| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  *  drivers/cpufreq/cpufreq_ondemand.c | 
 |  * | 
 |  *  Copyright (C)  2001 Russell King | 
 |  *            (C)  2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. | 
 |  *                      Jun Nakajima <jun.nakajima@intel.com> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/cpu.h> | 
 | #include <linux/percpu-defs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/tick.h> | 
 | #include <linux/sched/cpufreq.h> | 
 |  | 
 | #include "cpufreq_ondemand.h" | 
 |  | 
 | /* On-demand governor macros */ | 
 | #define DEF_FREQUENCY_UP_THRESHOLD		(80) | 
 | #define DEF_SAMPLING_DOWN_FACTOR		(1) | 
 | #define MAX_SAMPLING_DOWN_FACTOR		(100000) | 
 | #define MICRO_FREQUENCY_UP_THRESHOLD		(95) | 
 | #define MICRO_FREQUENCY_MIN_SAMPLE_RATE		(10000) | 
 | #define MIN_FREQUENCY_UP_THRESHOLD		(1) | 
 | #define MAX_FREQUENCY_UP_THRESHOLD		(100) | 
 |  | 
 | static struct od_ops od_ops; | 
 |  | 
 | static unsigned int default_powersave_bias; | 
 |  | 
 | /* | 
 |  * Not all CPUs want IO time to be accounted as busy; this depends on how | 
 |  * efficient idling at a higher frequency/voltage is. | 
 |  * Pavel Machek says this is not so for various generations of AMD and old | 
 |  * Intel systems. | 
 |  * Mike Chan (android.com) claims this is also not true for ARM. | 
 |  * Because of this, whitelist specific known (series) of CPUs by default, and | 
 |  * leave all others up to the user. | 
 |  */ | 
 | static int should_io_be_busy(void) | 
 | { | 
 | #if defined(CONFIG_X86) | 
 | 	/* | 
 | 	 * For Intel, Core 2 (model 15) and later have an efficient idle. | 
 | 	 */ | 
 | 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && | 
 | 			boot_cpu_data.x86 == 6 && | 
 | 			boot_cpu_data.x86_model >= 15) | 
 | 		return 1; | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Find right freq to be set now with powersave_bias on. | 
 |  * Returns the freq_hi to be used right now and will set freq_hi_delay_us, | 
 |  * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs. | 
 |  */ | 
 | static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, | 
 | 		unsigned int freq_next, unsigned int relation) | 
 | { | 
 | 	unsigned int freq_req, freq_reduc, freq_avg; | 
 | 	unsigned int freq_hi, freq_lo; | 
 | 	unsigned int index; | 
 | 	unsigned int delay_hi_us; | 
 | 	struct policy_dbs_info *policy_dbs = policy->governor_data; | 
 | 	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | 
 | 	struct dbs_data *dbs_data = policy_dbs->dbs_data; | 
 | 	struct od_dbs_tuners *od_tuners = dbs_data->tuners; | 
 | 	struct cpufreq_frequency_table *freq_table = policy->freq_table; | 
 |  | 
 | 	if (!freq_table) { | 
 | 		dbs_info->freq_lo = 0; | 
 | 		dbs_info->freq_lo_delay_us = 0; | 
 | 		return freq_next; | 
 | 	} | 
 |  | 
 | 	index = cpufreq_frequency_table_target(policy, freq_next, relation); | 
 | 	freq_req = freq_table[index].frequency; | 
 | 	freq_reduc = freq_req * od_tuners->powersave_bias / 1000; | 
 | 	freq_avg = freq_req - freq_reduc; | 
 |  | 
 | 	/* Find freq bounds for freq_avg in freq_table */ | 
 | 	index = cpufreq_table_find_index_h(policy, freq_avg, | 
 | 					   relation & CPUFREQ_RELATION_E); | 
 | 	freq_lo = freq_table[index].frequency; | 
 | 	index = cpufreq_table_find_index_l(policy, freq_avg, | 
 | 					   relation & CPUFREQ_RELATION_E); | 
 | 	freq_hi = freq_table[index].frequency; | 
 |  | 
 | 	/* Find out how long we have to be in hi and lo freqs */ | 
 | 	if (freq_hi == freq_lo) { | 
 | 		dbs_info->freq_lo = 0; | 
 | 		dbs_info->freq_lo_delay_us = 0; | 
 | 		return freq_lo; | 
 | 	} | 
 | 	delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate; | 
 | 	delay_hi_us += (freq_hi - freq_lo) / 2; | 
 | 	delay_hi_us /= freq_hi - freq_lo; | 
 | 	dbs_info->freq_hi_delay_us = delay_hi_us; | 
 | 	dbs_info->freq_lo = freq_lo; | 
 | 	dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us; | 
 | 	return freq_hi; | 
 | } | 
 |  | 
 | static void ondemand_powersave_bias_init(struct cpufreq_policy *policy) | 
 | { | 
 | 	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); | 
 |  | 
 | 	dbs_info->freq_lo = 0; | 
 | } | 
 |  | 
 | static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) | 
 | { | 
 | 	struct policy_dbs_info *policy_dbs = policy->governor_data; | 
 | 	struct dbs_data *dbs_data = policy_dbs->dbs_data; | 
 | 	struct od_dbs_tuners *od_tuners = dbs_data->tuners; | 
 |  | 
 | 	if (od_tuners->powersave_bias) | 
 | 		freq = od_ops.powersave_bias_target(policy, freq, | 
 | 						    CPUFREQ_RELATION_HE); | 
 | 	else if (policy->cur == policy->max) | 
 | 		return; | 
 |  | 
 | 	__cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? | 
 | 			CPUFREQ_RELATION_LE : CPUFREQ_RELATION_HE); | 
 | } | 
 |  | 
 | /* | 
 |  * Every sampling_rate, we check, if current idle time is less than 20% | 
 |  * (default), then we try to increase frequency. Else, we adjust the frequency | 
 |  * proportional to load. | 
 |  */ | 
 | static void od_update(struct cpufreq_policy *policy) | 
 | { | 
 | 	struct policy_dbs_info *policy_dbs = policy->governor_data; | 
 | 	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | 
 | 	struct dbs_data *dbs_data = policy_dbs->dbs_data; | 
 | 	struct od_dbs_tuners *od_tuners = dbs_data->tuners; | 
 | 	unsigned int load = dbs_update(policy); | 
 |  | 
 | 	dbs_info->freq_lo = 0; | 
 |  | 
 | 	/* Check for frequency increase */ | 
 | 	if (load > dbs_data->up_threshold) { | 
 | 		/* If switching to max speed, apply sampling_down_factor */ | 
 | 		if (policy->cur < policy->max) | 
 | 			policy_dbs->rate_mult = dbs_data->sampling_down_factor; | 
 | 		dbs_freq_increase(policy, policy->max); | 
 | 	} else { | 
 | 		/* Calculate the next frequency proportional to load */ | 
 | 		unsigned int freq_next, min_f, max_f; | 
 |  | 
 | 		min_f = policy->cpuinfo.min_freq; | 
 | 		max_f = policy->cpuinfo.max_freq; | 
 | 		freq_next = min_f + load * (max_f - min_f) / 100; | 
 |  | 
 | 		/* No longer fully busy, reset rate_mult */ | 
 | 		policy_dbs->rate_mult = 1; | 
 |  | 
 | 		if (od_tuners->powersave_bias) | 
 | 			freq_next = od_ops.powersave_bias_target(policy, | 
 | 								 freq_next, | 
 | 								 CPUFREQ_RELATION_LE); | 
 |  | 
 | 		__cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_CE); | 
 | 	} | 
 | } | 
 |  | 
 | static unsigned int od_dbs_update(struct cpufreq_policy *policy) | 
 | { | 
 | 	struct policy_dbs_info *policy_dbs = policy->governor_data; | 
 | 	struct dbs_data *dbs_data = policy_dbs->dbs_data; | 
 | 	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); | 
 | 	int sample_type = dbs_info->sample_type; | 
 |  | 
 | 	/* Common NORMAL_SAMPLE setup */ | 
 | 	dbs_info->sample_type = OD_NORMAL_SAMPLE; | 
 | 	/* | 
 | 	 * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore | 
 | 	 * it then. | 
 | 	 */ | 
 | 	if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) { | 
 | 		__cpufreq_driver_target(policy, dbs_info->freq_lo, | 
 | 					CPUFREQ_RELATION_HE); | 
 | 		return dbs_info->freq_lo_delay_us; | 
 | 	} | 
 |  | 
 | 	od_update(policy); | 
 |  | 
 | 	if (dbs_info->freq_lo) { | 
 | 		/* Setup SUB_SAMPLE */ | 
 | 		dbs_info->sample_type = OD_SUB_SAMPLE; | 
 | 		return dbs_info->freq_hi_delay_us; | 
 | 	} | 
 |  | 
 | 	return dbs_data->sampling_rate * policy_dbs->rate_mult; | 
 | } | 
 |  | 
 | /************************** sysfs interface ************************/ | 
 | static struct dbs_governor od_dbs_gov; | 
 |  | 
 | static ssize_t io_is_busy_store(struct gov_attr_set *attr_set, const char *buf, | 
 | 				size_t count) | 
 | { | 
 | 	struct dbs_data *dbs_data = to_dbs_data(attr_set); | 
 | 	unsigned int input; | 
 | 	int ret; | 
 |  | 
 | 	ret = sscanf(buf, "%u", &input); | 
 | 	if (ret != 1) | 
 | 		return -EINVAL; | 
 | 	dbs_data->io_is_busy = !!input; | 
 |  | 
 | 	/* we need to re-evaluate prev_cpu_idle */ | 
 | 	gov_update_cpu_data(dbs_data); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t up_threshold_store(struct gov_attr_set *attr_set, | 
 | 				  const char *buf, size_t count) | 
 | { | 
 | 	struct dbs_data *dbs_data = to_dbs_data(attr_set); | 
 | 	unsigned int input; | 
 | 	int ret; | 
 | 	ret = sscanf(buf, "%u", &input); | 
 |  | 
 | 	if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || | 
 | 			input < MIN_FREQUENCY_UP_THRESHOLD) { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	dbs_data->up_threshold = input; | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t sampling_down_factor_store(struct gov_attr_set *attr_set, | 
 | 					  const char *buf, size_t count) | 
 | { | 
 | 	struct dbs_data *dbs_data = to_dbs_data(attr_set); | 
 | 	struct policy_dbs_info *policy_dbs; | 
 | 	unsigned int input; | 
 | 	int ret; | 
 | 	ret = sscanf(buf, "%u", &input); | 
 |  | 
 | 	if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	dbs_data->sampling_down_factor = input; | 
 |  | 
 | 	/* Reset down sampling multiplier in case it was active */ | 
 | 	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { | 
 | 		/* | 
 | 		 * Doing this without locking might lead to using different | 
 | 		 * rate_mult values in od_update() and od_dbs_update(). | 
 | 		 */ | 
 | 		mutex_lock(&policy_dbs->update_mutex); | 
 | 		policy_dbs->rate_mult = 1; | 
 | 		mutex_unlock(&policy_dbs->update_mutex); | 
 | 	} | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t ignore_nice_load_store(struct gov_attr_set *attr_set, | 
 | 				      const char *buf, size_t count) | 
 | { | 
 | 	struct dbs_data *dbs_data = to_dbs_data(attr_set); | 
 | 	unsigned int input; | 
 | 	int ret; | 
 |  | 
 | 	ret = sscanf(buf, "%u", &input); | 
 | 	if (ret != 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (input > 1) | 
 | 		input = 1; | 
 |  | 
 | 	if (input == dbs_data->ignore_nice_load) { /* nothing to do */ | 
 | 		return count; | 
 | 	} | 
 | 	dbs_data->ignore_nice_load = input; | 
 |  | 
 | 	/* we need to re-evaluate prev_cpu_idle */ | 
 | 	gov_update_cpu_data(dbs_data); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t powersave_bias_store(struct gov_attr_set *attr_set, | 
 | 				    const char *buf, size_t count) | 
 | { | 
 | 	struct dbs_data *dbs_data = to_dbs_data(attr_set); | 
 | 	struct od_dbs_tuners *od_tuners = dbs_data->tuners; | 
 | 	struct policy_dbs_info *policy_dbs; | 
 | 	unsigned int input; | 
 | 	int ret; | 
 | 	ret = sscanf(buf, "%u", &input); | 
 |  | 
 | 	if (ret != 1) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (input > 1000) | 
 | 		input = 1000; | 
 |  | 
 | 	od_tuners->powersave_bias = input; | 
 |  | 
 | 	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) | 
 | 		ondemand_powersave_bias_init(policy_dbs->policy); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | gov_show_one_common(sampling_rate); | 
 | gov_show_one_common(up_threshold); | 
 | gov_show_one_common(sampling_down_factor); | 
 | gov_show_one_common(ignore_nice_load); | 
 | gov_show_one_common(io_is_busy); | 
 | gov_show_one(od, powersave_bias); | 
 |  | 
 | gov_attr_rw(sampling_rate); | 
 | gov_attr_rw(io_is_busy); | 
 | gov_attr_rw(up_threshold); | 
 | gov_attr_rw(sampling_down_factor); | 
 | gov_attr_rw(ignore_nice_load); | 
 | gov_attr_rw(powersave_bias); | 
 |  | 
 | static struct attribute *od_attrs[] = { | 
 | 	&sampling_rate.attr, | 
 | 	&up_threshold.attr, | 
 | 	&sampling_down_factor.attr, | 
 | 	&ignore_nice_load.attr, | 
 | 	&powersave_bias.attr, | 
 | 	&io_is_busy.attr, | 
 | 	NULL | 
 | }; | 
 | ATTRIBUTE_GROUPS(od); | 
 |  | 
 | /************************** sysfs end ************************/ | 
 |  | 
 | static struct policy_dbs_info *od_alloc(void) | 
 | { | 
 | 	struct od_policy_dbs_info *dbs_info; | 
 |  | 
 | 	dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); | 
 | 	return dbs_info ? &dbs_info->policy_dbs : NULL; | 
 | } | 
 |  | 
 | static void od_free(struct policy_dbs_info *policy_dbs) | 
 | { | 
 | 	kfree(to_dbs_info(policy_dbs)); | 
 | } | 
 |  | 
 | static int od_init(struct dbs_data *dbs_data) | 
 | { | 
 | 	struct od_dbs_tuners *tuners; | 
 | 	u64 idle_time; | 
 | 	int cpu; | 
 |  | 
 | 	tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); | 
 | 	if (!tuners) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	cpu = get_cpu(); | 
 | 	idle_time = get_cpu_idle_time_us(cpu, NULL); | 
 | 	put_cpu(); | 
 | 	if (idle_time != -1ULL) { | 
 | 		/* Idle micro accounting is supported. Use finer thresholds */ | 
 | 		dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; | 
 | 	} else { | 
 | 		dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; | 
 | 	} | 
 |  | 
 | 	dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; | 
 | 	dbs_data->ignore_nice_load = 0; | 
 | 	tuners->powersave_bias = default_powersave_bias; | 
 | 	dbs_data->io_is_busy = should_io_be_busy(); | 
 |  | 
 | 	dbs_data->tuners = tuners; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void od_exit(struct dbs_data *dbs_data) | 
 | { | 
 | 	kfree(dbs_data->tuners); | 
 | } | 
 |  | 
 | static void od_start(struct cpufreq_policy *policy) | 
 | { | 
 | 	struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); | 
 |  | 
 | 	dbs_info->sample_type = OD_NORMAL_SAMPLE; | 
 | 	ondemand_powersave_bias_init(policy); | 
 | } | 
 |  | 
 | static struct od_ops od_ops = { | 
 | 	.powersave_bias_target = generic_powersave_bias_target, | 
 | }; | 
 |  | 
 | static struct dbs_governor od_dbs_gov = { | 
 | 	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), | 
 | 	.kobj_type = { .default_groups = od_groups }, | 
 | 	.gov_dbs_update = od_dbs_update, | 
 | 	.alloc = od_alloc, | 
 | 	.free = od_free, | 
 | 	.init = od_init, | 
 | 	.exit = od_exit, | 
 | 	.start = od_start, | 
 | }; | 
 |  | 
 | #define CPU_FREQ_GOV_ONDEMAND	(od_dbs_gov.gov) | 
 |  | 
 | static void od_set_powersave_bias(unsigned int powersave_bias) | 
 | { | 
 | 	unsigned int cpu; | 
 | 	cpumask_var_t done; | 
 |  | 
 | 	if (!alloc_cpumask_var(&done, GFP_KERNEL)) | 
 | 		return; | 
 |  | 
 | 	default_powersave_bias = powersave_bias; | 
 | 	cpumask_clear(done); | 
 |  | 
 | 	cpus_read_lock(); | 
 | 	for_each_online_cpu(cpu) { | 
 | 		struct cpufreq_policy *policy; | 
 | 		struct policy_dbs_info *policy_dbs; | 
 | 		struct dbs_data *dbs_data; | 
 | 		struct od_dbs_tuners *od_tuners; | 
 |  | 
 | 		if (cpumask_test_cpu(cpu, done)) | 
 | 			continue; | 
 |  | 
 | 		policy = cpufreq_cpu_get_raw(cpu); | 
 | 		if (!policy || policy->governor != &CPU_FREQ_GOV_ONDEMAND) | 
 | 			continue; | 
 |  | 
 | 		policy_dbs = policy->governor_data; | 
 | 		if (!policy_dbs) | 
 | 			continue; | 
 |  | 
 | 		cpumask_or(done, done, policy->cpus); | 
 |  | 
 | 		dbs_data = policy_dbs->dbs_data; | 
 | 		od_tuners = dbs_data->tuners; | 
 | 		od_tuners->powersave_bias = default_powersave_bias; | 
 | 	} | 
 | 	cpus_read_unlock(); | 
 |  | 
 | 	free_cpumask_var(done); | 
 | } | 
 |  | 
 | void od_register_powersave_bias_handler(unsigned int (*f) | 
 | 		(struct cpufreq_policy *, unsigned int, unsigned int), | 
 | 		unsigned int powersave_bias) | 
 | { | 
 | 	od_ops.powersave_bias_target = f; | 
 | 	od_set_powersave_bias(powersave_bias); | 
 | } | 
 | EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); | 
 |  | 
 | void od_unregister_powersave_bias_handler(void) | 
 | { | 
 | 	od_ops.powersave_bias_target = generic_powersave_bias_target; | 
 | 	od_set_powersave_bias(0); | 
 | } | 
 | EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); | 
 |  | 
 | MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); | 
 | MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); | 
 | MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " | 
 | 	"Low Latency Frequency Transition capable processors"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND | 
 | struct cpufreq_governor *cpufreq_default_governor(void) | 
 | { | 
 | 	return &CPU_FREQ_GOV_ONDEMAND; | 
 | } | 
 | #endif | 
 |  | 
 | cpufreq_governor_init(CPU_FREQ_GOV_ONDEMAND); | 
 | cpufreq_governor_exit(CPU_FREQ_GOV_ONDEMAND); |