| /* |
| * axp20x power button driver. |
| * |
| * Copyright (C) 2013 Carlo Caione <carlo@caione.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/errno.h> |
| #include <linux/irq.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #define AXP20X_PEK_STARTUP_MASK (0xc0) |
| #define AXP20X_PEK_SHUTDOWN_MASK (0x03) |
| |
| struct axp20x_info { |
| const struct axp20x_time *startup_time; |
| unsigned int startup_mask; |
| const struct axp20x_time *shutdown_time; |
| unsigned int shutdown_mask; |
| }; |
| |
| struct axp20x_pek { |
| struct axp20x_dev *axp20x; |
| struct input_dev *input; |
| struct axp20x_info *info; |
| int irq_dbr; |
| int irq_dbf; |
| }; |
| |
| struct axp20x_time { |
| unsigned int time; |
| unsigned int idx; |
| }; |
| |
| static const struct axp20x_time startup_time[] = { |
| { .time = 128, .idx = 0 }, |
| { .time = 1000, .idx = 2 }, |
| { .time = 3000, .idx = 1 }, |
| { .time = 2000, .idx = 3 }, |
| }; |
| |
| static const struct axp20x_time axp221_startup_time[] = { |
| { .time = 128, .idx = 0 }, |
| { .time = 1000, .idx = 1 }, |
| { .time = 2000, .idx = 2 }, |
| { .time = 3000, .idx = 3 }, |
| }; |
| |
| static const struct axp20x_time shutdown_time[] = { |
| { .time = 4000, .idx = 0 }, |
| { .time = 6000, .idx = 1 }, |
| { .time = 8000, .idx = 2 }, |
| { .time = 10000, .idx = 3 }, |
| }; |
| |
| static const struct axp20x_info axp20x_info = { |
| .startup_time = startup_time, |
| .startup_mask = AXP20X_PEK_STARTUP_MASK, |
| .shutdown_time = shutdown_time, |
| .shutdown_mask = AXP20X_PEK_SHUTDOWN_MASK, |
| }; |
| |
| static const struct axp20x_info axp221_info = { |
| .startup_time = axp221_startup_time, |
| .startup_mask = AXP20X_PEK_STARTUP_MASK, |
| .shutdown_time = shutdown_time, |
| .shutdown_mask = AXP20X_PEK_SHUTDOWN_MASK, |
| }; |
| |
| static ssize_t axp20x_show_attr(struct device *dev, |
| const struct axp20x_time *time, |
| unsigned int mask, char *buf) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| unsigned int val; |
| int ret, i; |
| |
| ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val); |
| if (ret != 0) |
| return ret; |
| |
| val &= mask; |
| val >>= ffs(mask) - 1; |
| |
| for (i = 0; i < 4; i++) |
| if (val == time[i].idx) |
| val = time[i].time; |
| |
| return sprintf(buf, "%u\n", val); |
| } |
| |
| static ssize_t axp20x_show_attr_startup(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| return axp20x_show_attr(dev, axp20x_pek->info->startup_time, |
| axp20x_pek->info->startup_mask, buf); |
| } |
| |
| static ssize_t axp20x_show_attr_shutdown(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| return axp20x_show_attr(dev, axp20x_pek->info->shutdown_time, |
| axp20x_pek->info->shutdown_mask, buf); |
| } |
| |
| static ssize_t axp20x_store_attr(struct device *dev, |
| const struct axp20x_time *time, |
| unsigned int mask, const char *buf, |
| size_t count) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| char val_str[20]; |
| size_t len; |
| int ret, i; |
| unsigned int val, idx = 0; |
| unsigned int best_err = UINT_MAX; |
| |
| val_str[sizeof(val_str) - 1] = '\0'; |
| strncpy(val_str, buf, sizeof(val_str) - 1); |
| len = strlen(val_str); |
| |
| if (len && val_str[len - 1] == '\n') |
| val_str[len - 1] = '\0'; |
| |
| ret = kstrtouint(val_str, 10, &val); |
| if (ret) |
| return ret; |
| |
| for (i = 3; i >= 0; i--) { |
| unsigned int err; |
| |
| err = abs(time[i].time - val); |
| if (err < best_err) { |
| best_err = err; |
| idx = time[i].idx; |
| } |
| |
| if (!err) |
| break; |
| } |
| |
| idx <<= ffs(mask) - 1; |
| ret = regmap_update_bits(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, |
| mask, idx); |
| if (ret != 0) |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| static ssize_t axp20x_store_attr_startup(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| return axp20x_store_attr(dev, axp20x_pek->info->startup_time, |
| axp20x_pek->info->startup_mask, buf, count); |
| } |
| |
| static ssize_t axp20x_store_attr_shutdown(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| return axp20x_store_attr(dev, axp20x_pek->info->shutdown_time, |
| axp20x_pek->info->shutdown_mask, buf, count); |
| } |
| |
| static DEVICE_ATTR(startup, 0644, axp20x_show_attr_startup, |
| axp20x_store_attr_startup); |
| static DEVICE_ATTR(shutdown, 0644, axp20x_show_attr_shutdown, |
| axp20x_store_attr_shutdown); |
| |
| static struct attribute *axp20x_attrs[] = { |
| &dev_attr_startup.attr, |
| &dev_attr_shutdown.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(axp20x); |
| |
| static irqreturn_t axp20x_pek_irq(int irq, void *pwr) |
| { |
| struct axp20x_pek *axp20x_pek = pwr; |
| struct input_dev *idev = axp20x_pek->input; |
| |
| if (!idev) |
| return IRQ_HANDLED; |
| |
| /* |
| * The power-button is connected to ground so a falling edge (dbf) |
| * means it is pressed. |
| */ |
| if (irq == axp20x_pek->irq_dbf) |
| input_report_key(idev, KEY_POWER, true); |
| else if (irq == axp20x_pek->irq_dbr) |
| input_report_key(idev, KEY_POWER, false); |
| |
| input_sync(idev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, |
| struct platform_device *pdev) |
| { |
| struct input_dev *idev; |
| int error; |
| |
| axp20x_pek->input = devm_input_allocate_device(&pdev->dev); |
| if (!axp20x_pek->input) |
| return -ENOMEM; |
| |
| idev = axp20x_pek->input; |
| |
| idev->name = "axp20x-pek"; |
| idev->phys = "m1kbd/input2"; |
| idev->dev.parent = &pdev->dev; |
| |
| input_set_capability(idev, EV_KEY, KEY_POWER); |
| |
| input_set_drvdata(idev, axp20x_pek); |
| |
| error = input_register_device(idev); |
| if (error) { |
| dev_err(&pdev->dev, "Can't register input device: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek, |
| struct platform_device *pdev) |
| { |
| unsigned long long hrv = 0; |
| acpi_status status; |
| |
| if (IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY) && |
| axp20x_pek->axp20x->variant == AXP288_ID) { |
| status = acpi_evaluate_integer(ACPI_HANDLE(pdev->dev.parent), |
| "_HRV", NULL, &hrv); |
| if (ACPI_FAILURE(status)) |
| dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n"); |
| |
| /* |
| * On Cherry Trail platforms (hrv == 3), do not register the |
| * input device if there is an "INTCFD9" or "ACPI0011" gpio |
| * button ACPI device, as that handles the power button too, |
| * and otherwise we end up reporting all presses twice. |
| */ |
| if (hrv == 3 && (acpi_dev_present("INTCFD9", NULL, -1) || |
| acpi_dev_present("ACPI0011", NULL, -1))) |
| return false; |
| |
| } |
| |
| return true; |
| } |
| #else |
| static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek, |
| struct platform_device *pdev) |
| { |
| return true; |
| } |
| #endif |
| |
| static int axp20x_pek_probe(struct platform_device *pdev) |
| { |
| struct axp20x_pek *axp20x_pek; |
| const struct platform_device_id *match = platform_get_device_id(pdev); |
| int error; |
| |
| if (!match) { |
| dev_err(&pdev->dev, "Failed to get platform_device_id\n"); |
| return -EINVAL; |
| } |
| |
| axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek), |
| GFP_KERNEL); |
| if (!axp20x_pek) |
| return -ENOMEM; |
| |
| axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); |
| |
| axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); |
| if (axp20x_pek->irq_dbr < 0) |
| return axp20x_pek->irq_dbr; |
| axp20x_pek->irq_dbr = regmap_irq_get_virq( |
| axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbr); |
| |
| axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF"); |
| if (axp20x_pek->irq_dbf < 0) |
| return axp20x_pek->irq_dbf; |
| axp20x_pek->irq_dbf = regmap_irq_get_virq( |
| axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbf); |
| |
| if (axp20x_pek_should_register_input(axp20x_pek, pdev)) { |
| error = axp20x_pek_probe_input_device(axp20x_pek, pdev); |
| if (error) |
| return error; |
| } |
| |
| axp20x_pek->info = (struct axp20x_info *)match->driver_data; |
| |
| error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr, |
| axp20x_pek_irq, 0, |
| "axp20x-pek-dbr", axp20x_pek); |
| if (error < 0) { |
| dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n", |
| axp20x_pek->irq_dbr, error); |
| return error; |
| } |
| |
| error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf, |
| axp20x_pek_irq, 0, |
| "axp20x-pek-dbf", axp20x_pek); |
| if (error < 0) { |
| dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n", |
| axp20x_pek->irq_dbf, error); |
| return error; |
| } |
| |
| device_init_wakeup(&pdev->dev, true); |
| |
| platform_set_drvdata(pdev, axp20x_pek); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused axp20x_pek_suspend(struct device *dev) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| /* |
| * As nested threaded IRQs are not automatically disabled during |
| * suspend, we must explicitly disable non-wakeup IRQs. |
| */ |
| if (device_may_wakeup(dev)) { |
| enable_irq_wake(axp20x_pek->irq_dbf); |
| enable_irq_wake(axp20x_pek->irq_dbr); |
| } else { |
| disable_irq(axp20x_pek->irq_dbf); |
| disable_irq(axp20x_pek->irq_dbr); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused axp20x_pek_resume(struct device *dev) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) { |
| disable_irq_wake(axp20x_pek->irq_dbf); |
| disable_irq_wake(axp20x_pek->irq_dbr); |
| } else { |
| enable_irq(axp20x_pek->irq_dbf); |
| enable_irq(axp20x_pek->irq_dbr); |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev) |
| { |
| struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); |
| |
| if (axp20x_pek->axp20x->variant != AXP288_ID) |
| return 0; |
| |
| /* |
| * Clear interrupts from button presses during suspend, to avoid |
| * a wakeup power-button press getting reported to userspace. |
| */ |
| regmap_write(axp20x_pek->axp20x->regmap, |
| AXP20X_IRQ1_STATE + AXP288_IRQ_POKN / 8, |
| BIT(AXP288_IRQ_POKN % 8)); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops axp20x_pek_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(axp20x_pek_suspend, axp20x_pek_resume) |
| #ifdef CONFIG_PM_SLEEP |
| .resume_noirq = axp20x_pek_resume_noirq, |
| #endif |
| }; |
| |
| static const struct platform_device_id axp_pek_id_match[] = { |
| { |
| .name = "axp20x-pek", |
| .driver_data = (kernel_ulong_t)&axp20x_info, |
| }, |
| { |
| .name = "axp221-pek", |
| .driver_data = (kernel_ulong_t)&axp221_info, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(platform, axp_pek_id_match); |
| |
| static struct platform_driver axp20x_pek_driver = { |
| .probe = axp20x_pek_probe, |
| .id_table = axp_pek_id_match, |
| .driver = { |
| .name = "axp20x-pek", |
| .pm = &axp20x_pek_pm_ops, |
| .dev_groups = axp20x_groups, |
| }, |
| }; |
| module_platform_driver(axp20x_pek_driver); |
| |
| MODULE_DESCRIPTION("axp20x Power Button"); |
| MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); |
| MODULE_LICENSE("GPL"); |