|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | *  bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform | 
|  | *  (derived from bytcr_rt5640.c) | 
|  | * | 
|  | *  Copyright (C) 2015 Intel Corp | 
|  | *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
|  | * | 
|  | * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/property.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/gpio/machine.h> | 
|  | #include <linux/slab.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/jack.h> | 
|  | #include <sound/soc-acpi.h> | 
|  | #include "../../codecs/rt5651.h" | 
|  | #include "../atom/sst-atom-controls.h" | 
|  | #include "../common/soc-intel-quirks.h" | 
|  |  | 
|  | enum { | 
|  | BYT_RT5651_DMIC_MAP, | 
|  | BYT_RT5651_IN1_MAP, | 
|  | BYT_RT5651_IN2_MAP, | 
|  | BYT_RT5651_IN1_IN2_MAP, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | BYT_RT5651_JD_NULL	= (RT5651_JD_NULL << 4), | 
|  | BYT_RT5651_JD1_1	= (RT5651_JD1_1 << 4), | 
|  | BYT_RT5651_JD1_2	= (RT5651_JD1_2 << 4), | 
|  | BYT_RT5651_JD2		= (RT5651_JD2 << 4), | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | BYT_RT5651_OVCD_TH_600UA  = (6 << 8), | 
|  | BYT_RT5651_OVCD_TH_1500UA = (15 << 8), | 
|  | BYT_RT5651_OVCD_TH_2000UA = (20 << 8), | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | BYT_RT5651_OVCD_SF_0P5	= (RT5651_OVCD_SF_0P5 << 13), | 
|  | BYT_RT5651_OVCD_SF_0P75	= (RT5651_OVCD_SF_0P75 << 13), | 
|  | BYT_RT5651_OVCD_SF_1P0	= (RT5651_OVCD_SF_1P0 << 13), | 
|  | BYT_RT5651_OVCD_SF_1P5	= (RT5651_OVCD_SF_1P5 << 13), | 
|  | }; | 
|  |  | 
|  | #define BYT_RT5651_MAP(quirk)		((quirk) & GENMASK(3, 0)) | 
|  | #define BYT_RT5651_JDSRC(quirk)		(((quirk) & GENMASK(7, 4)) >> 4) | 
|  | #define BYT_RT5651_OVCD_TH(quirk)	(((quirk) & GENMASK(12, 8)) >> 8) | 
|  | #define BYT_RT5651_OVCD_SF(quirk)	(((quirk) & GENMASK(14, 13)) >> 13) | 
|  | #define BYT_RT5651_DMIC_EN		BIT(16) | 
|  | #define BYT_RT5651_MCLK_EN		BIT(17) | 
|  | #define BYT_RT5651_MCLK_25MHZ		BIT(18) | 
|  | #define BYT_RT5651_SSP2_AIF2		BIT(19) /* default is using AIF1  */ | 
|  | #define BYT_RT5651_SSP0_AIF1		BIT(20) | 
|  | #define BYT_RT5651_SSP0_AIF2		BIT(21) | 
|  | #define BYT_RT5651_HP_LR_SWAPPED	BIT(22) | 
|  | #define BYT_RT5651_MONO_SPEAKER		BIT(23) | 
|  | #define BYT_RT5651_JD_NOT_INV		BIT(24) | 
|  |  | 
|  | #define BYT_RT5651_DEFAULT_QUIRKS	(BYT_RT5651_MCLK_EN | \ | 
|  | BYT_RT5651_JD1_1   | \ | 
|  | BYT_RT5651_OVCD_TH_2000UA | \ | 
|  | BYT_RT5651_OVCD_SF_0P75) | 
|  |  | 
|  | /* jack-detect-source + inv + dmic-en + ovcd-th + -sf + terminating entry */ | 
|  | #define MAX_NO_PROPS 6 | 
|  |  | 
|  | struct byt_rt5651_private { | 
|  | struct clk *mclk; | 
|  | struct gpio_desc *ext_amp_gpio; | 
|  | struct gpio_desc *hp_detect; | 
|  | struct snd_soc_jack jack; | 
|  | }; | 
|  |  | 
|  | static const struct acpi_gpio_mapping *byt_rt5651_gpios; | 
|  |  | 
|  | /* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ | 
|  | static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP; | 
|  |  | 
|  | static int quirk_override = -1; | 
|  | module_param_named(quirk, quirk_override, int, 0444); | 
|  | MODULE_PARM_DESC(quirk, "Board-specific quirk override"); | 
|  |  | 
|  | static void log_quirks(struct device *dev) | 
|  | { | 
|  | if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) | 
|  | dev_info(dev, "quirk DMIC_MAP enabled"); | 
|  | if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) | 
|  | dev_info(dev, "quirk IN1_MAP enabled"); | 
|  | if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) | 
|  | dev_info(dev, "quirk IN2_MAP enabled"); | 
|  | if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) | 
|  | dev_info(dev, "quirk IN1_IN2_MAP enabled"); | 
|  | if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { | 
|  | dev_info(dev, "quirk realtek,jack-detect-source %ld\n", | 
|  | BYT_RT5651_JDSRC(byt_rt5651_quirk)); | 
|  | dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", | 
|  | BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); | 
|  | dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", | 
|  | BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); | 
|  | } | 
|  | if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) | 
|  | dev_info(dev, "quirk DMIC enabled"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) | 
|  | dev_info(dev, "quirk MCLK_EN enabled"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) | 
|  | dev_info(dev, "quirk MCLK_25MHZ enabled"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) | 
|  | dev_info(dev, "quirk SSP2_AIF2 enabled\n"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) | 
|  | dev_info(dev, "quirk SSP0_AIF1 enabled\n"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) | 
|  | dev_info(dev, "quirk SSP0_AIF2 enabled\n"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) | 
|  | dev_info(dev, "quirk MONO_SPEAKER enabled\n"); | 
|  | if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) | 
|  | dev_info(dev, "quirk JD_NOT_INV enabled\n"); | 
|  | } | 
|  |  | 
|  | #define BYT_CODEC_DAI1	"rt5651-aif1" | 
|  | #define BYT_CODEC_DAI2	"rt5651-aif2" | 
|  |  | 
|  | static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, | 
|  | int rate, int bclk_ratio) | 
|  | { | 
|  | int clk_id, clk_freq, ret; | 
|  |  | 
|  | /* Configure the PLL before selecting it */ | 
|  | if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { | 
|  | clk_id = RT5651_PLL1_S_BCLK1, | 
|  | clk_freq = rate * bclk_ratio; | 
|  | } else { | 
|  | clk_id = RT5651_PLL1_S_MCLK; | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) | 
|  | clk_freq = 25000000; | 
|  | else | 
|  | clk_freq = 19200000; | 
|  | } | 
|  | ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, rate * 512); | 
|  | if (ret < 0) { | 
|  | dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, | 
|  | rate * 512, SND_SOC_CLOCK_IN); | 
|  | if (ret < 0) { | 
|  | dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int platform_clock_control(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *k, int  event) | 
|  | { | 
|  | struct snd_soc_dapm_context *dapm = w->dapm; | 
|  | struct snd_soc_card *card = dapm->card; | 
|  | struct snd_soc_dai *codec_dai; | 
|  | struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); | 
|  | int ret; | 
|  |  | 
|  | codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); | 
|  | if (!codec_dai) | 
|  | codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); | 
|  | if (!codec_dai) { | 
|  | dev_err(card->dev, | 
|  | "Codec dai not found; Unable to set platform clock\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (SND_SOC_DAPM_EVENT_ON(event)) { | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { | 
|  | ret = clk_prepare_enable(priv->mclk); | 
|  | if (ret < 0) { | 
|  | dev_err(card->dev, | 
|  | "could not configure MCLK state"); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50); | 
|  | } else { | 
|  | /* | 
|  | * Set codec clock source to internal clock before | 
|  | * turning off the platform clock. Codec needs clock | 
|  | * for Jack detection and button press | 
|  | */ | 
|  | ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, | 
|  | 48000 * 512, | 
|  | SND_SOC_CLOCK_IN); | 
|  | if (!ret) | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) | 
|  | clk_disable_unprepare(priv->mclk); | 
|  | } | 
|  |  | 
|  | if (ret < 0) { | 
|  | dev_err(card->dev, "can't set codec sysclk: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *kcontrol, int event) | 
|  | { | 
|  | struct snd_soc_card *card = w->dapm->card; | 
|  | struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); | 
|  |  | 
|  | if (SND_SOC_DAPM_EVENT_ON(event)) | 
|  | gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); | 
|  | else | 
|  | gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { | 
|  | SND_SOC_DAPM_HP("Headphone", NULL), | 
|  | SND_SOC_DAPM_MIC("Headset Mic", NULL), | 
|  | SND_SOC_DAPM_MIC("Internal Mic", NULL), | 
|  | SND_SOC_DAPM_SPK("Speaker", NULL), | 
|  | SND_SOC_DAPM_LINE("Line In", NULL), | 
|  | SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, | 
|  | platform_clock_control, SND_SOC_DAPM_PRE_PMU | | 
|  | SND_SOC_DAPM_POST_PMD), | 
|  | SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, | 
|  | rt5651_ext_amp_power_event, | 
|  | SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { | 
|  | {"Headphone", NULL, "Platform Clock"}, | 
|  | {"Headset Mic", NULL, "Platform Clock"}, | 
|  | {"Internal Mic", NULL, "Platform Clock"}, | 
|  | {"Speaker", NULL, "Platform Clock"}, | 
|  | {"Speaker", NULL, "Ext Amp Power"}, | 
|  | {"Line In", NULL, "Platform Clock"}, | 
|  |  | 
|  | {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ | 
|  | {"Headphone", NULL, "HPOL"}, | 
|  | {"Headphone", NULL, "HPOR"}, | 
|  | {"Speaker", NULL, "LOUTL"}, | 
|  | {"Speaker", NULL, "LOUTR"}, | 
|  | {"IN2P", NULL, "Line In"}, | 
|  | {"IN2N", NULL, "Line In"}, | 
|  |  | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { | 
|  | {"DMIC L1", NULL, "Internal Mic"}, | 
|  | {"DMIC R1", NULL, "Internal Mic"}, | 
|  | {"IN2P", NULL, "Headset Mic"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { | 
|  | {"Internal Mic", NULL, "micbias1"}, | 
|  | {"IN1P", NULL, "Internal Mic"}, | 
|  | {"IN3P", NULL, "Headset Mic"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { | 
|  | {"Internal Mic", NULL, "micbias1"}, | 
|  | {"IN2P", NULL, "Internal Mic"}, | 
|  | {"IN3P", NULL, "Headset Mic"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { | 
|  | {"Internal Mic", NULL, "micbias1"}, | 
|  | {"IN1P", NULL, "Internal Mic"}, | 
|  | {"IN2P", NULL, "Internal Mic"}, | 
|  | {"IN3P", NULL, "Headset Mic"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { | 
|  | {"ssp0 Tx", NULL, "modem_out"}, | 
|  | {"modem_in", NULL, "ssp0 Rx"}, | 
|  |  | 
|  | {"AIF1 Playback", NULL, "ssp0 Tx"}, | 
|  | {"ssp0 Rx", NULL, "AIF1 Capture"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = { | 
|  | {"ssp0 Tx", NULL, "modem_out"}, | 
|  | {"modem_in", NULL, "ssp0 Rx"}, | 
|  |  | 
|  | {"AIF2 Playback", NULL, "ssp0 Tx"}, | 
|  | {"ssp0 Rx", NULL, "AIF2 Capture"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = { | 
|  | {"ssp2 Tx", NULL, "codec_out0"}, | 
|  | {"ssp2 Tx", NULL, "codec_out1"}, | 
|  | {"codec_in0", NULL, "ssp2 Rx"}, | 
|  | {"codec_in1", NULL, "ssp2 Rx"}, | 
|  |  | 
|  | {"AIF1 Playback", NULL, "ssp2 Tx"}, | 
|  | {"ssp2 Rx", NULL, "AIF1 Capture"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = { | 
|  | {"ssp2 Tx", NULL, "codec_out0"}, | 
|  | {"ssp2 Tx", NULL, "codec_out1"}, | 
|  | {"codec_in0", NULL, "ssp2 Rx"}, | 
|  | {"codec_in1", NULL, "ssp2 Rx"}, | 
|  |  | 
|  | {"AIF2 Playback", NULL, "ssp2 Tx"}, | 
|  | {"ssp2 Rx", NULL, "AIF2 Capture"}, | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new byt_rt5651_controls[] = { | 
|  | SOC_DAPM_PIN_SWITCH("Headphone"), | 
|  | SOC_DAPM_PIN_SWITCH("Headset Mic"), | 
|  | SOC_DAPM_PIN_SWITCH("Internal Mic"), | 
|  | SOC_DAPM_PIN_SWITCH("Speaker"), | 
|  | SOC_DAPM_PIN_SWITCH("Line In"), | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_jack_pin bytcr_jack_pins[] = { | 
|  | { | 
|  | .pin	= "Headphone", | 
|  | .mask	= SND_JACK_HEADPHONE, | 
|  | }, | 
|  | { | 
|  | .pin	= "Headset Mic", | 
|  | .mask	= SND_JACK_MICROPHONE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); | 
|  | struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); | 
|  | snd_pcm_format_t format = params_format(params); | 
|  | int rate = params_rate(params); | 
|  | int bclk_ratio; | 
|  |  | 
|  | if (format == SNDRV_PCM_FORMAT_S16_LE) | 
|  | bclk_ratio = 32; | 
|  | else | 
|  | bclk_ratio = 50; | 
|  |  | 
|  | return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio); | 
|  | } | 
|  |  | 
|  | static const struct acpi_gpio_params pov_p1006w_hp_detect = { 1, 0, false }; | 
|  | static const struct acpi_gpio_params pov_p1006w_ext_amp_en = { 2, 0, true }; | 
|  |  | 
|  | static const struct acpi_gpio_mapping byt_rt5651_pov_p1006w_gpios[] = { | 
|  | { "hp-detect-gpios", &pov_p1006w_hp_detect, 1, }, | 
|  | { "ext-amp-enable-gpios", &pov_p1006w_ext_amp_en, 1, }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static int byt_rt5651_pov_p1006w_quirk_cb(const struct dmi_system_id *id) | 
|  | { | 
|  | byt_rt5651_quirk = (unsigned long)id->driver_data; | 
|  | byt_rt5651_gpios = byt_rt5651_pov_p1006w_gpios; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) | 
|  | { | 
|  | byt_rt5651_quirk = (unsigned long)id->driver_data; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id byt_rt5651_quirk_table[] = { | 
|  | { | 
|  | /* Chuwi Hi8 Pro (CWI513) */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_HP_LR_SWAPPED | | 
|  | BYT_RT5651_MONO_SPEAKER), | 
|  | }, | 
|  | { | 
|  | /* Chuwi Vi8 Plus (CWI519) */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_HP_LR_SWAPPED | | 
|  | BYT_RT5651_MONO_SPEAKER), | 
|  | }, | 
|  | { | 
|  | /* Complet Electro Serv MY8307 */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Complet Electro Serv"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "MY8307"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_MONO_SPEAKER | | 
|  | BYT_RT5651_JD_NOT_INV), | 
|  | }, | 
|  | { | 
|  | /* I.T.Works TW701, Ployer Momo7w and Trekstor ST70416-6 | 
|  | * (these all use the same mainboard) */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), | 
|  | /* Partial match for all of itWORKS.G.WI71C.JGBMRBA, | 
|  | * TREK.G.WI71C.JGBMRBA0x and MOMO.G.WI71C.MABMRBA02 */ | 
|  | DMI_MATCH(DMI_BIOS_VERSION, ".G.WI71C."), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_SSP0_AIF1 | | 
|  | BYT_RT5651_MONO_SPEAKER), | 
|  | }, | 
|  | { | 
|  | /* Jumper EZpad 7 */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Jumper"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"), | 
|  | /* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_JD_NOT_INV), | 
|  | }, | 
|  | { | 
|  | /* KIANO SlimNote 14.2 */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN1_IN2_MAP), | 
|  | }, | 
|  | { | 
|  | /* Minnowboard Max B3 */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_IN1_MAP), | 
|  | }, | 
|  | { | 
|  | /* Minnowboard Turbot */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "ADI"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_MCLK_EN | | 
|  | BYT_RT5651_IN1_MAP), | 
|  | }, | 
|  | { | 
|  | /* Point of View mobii wintab p1006w (v1.0) */ | 
|  | .callback = byt_rt5651_pov_p1006w_quirk_cb, | 
|  | .matches = { | 
|  | DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), | 
|  | DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"), | 
|  | /* Note 105b is Foxcon's USB/PCI vendor id */ | 
|  | DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"), | 
|  | DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DMIC_MAP | | 
|  | BYT_RT5651_OVCD_TH_2000UA | | 
|  | BYT_RT5651_OVCD_SF_0P75 | | 
|  | BYT_RT5651_DMIC_EN | | 
|  | BYT_RT5651_MCLK_EN | | 
|  | BYT_RT5651_SSP0_AIF1), | 
|  | }, | 
|  | { | 
|  | /* VIOS LTH17 */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_IN1_IN2_MAP | | 
|  | BYT_RT5651_JD1_1 | | 
|  | BYT_RT5651_OVCD_TH_2000UA | | 
|  | BYT_RT5651_OVCD_SF_1P0 | | 
|  | BYT_RT5651_MCLK_EN), | 
|  | }, | 
|  | { | 
|  | /* Yours Y8W81 (and others using the same mainboard) */ | 
|  | .callback = byt_rt5651_quirk_cb, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), | 
|  | /* Partial match for all devs with a W86C mainboard */ | 
|  | DMI_MATCH(DMI_BIOS_VERSION, ".F.W86C."), | 
|  | }, | 
|  | .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | | 
|  | BYT_RT5651_IN2_MAP | | 
|  | BYT_RT5651_SSP0_AIF1 | | 
|  | BYT_RT5651_MONO_SPEAKER), | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Note this MUST be called before snd_soc_register_card(), so that the props | 
|  | * are in place before the codec component driver's probe function parses them. | 
|  | */ | 
|  | static int byt_rt5651_add_codec_device_props(struct device *i2c_dev) | 
|  | { | 
|  | struct property_entry props[MAX_NO_PROPS] = {}; | 
|  | int cnt = 0; | 
|  |  | 
|  | props[cnt++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source", | 
|  | BYT_RT5651_JDSRC(byt_rt5651_quirk)); | 
|  |  | 
|  | props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-threshold-microamp", | 
|  | BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); | 
|  |  | 
|  | props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-scale-factor", | 
|  | BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) | 
|  | props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,dmic-en"); | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) | 
|  | props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); | 
|  |  | 
|  | return device_add_properties(i2c_dev, props); | 
|  | } | 
|  |  | 
|  | static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) | 
|  | { | 
|  | struct snd_soc_card *card = runtime->card; | 
|  | struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component; | 
|  | struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); | 
|  | const struct snd_soc_dapm_route *custom_map; | 
|  | int num_routes; | 
|  | int report; | 
|  | int ret; | 
|  |  | 
|  | card->dapm.idle_bias_off = true; | 
|  |  | 
|  | /* Start with RC clk for jack-detect (we disable MCLK below) */ | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) | 
|  | snd_soc_component_update_bits(codec, RT5651_GLB_CLK, | 
|  | RT5651_SCLK_SRC_MASK, RT5651_SCLK_SRC_RCCLK); | 
|  |  | 
|  | switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { | 
|  | case BYT_RT5651_IN1_MAP: | 
|  | custom_map = byt_rt5651_intmic_in1_map; | 
|  | num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); | 
|  | break; | 
|  | case BYT_RT5651_IN2_MAP: | 
|  | custom_map = byt_rt5651_intmic_in2_map; | 
|  | num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); | 
|  | break; | 
|  | case BYT_RT5651_IN1_IN2_MAP: | 
|  | custom_map = byt_rt5651_intmic_in1_in2_map; | 
|  | num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); | 
|  | break; | 
|  | default: | 
|  | custom_map = byt_rt5651_intmic_dmic_map; | 
|  | num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); | 
|  | } | 
|  | ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) { | 
|  | ret = snd_soc_dapm_add_routes(&card->dapm, | 
|  | byt_rt5651_ssp2_aif2_map, | 
|  | ARRAY_SIZE(byt_rt5651_ssp2_aif2_map)); | 
|  | } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) { | 
|  | ret = snd_soc_dapm_add_routes(&card->dapm, | 
|  | byt_rt5651_ssp0_aif1_map, | 
|  | ARRAY_SIZE(byt_rt5651_ssp0_aif1_map)); | 
|  | } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) { | 
|  | ret = snd_soc_dapm_add_routes(&card->dapm, | 
|  | byt_rt5651_ssp0_aif2_map, | 
|  | ARRAY_SIZE(byt_rt5651_ssp0_aif2_map)); | 
|  | } else { | 
|  | ret = snd_soc_dapm_add_routes(&card->dapm, | 
|  | byt_rt5651_ssp2_aif1_map, | 
|  | ARRAY_SIZE(byt_rt5651_ssp2_aif1_map)); | 
|  | } | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = snd_soc_add_card_controls(card, byt_rt5651_controls, | 
|  | ARRAY_SIZE(byt_rt5651_controls)); | 
|  | if (ret) { | 
|  | dev_err(card->dev, "unable to add card controls\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { | 
|  | /* | 
|  | * The firmware might enable the clock at | 
|  | * boot (this information may or may not | 
|  | * be reflected in the enable clock register). | 
|  | * To change the rate we must disable the clock | 
|  | * first to cover these cases. Due to common | 
|  | * clock framework restrictions that do not allow | 
|  | * to disable a clock that has not been enabled, | 
|  | * we need to enable the clock first. | 
|  | */ | 
|  | ret = clk_prepare_enable(priv->mclk); | 
|  | if (!ret) | 
|  | clk_disable_unprepare(priv->mclk); | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) | 
|  | ret = clk_set_rate(priv->mclk, 25000000); | 
|  | else | 
|  | ret = clk_set_rate(priv->mclk, 19200000); | 
|  |  | 
|  | if (ret) | 
|  | dev_err(card->dev, "unable to set MCLK rate\n"); | 
|  | } | 
|  |  | 
|  | report = 0; | 
|  | if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) | 
|  | report = SND_JACK_HEADSET | SND_JACK_BTN_0; | 
|  | else if (priv->hp_detect) | 
|  | report = SND_JACK_HEADSET; | 
|  |  | 
|  | if (report) { | 
|  | ret = snd_soc_card_jack_new(runtime->card, "Headset", | 
|  | report, &priv->jack, bytcr_jack_pins, | 
|  | ARRAY_SIZE(bytcr_jack_pins)); | 
|  | if (ret) { | 
|  | dev_err(runtime->dev, "jack creation failed %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (report & SND_JACK_BTN_0) | 
|  | snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, | 
|  | KEY_PLAYPAUSE); | 
|  |  | 
|  | ret = snd_soc_component_set_jack(codec, &priv->jack, | 
|  | priv->hp_detect); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct snd_interval *rate = hw_param_interval(params, | 
|  | SNDRV_PCM_HW_PARAM_RATE); | 
|  | struct snd_interval *channels = hw_param_interval(params, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS); | 
|  | int ret, bits; | 
|  |  | 
|  | /* The DSP will covert the FE rate to 48k, stereo */ | 
|  | rate->min = rate->max = 48000; | 
|  | channels->min = channels->max = 2; | 
|  |  | 
|  | if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || | 
|  | (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { | 
|  | /* set SSP0 to 16-bit */ | 
|  | params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); | 
|  | bits = 16; | 
|  | } else { | 
|  | /* set SSP2 to 24-bit */ | 
|  | params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); | 
|  | bits = 24; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Default mode for SSP configuration is TDM 4 slot, override config | 
|  | * with explicit setting to I2S 2ch. The word length is set with | 
|  | * dai_set_tdm_slot() since there is no other API exposed | 
|  | */ | 
|  | ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), | 
|  | SND_SOC_DAIFMT_I2S     | | 
|  | SND_SOC_DAIFMT_NB_NF   | | 
|  | SND_SOC_DAIFMT_CBS_CFS | 
|  | ); | 
|  |  | 
|  | if (ret < 0) { | 
|  | dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); | 
|  | if (ret < 0) { | 
|  | dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const unsigned int rates_48000[] = { | 
|  | 48000, | 
|  | }; | 
|  |  | 
|  | static const struct snd_pcm_hw_constraint_list constraints_48000 = { | 
|  | .count = ARRAY_SIZE(rates_48000), | 
|  | .list  = rates_48000, | 
|  | }; | 
|  |  | 
|  | static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream) | 
|  | { | 
|  | return snd_pcm_hw_constraint_list(substream->runtime, 0, | 
|  | SNDRV_PCM_HW_PARAM_RATE, | 
|  | &constraints_48000); | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_ops byt_rt5651_aif1_ops = { | 
|  | .startup = byt_rt5651_aif1_startup, | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_ops byt_rt5651_be_ssp2_ops = { | 
|  | .hw_params = byt_rt5651_aif1_hw_params, | 
|  | }; | 
|  |  | 
|  | SND_SOC_DAILINK_DEF(dummy, | 
|  | DAILINK_COMP_ARRAY(COMP_DUMMY())); | 
|  |  | 
|  | SND_SOC_DAILINK_DEF(media, | 
|  | DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); | 
|  |  | 
|  | SND_SOC_DAILINK_DEF(deepbuffer, | 
|  | DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); | 
|  |  | 
|  | SND_SOC_DAILINK_DEF(ssp2_port, | 
|  | DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); | 
|  | SND_SOC_DAILINK_DEF(ssp2_codec, | 
|  | DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5651:00", "rt5651-aif1"))); | 
|  |  | 
|  | SND_SOC_DAILINK_DEF(platform, | 
|  | DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); | 
|  |  | 
|  | static struct snd_soc_dai_link byt_rt5651_dais[] = { | 
|  | [MERR_DPCM_AUDIO] = { | 
|  | .name = "Audio Port", | 
|  | .stream_name = "Audio", | 
|  | .nonatomic = true, | 
|  | .dynamic = 1, | 
|  | .dpcm_playback = 1, | 
|  | .dpcm_capture = 1, | 
|  | .ops = &byt_rt5651_aif1_ops, | 
|  | SND_SOC_DAILINK_REG(media, dummy, platform), | 
|  | }, | 
|  | [MERR_DPCM_DEEP_BUFFER] = { | 
|  | .name = "Deep-Buffer Audio Port", | 
|  | .stream_name = "Deep-Buffer Audio", | 
|  | .nonatomic = true, | 
|  | .dynamic = 1, | 
|  | .dpcm_playback = 1, | 
|  | .ops = &byt_rt5651_aif1_ops, | 
|  | SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), | 
|  | }, | 
|  | /* CODEC<->CODEC link */ | 
|  | /* back ends */ | 
|  | { | 
|  | .name = "SSP2-Codec", | 
|  | .id = 0, | 
|  | .no_pcm = 1, | 
|  | .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | 
|  | | SND_SOC_DAIFMT_CBS_CFS, | 
|  | .be_hw_params_fixup = byt_rt5651_codec_fixup, | 
|  | .nonatomic = true, | 
|  | .dpcm_playback = 1, | 
|  | .dpcm_capture = 1, | 
|  | .init = byt_rt5651_init, | 
|  | .ops = &byt_rt5651_be_ssp2_ops, | 
|  | SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* SoC card */ | 
|  | static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; | 
|  | #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) | 
|  | static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */ | 
|  | #endif | 
|  | static char byt_rt5651_components[50]; /* = "cfg-spk:* cfg-mic:*" */ | 
|  |  | 
|  | static int byt_rt5651_suspend(struct snd_soc_card *card) | 
|  | { | 
|  | struct snd_soc_component *component; | 
|  |  | 
|  | if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) | 
|  | return 0; | 
|  |  | 
|  | for_each_card_components(card, component) { | 
|  | if (!strcmp(component->name, byt_rt5651_codec_name)) { | 
|  | dev_dbg(component->dev, "disabling jack detect before suspend\n"); | 
|  | snd_soc_component_set_jack(component, NULL, NULL); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int byt_rt5651_resume(struct snd_soc_card *card) | 
|  | { | 
|  | struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); | 
|  | struct snd_soc_component *component; | 
|  |  | 
|  | if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) | 
|  | return 0; | 
|  |  | 
|  | for_each_card_components(card, component) { | 
|  | if (!strcmp(component->name, byt_rt5651_codec_name)) { | 
|  | dev_dbg(component->dev, "re-enabling jack detect after resume\n"); | 
|  | snd_soc_component_set_jack(component, &priv->jack, | 
|  | priv->hp_detect); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) | 
|  | /* use space before codec name to simplify card ID, and simplify driver name */ | 
|  | #define CARD_NAME "bytcht rt5651" /* card name will be 'sof-bytcht rt5651' */ | 
|  | #define DRIVER_NAME "SOF" | 
|  | #else | 
|  | #define CARD_NAME "bytcr-rt5651" | 
|  | #define DRIVER_NAME NULL /* card name will be used for driver name */ | 
|  | #endif | 
|  |  | 
|  | static struct snd_soc_card byt_rt5651_card = { | 
|  | .name = CARD_NAME, | 
|  | .driver_name = DRIVER_NAME, | 
|  | .owner = THIS_MODULE, | 
|  | .dai_link = byt_rt5651_dais, | 
|  | .num_links = ARRAY_SIZE(byt_rt5651_dais), | 
|  | .dapm_widgets = byt_rt5651_widgets, | 
|  | .num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets), | 
|  | .dapm_routes = byt_rt5651_audio_map, | 
|  | .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), | 
|  | .fully_routed = true, | 
|  | .suspend_pre = byt_rt5651_suspend, | 
|  | .resume_post = byt_rt5651_resume, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; | 
|  |  | 
|  | static const struct acpi_gpio_mapping cht_rt5651_gpios[] = { | 
|  | /* | 
|  | * Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, | 
|  | * other boards may  have I2cSerialBusV2, GpioInt, GpioIo instead. | 
|  | * We want the GpioIo one for the ext-amp-enable-gpio. | 
|  | */ | 
|  | { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */ | 
|  | u64 aif_value;       /* 1: AIF1, 2: AIF2 */ | 
|  | u64 mclock_value;    /* usually 25MHz (0x17d7940), ignored */ | 
|  | }; | 
|  |  | 
|  | static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) | 
|  | { | 
|  | static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" }; | 
|  | struct byt_rt5651_private *priv; | 
|  | struct snd_soc_acpi_mach *mach; | 
|  | const char *platform_name; | 
|  | struct acpi_device *adev; | 
|  | struct device *codec_dev; | 
|  | bool is_bytcr = false; | 
|  | int ret_val = 0; | 
|  | int dai_index = 0; | 
|  | int i; | 
|  |  | 
|  | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* register the soc card */ | 
|  | byt_rt5651_card.dev = &pdev->dev; | 
|  |  | 
|  | mach = byt_rt5651_card.dev->platform_data; | 
|  | snd_soc_card_set_drvdata(&byt_rt5651_card, priv); | 
|  |  | 
|  | /* fix index of codec dai */ | 
|  | for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { | 
|  | if (!strcmp(byt_rt5651_dais[i].codecs->name, | 
|  | "i2c-10EC5651:00")) { | 
|  | dai_index = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* fixup codec name based on HID */ | 
|  | adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); | 
|  | if (adev) { | 
|  | snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), | 
|  | "i2c-%s", acpi_dev_name(adev)); | 
|  | put_device(&adev->dev); | 
|  | byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name; | 
|  | } else { | 
|  | dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, | 
|  | byt_rt5651_codec_name); | 
|  | if (!codec_dev) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | /* | 
|  | * swap SSP0 if bytcr is detected | 
|  | * (will be overridden if DMI quirk is detected) | 
|  | */ | 
|  | if (soc_intel_is_byt()) { | 
|  | if (mach->mach_params.acpi_ipc_irq_index == 0) | 
|  | is_bytcr = true; | 
|  | } | 
|  |  | 
|  | if (is_bytcr) { | 
|  | /* | 
|  | * Baytrail CR platforms may have CHAN package in BIOS, try | 
|  | * to find relevant routing quirk based as done on Windows | 
|  | * platforms. We have to read the information directly from the | 
|  | * BIOS, at this stage the card is not created and the links | 
|  | * with the codec driver/pdata are non-existent | 
|  | */ | 
|  |  | 
|  | struct acpi_chan_package chan_package; | 
|  |  | 
|  | /* format specified: 2 64-bit integers */ | 
|  | struct acpi_buffer format = {sizeof("NN"), "NN"}; | 
|  | struct acpi_buffer state = {0, NULL}; | 
|  | struct snd_soc_acpi_package_context pkg_ctx; | 
|  | bool pkg_found = false; | 
|  |  | 
|  | state.length = sizeof(chan_package); | 
|  | state.pointer = &chan_package; | 
|  |  | 
|  | pkg_ctx.name = "CHAN"; | 
|  | pkg_ctx.length = 2; | 
|  | pkg_ctx.format = &format; | 
|  | pkg_ctx.state = &state; | 
|  | pkg_ctx.data_valid = false; | 
|  |  | 
|  | pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, | 
|  | &pkg_ctx); | 
|  | if (pkg_found) { | 
|  | if (chan_package.aif_value == 1) { | 
|  | dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); | 
|  | byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1; | 
|  | } else  if (chan_package.aif_value == 2) { | 
|  | dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); | 
|  | byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; | 
|  | } else { | 
|  | dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); | 
|  | pkg_found = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!pkg_found) { | 
|  | /* no BIOS indications, assume SSP0-AIF2 connection */ | 
|  | byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* check quirks before creating card */ | 
|  | dmi_check_system(byt_rt5651_quirk_table); | 
|  |  | 
|  | if (quirk_override != -1) { | 
|  | dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n", | 
|  | byt_rt5651_quirk, quirk_override); | 
|  | byt_rt5651_quirk = quirk_override; | 
|  | } | 
|  |  | 
|  | /* Must be called before register_card, also see declaration comment. */ | 
|  | ret_val = byt_rt5651_add_codec_device_props(codec_dev); | 
|  | if (ret_val) { | 
|  | put_device(codec_dev); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* Cherry Trail devices use an external amplifier enable gpio */ | 
|  | if (soc_intel_is_cht() && !byt_rt5651_gpios) | 
|  | byt_rt5651_gpios = cht_rt5651_gpios; | 
|  |  | 
|  | if (byt_rt5651_gpios) { | 
|  | devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); | 
|  | priv->ext_amp_gpio = devm_fwnode_gpiod_get(&pdev->dev, | 
|  | codec_dev->fwnode, | 
|  | "ext-amp-enable", | 
|  | GPIOD_OUT_LOW, | 
|  | "speaker-amp"); | 
|  | if (IS_ERR(priv->ext_amp_gpio)) { | 
|  | ret_val = PTR_ERR(priv->ext_amp_gpio); | 
|  | switch (ret_val) { | 
|  | case -ENOENT: | 
|  | priv->ext_amp_gpio = NULL; | 
|  | break; | 
|  | default: | 
|  | dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", | 
|  | ret_val); | 
|  | fallthrough; | 
|  | case -EPROBE_DEFER: | 
|  | put_device(codec_dev); | 
|  | return ret_val; | 
|  | } | 
|  | } | 
|  | priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev, | 
|  | codec_dev->fwnode, | 
|  | "hp-detect", | 
|  | GPIOD_IN, | 
|  | "hp-detect"); | 
|  | if (IS_ERR(priv->hp_detect)) { | 
|  | ret_val = PTR_ERR(priv->hp_detect); | 
|  | switch (ret_val) { | 
|  | case -ENOENT: | 
|  | priv->hp_detect = NULL; | 
|  | break; | 
|  | default: | 
|  | dev_err(&pdev->dev, "Failed to get hp-detect GPIO: %d\n", | 
|  | ret_val); | 
|  | fallthrough; | 
|  | case -EPROBE_DEFER: | 
|  | put_device(codec_dev); | 
|  | return ret_val; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | put_device(codec_dev); | 
|  |  | 
|  | log_quirks(&pdev->dev); | 
|  |  | 
|  | if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) || | 
|  | (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) | 
|  | byt_rt5651_dais[dai_index].codecs->dai_name = "rt5651-aif2"; | 
|  |  | 
|  | if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || | 
|  | (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) | 
|  | byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port"; | 
|  |  | 
|  | if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { | 
|  | priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); | 
|  | if (IS_ERR(priv->mclk)) { | 
|  | ret_val = PTR_ERR(priv->mclk); | 
|  | dev_err(&pdev->dev, | 
|  | "Failed to get MCLK from pmc_plt_clk_3: %d\n", | 
|  | ret_val); | 
|  | /* | 
|  | * Fall back to bit clock usage for -ENOENT (clock not | 
|  | * available likely due to missing dependencies), bail | 
|  | * for all other errors, including -EPROBE_DEFER | 
|  | */ | 
|  | if (ret_val != -ENOENT) | 
|  | return ret_val; | 
|  | byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; | 
|  | } | 
|  | } | 
|  |  | 
|  | snprintf(byt_rt5651_components, sizeof(byt_rt5651_components), | 
|  | "cfg-spk:%s cfg-mic:%s%s", | 
|  | (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? "1" : "2", | 
|  | mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], | 
|  | (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? | 
|  | " cfg-hp:lrswap" : ""); | 
|  | byt_rt5651_card.components = byt_rt5651_components; | 
|  | #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) | 
|  | snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), | 
|  | "bytcr-rt5651-%s-spk-%s-mic%s", | 
|  | (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? | 
|  | "mono" : "stereo", | 
|  | mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], | 
|  | (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? | 
|  | "-hp-swapped" : ""); | 
|  | byt_rt5651_card.long_name = byt_rt5651_long_name; | 
|  | #endif | 
|  |  | 
|  | /* override plaform name, if required */ | 
|  | platform_name = mach->mach_params.platform; | 
|  |  | 
|  | ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5651_card, | 
|  | platform_name); | 
|  | if (ret_val) | 
|  | return ret_val; | 
|  |  | 
|  | ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); | 
|  |  | 
|  | if (ret_val) { | 
|  | dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", | 
|  | ret_val); | 
|  | return ret_val; | 
|  | } | 
|  | platform_set_drvdata(pdev, &byt_rt5651_card); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | static struct platform_driver snd_byt_rt5651_mc_driver = { | 
|  | .driver = { | 
|  | .name = "bytcr_rt5651", | 
|  | #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) | 
|  | .pm = &snd_soc_pm_ops, | 
|  | #endif | 
|  | }, | 
|  | .probe = snd_byt_rt5651_mc_probe, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(snd_byt_rt5651_mc_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651"); | 
|  | MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:bytcr_rt5651"); |