| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC |
| * |
| * Authors: |
| * Serge Semin <Sergey.Semin@baikalelectronics.ru> |
| * |
| * Baikal-T1 Physically Mapped Internal ROM driver |
| */ |
| #include <linux/bits.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/mtd/map.h> |
| #include <linux/mtd/xip.h> |
| #include <linux/mux/consumer.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| |
| #include "physmap-bt1-rom.h" |
| |
| /* |
| * Baikal-T1 SoC ROMs are only accessible by the dword-aligned instructions. |
| * We have to take this into account when implementing the data read-methods. |
| * Note there is no need in bothering with endianness, since both Baikal-T1 |
| * CPU and MMIO are LE. |
| */ |
| static map_word __xipram bt1_rom_map_read(struct map_info *map, |
| unsigned long ofs) |
| { |
| void __iomem *src = map->virt + ofs; |
| unsigned long shift; |
| map_word ret; |
| u32 data; |
| |
| /* Read data within offset dword. */ |
| shift = (unsigned long)src & 0x3; |
| data = readl_relaxed(src - shift); |
| if (!shift) { |
| ret.x[0] = data; |
| return ret; |
| } |
| ret.x[0] = data >> (shift * BITS_PER_BYTE); |
| |
| /* Read data from the next dword. */ |
| shift = 4 - shift; |
| if (ofs + shift >= map->size) |
| return ret; |
| |
| data = readl_relaxed(src + shift); |
| ret.x[0] |= data << (shift * BITS_PER_BYTE); |
| |
| return ret; |
| } |
| |
| static void __xipram bt1_rom_map_copy_from(struct map_info *map, |
| void *to, unsigned long from, |
| ssize_t len) |
| { |
| void __iomem *src = map->virt + from; |
| ssize_t shift, chunk; |
| u32 data; |
| |
| if (len <= 0 || from >= map->size) |
| return; |
| |
| /* Make sure we don't go over the map limit. */ |
| len = min_t(ssize_t, map->size - from, len); |
| |
| /* |
| * Since requested data size can be pretty big we have to implement |
| * the copy procedure as optimal as possible. That's why it's split |
| * up into the next three stages: unaligned head, aligned body, |
| * unaligned tail. |
| */ |
| shift = (ssize_t)src & 0x3; |
| if (shift) { |
| chunk = min_t(ssize_t, 4 - shift, len); |
| data = readl_relaxed(src - shift); |
| memcpy(to, (char *)&data + shift, chunk); |
| src += chunk; |
| to += chunk; |
| len -= chunk; |
| } |
| |
| while (len >= 4) { |
| data = readl_relaxed(src); |
| memcpy(to, &data, 4); |
| src += 4; |
| to += 4; |
| len -= 4; |
| } |
| |
| if (len) { |
| data = readl_relaxed(src); |
| memcpy(to, &data, len); |
| } |
| } |
| |
| int of_flash_probe_bt1_rom(struct platform_device *pdev, |
| struct device_node *np, |
| struct map_info *map) |
| { |
| struct device *dev = &pdev->dev; |
| |
| /* It's supposed to be read-only MTD. */ |
| if (!of_device_is_compatible(np, "mtd-rom")) { |
| dev_info(dev, "No mtd-rom compatible string\n"); |
| return 0; |
| } |
| |
| /* Multiplatform guard. */ |
| if (!of_device_is_compatible(np, "baikal,bt1-int-rom")) |
| return 0; |
| |
| /* Sanity check the device parameters retrieved from DTB. */ |
| if (map->bankwidth != 4) |
| dev_warn(dev, "Bank width is supposed to be 32 bits wide\n"); |
| |
| map->read = bt1_rom_map_read; |
| map->copy_from = bt1_rom_map_copy_from; |
| |
| return 0; |
| } |