| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * TQ-Systems PLD MFD core driver, based on vendor driver by |
| * Vadim V.Vlasov <vvlasov@dev.rtsoft.ru> |
| * |
| * Copyright (c) 2015 TQ-Systems GmbH |
| * Copyright (c) 2019 Andrew Lunn <andrew@lunn.ch> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/dmi.h> |
| #include <linux/i2c.h> |
| #include <linux/io.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/i2c-ocores.h> |
| #include <linux/platform_device.h> |
| |
| #define TQMX86_IOBASE 0x160 |
| #define TQMX86_IOSIZE 0x3f |
| #define TQMX86_IOBASE_I2C 0x1a0 |
| #define TQMX86_IOSIZE_I2C 0xa |
| #define TQMX86_IOBASE_WATCHDOG 0x18b |
| #define TQMX86_IOSIZE_WATCHDOG 0x2 |
| #define TQMX86_IOBASE_GPIO 0x18d |
| #define TQMX86_IOSIZE_GPIO 0x4 |
| |
| #define TQMX86_REG_BOARD_ID 0x20 |
| #define TQMX86_REG_BOARD_ID_E38M 1 |
| #define TQMX86_REG_BOARD_ID_50UC 2 |
| #define TQMX86_REG_BOARD_ID_E38C 3 |
| #define TQMX86_REG_BOARD_ID_60EB 4 |
| #define TQMX86_REG_BOARD_ID_E39M 5 |
| #define TQMX86_REG_BOARD_ID_E39C 6 |
| #define TQMX86_REG_BOARD_ID_E39x 7 |
| #define TQMX86_REG_BOARD_ID_70EB 8 |
| #define TQMX86_REG_BOARD_ID_80UC 9 |
| #define TQMX86_REG_BOARD_ID_90UC 10 |
| #define TQMX86_REG_BOARD_REV 0x21 |
| #define TQMX86_REG_IO_EXT_INT 0x26 |
| #define TQMX86_REG_IO_EXT_INT_NONE 0 |
| #define TQMX86_REG_IO_EXT_INT_7 1 |
| #define TQMX86_REG_IO_EXT_INT_9 2 |
| #define TQMX86_REG_IO_EXT_INT_12 3 |
| #define TQMX86_REG_IO_EXT_INT_MASK 0x3 |
| #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT 4 |
| |
| #define TQMX86_REG_I2C_DETECT 0x47 |
| #define TQMX86_REG_I2C_DETECT_SOFT 0xa5 |
| #define TQMX86_REG_I2C_INT_EN 0x49 |
| |
| static uint gpio_irq; |
| module_param(gpio_irq, uint, 0); |
| MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (7, 9, 12)"); |
| |
| static const struct resource tqmx_i2c_soft_resources[] = { |
| DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C), |
| }; |
| |
| static const struct resource tqmx_watchdog_resources[] = { |
| DEFINE_RES_IO(TQMX86_IOBASE_WATCHDOG, TQMX86_IOSIZE_WATCHDOG), |
| }; |
| |
| /* |
| * The IRQ resource must be first, since it is updated with the |
| * configured IRQ in the probe function. |
| */ |
| static struct resource tqmx_gpio_resources[] = { |
| DEFINE_RES_IRQ(0), |
| DEFINE_RES_IO(TQMX86_IOBASE_GPIO, TQMX86_IOSIZE_GPIO), |
| }; |
| |
| static struct i2c_board_info tqmx86_i2c_devices[] = { |
| { |
| /* 4K EEPROM at 0x50 */ |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| }; |
| |
| static struct ocores_i2c_platform_data ocores_platfom_data = { |
| .num_devices = ARRAY_SIZE(tqmx86_i2c_devices), |
| .devices = tqmx86_i2c_devices, |
| }; |
| |
| static const struct mfd_cell tqmx86_i2c_soft_dev[] = { |
| { |
| .name = "ocores-i2c", |
| .platform_data = &ocores_platfom_data, |
| .pdata_size = sizeof(ocores_platfom_data), |
| .resources = tqmx_i2c_soft_resources, |
| .num_resources = ARRAY_SIZE(tqmx_i2c_soft_resources), |
| }, |
| }; |
| |
| static const struct mfd_cell tqmx86_devs[] = { |
| { |
| .name = "tqmx86-wdt", |
| .resources = tqmx_watchdog_resources, |
| .num_resources = ARRAY_SIZE(tqmx_watchdog_resources), |
| .ignore_resource_conflicts = true, |
| }, |
| { |
| .name = "tqmx86-gpio", |
| .resources = tqmx_gpio_resources, |
| .num_resources = ARRAY_SIZE(tqmx_gpio_resources), |
| .ignore_resource_conflicts = true, |
| }, |
| }; |
| |
| static const char *tqmx86_board_id_to_name(u8 board_id) |
| { |
| switch (board_id) { |
| case TQMX86_REG_BOARD_ID_E38M: |
| return "TQMxE38M"; |
| case TQMX86_REG_BOARD_ID_50UC: |
| return "TQMx50UC"; |
| case TQMX86_REG_BOARD_ID_E38C: |
| return "TQMxE38C"; |
| case TQMX86_REG_BOARD_ID_60EB: |
| return "TQMx60EB"; |
| case TQMX86_REG_BOARD_ID_E39M: |
| return "TQMxE39M"; |
| case TQMX86_REG_BOARD_ID_E39C: |
| return "TQMxE39C"; |
| case TQMX86_REG_BOARD_ID_E39x: |
| return "TQMxE39x"; |
| case TQMX86_REG_BOARD_ID_70EB: |
| return "TQMx70EB"; |
| case TQMX86_REG_BOARD_ID_80UC: |
| return "TQMx80UC"; |
| case TQMX86_REG_BOARD_ID_90UC: |
| return "TQMx90UC"; |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| static int tqmx86_board_id_to_clk_rate(u8 board_id) |
| { |
| switch (board_id) { |
| case TQMX86_REG_BOARD_ID_50UC: |
| case TQMX86_REG_BOARD_ID_60EB: |
| case TQMX86_REG_BOARD_ID_70EB: |
| case TQMX86_REG_BOARD_ID_80UC: |
| case TQMX86_REG_BOARD_ID_90UC: |
| return 24000; |
| case TQMX86_REG_BOARD_ID_E39M: |
| case TQMX86_REG_BOARD_ID_E39C: |
| case TQMX86_REG_BOARD_ID_E39x: |
| return 25000; |
| case TQMX86_REG_BOARD_ID_E38M: |
| case TQMX86_REG_BOARD_ID_E38C: |
| return 33000; |
| default: |
| return 0; |
| } |
| } |
| |
| static int tqmx86_probe(struct platform_device *pdev) |
| { |
| u8 board_id, rev, i2c_det, io_ext_int_val; |
| struct device *dev = &pdev->dev; |
| u8 gpio_irq_cfg, readback; |
| const char *board_name; |
| void __iomem *io_base; |
| int err; |
| |
| switch (gpio_irq) { |
| case 0: |
| gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_NONE; |
| break; |
| case 7: |
| gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_7; |
| break; |
| case 9: |
| gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_9; |
| break; |
| case 12: |
| gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_12; |
| break; |
| default: |
| pr_err("tqmx86: Invalid GPIO IRQ (%d)\n", gpio_irq); |
| return -EINVAL; |
| } |
| |
| io_base = devm_ioport_map(dev, TQMX86_IOBASE, TQMX86_IOSIZE); |
| if (!io_base) |
| return -ENOMEM; |
| |
| board_id = ioread8(io_base + TQMX86_REG_BOARD_ID); |
| board_name = tqmx86_board_id_to_name(board_id); |
| rev = ioread8(io_base + TQMX86_REG_BOARD_REV); |
| |
| dev_info(dev, |
| "Found %s - Board ID %d, PCB Revision %d, PLD Revision %d\n", |
| board_name, board_id, rev >> 4, rev & 0xf); |
| |
| i2c_det = ioread8(io_base + TQMX86_REG_I2C_DETECT); |
| |
| if (gpio_irq_cfg) { |
| io_ext_int_val = |
| gpio_irq_cfg << TQMX86_REG_IO_EXT_INT_GPIO_SHIFT; |
| iowrite8(io_ext_int_val, io_base + TQMX86_REG_IO_EXT_INT); |
| readback = ioread8(io_base + TQMX86_REG_IO_EXT_INT); |
| if (readback != io_ext_int_val) { |
| dev_warn(dev, "GPIO interrupts not supported.\n"); |
| return -EINVAL; |
| } |
| |
| /* Assumes the IRQ resource is first. */ |
| tqmx_gpio_resources[0].start = gpio_irq; |
| } else { |
| tqmx_gpio_resources[0].flags = 0; |
| } |
| |
| ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id); |
| |
| if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) { |
| err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, |
| tqmx86_i2c_soft_dev, |
| ARRAY_SIZE(tqmx86_i2c_soft_dev), |
| NULL, 0, NULL); |
| if (err) |
| return err; |
| } |
| |
| return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, |
| tqmx86_devs, |
| ARRAY_SIZE(tqmx86_devs), |
| NULL, 0, NULL); |
| } |
| |
| static int tqmx86_create_platform_device(const struct dmi_system_id *id) |
| { |
| struct platform_device *pdev; |
| int err; |
| |
| pdev = platform_device_alloc("tqmx86", -1); |
| if (!pdev) |
| return -ENOMEM; |
| |
| err = platform_device_add(pdev); |
| if (err) |
| platform_device_put(pdev); |
| |
| return err; |
| } |
| |
| static const struct dmi_system_id tqmx86_dmi_table[] __initconst = { |
| { |
| .ident = "TQMX86", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "TQ-Group"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "TQMx"), |
| }, |
| .callback = tqmx86_create_platform_device, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(dmi, tqmx86_dmi_table); |
| |
| static struct platform_driver tqmx86_driver = { |
| .driver = { |
| .name = "tqmx86", |
| }, |
| .probe = tqmx86_probe, |
| }; |
| |
| static int __init tqmx86_init(void) |
| { |
| if (!dmi_check_system(tqmx86_dmi_table)) |
| return -ENODEV; |
| |
| return platform_driver_register(&tqmx86_driver); |
| } |
| |
| module_init(tqmx86_init); |
| |
| MODULE_DESCRIPTION("TQMx86 PLD Core Driver"); |
| MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:tqmx86"); |