | |
| spin_lock(&ctx->completion_lock); | |
| io_cqring_event_overflow(ctx, cqe->user_data, | |
| cqe->res, cqe->flags, 0, 0); | |
| spin_unlock(&ctx->completion_lock); | |
| } else { | |
| io_cqring_event_overflow(ctx, cqe->user_data, | |
| cqe->res, cqe->flags, 0, 0); | |
| } | |
| } | |
| } | |
| state->cqes_count = 0; | |
| } | |
| static bool __io_post_aux_cqe(struct io_ring_ctx *ctx, u64 user_data, s32 res, u32 cflags, | |
| bool allow_overflow) | |
| { | |
| bool filled; | |
| io_cq_lock(ctx); | |
| filled = io_fill_cqe_aux(ctx, user_data, res, cflags); | |
| if (!filled && allow_overflow) | |
| filled = io_cqring_event_overflow(ctx, user_data, res, cflags, 0, 0); | |
| io_cq_unlock_post(ctx); | |
| return filled; | |
| } | |
| bool io_post_aux_cqe(struct io_ring_ctx *ctx, u64 user_data, s32 res, u32 cflags) | |
| { | |
| return __io_post_aux_cqe(ctx, user_data, res, cflags, true); | |
| } | |
| /* | |
| * A helper for multishot requests posting additional CQEs. | |
| * Should only be used from a task_work including IO_URING_F_MULTISHOT. | |
| */ | |
| bool io_fill_cqe_req_aux(struct io_kiocb *req, bool defer, s32 res, u32 cflags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| u64 user_data = req->cqe.user_data; | |
| struct io_uring_cqe *cqe; | |
| if (!defer) | |
| return __io_post_aux_cqe(ctx, user_data, res, cflags, false); | |
| lockdep_assert_held(&ctx->uring_lock); | |
| if (ctx->submit_state.cqes_count == ARRAY_SIZE(ctx->completion_cqes)) { | |
| __io_cq_lock(ctx); | |
| __io_flush_post_cqes(ctx); | |
| /* no need to flush - flush is deferred */ | |
| __io_cq_unlock_post(ctx); | |
| } | |
| /* For defered completions this is not as strict as it is otherwise, | |
| * however it's main job is to prevent unbounded posted completions, | |
| * and in that it works just as well. | |
| */ | |
| if (test_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq)) | |
| return false; | |
| cqe = &ctx->completion_cqes[ctx->submit_state.cqes_count++]; | |
| cqe->user_data = user_data; | |
| cqe->res = res; | |
| cqe->flags = cflags; | |
| return true; | |
| } | |
| static void __io_req_complete_post(struct io_kiocb *req, unsigned issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_rsrc_node *rsrc_node = NULL; | |
| io_cq_lock(ctx); | |
| if (!(req->flags & REQ_F_CQE_SKIP)) { | |
| if (!io_fill_cqe_req(ctx, req)) | |
| io_req_cqe_overflow(req); | |
| } | |
| /* | |
| * If we're the last reference to this request, add to our locked | |
| * free_list cache. | |
| */ | |
| if (req_ref_put_and_test(req)) { | |
| if (req->flags & IO_REQ_LINK_FLAGS) { | |
| if (req->flags & IO_DISARM_MASK) | |
| io_disarm_next(req); | |
| if (req->link) { | |
| io_req_task_queue(req->link); | |
| req->link = NULL; | |
| } | |
| } | |
| io_put_kbuf_comp(req); | |
| if (unlikely(req->flags & IO_REQ_CLEAN_FLAGS)) | |
| io_clean_op(req); | |
| io_put_file(req); | |
| rsrc_node = req->rsrc_node; | |
| /* | |
| * Selected buffer deallocation in io_clean_op() assumes that | |
| * we don't hold ->completion_lock. Clean them here to avoid | |
| * deadlocks. | |
| */ | |
| io_put_task_remote(req->task); | |
| wq_list_add_head(&req->comp_list, &ctx->locked_free_list); | |
| ctx->locked_free_nr++; | |
| } | |
| io_cq_unlock_post(ctx); | |
| if (rsrc_node) { | |
| io_ring_submit_lock(ctx, issue_flags); | |
| io_put_rsrc_node(ctx, rsrc_node); | |
| io_ring_submit_unlock(ctx, issue_flags); | |
| } | |
| } | |
| void io_req_complete_post(struct io_kiocb *req, unsigned issue_flags) | |
| { | |
| if (req->ctx->task_complete && req->ctx->submitter_task != current) { | |
| req->io_task_work.func = io_req_task_complete; | |
| io_req_task_work_add(req); | |
| } else if (!(issue_flags & IO_URING_F_UNLOCKED) || | |
| !(req->ctx->flags & IORING_SETUP_IOPOLL)) { | |
| __io_req_complete_post(req, issue_flags); | |
| } else { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| mutex_lock(&ctx->uring_lock); | |
| __io_req_complete_post(req, issue_flags & ~IO_URING_F_UNLOCKED); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| } | |
| void io_req_defer_failed(struct io_kiocb *req, s32 res) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| const struct io_cold_def *def = &io_cold_defs[req->opcode]; | |
| lockdep_assert_held(&req->ctx->uring_lock); | |
| req_set_fail(req); | |
| io_req_set_res(req, res, io_put_kbuf(req, IO_URING_F_UNLOCKED)); | |
| if (def->fail) | |
| def->fail(req); | |
| io_req_complete_defer(req); | |
| } | |
| /* | |
| * Don't initialise the fields below on every allocation, but do that in | |
| * advance and keep them valid across allocations. | |
| */ | |
| static void io_preinit_req(struct io_kiocb *req, struct io_ring_ctx *ctx) | |
| { | |
| req->ctx = ctx; | |
| req->link = NULL; | |
| req->async_data = NULL; | |
| /* not necessary, but safer to zero */ | |
| memset(&req->cqe, 0, sizeof(req->cqe)); | |
| memset(&req->big_cqe, 0, sizeof(req->big_cqe)); | |
| } | |
| static void io_flush_cached_locked_reqs(struct io_ring_ctx *ctx, | |
| struct io_submit_state *state) | |
| { | |
| spin_lock(&ctx->completion_lock); | |
| wq_list_splice(&ctx->locked_free_list, &state->free_list); | |
| ctx->locked_free_nr = 0; | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| /* | |
| * A request might get retired back into the request caches even before opcode | |
| * handlers and io_issue_sqe() are done with it, e.g. inline completion path. | |
| * Because of that, io_alloc_req() should be called only under ->uring_lock | |
| * and with extra caution to not get a request that is still worked on. | |
| */ | |
| __cold bool __io_alloc_req_refill(struct io_ring_ctx *ctx) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| gfp_t gfp = GFP_KERNEL | __GFP_NOWARN; | |
| void *reqs[IO_REQ_ALLOC_BATCH]; | |
| int ret, i; | |
| /* | |
| * If we have more than a batch's worth of requests in our IRQ side | |
| * locked cache, grab the lock and move them over to our submission | |
| * side cache. | |
| */ | |
| if (data_race(ctx->locked_free_nr) > IO_COMPL_BATCH) { | |
| io_flush_cached_locked_reqs(ctx, &ctx->submit_state); | |
| if (!io_req_cache_empty(ctx)) | |
| return true; | |
| } | |
| ret = kmem_cache_alloc_bulk(req_cachep, gfp, ARRAY_SIZE(reqs), reqs); | |
| /* | |
| * Bulk alloc is all-or-nothing. If we fail to get a batch, | |
| * retry single alloc to be on the safe side. | |
| */ | |
| if (unlikely(ret <= 0)) { | |
| reqs[0] = kmem_cache_alloc(req_cachep, gfp); | |
| if (!reqs[0]) | |
| return false; | |
| ret = 1; | |
| } | |
| percpu_ref_get_many(&ctx->refs, ret); | |
| for (i = 0; i < ret; i++) { | |
| struct io_kiocb *req = reqs[i]; | |
| io_preinit_req(req, ctx); | |
| io_req_add_to_cache(req, ctx); | |
| } | |
| return true; | |
| } | |
| __cold void io_free_req(struct io_kiocb *req) | |
| { | |
| /* refs were already put, restore them for io_req_task_complete() */ | |
| req->flags &= ~REQ_F_REFCOUNT; | |
| /* we only want to free it, don't post CQEs */ | |
| req->flags |= REQ_F_CQE_SKIP; | |
| req->io_task_work.func = io_req_task_complete; | |
| io_req_task_work_add(req); | |
| } | |
| static void __io_req_find_next_prep(struct io_kiocb *req) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| spin_lock(&ctx->completion_lock); | |
| io_disarm_next(req); | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static inline struct io_kiocb *io_req_find_next(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *nxt; | |
| /* | |
| * If LINK is set, we have dependent requests in this chain. If we | |
| * didn't fail this request, queue the first one up, moving any other | |
| * dependencies to the next request. In case of failure, fail the rest | |
| * of the chain. | |
| */ | |
| if (unlikely(req->flags & IO_DISARM_MASK)) | |
| __io_req_find_next_prep(req); | |
| nxt = req->link; | |
| req->link = NULL; | |
| return nxt; | |
| } | |
| static void ctx_flush_and_put(struct io_ring_ctx *ctx, struct io_tw_state *ts) | |
| { | |
| if (!ctx) | |
| return; | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG) | |
| atomic_andnot(IORING_SQ_TASKRUN, &ctx->rings->sq_flags); | |
| if (ts->locked) { | |
| io_submit_flush_completions(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| ts->locked = false; | |
| } | |
| percpu_ref_put(&ctx->refs); | |
| } | |
| static unsigned int handle_tw_list(struct llist_node *node, | |
| struct io_ring_ctx **ctx, | |
| struct io_tw_state *ts) | |
| { | |
| unsigned int count = 0; | |
| do { | |
| struct llist_node *next = node->next; | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| io_task_work.node); | |
| prefetch(container_of(next, struct io_kiocb, io_task_work.node)); | |
| if (req->ctx != *ctx) { | |
| ctx_flush_and_put(*ctx, ts); | |
| *ctx = req->ctx; | |
| /* if not contended, grab and improve batching */ | |
| ts->locked = mutex_trylock(&(*ctx)->uring_lock); | |
| percpu_ref_get(&(*ctx)->refs); | |
| } | |
| INDIRECT_CALL_2(req->io_task_work.func, | |
| io_poll_task_func, io_req_rw_complete, | |
| req, ts); | |
| node = next; | |
| count++; | |
| if (unlikely(need_resched())) { | |
| ctx_flush_and_put(*ctx, ts); | |
| *ctx = NULL; | |
| cond_resched(); | |
| } | |
| } while (node); | |
| return count; | |
| } | |
| /** | |
| * io_llist_xchg - swap all entries in a lock-less list | |
| * @head: the head of lock-less list to delete all entries | |
| * @new: new entry as the head of the list | |
| * | |
| * If list is empty, return NULL, otherwise, return the pointer to the first entry. | |
| * The order of entries returned is from the newest to the oldest added one. | |
| */ | |
| static inline struct llist_node *io_llist_xchg(struct llist_head *head, | |
| struct llist_node *new) | |
| { | |
| return xchg(&head->first, new); | |
| } | |
| static __cold void io_fallback_tw(struct io_uring_task *tctx, bool sync) | |
| { | |
| struct llist_node *node = llist_del_all(&tctx->task_list); | |
| struct io_ring_ctx *last_ctx = NULL; | |
| struct io_kiocb *req; | |
| while (node) { | |
| req = container_of(node, struct io_kiocb, io_task_work.node); | |
| node = node->next; | |
| if (sync && last_ctx != req->ctx) { | |
| if (last_ctx) { | |
| flush_delayed_work(&last_ctx->fallback_work); | |
| percpu_ref_put(&last_ctx->refs); | |
| } | |
| last_ctx = req->ctx; | |
| percpu_ref_get(&last_ctx->refs); | |
| } | |
| if (llist_add(&req->io_task_work.node, | |
| &req->ctx->fallback_llist)) | |
| schedule_delayed_work(&req->ctx->fallback_work, 1); | |
| } | |
| if (last_ctx) { | |
| flush_delayed_work(&last_ctx->fallback_work); | |
| percpu_ref_put(&last_ctx->refs); | |
| } | |
| } | |
| void tctx_task_work(struct callback_head *cb) | |
| { | |
| struct io_tw_state ts = {}; | |
| struct io_ring_ctx *ctx = NULL; | |
| struct io_uring_task *tctx = container_of(cb, struct io_uring_task, | |
| task_work); | |
| struct llist_node *node; | |
| unsigned int count = 0; | |
| if (unlikely(current->flags & PF_EXITING)) { | |
| io_fallback_tw(tctx, true); | |
| return; | |
| } | |
| node = llist_del_all(&tctx->task_list); | |
| if (node) | |
| count = handle_tw_list(node, &ctx, &ts); | |
| ctx_flush_and_put(ctx, &ts); | |
| /* relaxed read is enough as only the task itself sets ->in_cancel */ | |
| if (unlikely(atomic_read(&tctx->in_cancel))) | |
| io_uring_drop_tctx_refs(current); | |
| trace_io_uring_task_work_run(tctx, count, 1); | |
| } | |
| static inline void io_req_local_work_add(struct io_kiocb *req, unsigned flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| unsigned nr_wait, nr_tw, nr_tw_prev; | |
| struct llist_node *first; | |
| if (req->flags & (REQ_F_LINK | REQ_F_HARDLINK)) | |
| flags &= ~IOU_F_TWQ_LAZY_WAKE; | |
| first = READ_ONCE(ctx->work_llist.first); | |
| do { | |
| nr_tw_prev = 0; | |
| if (first) { | |
| struct io_kiocb *first_req = container_of(first, | |
| struct io_kiocb, | |
| io_task_work.node); | |
| /* | |
| * Might be executed at any moment, rely on | |
| * SLAB_TYPESAFE_BY_RCU to keep it alive. | |
| */ | |
| nr_tw_prev = READ_ONCE(first_req->nr_tw); | |
| } | |
| nr_tw = nr_tw_prev + 1; | |
| /* Large enough to fail the nr_wait comparison below */ | |
| if (!(flags & IOU_F_TWQ_LAZY_WAKE)) | |
| nr_tw = INT_MAX; | |
| req->nr_tw = nr_tw; | |
| req->io_task_work.node.next = first; | |
| } while (!try_cmpxchg(&ctx->work_llist.first, &first, | |
| &req->io_task_work.node)); | |
| if (!first) { | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG) | |
| atomic_or(IORING_SQ_TASKRUN, &ctx->rings->sq_flags); | |
| if (ctx->has_evfd) | |
| io_eventfd_signal(ctx); | |
| } | |
| nr_wait = atomic_read(&ctx->cq_wait_nr); | |
| /* no one is waiting */ | |
| if (!nr_wait) | |
| return; | |
| /* either not enough or the previous add has already woken it up */ | |
| if (nr_wait > nr_tw || nr_tw_prev >= nr_wait) | |
| return; | |
| /* pairs with set_current_state() in io_cqring_wait() */ | |
| smp_mb__after_atomic(); | |
| wake_up_state(ctx->submitter_task, TASK_INTERRUPTIBLE); | |
| } | |
| static void io_req_normal_work_add(struct io_kiocb *req) | |
| { | |
| struct io_uring_task *tctx = req->task->io_uring; | |
| struct io_ring_ctx *ctx = req->ctx; | |
| /* task_work already pending, we're done */ | |
| if (!llist_add(&req->io_task_work.node, &tctx->task_list)) | |
| return; | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG) | |
| atomic_or(IORING_SQ_TASKRUN, &ctx->rings->sq_flags); | |
| if (likely(!task_work_add(req->task, &tctx->task_work, ctx->notify_method))) | |
| return; | |
| io_fallback_tw(tctx, false); | |
| } | |
| void __io_req_task_work_add(struct io_kiocb *req, unsigned flags) | |
| { | |
| if (req->ctx->flags & IORING_SETUP_DEFER_TASKRUN) { | |
| rcu_read_lock(); | |
| io_req_local_work_add(req, flags); | |
| rcu_read_unlock(); | |
| } else { | |
| io_req_normal_work_add(req); | |
| } | |
| } | |
| static void __cold io_move_task_work_from_local(struct io_ring_ctx *ctx) | |
| { | |
| struct llist_node *node; | |
| node = llist_del_all(&ctx->work_llist); | |
| while (node) { | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| io_task_work.node); | |
| node = node->next; | |
| io_req_normal_work_add(req); | |
| } | |
| } | |
| static bool io_run_local_work_continue(struct io_ring_ctx *ctx, int events, | |
| int min_events) | |
| { | |
| if (llist_empty(&ctx->work_llist)) | |
| return false; | |
| if (events < min_events) | |
| return true; | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG) | |
| atomic_or(IORING_SQ_TASKRUN, &ctx->rings->sq_flags); | |
| return false; | |
| } | |
| static int __io_run_local_work(struct io_ring_ctx *ctx, struct io_tw_state *ts, | |
| int min_events) | |
| { | |
| struct llist_node *node; | |
| unsigned int loops = 0; | |
| int ret = 0; | |
| if (WARN_ON_ONCE(ctx->submitter_task != current)) | |
| return -EEXIST; | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG) | |
| atomic_andnot(IORING_SQ_TASKRUN, &ctx->rings->sq_flags); | |
| again: | |
| /* | |
| * llists are in reverse order, flip it back the right way before | |
| * running the pending items. | |
| */ | |
| node = llist_reverse_order(io_llist_xchg(&ctx->work_llist, NULL)); | |
| while (node) { | |
| struct llist_node *next = node->next; | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| io_task_work.node); | |
| prefetch(container_of(next, struct io_kiocb, io_task_work.node)); | |
| INDIRECT_CALL_2(req->io_task_work.func, | |
| io_poll_task_func, io_req_rw_complete, | |
| req, ts); | |
| ret++; | |
| node = next; | |
| } | |
| loops++; | |
| if (io_run_local_work_continue(ctx, ret, min_events)) | |
| goto again; | |
| if (ts->locked) { | |
| io_submit_flush_completions(ctx); | |
| if (io_run_local_work_continue(ctx, ret, min_events)) | |
| goto again; | |
| } | |
| trace_io_uring_local_work_run(ctx, ret, loops); | |
| return ret; | |
| } | |
| static inline int io_run_local_work_locked(struct io_ring_ctx *ctx, | |
| int min_events) | |
| { | |
| struct io_tw_state ts = { .locked = true, }; | |
| int ret; | |
| if (llist_empty(&ctx->work_llist)) | |
| return 0; | |
| ret = __io_run_local_work(ctx, &ts, min_events); | |
| /* shouldn't happen! */ | |
| if (WARN_ON_ONCE(!ts.locked)) | |
| mutex_lock(&ctx->uring_lock); | |
| return ret; | |
| } | |
| static int io_run_local_work(struct io_ring_ctx *ctx, int min_events) | |
| { | |
| struct io_tw_state ts = {}; | |
| int ret; | |
| ts.locked = mutex_trylock(&ctx->uring_lock); | |
| ret = __io_run_local_work(ctx, &ts, min_events); | |
| if (ts.locked) | |
| mutex_unlock(&ctx->uring_lock); | |
| return ret; | |
| } | |
| static void io_req_task_cancel(struct io_kiocb *req, struct io_tw_state *ts) | |
| { | |
| io_tw_lock(req->ctx, ts); | |
| io_req_defer_failed(req, req->cqe.res); | |
| } | |
| void io_req_task_submit(struct io_kiocb *req, struct io_tw_state *ts) | |
| { | |
| io_tw_lock(req->ctx, ts); | |
| /* req->task == current here, checking PF_EXITING is safe */ | |
| if (unlikely(req->task->flags & PF_EXITING)) | |
| io_req_defer_failed(req, -EFAULT); | |
| else if (req->flags & REQ_F_FORCE_ASYNC) | |
| io_queue_iowq(req, ts); | |
| else | |
| io_queue_sqe(req); | |
| } | |
| void io_req_task_queue_fail(struct io_kiocb *req, int ret) | |
| { | |
| io_req_set_res(req, ret, 0); | |
| req->io_task_work.func = io_req_task_cancel; | |
| io_req_task_work_add(req); | |
| } | |
| void io_req_task_queue(struct io_kiocb *req) | |
| { | |
| req->io_task_work.func = io_req_task_submit; | |
| io_req_task_work_add(req); | |
| } | |
| void io_queue_next(struct io_kiocb *req) | |
| { | |
| struct io_kiocb *nxt = io_req_find_next(req); | |
| if (nxt) | |
| io_req_task_queue(nxt); | |
| } | |
| static void io_free_batch_list(struct io_ring_ctx *ctx, | |
| struct io_wq_work_node *node) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| do { | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| comp_list); | |
| if (unlikely(req->flags & IO_REQ_CLEAN_SLOW_FLAGS)) { | |
| if (req->flags & REQ_F_REFCOUNT) { | |
| node = req->comp_list.next; | |
| if (!req_ref_put_and_test(req)) | |
| continue; | |
| } | |
| if ((req->flags & REQ_F_POLLED) && req->apoll) { | |
| struct async_poll *apoll = req->apoll; | |
| if (apoll->double_poll) | |
| kfree(apoll->double_poll); | |
| if (!io_alloc_cache_put(&ctx->apoll_cache, &apoll->cache)) | |
| kfree(apoll); | |
| req->flags &= ~REQ_F_POLLED; | |
| } | |
| if (req->flags & IO_REQ_LINK_FLAGS) | |
| io_queue_next(req); | |
| if (unlikely(req->flags & IO_REQ_CLEAN_FLAGS)) | |
| io_clean_op(req); | |
| } | |
| io_put_file(req); | |
| io_req_put_rsrc_locked(req, ctx); | |
| io_put_task(req->task); | |
| node = req->comp_list.next; | |
| io_req_add_to_cache(req, ctx); | |
| } while (node); | |
| } | |
| void __io_submit_flush_completions(struct io_ring_ctx *ctx) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| struct io_wq_work_node *node; | |
| __io_cq_lock(ctx); | |
| /* must come first to preserve CQE ordering in failure cases */ | |
| if (state->cqes_count) | |
| __io_flush_post_cqes(ctx); | |
| __wq_list_for_each(node, &state->compl_reqs) { | |
| struct io_kiocb *req = container_of(node, struct io_kiocb, | |
| comp_list); | |
| if (!(req->flags & REQ_F_CQE_SKIP) && | |
| unlikely(!io_fill_cqe_req(ctx, req))) { | |
| if (ctx->lockless_cq) { | |
| spin_lock(&ctx->completion_lock); | |
| io_req_cqe_overflow(req); | |
| spin_unlock(&ctx->completion_lock); | |
| } else { | |
| io_req_cqe_overflow(req); | |
| } | |
| } | |
| } | |
| __io_cq_unlock_post(ctx); | |
| if (!wq_list_empty(&ctx->submit_state.compl_reqs)) { | |
| io_free_batch_list(ctx, state->compl_reqs.first); | |
| INIT_WQ_LIST(&state->compl_reqs); | |
| } | |
| } | |
| static unsigned io_cqring_events(struct io_ring_ctx *ctx) | |
| { | |
| /* See comment at the top of this file */ | |
| smp_rmb(); | |
| return __io_cqring_events(ctx); | |
| } | |
| /* | |
| * We can't just wait for polled events to come to us, we have to actively | |
| * find and complete them. | |
| */ | |
| static __cold void io_iopoll_try_reap_events(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->flags & IORING_SETUP_IOPOLL)) | |
| return; | |
| mutex_lock(&ctx->uring_lock); | |
| while (!wq_list_empty(&ctx->iopoll_list)) { | |
| /* let it sleep and repeat later if can't complete a request */ | |
| if (io_do_iopoll(ctx, true) == 0) | |
| break; | |
| /* | |
| * Ensure we allow local-to-the-cpu processing to take place, | |
| * in this case we need to ensure that we reap all events. | |
| * Also let task_work, etc. to progress by releasing the mutex | |
| */ | |
| if (need_resched()) { | |
| mutex_unlock(&ctx->uring_lock); | |
| cond_resched(); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| static int io_iopoll_check(struct io_ring_ctx *ctx, long min) | |
| { | |
| unsigned int nr_events = 0; | |
| unsigned long check_cq; | |
| if (!io_allowed_run_tw(ctx)) | |
| return -EEXIST; | |
| check_cq = READ_ONCE(ctx->check_cq); | |
| if (unlikely(check_cq)) { | |
| if (check_cq & BIT(IO_CHECK_CQ_OVERFLOW_BIT)) | |
| __io_cqring_overflow_flush(ctx); | |
| /* | |
| * Similarly do not spin if we have not informed the user of any | |
| * dropped CQE. | |
| */ | |
| if (check_cq & BIT(IO_CHECK_CQ_DROPPED_BIT)) | |
| return -EBADR; | |
| } | |
| /* | |
| * Don't enter poll loop if we already have events pending. | |
| * If we do, we can potentially be spinning for commands that | |
| * already triggered a CQE (eg in error). | |
| */ | |
| if (io_cqring_events(ctx)) | |
| return 0; | |
| do { | |
| int ret = 0; | |
| /* | |
| * If a submit got punted to a workqueue, we can have the | |
| * application entering polling for a command before it gets | |
| * issued. That app will hold the uring_lock for the duration | |
| * of the poll right here, so we need to take a breather every | |
| * now and then to ensure that the issue has a chance to add | |
| * the poll to the issued list. Otherwise we can spin here | |
| * forever, while the workqueue is stuck trying to acquire the | |
| * very same mutex. | |
| */ | |
| if (wq_list_empty(&ctx->iopoll_list) || | |
| io_task_work_pending(ctx)) { | |
| u32 tail = ctx->cached_cq_tail; | |
| (void) io_run_local_work_locked(ctx, min); | |
| if (task_work_pending(current) || | |
| wq_list_empty(&ctx->iopoll_list)) { | |
| mutex_unlock(&ctx->uring_lock); | |
| io_run_task_work(); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| /* some requests don't go through iopoll_list */ | |
| if (tail != ctx->cached_cq_tail || | |
| wq_list_empty(&ctx->iopoll_list)) | |
| break; | |
| } | |
| ret = io_do_iopoll(ctx, !min); | |
| if (unlikely(ret < 0)) | |
| return ret; | |
| if (task_sigpending(current)) | |
| return -EINTR; | |
| if (need_resched()) | |
| break; | |
| nr_events += ret; | |
| } while (nr_events < min); | |
| return 0; | |
| } | |
| void io_req_task_complete(struct io_kiocb *req, struct io_tw_state *ts) | |
| { | |
| if (ts->locked) | |
| io_req_complete_defer(req); | |
| else | |
| io_req_complete_post(req, IO_URING_F_UNLOCKED); | |
| } | |
| /* | |
| * After the iocb has been issued, it's safe to be found on the poll list. | |
| * Adding the kiocb to the list AFTER submission ensures that we don't | |
| * find it from a io_do_iopoll() thread before the issuer is done | |
| * accessing the kiocb cookie. | |
| */ | |
| static void io_iopoll_req_issued(struct io_kiocb *req, unsigned int issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| const bool needs_lock = issue_flags & IO_URING_F_UNLOCKED; | |
| /* workqueue context doesn't hold uring_lock, grab it now */ | |
| if (unlikely(needs_lock)) | |
| mutex_lock(&ctx->uring_lock); | |
| /* | |
| * Track whether we have multiple files in our lists. This will impact | |
| * how we do polling eventually, not spinning if we're on potentially | |
| * different devices. | |
| */ | |
| if (wq_list_empty(&ctx->iopoll_list)) { | |
| ctx->poll_multi_queue = false; | |
| } else if (!ctx->poll_multi_queue) { | |
| struct io_kiocb *list_req; | |
| list_req = container_of(ctx->iopoll_list.first, struct io_kiocb, | |
| comp_list); | |
| if (list_req->file != req->file) | |
| ctx->poll_multi_queue = true; | |
| } | |
| /* | |
| * For fast devices, IO may have already completed. If it has, add | |
| * it to the front so we find it first. | |
| */ | |
| if (READ_ONCE(req->iopoll_completed)) | |
| wq_list_add_head(&req->comp_list, &ctx->iopoll_list); | |
| else | |
| wq_list_add_tail(&req->comp_list, &ctx->iopoll_list); | |
| if (unlikely(needs_lock)) { | |
| /* | |
| * If IORING_SETUP_SQPOLL is enabled, sqes are either handle | |
| * in sq thread task context or in io worker task context. If | |
| * current task context is sq thread, we don't need to check | |
| * whether should wake up sq thread. | |
| */ | |
| if ((ctx->flags & IORING_SETUP_SQPOLL) && | |
| wq_has_sleeper(&ctx->sq_data->wait)) | |
| wake_up(&ctx->sq_data->wait); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| } | |
| static bool io_bdev_nowait(struct block_device *bdev) | |
| { | |
| return !bdev || bdev_nowait(bdev); | |
| } | |
| /* | |
| * If we tracked the file through the SCM inflight mechanism, we could support | |
| * any file. For now, just ensure that anything potentially problematic is done | |
| * inline. | |
| */ | |
| static bool __io_file_supports_nowait(struct file *file, umode_t mode) | |
| { | |
| if (S_ISBLK(mode)) { | |
| if (IS_ENABLED(CONFIG_BLOCK) && | |
| io_bdev_nowait(I_BDEV(file->f_mapping->host))) | |
| return true; | |
| return false; | |
| } | |
| if (S_ISSOCK(mode)) | |
| return true; | |
| if (S_ISREG(mode)) { | |
| if (IS_ENABLED(CONFIG_BLOCK) && | |
| io_bdev_nowait(file->f_inode->i_sb->s_bdev) && | |
| !io_is_uring_fops(file)) | |
| return true; | |
| return false; | |
| } | |
| /* any ->read/write should understand O_NONBLOCK */ | |
| if (file->f_flags & O_NONBLOCK) | |
| return true; | |
| return file->f_mode & FMODE_NOWAIT; | |
| } | |
| unsigned int io_file_get_flags(struct file *file) | |
| { | |
| umode_t mode = file_inode(file)->i_mode; | |
| unsigned int res = 0; | |
| if (S_ISREG(mode)) | |
| res |= REQ_F_ISREG; | |
| if (__io_file_supports_nowait(file, mode)) | |
| res |= REQ_F_SUPPORT_NOWAIT; | |
| return res; | |
| } | |
| bool io_alloc_async_data(struct io_kiocb *req) | |
| { | |
| WARN_ON_ONCE(!io_cold_defs[req->opcode].async_size); | |
| req->async_data = kmalloc(io_cold_defs[req->opcode].async_size, GFP_KERNEL); | |
| if (req->async_data) { | |
| req->flags |= REQ_F_ASYNC_DATA; | |
| return false; | |
| } | |
| return true; | |
| } | |
| int io_req_prep_async(struct io_kiocb *req) | |
| { | |
| const struct io_cold_def *cdef = &io_cold_defs[req->opcode]; | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| /* assign early for deferred execution for non-fixed file */ | |
| if (def->needs_file && !(req->flags & REQ_F_FIXED_FILE) && !req->file) | |
| req->file = io_file_get_normal(req, req->cqe.fd); | |
| if (!cdef->prep_async) | |
| return 0; | |
| if (WARN_ON_ONCE(req_has_async_data(req))) | |
| return -EFAULT; | |
| if (!def->manual_alloc) { | |
| if (io_alloc_async_data(req)) | |
| return -EAGAIN; | |
| } | |
| return cdef->prep_async(req); | |
| } | |
| static u32 io_get_sequence(struct io_kiocb *req) | |
| { | |
| u32 seq = req->ctx->cached_sq_head; | |
| struct io_kiocb *cur; | |
| /* need original cached_sq_head, but it was increased for each req */ | |
| io_for_each_link(cur, req) | |
| seq--; | |
| return seq; | |
| } | |
| static __cold void io_drain_req(struct io_kiocb *req) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_defer_entry *de; | |
| int ret; | |
| u32 seq = io_get_sequence(req); | |
| /* Still need defer if there is pending req in defer list. */ | |
| spin_lock(&ctx->completion_lock); | |
| if (!req_need_defer(req, seq) && list_empty_careful(&ctx->defer_list)) { | |
| spin_unlock(&ctx->completion_lock); | |
| queue: | |
| ctx->drain_active = false; | |
| io_req_task_queue(req); | |
| return; | |
| } | |
| spin_unlock(&ctx->completion_lock); | |
| io_prep_async_link(req); | |
| de = kmalloc(sizeof(*de), GFP_KERNEL); | |
| if (!de) { | |
| ret = -ENOMEM; | |
| io_req_defer_failed(req, ret); | |
| return; | |
| } | |
| spin_lock(&ctx->completion_lock); | |
| if (!req_need_defer(req, seq) && list_empty(&ctx->defer_list)) { | |
| spin_unlock(&ctx->completion_lock); | |
| kfree(de); | |
| goto queue; | |
| } | |
| trace_io_uring_defer(req); | |
| de->req = req; | |
| de->seq = seq; | |
| list_add_tail(&de->list, &ctx->defer_list); | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static bool io_assign_file(struct io_kiocb *req, const struct io_issue_def *def, | |
| unsigned int issue_flags) | |
| { | |
| if (req->file || !def->needs_file) | |
| return true; | |
| if (req->flags & REQ_F_FIXED_FILE) | |
| req->file = io_file_get_fixed(req, req->cqe.fd, issue_flags); | |
| else | |
| req->file = io_file_get_normal(req, req->cqe.fd); | |
| return !!req->file; | |
| } | |
| static int io_issue_sqe(struct io_kiocb *req, unsigned int issue_flags) | |
| { | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| const struct cred *creds = NULL; | |
| int ret; | |
| if (unlikely(!io_assign_file(req, def, issue_flags))) | |
| return -EBADF; | |
| if (unlikely((req->flags & REQ_F_CREDS) && req->creds != current_cred())) | |
| creds = override_creds(req->creds); | |
| if (!def->audit_skip) | |
| audit_uring_entry(req->opcode); | |
| ret = def->issue(req, issue_flags); | |
| if (!def->audit_skip) | |
| audit_uring_exit(!ret, ret); | |
| if (creds) | |
| revert_creds(creds); | |
| if (ret == IOU_OK) { | |
| if (issue_flags & IO_URING_F_COMPLETE_DEFER) | |
| io_req_complete_defer(req); | |
| else | |
| io_req_complete_post(req, issue_flags); | |
| return 0; | |
| } | |
| if (ret != IOU_ISSUE_SKIP_COMPLETE) | |
| return ret; | |
| /* If the op doesn't have a file, we're not polling for it */ | |
| if ((req->ctx->flags & IORING_SETUP_IOPOLL) && def->iopoll_queue) | |
| io_iopoll_req_issued(req, issue_flags); | |
| return 0; | |
| } | |
| int io_poll_issue(struct io_kiocb *req, struct io_tw_state *ts) | |
| { | |
| io_tw_lock(req->ctx, ts); | |
| return io_issue_sqe(req, IO_URING_F_NONBLOCK|IO_URING_F_MULTISHOT| | |
| IO_URING_F_COMPLETE_DEFER); | |
| } | |
| struct io_wq_work *io_wq_free_work(struct io_wq_work *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| struct io_kiocb *nxt = NULL; | |
| if (req_ref_put_and_test(req)) { | |
| if (req->flags & IO_REQ_LINK_FLAGS) | |
| nxt = io_req_find_next(req); | |
| io_free_req(req); | |
| } | |
| return nxt ? &nxt->work : NULL; | |
| } | |
| void io_wq_submit_work(struct io_wq_work *work) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| const struct io_issue_def *def = &io_issue_defs[req->opcode]; | |
| unsigned int issue_flags = IO_URING_F_UNLOCKED | IO_URING_F_IOWQ; | |
| bool needs_poll = false; | |
| int ret = 0, err = -ECANCELED; | |
| /* one will be dropped by ->io_wq_free_work() after returning to io-wq */ | |
| if (!(req->flags & REQ_F_REFCOUNT)) | |
| __io_req_set_refcount(req, 2); | |
| else | |
| req_ref_get(req); | |
| io_arm_ltimeout(req); | |
| /* either cancelled or io-wq is dying, so don't touch tctx->iowq */ | |
| if (work->flags & IO_WQ_WORK_CANCEL) { | |
| fail: | |
| io_req_task_queue_fail(req, err); | |
| return; | |
| } | |
| if (!io_assign_file(req, def, issue_flags)) { | |
| err = -EBADF; | |
| work->flags |= IO_WQ_WORK_CANCEL; | |
| goto fail; | |
| } | |
| if (req->flags & REQ_F_FORCE_ASYNC) { | |
| bool opcode_poll = def->pollin || def->pollout; | |
| if (opcode_poll && file_can_poll(req->file)) { | |
| needs_poll = true; | |
| issue_flags |= IO_URING_F_NONBLOCK; | |
| } | |
| } | |
| do { | |
| ret = io_issue_sqe(req, issue_flags); | |
| if (ret != -EAGAIN) | |
| break; | |
| /* | |
| * If REQ_F_NOWAIT is set, then don't wait or retry with | |
| * poll. -EAGAIN is final for that case. | |
| */ | |
| if (req->flags & REQ_F_NOWAIT) | |
| break; | |
| /* | |
| * We can get EAGAIN for iopolled IO even though we're | |
| * forcing a sync submission from here, since we can't | |
| * wait for request slots on the block side. | |
| */ | |
| if (!needs_poll) { | |
| if (!(req->ctx->flags & IORING_SETUP_IOPOLL)) | |
| break; | |
| if (io_wq_worker_stopped()) | |
| break; | |
| cond_resched(); | |
| continue; | |
| } | |
| if (io_arm_poll_handler(req, issue_flags) == IO_APOLL_OK) | |
| return; | |
| /* aborted or ready, in either case retry blocking */ | |
| needs_poll = false; | |
| issue_flags &= ~IO_URING_F_NONBLOCK; | |
| } while (1); | |
| /* avoid locking problems by failing it from a clean context */ | |
| if (ret < 0) | |
| io_req_task_queue_fail(req, ret); | |
| } | |
| inline struct file *io_file_get_fixed(struct io_kiocb *req, int fd, | |
| unsigned int issue_flags) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_fixed_file *slot; | |
| struct file *file = NULL; | |
| io_ring_submit_lock(ctx, issue_flags); | |
| if (unlikely((unsigned int)fd >= ctx->nr_user_files)) | |
| goto out; | |
| fd = array_index_nospec(fd, ctx->nr_user_files); | |
| slot = io_fixed_file_slot(&ctx->file_table, fd); | |
| file = io_slot_file(slot); | |
| req->flags |= io_slot_flags(slot); | |
| io_req_set_rsrc_node(req, ctx, 0); | |
| out: | |
| io_ring_submit_unlock(ctx, issue_flags); | |
| return file; | |
| } | |
| struct file *io_file_get_normal(struct io_kiocb *req, int fd) | |
| { | |
| struct file *file = fget(fd); | |
| trace_io_uring_file_get(req, fd); | |
| /* we don't allow fixed io_uring files */ | |
| if (file && io_is_uring_fops(file)) | |
| io_req_track_inflight(req); | |
| return file; | |
| } | |
| static void io_queue_async(struct io_kiocb *req, int ret) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| struct io_kiocb *linked_timeout; | |
| if (ret != -EAGAIN || (req->flags & REQ_F_NOWAIT)) { | |
| io_req_defer_failed(req, ret); | |
| return; | |
| } | |
| linked_timeout = io_prep_linked_timeout(req); | |
| switch (io_arm_poll_handler(req, 0)) { | |
| case IO_APOLL_READY: | |
| io_kbuf_recycle(req, 0); | |
| io_req_task_queue(req); | |
| break; | |
| case IO_APOLL_ABORTED: | |
| io_kbuf_recycle(req, 0); | |
| io_queue_iowq(req, NULL); | |
| break; | |
| case IO_APOLL_OK: | |
| break; | |
| } | |
| if (linked_timeout) | |
| io_queue_linked_timeout(linked_timeout); | |
| } | |
| static inline void io_queue_sqe(struct io_kiocb *req) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| int ret; | |
| ret = io_issue_sqe(req, IO_URING_F_NONBLOCK|IO_URING_F_COMPLETE_DEFER); | |
| /* | |
| * We async punt it if the file wasn't marked NOWAIT, or if the file | |
| * doesn't support non-blocking read/write attempts | |
| */ | |
| if (likely(!ret)) | |
| io_arm_ltimeout(req); | |
| else | |
| io_queue_async(req, ret); | |
| } | |
| static void io_queue_sqe_fallback(struct io_kiocb *req) | |
| __must_hold(&req->ctx->uring_lock) | |
| { | |
| if (unlikely(req->flags & REQ_F_FAIL)) { | |
| /* | |
| * We don't submit, fail them all, for that replace hardlinks | |
| * with normal links. Extra REQ_F_LINK is tolerated. | |
| */ | |
| req->flags &= ~REQ_F_HARDLINK; | |
| req->flags |= REQ_F_LINK; | |
| io_req_defer_failed(req, req->cqe.res); | |
| } else { | |
| int ret = io_req_prep_async(req); | |
| if (unlikely(ret)) { | |
| io_req_defer_failed(req, ret); | |
| return; | |
| } | |
| if (unlikely(req->ctx->drain_active)) | |
| io_drain_req(req); | |
| else | |
| io_queue_iowq(req, NULL); | |
| } | |
| } | |
| /* | |
| * Check SQE restrictions (opcode and flags). | |
| * | |
| * Returns 'true' if SQE is allowed, 'false' otherwise. | |
| */ | |
| static inline bool io_check_restriction(struct io_ring_ctx *ctx, | |
| struct io_kiocb *req, | |
| unsigned int sqe_flags) | |
| { | |
| if (!test_bit(req->opcode, ctx->restrictions.sqe_op)) | |
| return false; | |
| if ((sqe_flags & ctx->restrictions.sqe_flags_required) != | |
| ctx->restrictions.sqe_flags_required) | |
| return false; | |
| if (sqe_flags & ~(ctx->restrictions.sqe_flags_allowed | | |
| ctx->restrictions.sqe_flags_required)) | |
| return false; | |
| return true; | |
| } | |
| static void io_init_req_drain(struct io_kiocb *req) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_kiocb *head = ctx->submit_state.link.head; | |
| ctx->drain_active = true; | |
| if (head) { | |
| /* | |
| * If we need to drain a request in the middle of a link, drain | |
| * the head request and the next request/link after the current | |
| * link. Considering sequential execution of links, | |
| * REQ_F_IO_DRAIN will be maintained for every request of our | |
| * link. | |
| */ | |
| head->flags |= REQ_F_IO_DRAIN | REQ_F_FORCE_ASYNC; | |
| ctx->drain_next = true; | |
| } | |
| } | |
| static __cold int io_init_fail_req(struct io_kiocb *req, int err) | |
| { | |
| /* ensure per-opcode data is cleared if we fail before prep */ | |
| memset(&req->cmd.data, 0, sizeof(req->cmd.data)); | |
| return err; | |
| } | |
| static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| const struct io_issue_def *def; | |
| unsigned int sqe_flags; | |
| int personality; | |
| u8 opcode; | |
| /* req is partially pre-initialised, see io_preinit_req() */ | |
| req->opcode = opcode = READ_ONCE(sqe->opcode); | |
| /* same numerical values with corresponding REQ_F_*, safe to copy */ | |
| req->flags = sqe_flags = READ_ONCE(sqe->flags); | |
| req->cqe.user_data = READ_ONCE(sqe->user_data); | |
| req->file = NULL; | |
| req->rsrc_node = NULL; | |
| req->task = current; | |
| if (unlikely(opcode >= IORING_OP_LAST)) { | |
| req->opcode = 0; | |
| return io_init_fail_req(req, -EINVAL); | |
| } | |
| def = &io_issue_defs[opcode]; | |
| if (unlikely(sqe_flags & ~SQE_COMMON_FLAGS)) { | |
| /* enforce forwards compatibility on users */ | |
| if (sqe_flags & ~SQE_VALID_FLAGS) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (sqe_flags & IOSQE_BUFFER_SELECT) { | |
| if (!def->buffer_select) | |
| return io_init_fail_req(req, -EOPNOTSUPP); | |
| req->buf_index = READ_ONCE(sqe->buf_group); | |
| } | |
| if (sqe_flags & IOSQE_CQE_SKIP_SUCCESS) | |
| ctx->drain_disabled = true; | |
| if (sqe_flags & IOSQE_IO_DRAIN) { | |
| if (ctx->drain_disabled) | |
| return io_init_fail_req(req, -EOPNOTSUPP); | |
| io_init_req_drain(req); | |
| } | |
| } | |
| if (unlikely(ctx->restricted || ctx->drain_active || ctx->drain_next)) { | |
| if (ctx->restricted && !io_check_restriction(ctx, req, sqe_flags)) | |
| return io_init_fail_req(req, -EACCES); | |
| /* knock it to the slow queue path, will be drained there */ | |
| if (ctx->drain_active) | |
| req->flags |= REQ_F_FORCE_ASYNC; | |
| /* if there is no link, we're at "next" request and need to drain */ | |
| if (unlikely(ctx->drain_next) && !ctx->submit_state.link.head) { | |
| ctx->drain_next = false; | |
| ctx->drain_active = true; | |
| req->flags |= REQ_F_IO_DRAIN | REQ_F_FORCE_ASYNC; | |
| } | |
| } | |
| if (!def->ioprio && sqe->ioprio) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (!def->iopoll && (ctx->flags & IORING_SETUP_IOPOLL)) | |
| return io_init_fail_req(req, -EINVAL); | |
| if (def->needs_file) { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| req->cqe.fd = READ_ONCE(sqe->fd); | |
| /* | |
| * Plug now if we have more than 2 IO left after this, and the | |
| * target is potentially a read/write to block based storage. | |
| */ | |
| if (state->need_plug && def->plug) { | |
| state->plug_started = true; | |
| state->need_plug = false; | |
| blk_start_plug_nr_ios(&state->plug, state->submit_nr); | |
| } | |
| } | |
| personality = READ_ONCE(sqe->personality); | |
| if (personality) { | |
| int ret; | |
| req->creds = xa_load(&ctx->personalities, personality); | |
| if (!req->creds) | |
| return io_init_fail_req(req, -EINVAL); | |
| get_cred(req->creds); | |
| ret = security_uring_override_creds(req->creds); | |
| if (ret) { | |
| put_cred(req->creds); | |
| return io_init_fail_req(req, ret); | |
| } | |
| req->flags |= REQ_F_CREDS; | |
| } | |
| return def->prep(req, sqe); | |
| } | |
| static __cold int io_submit_fail_init(const struct io_uring_sqe *sqe, | |
| struct io_kiocb *req, int ret) | |
| { | |
| struct io_ring_ctx *ctx = req->ctx; | |
| struct io_submit_link *link = &ctx->submit_state.link; | |
| struct io_kiocb *head = link->head; | |
| trace_io_uring_req_failed(sqe, req, ret); | |
| /* | |
| * Avoid breaking links in the middle as it renders links with SQPOLL | |
| * unusable. Instead of failing eagerly, continue assembling the link if | |
| * applicable and mark the head with REQ_F_FAIL. The link flushing code | |
| * should find the flag and handle the rest. | |
| */ | |
| req_fail_link_node(req, ret); | |
| if (head && !(head->flags & REQ_F_FAIL)) | |
| req_fail_link_node(head, -ECANCELED); | |
| if (!(req->flags & IO_REQ_LINK_FLAGS)) { | |
| if (head) { | |
| link->last->link = req; | |
| link->head = NULL; | |
| req = head; | |
| } | |
| io_queue_sqe_fallback(req); | |
| return ret; | |
| } | |
| if (head) | |
| link->last->link = req; | |
| else | |
| link->head = req; | |
| link->last = req; | |
| return 0; | |
| } | |
| static inline int io_submit_sqe(struct io_ring_ctx *ctx, struct io_kiocb *req, | |
| const struct io_uring_sqe *sqe) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_submit_link *link = &ctx->submit_state.link; | |
| int ret; | |
| ret = io_init_req(ctx, req, sqe); | |
| if (unlikely(ret)) | |
| return io_submit_fail_init(sqe, req, ret); | |
| trace_io_uring_submit_req(req); | |
| /* | |
| * If we already have a head request, queue this one for async | |
| * submittal once the head completes. If we don't have a head but | |
| * IOSQE_IO_LINK is set in the sqe, start a new head. This one will be | |
| * submitted sync once the chain is complete. If none of those | |
| * conditions are true (normal request), then just queue it. | |
| */ | |
| if (unlikely(link->head)) { | |
| ret = io_req_prep_async(req); | |
| if (unlikely(ret)) | |
| return io_submit_fail_init(sqe, req, ret); | |
| trace_io_uring_link(req, link->head); | |
| link->last->link = req; | |
| link->last = req; | |
| if (req->flags & IO_REQ_LINK_FLAGS) | |
| return 0; | |
| /* last request of the link, flush it */ | |
| req = link->head; | |
| link->head = NULL; | |
| if (req->flags & (REQ_F_FORCE_ASYNC | REQ_F_FAIL)) | |
| goto fallback; | |
| } else if (unlikely(req->flags & (IO_REQ_LINK_FLAGS | | |
| REQ_F_FORCE_ASYNC | REQ_F_FAIL))) { | |
| if (req->flags & IO_REQ_LINK_FLAGS) { | |
| link->head = req; | |
| link->last = req; | |
| } else { | |
| fallback: | |
| io_queue_sqe_fallback(req); | |
| } | |
| return 0; | |
| } | |
| io_queue_sqe(req); | |
| return 0; | |
| } | |
| /* | |
| * Batched submission is done, ensure local IO is flushed out. | |
| */ | |
| static void io_submit_state_end(struct io_ring_ctx *ctx) | |
| { | |
| struct io_submit_state *state = &ctx->submit_state; | |
| if (unlikely(state->link.head)) | |
| io_queue_sqe_fallback(state->link.head); | |
| /* flush only after queuing links as they can generate completions */ | |
| io_submit_flush_completions(ctx); | |
| if (state->plug_started) | |
| blk_finish_plug(&state->plug); | |
| } | |
| /* | |
| * Start submission side cache. | |
| */ | |
| static void io_submit_state_start(struct io_submit_state *state, | |
| unsigned int max_ios) | |
| { | |
| state->plug_started = false; | |
| state->need_plug = max_ios > 2; | |
| state->submit_nr = max_ios; | |
| /* set only head, no need to init link_last in advance */ | |
| state->link.head = NULL; | |
| } | |
| static void io_commit_sqring(struct io_ring_ctx *ctx) | |
| { | |
| struct io_rings *rings = ctx->rings; | |
| /* | |
| * Ensure any loads from the SQEs are done at this point, | |
| * since once we write the new head, the application could | |
| * write new data to them. | |
| */ | |
| smp_store_release(&rings->sq.head, ctx->cached_sq_head); | |
| } | |
| /* | |
| * Fetch an sqe, if one is available. Note this returns a pointer to memory | |
| * that is mapped by userspace. This means that care needs to be taken to | |
| * ensure that reads are stable, as we cannot rely on userspace always | |
| * being a good citizen. If members of the sqe are validated and then later | |
| * used, it's important that those reads are done through READ_ONCE() to | |
| * prevent a re-load down the line. | |
| */ | |
| static bool io_get_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe) | |
| { | |
| unsigned mask = ctx->sq_entries - 1; | |
| unsigned head = ctx->cached_sq_head++ & mask; | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) { | |
| head = READ_ONCE(ctx->sq_array[head]); | |
| if (unlikely(head >= ctx->sq_entries)) { | |
| /* drop invalid entries */ | |
| spin_lock(&ctx->completion_lock); | |
| ctx->cq_extra--; | |
| spin_unlock(&ctx->completion_lock); | |
| WRITE_ONCE(ctx->rings->sq_dropped, | |
| READ_ONCE(ctx->rings->sq_dropped) + 1); | |
| return false; | |
| } | |
| } | |
| /* | |
| * The cached sq head (or cq tail) serves two purposes: | |
| * | |
| * 1) allows us to batch the cost of updating the user visible | |
| * head updates. | |
| * 2) allows the kernel side to track the head on its own, even | |
| * though the application is the one updating it. | |
| */ | |
| /* double index for 128-byte SQEs, twice as long */ | |
| if (ctx->flags & IORING_SETUP_SQE128) | |
| head <<= 1; | |
| *sqe = &ctx->sq_sqes[head]; | |
| return true; | |
| } | |
| int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| unsigned int entries = io_sqring_entries(ctx); | |
| unsigned int left; | |
| int ret; | |
| if (unlikely(!entries)) | |
| return 0; | |
| /* make sure SQ entry isn't read before tail */ | |
| ret = left = min(nr, entries); | |
| io_get_task_refs(left); | |
| io_submit_state_start(&ctx->submit_state, left); | |
| do { | |
| const struct io_uring_sqe *sqe; | |
| struct io_kiocb *req; | |
| if (unlikely(!io_alloc_req(ctx, &req))) | |
| break; | |
| if (unlikely(!io_get_sqe(ctx, &sqe))) { | |
| io_req_add_to_cache(req, ctx); | |
| break; | |
| } | |
| /* | |
| * Continue submitting even for sqe failure if the | |
| * ring was setup with IORING_SETUP_SUBMIT_ALL | |
| */ | |
| if (unlikely(io_submit_sqe(ctx, req, sqe)) && | |
| !(ctx->flags & IORING_SETUP_SUBMIT_ALL)) { | |
| left--; | |
| break; | |
| } | |
| } while (--left); | |
| if (unlikely(left)) { | |
| ret -= left; | |
| /* try again if it submitted nothing and can't allocate a req */ | |
| if (!ret && io_req_cache_empty(ctx)) | |
| ret = -EAGAIN; | |
| current->io_uring->cached_refs += left; | |
| } | |
| io_submit_state_end(ctx); | |
| /* Commit SQ ring head once we've consumed and submitted all SQEs */ | |
| io_commit_sqring(ctx); | |
| return ret; | |
| } | |
| struct io_wait_queue { | |
| struct wait_queue_entry wq; | |
| struct io_ring_ctx *ctx; | |
| unsigned cq_tail; | |
| unsigned nr_timeouts; | |
| ktime_t timeout; | |
| }; | |
| static inline bool io_has_work(struct io_ring_ctx *ctx) | |
| { | |
| return test_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq) || | |
| !llist_empty(&ctx->work_llist); | |
| } | |
| static inline bool io_should_wake(struct io_wait_queue *iowq) | |
| { | |
| struct io_ring_ctx *ctx = iowq->ctx; | |
| int dist = READ_ONCE(ctx->rings->cq.tail) - (int) iowq->cq_tail; | |
| /* | |
| * Wake up if we have enough events, or if a timeout occurred since we | |
| * started waiting. For timeouts, we always want to return to userspace, | |
| * regardless of event count. | |
| */ | |
| return dist >= 0 || atomic_read(&ctx->cq_timeouts) != iowq->nr_timeouts; | |
| } | |
| static int io_wake_function(struct wait_queue_entry *curr, unsigned int mode, | |
| int wake_flags, void *key) | |
| { | |
| struct io_wait_queue *iowq = container_of(curr, struct io_wait_queue, wq); | |
| /* | |
| * Cannot safely flush overflowed CQEs from here, ensure we wake up | |
| * the task, and the next invocation will do it. | |
| */ | |
| if (io_should_wake(iowq) || io_has_work(iowq->ctx)) | |
| return autoremove_wake_function(curr, mode, wake_flags, key); | |
| return -1; | |
| } | |
| int io_run_task_work_sig(struct io_ring_ctx *ctx) | |
| { | |
| if (!llist_empty(&ctx->work_llist)) { | |
| __set_current_state(TASK_RUNNING); | |
| if (io_run_local_work(ctx, INT_MAX) > 0) | |
| return 0; | |
| } | |
| if (io_run_task_work() > 0) | |
| return 0; | |
| if (task_sigpending(current)) | |
| return -EINTR; | |
| return 0; | |
| } | |
| static bool current_pending_io(void) | |
| { | |
| struct io_uring_task *tctx = current->io_uring; | |
| if (!tctx) | |
| return false; | |
| return percpu_counter_read_positive(&tctx->inflight); | |
| } | |
| /* when returns >0, the caller should retry */ | |
| static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx, | |
| struct io_wait_queue *iowq) | |
| { | |
| int ret; | |
| if (unlikely(READ_ONCE(ctx->check_cq))) | |
| return 1; | |
| if (unlikely(!llist_empty(&ctx->work_llist))) | |
| return 1; | |
| if (unlikely(test_thread_flag(TIF_NOTIFY_SIGNAL))) | |
| return 1; | |
| if (unlikely(task_sigpending(current))) | |
| return -EINTR; | |
| if (unlikely(io_should_wake(iowq))) | |
| return 0; | |
| /* | |
| * Mark us as being in io_wait if we have pending requests, so cpufreq | |
| * can take into account that the task is waiting for IO - turns out | |
| * to be important for low QD IO. | |
| */ | |
| if (current_pending_io()) | |
| current->in_iowait = 1; | |
| ret = 0; | |
| if (iowq->timeout == KTIME_MAX) | |
| schedule(); | |
| else if (!schedule_hrtimeout(&iowq->timeout, HRTIMER_MODE_ABS)) | |
| ret = -ETIME; | |
| current->in_iowait = 0; | |
| return ret; | |
| } | |
| /* | |
| * Wait until events become available, if we don't already have some. The | |
| * application must reap them itself, as they reside on the shared cq ring. | |
| */ | |
| static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, | |
| const sigset_t __user *sig, size_t sigsz, | |
| struct __kernel_timespec __user *uts) | |
| { | |
| struct io_wait_queue iowq; | |
| struct io_rings *rings = ctx->rings; | |
| int ret; | |
| if (!io_allowed_run_tw(ctx)) | |
| return -EEXIST; | |
| if (!llist_empty(&ctx->work_llist)) | |
| io_run_local_work(ctx, min_events); | |
| io_run_task_work(); | |
| io_cqring_overflow_flush(ctx); | |
| /* if user messes with these they will just get an early return */ | |
| if (__io_cqring_events_user(ctx) >= min_events) | |
| return 0; | |
| init_waitqueue_func_entry(&iowq.wq, io_wake_function); | |
| iowq.wq.private = current; | |
| INIT_LIST_HEAD(&iowq.wq.entry); | |
| iowq.ctx = ctx; | |
| iowq.nr_timeouts = atomic_read(&ctx->cq_timeouts); | |
| iowq.cq_tail = READ_ONCE(ctx->rings->cq.head) + min_events; | |
| iowq.timeout = KTIME_MAX; | |
| if (uts) { | |
| struct timespec64 ts; | |
| if (get_timespec64(&ts, uts)) | |
| return -EFAULT; | |
| iowq.timeout = ktime_add_ns(timespec64_to_ktime(ts), ktime_get_ns()); | |
| } | |
| if (sig) { | |
| #ifdef CONFIG_COMPAT | |
| if (in_compat_syscall()) | |
| ret = set_compat_user_sigmask((const compat_sigset_t __user *)sig, | |
| sigsz); | |
| else | |
| #endif | |
| ret = set_user_sigmask(sig, sigsz); | |
| if (ret) | |
| return ret; | |
| } | |
| trace_io_uring_cqring_wait(ctx, min_events); | |
| do { | |
| int nr_wait = (int) iowq.cq_tail - READ_ONCE(ctx->rings->cq.tail); | |
| unsigned long check_cq; | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) { | |
| atomic_set(&ctx->cq_wait_nr, nr_wait); | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| } else { | |
| prepare_to_wait_exclusive(&ctx->cq_wait, &iowq.wq, | |
| TASK_INTERRUPTIBLE); | |
| } | |
| ret = io_cqring_wait_schedule(ctx, &iowq); | |
| __set_current_state(TASK_RUNNING); | |
| atomic_set(&ctx->cq_wait_nr, 0); | |
| /* | |
| * Run task_work after scheduling and before io_should_wake(). | |
| * If we got woken because of task_work being processed, run it | |
| * now rather than let the caller do another wait loop. | |
| */ | |
| io_run_task_work(); | |
| if (!llist_empty(&ctx->work_llist)) | |
| io_run_local_work(ctx, nr_wait); | |
| /* | |
| * Non-local task_work will be run on exit to userspace, but | |
| * if we're using DEFER_TASKRUN, then we could have waited | |
| * with a timeout for a number of requests. If the timeout | |
| * hits, we could have some requests ready to process. Ensure | |
| * this break is _after_ we have run task_work, to avoid | |
| * deferring running potentially pending requests until the | |
| * next time we wait for events. | |
| */ | |
| if (ret < 0) | |
| break; | |
| check_cq = READ_ONCE(ctx->check_cq); | |
| if (unlikely(check_cq)) { | |
| /* let the caller flush overflows, retry */ | |
| if (check_cq & BIT(IO_CHECK_CQ_OVERFLOW_BIT)) | |
| io_cqring_do_overflow_flush(ctx); | |
| if (check_cq & BIT(IO_CHECK_CQ_DROPPED_BIT)) { | |
| ret = -EBADR; | |
| break; | |
| } | |
| } | |
| if (io_should_wake(&iowq)) { | |
| ret = 0; | |
| break; | |
| } | |
| cond_resched(); | |
| } while (1); | |
| if (!(ctx->flags & IORING_SETUP_DEFER_TASKRUN)) | |
| finish_wait(&ctx->cq_wait, &iowq.wq); | |
| restore_saved_sigmask_unless(ret == -EINTR); | |
| return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0; | |
| } | |
| void io_mem_free(void *ptr) | |
| { | |
| if (!ptr) | |
| return; | |
| folio_put(virt_to_folio(ptr)); | |
| } | |
| static void io_pages_free(struct page ***pages, int npages) | |
| { | |
| struct page **page_array; | |
| int i; | |
| if (!pages) | |
| return; | |
| page_array = *pages; | |
| if (!page_array) | |
| return; | |
| for (i = 0; i < npages; i++) | |
| unpin_user_page(page_array[i]); | |
| kvfree(page_array); | |
| *pages = NULL; | |
| } | |
| static void *__io_uaddr_map(struct page ***pages, unsigned short *npages, | |
| unsigned long uaddr, size_t size) | |
| { | |
| struct page **page_array; | |
| unsigned int nr_pages; | |
| void *page_addr; | |
| int ret, i, pinned; | |
| *npages = 0; | |
| if (uaddr & (PAGE_SIZE - 1) || !size) | |
| return ERR_PTR(-EINVAL); | |
| nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; | |
| if (nr_pages > USHRT_MAX) | |
| return ERR_PTR(-EINVAL); | |
| page_array = kvmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL); | |
| if (!page_array) | |
| return ERR_PTR(-ENOMEM); | |
| pinned = pin_user_pages_fast(uaddr, nr_pages, FOLL_WRITE | FOLL_LONGTERM, | |
| page_array); | |
| if (pinned != nr_pages) { | |
| ret = (pinned < 0) ? pinned : -EFAULT; | |
| goto free_pages; | |
| } | |
| page_addr = page_address(page_array[0]); | |
| for (i = 0; i < nr_pages; i++) { | |
| ret = -EINVAL; | |
| /* | |
| * Can't support mapping user allocated ring memory on 32-bit | |
| * archs where it could potentially reside in highmem. Just | |
| * fail those with -EINVAL, just like we did on kernels that | |
| * didn't support this feature. | |
| */ | |
| if (PageHighMem(page_array[i])) | |
| goto free_pages; | |
| /* | |
| * No support for discontig pages for now, should either be a | |
| * single normal page, or a huge page. Later on we can add | |
| * support for remapping discontig pages, for now we will | |
| * just fail them with EINVAL. | |
| */ | |
| if (page_address(page_array[i]) != page_addr) | |
| goto free_pages; | |
| page_addr += PAGE_SIZE; | |
| } | |
| *pages = page_array; | |
| *npages = nr_pages; | |
| return page_to_virt(page_array[0]); | |
| free_pages: | |
| io_pages_free(&page_array, pinned > 0 ? pinned : 0); | |
| return ERR_PTR(ret); | |
| } | |
| static void *io_rings_map(struct io_ring_ctx *ctx, unsigned long uaddr, | |
| size_t size) | |
| { | |
| return __io_uaddr_map(&ctx->ring_pages, &ctx->n_ring_pages, uaddr, | |
| size); | |
| } | |
| static void *io_sqes_map(struct io_ring_ctx *ctx, unsigned long uaddr, | |
| size_t size) | |
| { | |
| return __io_uaddr_map(&ctx->sqe_pages, &ctx->n_sqe_pages, uaddr, | |
| size); | |
| } | |
| static void io_rings_free(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->flags & IORING_SETUP_NO_MMAP)) { | |
| io_mem_free(ctx->rings); | |
| io_mem_free(ctx->sq_sqes); | |
| } else { | |
| io_pages_free(&ctx->ring_pages, ctx->n_ring_pages); | |
| ctx->n_ring_pages = 0; | |
| io_pages_free(&ctx->sqe_pages, ctx->n_sqe_pages); | |
| ctx->n_sqe_pages = 0; | |
| } | |
| ctx->rings = NULL; | |
| ctx->sq_sqes = NULL; | |
| } | |
| void *io_mem_alloc(size_t size) | |
| { | |
| gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP; | |
| void *ret; | |
| ret = (void *) __get_free_pages(gfp, get_order(size)); | |
| if (ret) | |
| return ret; | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| static unsigned long rings_size(struct io_ring_ctx *ctx, unsigned int sq_entries, | |
| unsigned int cq_entries, size_t *sq_offset) | |
| { | |
| struct io_rings *rings; | |
| size_t off, sq_array_size; | |
| off = struct_size(rings, cqes, cq_entries); | |
| if (off == SIZE_MAX) | |
| return SIZE_MAX; | |
| if (ctx->flags & IORING_SETUP_CQE32) { | |
| if (check_shl_overflow(off, 1, &off)) | |
| return SIZE_MAX; | |
| } | |
| #ifdef CONFIG_SMP | |
| off = ALIGN(off, SMP_CACHE_BYTES); | |
| if (off == 0) | |
| return SIZE_MAX; | |
| #endif | |
| if (ctx->flags & IORING_SETUP_NO_SQARRAY) { | |
| if (sq_offset) | |
| *sq_offset = SIZE_MAX; | |
| return off; | |
| } | |
| if (sq_offset) | |
| *sq_offset = off; | |
| sq_array_size = array_size(sizeof(u32), sq_entries); | |
| if (sq_array_size == SIZE_MAX) | |
| return SIZE_MAX; | |
| if (check_add_overflow(off, sq_array_size, &off)) | |
| return SIZE_MAX; | |
| return off; | |
| } | |
| static int io_eventfd_register(struct io_ring_ctx *ctx, void __user *arg, | |
| unsigned int eventfd_async) | |
| { | |
| struct io_ev_fd *ev_fd; | |
| __s32 __user *fds = arg; | |
| int fd; | |
| ev_fd = rcu_dereference_protected(ctx->io_ev_fd, | |
| lockdep_is_held(&ctx->uring_lock)); | |
| if (ev_fd) | |
| return -EBUSY; | |
| if (copy_from_user(&fd, fds, sizeof(*fds))) | |
| return -EFAULT; | |
| ev_fd = kmalloc(sizeof(*ev_fd), GFP_KERNEL); | |
| if (!ev_fd) | |
| return -ENOMEM; | |
| ev_fd->cq_ev_fd = eventfd_ctx_fdget(fd); | |
| if (IS_ERR(ev_fd->cq_ev_fd)) { | |
| int ret = PTR_ERR(ev_fd->cq_ev_fd); | |
| kfree(ev_fd); | |
| return ret; | |
| } | |
| spin_lock(&ctx->completion_lock); | |
| ctx->evfd_last_cq_tail = ctx->cached_cq_tail; | |
| spin_unlock(&ctx->completion_lock); | |
| ev_fd->eventfd_async = eventfd_async; | |
| ctx->has_evfd = true; | |
| rcu_assign_pointer(ctx->io_ev_fd, ev_fd); | |
| atomic_set(&ev_fd->refs, 1); | |
| atomic_set(&ev_fd->ops, 0); | |
| return 0; | |
| } | |
| static int io_eventfd_unregister(struct io_ring_ctx *ctx) | |
| { | |
| struct io_ev_fd *ev_fd; | |
| ev_fd = rcu_dereference_protected(ctx->io_ev_fd, | |
| lockdep_is_held(&ctx->uring_lock)); | |
| if (ev_fd) { | |
| ctx->has_evfd = false; | |
| rcu_assign_pointer(ctx->io_ev_fd, NULL); | |
| if (!atomic_fetch_or(BIT(IO_EVENTFD_OP_FREE_BIT), &ev_fd->ops)) | |
| call_rcu(&ev_fd->rcu, io_eventfd_ops); | |
| return 0; | |
| } | |
| return -ENXIO; | |
| } | |
| static void io_req_caches_free(struct io_ring_ctx *ctx) | |
| { | |
| struct io_kiocb *req; | |
| int nr = 0; | |
| mutex_lock(&ctx->uring_lock); | |
| io_flush_cached_locked_reqs(ctx, &ctx->submit_state); | |
| while (!io_req_cache_empty(ctx)) { | |
| req = io_extract_req(ctx); | |
| kmem_cache_free(req_cachep, req); | |
| nr++; | |
| } | |
| if (nr) | |
| percpu_ref_put_many(&ctx->refs, nr); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| static void io_rsrc_node_cache_free(struct io_cache_entry *entry) | |
| { | |
| kfree(container_of(entry, struct io_rsrc_node, cache)); | |
| } | |
| static __cold void io_ring_ctx_free(struct io_ring_ctx *ctx) | |
| { | |
| io_sq_thread_finish(ctx); | |
| /* __io_rsrc_put_work() may need uring_lock to progress, wait w/o it */ | |
| if (WARN_ON_ONCE(!list_empty(&ctx->rsrc_ref_list))) | |
| return; | |
| mutex_lock(&ctx->uring_lock); | |
| if (ctx->buf_data) | |
| __io_sqe_buffers_unregister(ctx); | |
| if (ctx->file_data) | |
| __io_sqe_files_unregister(ctx); | |
| io_cqring_overflow_kill(ctx); | |
| io_eventfd_unregister(ctx); | |
| io_alloc_cache_free(&ctx->apoll_cache, io_apoll_cache_free); | |
| io_alloc_cache_free(&ctx->netmsg_cache, io_netmsg_cache_free); | |
| io_destroy_buffers(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| if (ctx->sq_creds) | |
| put_cred(ctx->sq_creds); | |
| if (ctx->submitter_task) | |
| put_task_struct(ctx->submitter_task); | |
| /* there are no registered resources left, nobody uses it */ | |
| if (ctx->rsrc_node) | |
| io_rsrc_node_destroy(ctx, ctx->rsrc_node); | |
| WARN_ON_ONCE(!list_empty(&ctx->rsrc_ref_list)); | |
| WARN_ON_ONCE(!list_empty(&ctx->ltimeout_list)); | |
| io_alloc_cache_free(&ctx->rsrc_node_cache, io_rsrc_node_cache_free); | |
| if (ctx->mm_account) { | |
| mmdrop(ctx->mm_account); | |
| ctx->mm_account = NULL; | |
| } | |
| io_rings_free(ctx); | |
| io_kbuf_mmap_list_free(ctx); | |
| percpu_ref_exit(&ctx->refs); | |
| free_uid(ctx->user); | |
| io_req_caches_free(ctx); | |
| if (ctx->hash_map) | |
| io_wq_put_hash(ctx->hash_map); | |
| kfree(ctx->cancel_table.hbs); | |
| kfree(ctx->cancel_table_locked.hbs); | |
| xa_destroy(&ctx->io_bl_xa); | |
| kfree(ctx); | |
| } | |
| static __cold void io_activate_pollwq_cb(struct callback_head *cb) | |
| { | |
| struct io_ring_ctx *ctx = container_of(cb, struct io_ring_ctx, | |
| poll_wq_task_work); | |
| mutex_lock(&ctx->uring_lock); | |
| ctx->poll_activated = true; | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * Wake ups for some events between start of polling and activation | |
| * might've been lost due to loose synchronisation. | |
| */ | |
| wake_up_all(&ctx->poll_wq); | |
| percpu_ref_put(&ctx->refs); | |
| } | |
| static __cold void io_activate_pollwq(struct io_ring_ctx *ctx) | |
| { | |
| spin_lock(&ctx->completion_lock); | |
| /* already activated or in progress */ | |
| if (ctx->poll_activated || ctx->poll_wq_task_work.func) | |
| goto out; | |
| if (WARN_ON_ONCE(!ctx->task_complete)) | |
| goto out; | |
| if (!ctx->submitter_task) | |
| goto out; | |
| /* | |
| * with ->submitter_task only the submitter task completes requests, we | |
| * only need to sync with it, which is done by injecting a tw | |
| */ | |
| init_task_work(&ctx->poll_wq_task_work, io_activate_pollwq_cb); | |
| percpu_ref_get(&ctx->refs); | |
| if (task_work_add(ctx->submitter_task, &ctx->poll_wq_task_work, TWA_SIGNAL)) | |
| percpu_ref_put(&ctx->refs); | |
| out: | |
| spin_unlock(&ctx->completion_lock); | |
| } | |
| static __poll_t io_uring_poll(struct file *file, poll_table *wait) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| __poll_t mask = 0; | |
| if (unlikely(!ctx->poll_activated)) | |
| io_activate_pollwq(ctx); | |
| poll_wait(file, &ctx->poll_wq, wait); | |
| /* | |
| * synchronizes with barrier from wq_has_sleeper call in | |
| * io_commit_cqring | |
| */ | |
| smp_rmb(); | |
| if (!io_sqring_full(ctx)) | |
| mask |= EPOLLOUT | EPOLLWRNORM; | |
| /* | |
| * Don't flush cqring overflow list here, just do a simple check. | |
| * Otherwise there could possible be ABBA deadlock: | |
| * CPU0 CPU1 | |
| * ---- ---- | |
| * lock(&ctx->uring_lock); | |
| * lock(&ep->mtx); | |
| * lock(&ctx->uring_lock); | |
| * lock(&ep->mtx); | |
| * | |
| * Users may get EPOLLIN meanwhile seeing nothing in cqring, this | |
| * pushes them to do the flush. | |
| */ | |
| if (__io_cqring_events_user(ctx) || io_has_work(ctx)) | |
| mask |= EPOLLIN | EPOLLRDNORM; | |
| return mask; | |
| } | |
| static int io_unregister_personality(struct io_ring_ctx *ctx, unsigned id) | |
| { | |
| const struct cred *creds; | |
| creds = xa_erase(&ctx->personalities, id); | |
| if (creds) { | |
| put_cred(creds); | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| struct io_tctx_exit { | |
| struct callback_head task_work; | |
| struct completion completion; | |
| struct io_ring_ctx *ctx; | |
| }; | |
| static __cold void io_tctx_exit_cb(struct callback_head *cb) | |
| { | |
| struct io_uring_task *tctx = current->io_uring; | |
| struct io_tctx_exit *work; | |
| work = container_of(cb, struct io_tctx_exit, task_work); | |
| /* | |
| * When @in_cancel, we're in cancellation and it's racy to remove the | |
| * node. It'll be removed by the end of cancellation, just ignore it. | |
| * tctx can be NULL if the queueing of this task_work raced with | |
| * work cancelation off the exec path. | |
| */ | |
| if (tctx && !atomic_read(&tctx->in_cancel)) | |
| io_uring_del_tctx_node((unsigned long)work->ctx); | |
| complete(&work->completion); | |
| } | |
| static __cold bool io_cancel_ctx_cb(struct io_wq_work *work, void *data) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| return req->ctx == data; | |
| } | |
| static __cold void io_ring_exit_work(struct work_struct *work) | |
| { | |
| struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx, exit_work); | |
| unsigned long timeout = jiffies + HZ * 60 * 5; | |
| unsigned long interval = HZ / 20; | |
| struct io_tctx_exit exit; | |
| struct io_tctx_node *node; | |
| int ret; | |
| /* | |
| * If we're doing polled IO and end up having requests being | |
| * submitted async (out-of-line), then completions can come in while | |
| * we're waiting for refs to drop. We need to reap these manually, | |
| * as nobody else will be looking for them. | |
| */ | |
| do { | |
| if (test_bit(IO_CHECK_CQ_OVERFLOW_BIT, &ctx->check_cq)) { | |
| mutex_lock(&ctx->uring_lock); | |
| io_cqring_overflow_kill(ctx); | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| io_move_task_work_from_local(ctx); | |
| while (io_uring_try_cancel_requests(ctx, NULL, true)) | |
| cond_resched(); | |
| if (ctx->sq_data) { | |
| struct io_sq_data *sqd = ctx->sq_data; | |
| struct task_struct *tsk; | |
| io_sq_thread_park(sqd); | |
| tsk = sqd->thread; | |
| if (tsk && tsk->io_uring && tsk->io_uring->io_wq) | |
| io_wq_cancel_cb(tsk->io_uring->io_wq, | |
| io_cancel_ctx_cb, ctx, true); | |
| io_sq_thread_unpark(sqd); | |
| } | |
| io_req_caches_free(ctx); | |
| if (WARN_ON_ONCE(time_after(jiffies, timeout))) { | |
| /* there is little hope left, don't run it too often */ | |
| interval = HZ * 60; | |
| } | |
| /* | |
| * This is really an uninterruptible wait, as it has to be | |
| * complete. But it's also run from a kworker, which doesn't | |
| * take signals, so it's fine to make it interruptible. This | |
| * avoids scenarios where we knowingly can wait much longer | |
| * on completions, for example if someone does a SIGSTOP on | |
| * a task that needs to finish task_work to make this loop | |
| * complete. That's a synthetic situation that should not | |
| * cause a stuck task backtrace, and hence a potential panic | |
| * on stuck tasks if that is enabled. | |
| */ | |
| } while (!wait_for_completion_interruptible_timeout(&ctx->ref_comp, interval)); | |
| init_completion(&exit.completion); | |
| init_task_work(&exit.task_work, io_tctx_exit_cb); | |
| exit.ctx = ctx; | |
| mutex_lock(&ctx->uring_lock); | |
| while (!list_empty(&ctx->tctx_list)) { | |
| WARN_ON_ONCE(time_after(jiffies, timeout)); | |
| node = list_first_entry(&ctx->tctx_list, struct io_tctx_node, | |
| ctx_node); | |
| /* don't spin on a single task if cancellation failed */ | |
| list_rotate_left(&ctx->tctx_list); | |
| ret = task_work_add(node->task, &exit.task_work, TWA_SIGNAL); | |
| if (WARN_ON_ONCE(ret)) | |
| continue; | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * See comment above for | |
| * wait_for_completion_interruptible_timeout() on why this | |
| * wait is marked as interruptible. | |
| */ | |
| wait_for_completion_interruptible(&exit.completion); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| spin_lock(&ctx->completion_lock); | |
| spin_unlock(&ctx->completion_lock); | |
| /* pairs with RCU read section in io_req_local_work_add() */ | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| synchronize_rcu(); | |
| io_ring_ctx_free(ctx); | |
| } | |
| static __cold void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx) | |
| { | |
| unsigned long index; | |
| struct creds *creds; | |
| mutex_lock(&ctx->uring_lock); | |
| percpu_ref_kill(&ctx->refs); | |
| xa_for_each(&ctx->personalities, index, creds) | |
| io_unregister_personality(ctx, index); | |
| if (ctx->rings) | |
| io_poll_remove_all(ctx, NULL, true); | |
| mutex_unlock(&ctx->uring_lock); | |
| /* | |
| * If we failed setting up the ctx, we might not have any rings | |
| * and therefore did not submit any requests | |
| */ | |
| if (ctx->rings) | |
| io_kill_timeouts(ctx, NULL, true); | |
| flush_delayed_work(&ctx->fallback_work); | |
| INIT_WORK(&ctx->exit_work, io_ring_exit_work); | |
| /* | |
| * Use system_unbound_wq to avoid spawning tons of event kworkers | |
| * if we're exiting a ton of rings at the same time. It just adds | |
| * noise and overhead, there's no discernable change in runtime | |
| * over using system_wq. | |
| */ | |
| queue_work(iou_wq, &ctx->exit_work); | |
| } | |
| static int io_uring_release(struct inode *inode, struct file *file) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| file->private_data = NULL; | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return 0; | |
| } | |
| struct io_task_cancel { | |
| struct task_struct *task; | |
| bool all; | |
| }; | |
| static bool io_cancel_task_cb(struct io_wq_work *work, void *data) | |
| { | |
| struct io_kiocb *req = container_of(work, struct io_kiocb, work); | |
| struct io_task_cancel *cancel = data; | |
| return io_match_task_safe(req, cancel->task, cancel->all); | |
| } | |
| static __cold bool io_cancel_defer_files(struct io_ring_ctx *ctx, | |
| struct task_struct *task, | |
| bool cancel_all) | |
| { | |
| struct io_defer_entry *de; | |
| LIST_HEAD(list); | |
| spin_lock(&ctx->completion_lock); | |
| list_for_each_entry_reverse(de, &ctx->defer_list, list) { | |
| if (io_match_task_safe(de->req, task, cancel_all)) { | |
| list_cut_position(&list, &ctx->defer_list, &de->list); | |
| break; | |
| } | |
| } | |
| spin_unlock(&ctx->completion_lock); | |
| if (list_empty(&list)) | |
| return false; | |
| while (!list_empty(&list)) { | |
| de = list_first_entry(&list, struct io_defer_entry, list); | |
| list_del_init(&de->list); | |
| io_req_task_queue_fail(de->req, -ECANCELED); | |
| kfree(de); | |
| } | |
| return true; | |
| } | |
| static __cold bool io_uring_try_cancel_iowq(struct io_ring_ctx *ctx) | |
| { | |
| struct io_tctx_node *node; | |
| enum io_wq_cancel cret; | |
| bool ret = false; | |
| mutex_lock(&ctx->uring_lock); | |
| list_for_each_entry(node, &ctx->tctx_list, ctx_node) { | |
| struct io_uring_task *tctx = node->task->io_uring; | |
| /* | |
| * io_wq will stay alive while we hold uring_lock, because it's | |
| * killed after ctx nodes, which requires to take the lock. | |
| */ | |
| if (!tctx || !tctx->io_wq) | |
| continue; | |
| cret = io_wq_cancel_cb(tctx->io_wq, io_cancel_ctx_cb, ctx, true); | |
| ret |= (cret != IO_WQ_CANCEL_NOTFOUND); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| return ret; | |
| } | |
| static __cold bool io_uring_try_cancel_requests(struct io_ring_ctx *ctx, | |
| struct task_struct *task, | |
| bool cancel_all) | |
| { | |
| struct io_task_cancel cancel = { .task = task, .all = cancel_all, }; | |
| struct io_uring_task *tctx = task ? task->io_uring : NULL; | |
| enum io_wq_cancel cret; | |
| bool ret = false; | |
| /* set it so io_req_local_work_add() would wake us up */ | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) { | |
| atomic_set(&ctx->cq_wait_nr, 1); | |
| smp_mb(); | |
| } | |
| /* failed during ring init, it couldn't have issued any requests */ | |
| if (!ctx->rings) | |
| return false; | |
| if (!task) { | |
| ret |= io_uring_try_cancel_iowq(ctx); | |
| } else if (tctx && tctx->io_wq) { | |
| /* | |
| * Cancels requests of all rings, not only @ctx, but | |
| * it's fine as the task is in exit/exec. | |
| */ | |
| cret = io_wq_cancel_cb(tctx->io_wq, io_cancel_task_cb, | |
| &cancel, true); | |
| ret |= (cret != IO_WQ_CANCEL_NOTFOUND); | |
| } | |
| /* SQPOLL thread does its own polling */ | |
| if ((!(ctx->flags & IORING_SETUP_SQPOLL) && cancel_all) || | |
| (ctx->sq_data && ctx->sq_data->thread == current)) { | |
| while (!wq_list_empty(&ctx->iopoll_list)) { | |
| io_iopoll_try_reap_events(ctx); | |
| ret = true; | |
| cond_resched(); | |
| } | |
| } | |
| if ((ctx->flags & IORING_SETUP_DEFER_TASKRUN) && | |
| io_allowed_defer_tw_run(ctx)) | |
| ret |= io_run_local_work(ctx, INT_MAX) > 0; | |
| ret |= io_cancel_defer_files(ctx, task, cancel_all); | |
| mutex_lock(&ctx->uring_lock); | |
| ret |= io_poll_remove_all(ctx, task, cancel_all); | |
| mutex_unlock(&ctx->uring_lock); | |
| ret |= io_kill_timeouts(ctx, task, cancel_all); | |
| if (task) | |
| ret |= io_run_task_work() > 0; | |
| return ret; | |
| } | |
| static s64 tctx_inflight(struct io_uring_task *tctx, bool tracked) | |
| { | |
| if (tracked) | |
| return atomic_read(&tctx->inflight_tracked); | |
| return percpu_counter_sum(&tctx->inflight); | |
| } | |
| /* | |
| * Find any io_uring ctx that this task has registered or done IO on, and cancel | |
| * requests. @sqd should be not-null IFF it's an SQPOLL thread cancellation. | |
| */ | |
| __cold void io_uring_cancel_generic(bool cancel_all, struct io_sq_data *sqd) | |
| { | |
| struct io_uring_task *tctx = current->io_uring; | |
| struct io_ring_ctx *ctx; | |
| struct io_tctx_node *node; | |
| unsigned long index; | |
| s64 inflight; | |
| DEFINE_WAIT(wait); | |
| WARN_ON_ONCE(sqd && sqd->thread != current); | |
| if (!current->io_uring) | |
| return; | |
| if (tctx->io_wq) | |
| io_wq_exit_start(tctx->io_wq); | |
| atomic_inc(&tctx->in_cancel); | |
| do { | |
| bool loop = false; | |
| io_uring_drop_tctx_refs(current); | |
| /* read completions before cancelations */ | |
| inflight = tctx_inflight(tctx, !cancel_all); | |
| if (!inflight) | |
| break; | |
| if (!sqd) { | |
| xa_for_each(&tctx->xa, index, node) { | |
| /* sqpoll task will cancel all its requests */ | |
| if (node->ctx->sq_data) | |
| continue; | |
| loop |= io_uring_try_cancel_requests(node->ctx, | |
| current, cancel_all); | |
| } | |
| } else { | |
| list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) | |
| loop |= io_uring_try_cancel_requests(ctx, | |
| current, | |
| cancel_all); | |
| } | |
| if (loop) { | |
| cond_resched(); | |
| continue; | |
| } | |
| prepare_to_wait(&tctx->wait, &wait, TASK_INTERRUPTIBLE); | |
| io_run_task_work(); | |
| io_uring_drop_tctx_refs(current); | |
| xa_for_each(&tctx->xa, index, node) { | |
| if (!llist_empty(&node->ctx->work_llist)) { | |
| WARN_ON_ONCE(node->ctx->submitter_task && | |
| node->ctx->submitter_task != current); | |
| goto end_wait; | |
| } | |
| } | |
| /* | |
| * If we've seen completions, retry without waiting. This | |
| * avoids a race where a completion comes in before we did | |
| * prepare_to_wait(). | |
| */ | |
| if (inflight == tctx_inflight(tctx, !cancel_all)) | |
| schedule(); | |
| end_wait: | |
| finish_wait(&tctx->wait, &wait); | |
| } while (1); | |
| io_uring_clean_tctx(tctx); | |
| if (cancel_all) { | |
| /* | |
| * We shouldn't run task_works after cancel, so just leave | |
| * ->in_cancel set for normal exit. | |
| */ | |
| atomic_dec(&tctx->in_cancel); | |
| /* for exec all current's requests should be gone, kill tctx */ | |
| __io_uring_free(current); | |
| } | |
| } | |
| void __io_uring_cancel(bool cancel_all) | |
| { | |
| io_uring_cancel_generic(cancel_all, NULL); | |
| } | |
| static void *io_uring_validate_mmap_request(struct file *file, | |
| loff_t pgoff, size_t sz) | |
| { | |
| struct io_ring_ctx *ctx = file->private_data; | |
| loff_t offset = pgoff << PAGE_SHIFT; | |
| struct page *page; | |
| void *ptr; | |
| switch (offset & IORING_OFF_MMAP_MASK) { | |
| case IORING_OFF_SQ_RING: | |
| case IORING_OFF_CQ_RING: | |
| /* Don't allow mmap if the ring was setup without it */ | |
| if (ctx->flags & IORING_SETUP_NO_MMAP) | |
| return ERR_PTR(-EINVAL); | |
| ptr = ctx->rings; | |
| break; | |
| case IORING_OFF_SQES: | |
| /* Don't allow mmap if the ring was setup without it */ | |
| if (ctx->flags & IORING_SETUP_NO_MMAP) | |
| return ERR_PTR(-EINVAL); | |
| ptr = ctx->sq_sqes; | |
| break; | |
| case IORING_OFF_PBUF_RING: { | |
| struct io_buffer_list *bl; | |
| unsigned int bgid; | |
| bgid = (offset & ~IORING_OFF_MMAP_MASK) >> IORING_OFF_PBUF_SHIFT; | |
| bl = io_pbuf_get_bl(ctx, bgid); | |
| if (IS_ERR(bl)) | |
| return bl; | |
| ptr = bl->buf_ring; | |
| io_put_bl(ctx, bl); | |
| break; | |
| } | |
| default: | |
| return ERR_PTR(-EINVAL); | |
| } | |
| page = virt_to_head_page(ptr); | |
| if (sz > page_size(page)) | |
| return ERR_PTR(-EINVAL); | |
| return ptr; | |
| } | |
| #ifdef CONFIG_MMU | |
| static __cold int io_uring_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| size_t sz = vma->vm_end - vma->vm_start; | |
| unsigned long pfn; | |
| void *ptr; | |
| ptr = io_uring_validate_mmap_request(file, vma->vm_pgoff, sz); | |
| if (IS_ERR(ptr)) | |
| return PTR_ERR(ptr); | |
| pfn = virt_to_phys(ptr) >> PAGE_SHIFT; | |
| return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot); | |
| } | |
| static unsigned long io_uring_mmu_get_unmapped_area(struct file *filp, | |
| unsigned long addr, unsigned long len, | |
| unsigned long pgoff, unsigned long flags) | |
| { | |
| void *ptr; | |
| /* | |
| * Do not allow to map to user-provided address to avoid breaking the | |
| * aliasing rules. Userspace is not able to guess the offset address of | |
| * kernel kmalloc()ed memory area. | |
| */ | |
| if (addr) | |
| return -EINVAL; | |
| ptr = io_uring_validate_mmap_request(filp, pgoff, len); | |
| if (IS_ERR(ptr)) | |
| return -ENOMEM; | |
| /* | |
| * Some architectures have strong cache aliasing requirements. | |
| * For such architectures we need a coherent mapping which aliases | |
| * kernel memory *and* userspace memory. To achieve that: | |
| * - use a NULL file pointer to reference physical memory, and | |
| * - use the kernel virtual address of the shared io_uring context | |
| * (instead of the userspace-provided address, which has to be 0UL | |
| * anyway). | |
| * - use the same pgoff which the get_unmapped_area() uses to | |
| * calculate the page colouring. | |
| * For architectures without such aliasing requirements, the | |
| * architecture will return any suitable mapping because addr is 0. | |
| */ | |
| filp = NULL; | |
| flags |= MAP_SHARED; | |
| pgoff = 0; /* has been translated to ptr above */ | |
| #ifdef SHM_COLOUR | |
| addr = (uintptr_t) ptr; | |
| pgoff = addr >> PAGE_SHIFT; | |
| #else | |
| addr = 0UL; | |
| #endif | |
| return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags); | |
| } | |
| #else /* !CONFIG_MMU */ | |
| static int io_uring_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| return is_nommu_shared_mapping(vma->vm_flags) ? 0 : -EINVAL; | |
| } | |
| static unsigned int io_uring_nommu_mmap_capabilities(struct file *file) | |
| { | |
| return NOMMU_MAP_DIRECT | NOMMU_MAP_READ | NOMMU_MAP_WRITE; | |
| } | |
| static unsigned long io_uring_nommu_get_unmapped_area(struct file *file, | |
| unsigned long addr, unsigned long len, | |
| unsigned long pgoff, unsigned long flags) | |
| { | |
| void *ptr; | |
| ptr = io_uring_validate_mmap_request(file, pgoff, len); | |
| if (IS_ERR(ptr)) | |
| return PTR_ERR(ptr); | |
| return (unsigned long) ptr; | |
| } | |
| #endif /* !CONFIG_MMU */ | |
| static int io_validate_ext_arg(unsigned flags, const void __user *argp, size_t argsz) | |
| { | |
| if (flags & IORING_ENTER_EXT_ARG) { | |
| struct io_uring_getevents_arg arg; | |
| if (argsz != sizeof(arg)) | |
| return -EINVAL; | |
| if (copy_from_user(&arg, argp, sizeof(arg))) | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| static int io_get_ext_arg(unsigned flags, const void __user *argp, size_t *argsz, | |
| struct __kernel_timespec __user **ts, | |
| const sigset_t __user **sig) | |
| { | |
| struct io_uring_getevents_arg arg; | |
| /* | |
| * If EXT_ARG isn't set, then we have no timespec and the argp pointer | |
| * is just a pointer to the sigset_t. | |
| */ | |
| if (!(flags & IORING_ENTER_EXT_ARG)) { | |
| *sig = (const sigset_t __user *) argp; | |
| *ts = NULL; | |
| return 0; | |
| } | |
| /* | |
| * EXT_ARG is set - ensure we agree on the size of it and copy in our | |
| * timespec and sigset_t pointers if good. | |
| */ | |
| if (*argsz != sizeof(arg)) | |
| return -EINVAL; | |
| if (copy_from_user(&arg, argp, sizeof(arg))) | |
| return -EFAULT; | |
| if (arg.pad) | |
| return -EINVAL; | |
| *sig = u64_to_user_ptr(arg.sigmask); | |
| *argsz = arg.sigmask_sz; | |
| *ts = u64_to_user_ptr(arg.ts); | |
| return 0; | |
| } | |
| SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, | |
| u32, min_complete, u32, flags, const void __user *, argp, | |
| size_t, argsz) | |
| { | |
| struct io_ring_ctx *ctx; | |
| struct file *file; | |
| long ret; | |
| if (unlikely(flags & ~(IORING_ENTER_GETEVENTS | IORING_ENTER_SQ_WAKEUP | | |
| IORING_ENTER_SQ_WAIT | IORING_ENTER_EXT_ARG | | |
| IORING_ENTER_REGISTERED_RING))) | |
| return -EINVAL; | |
| /* | |
| * Ring fd has been registered via IORING_REGISTER_RING_FDS, we | |
| * need only dereference our task private array to find it. | |
| */ | |
| if (flags & IORING_ENTER_REGISTERED_RING) { | |
| struct io_uring_task *tctx = current->io_uring; | |
| if (unlikely(!tctx || fd >= IO_RINGFD_REG_MAX)) | |
| return -EINVAL; | |
| fd = array_index_nospec(fd, IO_RINGFD_REG_MAX); | |
| file = tctx->registered_rings[fd]; | |
| if (unlikely(!file)) | |
| return -EBADF; | |
| } else { | |
| file = fget(fd); | |
| if (unlikely(!file)) | |
| return -EBADF; | |
| ret = -EOPNOTSUPP; | |
| if (unlikely(!io_is_uring_fops(file))) | |
| goto out; | |
| } | |
| ctx = file->private_data; | |
| ret = -EBADFD; | |
| if (unlikely(ctx->flags & IORING_SETUP_R_DISABLED)) | |
| goto out; | |
| /* | |
| * For SQ polling, the thread will do all submissions and completions. | |
| * Just return the requested submit count, and wake the thread if | |
| * we were asked to. | |
| */ | |
| ret = 0; | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| io_cqring_overflow_flush(ctx); | |
| if (unlikely(ctx->sq_data->thread == NULL)) { | |
| ret = -EOWNERDEAD; | |
| goto out; | |
| } | |
| if (flags & IORING_ENTER_SQ_WAKEUP) | |
| wake_up(&ctx->sq_data->wait); | |
| if (flags & IORING_ENTER_SQ_WAIT) | |
| io_sqpoll_wait_sq(ctx); | |
| ret = to_submit; | |
| } else if (to_submit) { | |
| ret = io_uring_add_tctx_node(ctx); | |
| if (unlikely(ret)) | |
| goto out; | |
| mutex_lock(&ctx->uring_lock); | |
| ret = io_submit_sqes(ctx, to_submit); | |
| if (ret != to_submit) { | |
| mutex_unlock(&ctx->uring_lock); | |
| goto out; | |
| } | |
| if (flags & IORING_ENTER_GETEVENTS) { | |
| if (ctx->syscall_iopoll) | |
| goto iopoll_locked; | |
| /* | |
| * Ignore errors, we'll soon call io_cqring_wait() and | |
| * it should handle ownership problems if any. | |
| */ | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN) | |
| (void)io_run_local_work_locked(ctx, min_complete); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| } | |
| if (flags & IORING_ENTER_GETEVENTS) { | |
| int ret2; | |
| if (ctx->syscall_iopoll) { | |
| /* | |
| * We disallow the app entering submit/complete with | |
| * polling, but we still need to lock the ring to | |
| * prevent racing with polled issue that got punted to | |
| * a workqueue. | |
| */ | |
| mutex_lock(&ctx->uring_lock); | |
| iopoll_locked: | |
| ret2 = io_validate_ext_arg(flags, argp, argsz); | |
| if (likely(!ret2)) { | |
| min_complete = min(min_complete, | |
| ctx->cq_entries); | |
| ret2 = io_iopoll_check(ctx, min_complete); | |
| } | |
| mutex_unlock(&ctx->uring_lock); | |
| } else { | |
| const sigset_t __user *sig; | |
| struct __kernel_timespec __user *ts; | |
| ret2 = io_get_ext_arg(flags, argp, &argsz, &ts, &sig); | |
| if (likely(!ret2)) { | |
| min_complete = min(min_complete, | |
| ctx->cq_entries); | |
| ret2 = io_cqring_wait(ctx, min_complete, sig, | |
| argsz, ts); | |
| } | |
| } | |
| if (!ret) { | |
| ret = ret2; | |
| /* | |
| * EBADR indicates that one or more CQE were dropped. | |
| * Once the user has been informed we can clear the bit | |
| * as they are obviously ok with those drops. | |
| */ | |
| if (unlikely(ret2 == -EBADR)) | |
| clear_bit(IO_CHECK_CQ_DROPPED_BIT, | |
| &ctx->check_cq); | |
| } | |
| } | |
| out: | |
| if (!(flags & IORING_ENTER_REGISTERED_RING)) | |
| fput(file); | |
| return ret; | |
| } | |
| static const struct file_operations io_uring_fops = { | |
| .release = io_uring_release, | |
| .mmap = io_uring_mmap, | |
| #ifndef CONFIG_MMU | |
| .get_unmapped_area = io_uring_nommu_get_unmapped_area, | |
| .mmap_capabilities = io_uring_nommu_mmap_capabilities, | |
| #else | |
| .get_unmapped_area = io_uring_mmu_get_unmapped_area, | |
| #endif | |
| .poll = io_uring_poll, | |
| #ifdef CONFIG_PROC_FS | |
| .show_fdinfo = io_uring_show_fdinfo, | |
| #endif | |
| }; | |
| bool io_is_uring_fops(struct file *file) | |
| { | |
| return file->f_op == &io_uring_fops; | |
| } | |
| static __cold int io_allocate_scq_urings(struct io_ring_ctx *ctx, | |
| struct io_uring_params *p) | |
| { | |
| struct io_rings *rings; | |
| size_t size, sq_array_offset; | |
| void *ptr; | |
| /* make sure these are sane, as we already accounted them */ | |
| ctx->sq_entries = p->sq_entries; | |
| ctx->cq_entries = p->cq_entries; | |
| size = rings_size(ctx, p->sq_entries, p->cq_entries, &sq_array_offset); | |
| if (size == SIZE_MAX) | |
| return -EOVERFLOW; | |
| if (!(ctx->flags & IORING_SETUP_NO_MMAP)) | |
| rings = io_mem_alloc(size); | |
| else | |
| rings = io_rings_map(ctx, p->cq_off.user_addr, size); | |
| if (IS_ERR(rings)) | |
| return PTR_ERR(rings); | |
| ctx->rings = rings; | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) | |
| ctx->sq_array = (u32 *)((char *)rings + sq_array_offset); | |
| rings->sq_ring_mask = p->sq_entries - 1; | |
| rings->cq_ring_mask = p->cq_entries - 1; | |
| rings->sq_ring_entries = p->sq_entries; | |
| rings->cq_ring_entries = p->cq_entries; | |
| if (p->flags & IORING_SETUP_SQE128) | |
| size = array_size(2 * sizeof(struct io_uring_sqe), p->sq_entries); | |
| else | |
| size = array_size(sizeof(struct io_uring_sqe), p->sq_entries); | |
| if (size == SIZE_MAX) { | |
| io_rings_free(ctx); | |
| return -EOVERFLOW; | |
| } | |
| if (!(ctx->flags & IORING_SETUP_NO_MMAP)) | |
| ptr = io_mem_alloc(size); | |
| else | |
| ptr = io_sqes_map(ctx, p->sq_off.user_addr, size); | |
| if (IS_ERR(ptr)) { | |
| io_rings_free(ctx); | |
| return PTR_ERR(ptr); | |
| } | |
| ctx->sq_sqes = ptr; | |
| return 0; | |
| } | |
| static int io_uring_install_fd(struct file *file) | |
| { | |
| int fd; | |
| fd = get_unused_fd_flags(O_RDWR | O_CLOEXEC); | |
| if (fd < 0) | |
| return fd; | |
| fd_install(fd, file); | |
| return fd; | |
| } | |
| /* | |
| * Allocate an anonymous fd, this is what constitutes the application | |
| * visible backing of an io_uring instance. The application mmaps this | |
| * fd to gain access to the SQ/CQ ring details. | |
| */ | |
| static struct file *io_uring_get_file(struct io_ring_ctx *ctx) | |
| { | |
| return anon_inode_getfile_secure("[io_uring]", &io_uring_fops, ctx, | |
| O_RDWR | O_CLOEXEC, NULL); | |
| } | |
| static __cold int io_uring_create(unsigned entries, struct io_uring_params *p, | |
| struct io_uring_params __user *params) | |
| { | |
| struct io_ring_ctx *ctx; | |
| struct io_uring_task *tctx; | |
| struct file *file; | |
| int ret; | |
| if (!entries) | |
| return -EINVAL; | |
| if (entries > IORING_MAX_ENTRIES) { | |
| if (!(p->flags & IORING_SETUP_CLAMP)) | |
| return -EINVAL; | |
| entries = IORING_MAX_ENTRIES; | |
| } | |
| if ((p->flags & IORING_SETUP_REGISTERED_FD_ONLY) | |
| && !(p->flags & IORING_SETUP_NO_MMAP)) | |
| return -EINVAL; | |
| /* | |
| * Use twice as many entries for the CQ ring. It's possible for the | |
| * application to drive a higher depth than the size of the SQ ring, | |
| * since the sqes are only used at submission time. This allows for | |
| * some flexibility in overcommitting a bit. If the application has | |
| * set IORING_SETUP_CQSIZE, it will have passed in the desired number | |
| * of CQ ring entries manually. | |
| */ | |
| p->sq_entries = roundup_pow_of_two(entries); | |
| if (p->flags & IORING_SETUP_CQSIZE) { | |
| /* | |
| * If IORING_SETUP_CQSIZE is set, we do the same roundup | |
| * to a power-of-two, if it isn't already. We do NOT impose | |
| * any cq vs sq ring sizing. | |
| */ | |
| if (!p->cq_entries) | |
| return -EINVAL; | |
| if (p->cq_entries > IORING_MAX_CQ_ENTRIES) { | |
| if (!(p->flags & IORING_SETUP_CLAMP)) | |
| return -EINVAL; | |
| p->cq_entries = IORING_MAX_CQ_ENTRIES; | |
| } | |
| p->cq_entries = roundup_pow_of_two(p->cq_entries); | |
| if (p->cq_entries < p->sq_entries) | |
| return -EINVAL; | |
| } else { | |
| p->cq_entries = 2 * p->sq_entries; | |
| } | |
| ctx = io_ring_ctx_alloc(p); | |
| if (!ctx) | |
| return -ENOMEM; | |
| if ((ctx->flags & IORING_SETUP_DEFER_TASKRUN) && | |
| !(ctx->flags & IORING_SETUP_IOPOLL) && | |
| !(ctx->flags & IORING_SETUP_SQPOLL)) | |
| ctx->task_complete = true; | |
| if (ctx->task_complete || (ctx->flags & IORING_SETUP_IOPOLL)) | |
| ctx->lockless_cq = true; | |
| /* | |
| * lazy poll_wq activation relies on ->task_complete for synchronisation | |
| * purposes, see io_activate_pollwq() | |
| */ | |
| if (!ctx->task_complete) | |
| ctx->poll_activated = true; | |
| /* | |
| * When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, user | |
| * space applications don't need to do io completion events | |
| * polling again, they can rely on io_sq_thread to do polling | |
| * work, which can reduce cpu usage and uring_lock contention. | |
| */ | |
| if (ctx->flags & IORING_SETUP_IOPOLL && | |
| !(ctx->flags & IORING_SETUP_SQPOLL)) | |
| ctx->syscall_iopoll = 1; | |
| ctx->compat = in_compat_syscall(); | |
| if (!ns_capable_noaudit(&init_user_ns, CAP_IPC_LOCK)) | |
| ctx->user = get_uid(current_user()); | |
| /* | |
| * For SQPOLL, we just need a wakeup, always. For !SQPOLL, if | |
| * COOP_TASKRUN is set, then IPIs are never needed by the app. | |
| */ | |
| ret = -EINVAL; | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| /* IPI related flags don't make sense with SQPOLL */ | |
| if (ctx->flags & (IORING_SETUP_COOP_TASKRUN | | |
| IORING_SETUP_TASKRUN_FLAG | | |
| IORING_SETUP_DEFER_TASKRUN)) | |
| goto err; | |
| ctx->notify_method = TWA_SIGNAL_NO_IPI; | |
| } else if (ctx->flags & IORING_SETUP_COOP_TASKRUN) { | |
| ctx->notify_method = TWA_SIGNAL_NO_IPI; | |
| } else { | |
| if (ctx->flags & IORING_SETUP_TASKRUN_FLAG && | |
| !(ctx->flags & IORING_SETUP_DEFER_TASKRUN)) | |
| goto err; | |
| ctx->notify_method = TWA_SIGNAL; | |
| } | |
| /* | |
| * For DEFER_TASKRUN we require the completion task to be the same as the | |
| * submission task. This implies that there is only one submitter, so enforce | |
| * that. | |
| */ | |
| if (ctx->flags & IORING_SETUP_DEFER_TASKRUN && | |
| !(ctx->flags & IORING_SETUP_SINGLE_ISSUER)) { | |
| goto err; | |
| } | |
| /* | |
| * This is just grabbed for accounting purposes. When a process exits, | |
| * the mm is exited and dropped before the files, hence we need to hang | |
| * on to this mm purely for the purposes of being able to unaccount | |
| * memory (locked/pinned vm). It's not used for anything else. | |
| */ | |
| mmgrab(current->mm); | |
| ctx->mm_account = current->mm; | |
| ret = io_allocate_scq_urings(ctx, p); | |
| if (ret) | |
| goto err; | |
| ret = io_sq_offload_create(ctx, p); | |
| if (ret) | |
| goto err; | |
| ret = io_rsrc_init(ctx); | |
| if (ret) | |
| goto err; | |
| p->sq_off.head = offsetof(struct io_rings, sq.head); | |
| p->sq_off.tail = offsetof(struct io_rings, sq.tail); | |
| p->sq_off.ring_mask = offsetof(struct io_rings, sq_ring_mask); | |
| p->sq_off.ring_entries = offsetof(struct io_rings, sq_ring_entries); | |
| p->sq_off.flags = offsetof(struct io_rings, sq_flags); | |
| p->sq_off.dropped = offsetof(struct io_rings, sq_dropped); | |
| if (!(ctx->flags & IORING_SETUP_NO_SQARRAY)) | |
| p->sq_off.array = (char *)ctx->sq_array - (char *)ctx->rings; | |
| p->sq_off.resv1 = 0; | |
| if (!(ctx->flags & IORING_SETUP_NO_MMAP)) | |
| p->sq_off.user_addr = 0; | |
| p->cq_off.head = offsetof(struct io_rings, cq.head); | |
| p->cq_off.tail = offsetof(struct io_rings, cq.tail); | |
| p->cq_off.ring_mask = offsetof(struct io_rings, cq_ring_mask); | |
| p->cq_off.ring_entries = offsetof(struct io_rings, cq_ring_entries); | |
| p->cq_off.overflow = offsetof(struct io_rings, cq_overflow); | |
| p->cq_off.cqes = offsetof(struct io_rings, cqes); | |
| p->cq_off.flags = offsetof(struct io_rings, cq_flags); | |
| p->cq_off.resv1 = 0; | |
| if (!(ctx->flags & IORING_SETUP_NO_MMAP)) | |
| p->cq_off.user_addr = 0; | |
| p->features = IORING_FEAT_SINGLE_MMAP | IORING_FEAT_NODROP | | |
| IORING_FEAT_SUBMIT_STABLE | IORING_FEAT_RW_CUR_POS | | |
| IORING_FEAT_CUR_PERSONALITY | IORING_FEAT_FAST_POLL | | |
| IORING_FEAT_POLL_32BITS | IORING_FEAT_SQPOLL_NONFIXED | | |
| IORING_FEAT_EXT_ARG | IORING_FEAT_NATIVE_WORKERS | | |
| IORING_FEAT_RSRC_TAGS | IORING_FEAT_CQE_SKIP | | |
| IORING_FEAT_LINKED_FILE | IORING_FEAT_REG_REG_RING; | |
| if (copy_to_user(params, p, sizeof(*p))) { | |
| ret = -EFAULT; | |
| goto err; | |
| } | |
| if (ctx->flags & IORING_SETUP_SINGLE_ISSUER | |
| && !(ctx->flags & IORING_SETUP_R_DISABLED)) | |
| WRITE_ONCE(ctx->submitter_task, get_task_struct(current)); | |
| file = io_uring_get_file(ctx); | |
| if (IS_ERR(file)) { | |
| ret = PTR_ERR(file); | |
| goto err; | |
| } | |
| ret = __io_uring_add_tctx_node(ctx); | |
| if (ret) | |
| goto err_fput; | |
| tctx = current->io_uring; | |
| /* | |
| * Install ring fd as the very last thing, so we don't risk someone | |
| * having closed it before we finish setup | |
| */ | |
| if (p->flags & IORING_SETUP_REGISTERED_FD_ONLY) | |
| ret = io_ring_add_registered_file(tctx, file, 0, IO_RINGFD_REG_MAX); | |
| else | |
| ret = io_uring_install_fd(file); | |
| if (ret < 0) | |
| goto err_fput; | |
| trace_io_uring_create(ret, ctx, p->sq_entries, p->cq_entries, p->flags); | |
| return ret; | |
| err: | |
| io_ring_ctx_wait_and_kill(ctx); | |
| return ret; | |
| err_fput: | |
| fput(file); | |
| return ret; | |
| } | |
| /* | |
| * Sets up an aio uring context, and returns the fd. Applications asks for a | |
| * ring size, we return the actual sq/cq ring sizes (among other things) in the | |
| * params structure passed in. | |
| */ | |
| static long io_uring_setup(u32 entries, struct io_uring_params __user *params) | |
| { | |
| struct io_uring_params p; | |
| int i; | |
| if (copy_from_user(&p, params, sizeof(p))) | |
| return -EFAULT; | |
| for (i = 0; i < ARRAY_SIZE(p.resv); i++) { | |
| if (p.resv[i]) | |
| return -EINVAL; | |
| } | |
| if (p.flags & ~(IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL | | |
| IORING_SETUP_SQ_AFF | IORING_SETUP_CQSIZE | | |
| IORING_SETUP_CLAMP | IORING_SETUP_ATTACH_WQ | | |
| IORING_SETUP_R_DISABLED | IORING_SETUP_SUBMIT_ALL | | |
| IORING_SETUP_COOP_TASKRUN | IORING_SETUP_TASKRUN_FLAG | | |
| IORING_SETUP_SQE128 | IORING_SETUP_CQE32 | | |
| IORING_SETUP_SINGLE_ISSUER | IORING_SETUP_DEFER_TASKRUN | | |
| IORING_SETUP_NO_MMAP | IORING_SETUP_REGISTERED_FD_ONLY | | |
| IORING_SETUP_NO_SQARRAY)) | |
| return -EINVAL; | |
| return io_uring_create(entries, &p, params); | |
| } | |
| static inline bool io_uring_allowed(void) | |
| { | |
| int disabled = READ_ONCE(sysctl_io_uring_disabled); | |
| kgid_t io_uring_group; | |
| if (disabled == 2) | |
| return false; | |
| if (disabled == 0 || capable(CAP_SYS_ADMIN)) | |
| return true; | |
| io_uring_group = make_kgid(&init_user_ns, sysctl_io_uring_group); | |
| if (!gid_valid(io_uring_group)) | |
| return false; | |
| return in_group_p(io_uring_group); | |
| } | |
| SYSCALL_DEFINE2(io_uring_setup, u32, entries, | |
| struct io_uring_params __user *, params) | |
| { | |
| if (!io_uring_allowed()) | |
| return -EPERM; | |
| return io_uring_setup(entries, params); | |
| } | |
| static __cold int io_probe(struct io_ring_ctx *ctx, void __user *arg, | |
| unsigned nr_args) | |
| { | |
| struct io_uring_probe *p; | |
| size_t size; | |
| int i, ret; | |
| size = struct_size(p, ops, nr_args); | |
| if (size == SIZE_MAX) | |
| return -EOVERFLOW; | |
| p = kzalloc(size, GFP_KERNEL); | |
| if (!p) | |
| return -ENOMEM; | |
| ret = -EFAULT; | |
| if (copy_from_user(p, arg, size)) | |
| goto out; | |
| ret = -EINVAL; | |
| if (memchr_inv(p, 0, size)) | |
| goto out; | |
| p->last_op = IORING_OP_LAST - 1; | |
| if (nr_args > IORING_OP_LAST) | |
| nr_args = IORING_OP_LAST; | |
| for (i = 0; i < nr_args; i++) { | |
| p->ops[i].op = i; | |
| if (!io_issue_defs[i].not_supported) | |
| p->ops[i].flags = IO_URING_OP_SUPPORTED; | |
| } | |
| p->ops_len = i; | |
| ret = 0; | |
| if (copy_to_user(arg, p, size)) | |
| ret = -EFAULT; | |
| out: | |
| kfree(p); | |
| return ret; | |
| } | |
| static int io_register_personality(struct io_ring_ctx *ctx) | |
| { | |
| const struct cred *creds; | |
| u32 id; | |
| int ret; | |
| creds = get_current_cred(); | |
| ret = xa_alloc_cyclic(&ctx->personalities, &id, (void *)creds, | |
| XA_LIMIT(0, USHRT_MAX), &ctx->pers_next, GFP_KERNEL); | |
| if (ret < 0) { | |
| put_cred(creds); | |
| return ret; | |
| } | |
| return id; | |
| } | |
| static __cold int io_register_restrictions(struct io_ring_ctx *ctx, | |
| void __user *arg, unsigned int nr_args) | |
| { | |
| struct io_uring_restriction *res; | |
| size_t size; | |
| int i, ret; | |
| /* Restrictions allowed only if rings started disabled */ | |
| if (!(ctx->flags & IORING_SETUP_R_DISABLED)) | |
| return -EBADFD; | |
| /* We allow only a single restrictions registration */ | |
| if (ctx->restrictions.registered) | |
| return -EBUSY; | |
| if (!arg || nr_args > IORING_MAX_RESTRICTIONS) | |
| return -EINVAL; | |
| size = array_size(nr_args, sizeof(*res)); | |
| if (size == SIZE_MAX) | |
| return -EOVERFLOW; | |
| res = memdup_user(arg, size); | |
| if (IS_ERR(res)) | |
| return PTR_ERR(res); | |
| ret = 0; | |
| for (i = 0; i < nr_args; i++) { | |
| switch (res[i].opcode) { | |
| case IORING_RESTRICTION_REGISTER_OP: | |
| if (res[i].register_op >= IORING_REGISTER_LAST) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| __set_bit(res[i].register_op, | |
| ctx->restrictions.register_op); | |
| break; | |
| case IORING_RESTRICTION_SQE_OP: | |
| if (res[i].sqe_op >= IORING_OP_LAST) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| __set_bit(res[i].sqe_op, ctx->restrictions.sqe_op); | |
| break; | |
| case IORING_RESTRICTION_SQE_FLAGS_ALLOWED: | |
| ctx->restrictions.sqe_flags_allowed = res[i].sqe_flags; | |
| break; | |
| case IORING_RESTRICTION_SQE_FLAGS_REQUIRED: | |
| ctx->restrictions.sqe_flags_required = res[i].sqe_flags; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| } | |
| out: | |
| /* Reset all restrictions if an error happened */ | |
| if (ret != 0) | |
| memset(&ctx->restrictions, 0, sizeof(ctx->restrictions)); | |
| else | |
| ctx->restrictions.registered = true; | |
| kfree(res); | |
| return ret; | |
| } | |
| static int io_register_enable_rings(struct io_ring_ctx *ctx) | |
| { | |
| if (!(ctx->flags & IORING_SETUP_R_DISABLED)) | |
| return -EBADFD; | |
| if (ctx->flags & IORING_SETUP_SINGLE_ISSUER && !ctx->submitter_task) { | |
| WRITE_ONCE(ctx->submitter_task, get_task_struct(current)); | |
| /* | |
| * Lazy activation attempts would fail if it was polled before | |
| * submitter_task is set. | |
| */ | |
| if (wq_has_sleeper(&ctx->poll_wq)) | |
| io_activate_pollwq(ctx); | |
| } | |
| if (ctx->restrictions.registered) | |
| ctx->restricted = 1; | |
| ctx->flags &= ~IORING_SETUP_R_DISABLED; | |
| if (ctx->sq_data && wq_has_sleeper(&ctx->sq_data->wait)) | |
| wake_up(&ctx->sq_data->wait); | |
| return 0; | |
| } | |
| static __cold int __io_register_iowq_aff(struct io_ring_ctx *ctx, | |
| cpumask_var_t new_mask) | |
| { | |
| int ret; | |
| if (!(ctx->flags & IORING_SETUP_SQPOLL)) { | |
| ret = io_wq_cpu_affinity(current->io_uring, new_mask); | |
| } else { | |
| mutex_unlock(&ctx->uring_lock); | |
| ret = io_sqpoll_wq_cpu_affinity(ctx, new_mask); | |
| mutex_lock(&ctx->uring_lock); | |
| } | |
| return ret; | |
| } | |
| static __cold int io_register_iowq_aff(struct io_ring_ctx *ctx, | |
| void __user *arg, unsigned len) | |
| { | |
| cpumask_var_t new_mask; | |
| int ret; | |
| if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) | |
| return -ENOMEM; | |
| cpumask_clear(new_mask); | |
| if (len > cpumask_size()) | |
| len = cpumask_size(); | |
| if (in_compat_syscall()) { | |
| ret = compat_get_bitmap(cpumask_bits(new_mask), | |
| (const compat_ulong_t __user *)arg, | |
| len * 8 /* CHAR_BIT */); | |
| } else { | |
| ret = copy_from_user(new_mask, arg, len); | |
| } | |
| if (ret) { | |
| free_cpumask_var(new_mask); | |
| return -EFAULT; | |
| } | |
| ret = __io_register_iowq_aff(ctx, new_mask); | |
| free_cpumask_var(new_mask); | |
| return ret; | |
| } | |
| static __cold int io_unregister_iowq_aff(struct io_ring_ctx *ctx) | |
| { | |
| return __io_register_iowq_aff(ctx, NULL); | |
| } | |
| static __cold int io_register_iowq_max_workers(struct io_ring_ctx *ctx, | |
| void __user *arg) | |
| __must_hold(&ctx->uring_lock) | |
| { | |
| struct io_tctx_node *node; | |
| struct io_uring_task *tctx = NULL; | |
| struct io_sq_data *sqd = NULL; | |
| __u32 new_count[2]; | |
| int i, ret; | |
| if (copy_from_user(new_count, arg, sizeof(new_count))) | |
| return -EFAULT; | |
| for (i = 0; i < ARRAY_SIZE(new_count); i++) | |
| if (new_count[i] > INT_MAX) | |
| return -EINVAL; | |
| if (ctx->flags & IORING_SETUP_SQPOLL) { | |
| sqd = ctx->sq_data; | |
| if (sqd) { | |
| /* | |
| * Observe the correct sqd->lock -> ctx->uring_lock | |
| * ordering. Fine to drop uring_lock here, we hold | |
| * a ref to the ctx. | |
| */ | |
| refcount_inc(&sqd->refs); | |
| mutex_unlock(&ctx->uring_lock); | |
| mutex_lock(&sqd->lock); | |
| mutex_lock(&ctx->uring_lock); | |
| if (sqd->thread) | |
| tctx = sqd->thread->io_uring; | |
| } | |
| } else { | |
| tctx = current->io_uring; | |
| } | |
| BUILD_BUG_ON(sizeof(new_count) != sizeof(ctx->iowq_limits)); | |
| for (i = 0; i < ARRAY_SIZE(new_count); i++) | |
| if (new_count[i]) | |
| ctx->iowq_limits[i] = new_count[i]; | |
| ctx->iowq_limits_set = true; | |
| if (tctx && tctx->io_wq) { | |
| ret = io_wq_max_workers(tctx->io_wq, new_count); | |
| if (ret) | |
| goto err; | |
| } else { | |
| memset(new_count, 0, sizeof(new_count)); | |
| } | |
| if (sqd) { | |
| mutex_unlock(&sqd->lock); | |
| io_put_sq_data(sqd); | |
| } | |
| if (copy_to_user(arg, new_count, sizeof(new_count))) | |
| return -EFAULT; | |
| /* that's it for SQPOLL, only the SQPOLL task creates requests */ | |
| if (sqd) | |
| return 0; | |
| /* now propagate the restriction to all registered users */ | |
| list_for_each_entry(node, &ctx->tctx_list, ctx_node) { | |
| struct io_uring_task *tctx = node->task->io_uring; | |
| if (WARN_ON_ONCE(!tctx->io_wq)) | |
| continue; | |
| for (i = 0; i < ARRAY_SIZE(new_count); i++) | |
| new_count[i] = ctx->iowq_limits[i]; | |
| /* ignore errors, it always returns zero anyway */ | |
| (void)io_wq_max_workers(tctx->io_wq, new_count); | |
| } | |
| return 0; | |
| err: | |
| if (sqd) { | |
| mutex_unlock(&sqd->lock); | |
| io_put_sq_data(sqd); | |
| } | |
| return ret; | |
| } | |
| static int __io_uring_register(struct io_ring_ctx *ctx, unsigned opcode, | |
| void __user *arg, unsigned nr_args) | |
| __releases(ctx->uring_lock) | |
| __acquires(ctx->uring_lock) | |
| { | |
| int ret; | |
| /* | |
| * We don't quiesce the refs for register anymore and so it can't be | |
| * dying as we're holding a file ref here. | |
| */ | |
| if (WARN_ON_ONCE(percpu_ref_is_dying(&ctx->refs))) | |
| return -ENXIO; | |
| if (ctx->submitter_task && ctx->submitter_task != current) | |
| return -EEXIST; | |
| if (ctx->restricted) { | |
| opcode = array_index_nospec(opcode, IORING_REGISTER_LAST); | |
| if (!test_bit(opcode, ctx->restrictions.register_op)) | |
| return -EACCES; | |
| } | |
| switch (opcode) { | |
| case IORING_REGISTER_BUFFERS: | |
| ret = -EFAULT; | |
| if (!arg) | |
| break; | |
| ret = io_sqe_buffers_register(ctx, arg, nr_args, NULL); | |
| break; | |
| case IORING_UNREGISTER_BUFFERS: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_sqe_buffers_unregister(ctx); | |
| break; | |
| case IORING_REGISTER_FILES: | |
| ret = -EFAULT; | |
| if (!arg) | |
| break; | |
| ret = io_sqe_files_register(ctx, arg, nr_args, NULL); | |
| break; | |
| case IORING_UNREGISTER_FILES: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_sqe_files_unregister(ctx); | |
| break; | |
| case IORING_REGISTER_FILES_UPDATE: | |
| ret = io_register_files_update(ctx, arg, nr_args); | |
| break; | |
| case IORING_REGISTER_EVENTFD: | |
| ret = -EINVAL; | |
| if (nr_args != 1) | |
| break; | |
| ret = io_eventfd_register(ctx, arg, 0); | |
| break; | |
| case IORING_REGISTER_EVENTFD_ASYNC: | |
| ret = -EINVAL; | |
| if (nr_args != 1) | |
| break; | |
| ret = io_eventfd_register(ctx, arg, 1); | |
| break; | |
| case IORING_UNREGISTER_EVENTFD: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_eventfd_unregister(ctx); | |
| break; | |
| case IORING_REGISTER_PROBE: | |
| ret = -EINVAL; | |
| if (!arg || nr_args > 256) | |
| break; | |
| ret = io_probe(ctx, arg, nr_args); | |
| break; | |
| case IORING_REGISTER_PERSONALITY: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_register_personality(ctx); | |
| break; | |
| case IORING_UNREGISTER_PERSONALITY: | |
| ret = -EINVAL; | |
| if (arg) | |
| break; | |
| ret = io_unregister_personality(ctx, nr_args); | |
| break; | |
| case IORING_REGISTER_ENABLE_RINGS: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_register_enable_rings(ctx); | |
| break; | |
| case IORING_REGISTER_RESTRICTIONS: | |
| ret = io_register_restrictions(ctx, arg, nr_args); | |
| break; | |
| case IORING_REGISTER_FILES2: | |
| ret = io_register_rsrc(ctx, arg, nr_args, IORING_RSRC_FILE); | |
| break; | |
| case IORING_REGISTER_FILES_UPDATE2: | |
| ret = io_register_rsrc_update(ctx, arg, nr_args, | |
| IORING_RSRC_FILE); | |
| break; | |
| case IORING_REGISTER_BUFFERS2: | |
| ret = io_register_rsrc(ctx, arg, nr_args, IORING_RSRC_BUFFER); | |
| break; | |
| case IORING_REGISTER_BUFFERS_UPDATE: | |
| ret = io_register_rsrc_update(ctx, arg, nr_args, | |
| IORING_RSRC_BUFFER); | |
| break; | |
| case IORING_REGISTER_IOWQ_AFF: | |
| ret = -EINVAL; | |
| if (!arg || !nr_args) | |
| break; | |
| ret = io_register_iowq_aff(ctx, arg, nr_args); | |
| break; | |
| case IORING_UNREGISTER_IOWQ_AFF: | |
| ret = -EINVAL; | |
| if (arg || nr_args) | |
| break; | |
| ret = io_unregister_iowq_aff(ctx); | |
| break; | |
| case IORING_REGISTER_IOWQ_MAX_WORKERS: | |
| ret = -EINVAL; | |
| if (!arg || nr_args != 2) | |
| break; | |
| ret = io_register_iowq_max_workers(ctx, arg); | |
| break; | |
| case IORING_REGISTER_RING_FDS: | |
| ret = io_ringfd_register(ctx, arg, nr_args); | |
| break; | |
| case IORING_UNREGISTER_RING_FDS: | |
| ret = io_ringfd_unregister(ctx, arg, nr_args); | |
| break; | |
| case IORING_REGISTER_PBUF_RING: | |
| ret = -EINVAL; | |
| if (!arg || nr_args != 1) | |
| break; | |
| ret = io_register_pbuf_ring(ctx, arg); | |
| break; | |
| case IORING_UNREGISTER_PBUF_RING: | |
| ret = -EINVAL; | |
| if (!arg || nr_args != 1) | |
| break; | |
| ret = io_unregister_pbuf_ring(ctx, arg); | |
| break; | |
| case IORING_REGISTER_SYNC_CANCEL: | |
| ret = -EINVAL; | |
| if (!arg || nr_args != 1) | |
| break; | |
| ret = io_sync_cancel(ctx, arg); | |
| break; | |
| case IORING_REGISTER_FILE_ALLOC_RANGE: | |
| ret = -EINVAL; | |
| if (!arg || nr_args) | |
| break; | |
| ret = io_register_file_alloc_range(ctx, arg); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| return ret; | |
| } | |
| SYSCALL_DEFINE4(io_uring_register, unsigned int, fd, unsigned int, opcode, | |
| void __user *, arg, unsigned int, nr_args) | |
| { | |
| struct io_ring_ctx *ctx; | |
| long ret = -EBADF; | |
| struct file *file; | |
| bool use_registered_ring; | |
| use_registered_ring = !!(opcode & IORING_REGISTER_USE_REGISTERED_RING); | |
| opcode &= ~IORING_REGISTER_USE_REGISTERED_RING; | |
| if (opcode >= IORING_REGISTER_LAST) | |
| return -EINVAL; | |
| if (use_registered_ring) { | |
| /* | |
| * Ring fd has been registered via IORING_REGISTER_RING_FDS, we | |
| * need only dereference our task private array to find it. | |
| */ | |
| struct io_uring_task *tctx = current->io_uring; | |
| if (unlikely(!tctx || fd >= IO_RINGFD_REG_MAX)) | |
| return -EINVAL; | |
| fd = array_index_nospec(fd, IO_RINGFD_REG_MAX); | |
| file = tctx->registered_rings[fd]; | |
| if (unlikely(!file)) | |
| return -EBADF; | |
| } else { | |
| file = fget(fd); | |
| if (unlikely(!file)) | |
| return -EBADF; | |
| ret = -EOPNOTSUPP; | |
| if (!io_is_uring_fops(file)) | |
| goto out_fput; | |
| } | |
| ctx = file->private_data; | |
| mutex_lock(&ctx->uring_lock); | |
| ret = __io_uring_register(ctx, opcode, arg, nr_args); | |
| mutex_unlock(&ctx->uring_lock); | |
| trace_io_uring_register(ctx, opcode, ctx->nr_user_files, ctx->nr_user_bufs, ret); | |
| out_fput: | |
| if (!use_registered_ring) | |
| fput(file); | |
| return ret; | |
| } | |
| static int __init io_uring_init(void) | |
| { | |
| #define __BUILD_BUG_VERIFY_OFFSET_SIZE(stype, eoffset, esize, ename) do { \ | |
| BUILD_BUG_ON(offsetof(stype, ename) != eoffset); \ | |
| BUILD_BUG_ON(sizeof_field(stype, ename) != esize); \ | |
| } while (0) | |
| #define BUILD_BUG_SQE_ELEM(eoffset, etype, ename) \ | |
| __BUILD_BUG_VERIFY_OFFSET_SIZE(struct io_uring_sqe, eoffset, sizeof(etype), ename) | |
| #define BUILD_BUG_SQE_ELEM_SIZE(eoffset, esize, ename) \ | |
| __BUILD_BUG_VERIFY_OFFSET_SIZE(struct io_uring_sqe, eoffset, esize, ename) | |
| BUILD_BUG_ON(sizeof(struct io_uring_sqe) != 64); | |
| BUILD_BUG_SQE_ELEM(0, __u8, opcode); | |
| BUILD_BUG_SQE_ELEM(1, __u8, flags); | |
| BUILD_BUG_SQE_ELEM(2, __u16, ioprio); | |
| BUILD_BUG_SQE_ELEM(4, __s32, fd); | |
| BUILD_BUG_SQE_ELEM(8, __u64, off); | |
| BUILD_BUG_SQE_ELEM(8, __u64, addr2); | |
| BUILD_BUG_SQE_ELEM(8, __u32, cmd_op); | |
| BUILD_BUG_SQE_ELEM(12, __u32, __pad1); | |
| BUILD_BUG_SQE_ELEM(16, __u64, addr); | |
| BUILD_BUG_SQE_ELEM(16, __u64, splice_off_in); | |
| BUILD_BUG_SQE_ELEM(24, __u32, len); | |
| BUILD_BUG_SQE_ELEM(28, __kernel_rwf_t, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ int, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ __u32, rw_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, fsync_flags); | |
| BUILD_BUG_SQE_ELEM(28, /* compat */ __u16, poll_events); | |
| BUILD_BUG_SQE_ELEM(28, __u32, poll32_events); | |
| BUILD_BUG_SQE_ELEM(28, __u32, sync_range_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, msg_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, timeout_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, accept_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, cancel_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, open_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, statx_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, fadvise_advice); | |
| BUILD_BUG_SQE_ELEM(28, __u32, splice_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, rename_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, unlink_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, hardlink_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, xattr_flags); | |
| BUILD_BUG_SQE_ELEM(28, __u32, msg_ring_flags); | |
| BUILD_BUG_SQE_ELEM(32, __u64, user_data); | |
| BUILD_BUG_SQE_ELEM(40, __u16, buf_index); | |
| BUILD_BUG_SQE_ELEM(40, __u16, buf_group); | |
| BUILD_BUG_SQE_ELEM(42, __u16, personality); | |
| BUILD_BUG_SQE_ELEM(44, __s32, splice_fd_in); | |
| BUILD_BUG_SQE_ELEM(44, __u32, file_index); | |
| BUILD_BUG_SQE_ELEM(44, __u16, addr_len); | |
| BUILD_BUG_SQE_ELEM(46, __u16, __pad3[0]); | |
| BUILD_BUG_SQE_ELEM(48, __u64, addr3); | |
| BUILD_BUG_SQE_ELEM_SIZE(48, 0, cmd); | |
| BUILD_BUG_SQE_ELEM(56, __u64, __pad2); | |
| BUILD_BUG_ON(sizeof(struct io_uring_files_update) != | |
| sizeof(struct io_uring_rsrc_update)); | |
| BUILD_BUG_ON(sizeof(struct io_uring_rsrc_update) > | |
| sizeof(struct io_uring_rsrc_update2)); | |
| /* ->buf_index is u16 */ | |
| BUILD_BUG_ON(offsetof(struct io_uring_buf_ring, bufs) != 0); | |
| BUILD_BUG_ON(offsetof(struct io_uring_buf, resv) != | |
| offsetof(struct io_uring_buf_ring, tail)); | |
| /* should fit into one byte */ | |
| BUILD_BUG_ON(SQE_VALID_FLAGS >= (1 << 8)); | |
| BUILD_BUG_ON(SQE_COMMON_FLAGS >= (1 << 8)); | |
| BUILD_BUG_ON((SQE_VALID_FLAGS | SQE_COMMON_FLAGS) != SQE_VALID_FLAGS); | |
| BUILD_BUG_ON(__REQ_F_LAST_BIT > 8 * sizeof(int)); | |
| BUILD_BUG_ON(sizeof(atomic_t) != sizeof(u32)); | |
| io_uring_optable_init(); | |
| /* | |
| * Allow user copy in the per-command field, which starts after the | |
| * file in io_kiocb and until the opcode field. The openat2 handling | |
| * requires copying in user memory into the io_kiocb object in that | |
| * range, and HARDENED_USERCOPY will complain if we haven't | |
| * correctly annotated this range. | |
| */ | |
| req_cachep = kmem_cache_create_usercopy("io_kiocb", | |
| sizeof(struct io_kiocb), 0, | |
| SLAB_HWCACHE_ALIGN | SLAB_PANIC | | |
| SLAB_ACCOUNT | SLAB_TYPESAFE_BY_RCU, | |
| offsetof(struct io_kiocb, cmd.data), | |
| sizeof_field(struct io_kiocb, cmd.data), NULL); | |
| iou_wq = alloc_workqueue("iou_exit", WQ_UNBOUND, 64); | |
| #ifdef CONFIG_SYSCTL | |
| register_sysctl_init("kernel", kernel_io_uring_disabled_table); | |
| #endif | |
| return 0; | |
| }; | |
| __initcall(io_uring_init); |