blob: 46e96756cfe10c7ca8448d52fb07c0ffb03d8673 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Old U-boot compatibility for Acadia
*
* Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* Copyright 2008 IBM Corporation
*/
#include "ops.h"
#include "io.h"
#include "dcr.h"
#include "stdio.h"
#include "4xx.h"
#include "44x.h"
#include "cuboot.h"
#define TARGET_4xx
#include "ppcboot.h"
static bd_t bd;
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
static void get_clocks(void)
{
unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i;
unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv;
unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB;
unsigned long div; /* total divisor udiv * bdiv */
unsigned long umin; /* minimum udiv */
unsigned short diff; /* smallest diff */
unsigned long udiv; /* best udiv */
unsigned short idiff; /* current diff */
unsigned short ibdiv; /* current bdiv */
unsigned long est; /* current estimate */
unsigned long baud;
void *np;
/* read the sysclk value from the CPLD */
sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000;
/*
* Read PLL Mode registers
*/
cpr_plld = CPR0_READ(DCRN_CPR0_PLLD);
cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC);
/*
* Determine forward divider A
*/
pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
/*
* Determine forward divider B
*/
pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
if (pllFwdDivB == 0)
pllFwdDivB = 8;
/*
* Determine FBK_DIV.
*/
pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
if (pllFbkDiv == 0)
pllFbkDiv = 256;
/*
* Read CPR_PRIMAD register
*/
cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD);
/*
* Determine PLB_DIV.
*/
pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
if (pllPlbDiv == 0)
pllPlbDiv = 16;
/*
* Determine EXTBUS_DIV.
*/
pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
if (pllExtBusDiv == 0)
pllExtBusDiv = 16;
/*
* Determine OPB_DIV.
*/
pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
if (pllOpbDiv == 0)
pllOpbDiv = 16;
/* There is a bug in U-Boot that prevents us from using
* bd.bi_opbfreq because U-Boot doesn't populate it for
* 405EZ. We get to calculate it, yay!
*/
freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv;
freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv;
plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ?
pllFwdDivB : pllFwdDiv) *
pllFbkDiv) / pllFwdDivB);
np = find_node_by_alias("serial0");
if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud))
fatal("no current-speed property\n\r");
udiv = 256; /* Assume lowest possible serial clk */
div = plloutb / (16 * baud); /* total divisor */
umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */
diff = 256; /* highest possible */
/* i is the test udiv value -- start with the largest
* possible (256) to minimize serial clock and constrain
* search to umin.
*/
for (i = 256; i > umin; i--) {
ibdiv = div / i;
est = i * ibdiv;
idiff = (est > div) ? (est-div) : (div-est);
if (idiff == 0) {
udiv = i;
break; /* can't do better */
} else if (idiff < diff) {
udiv = i; /* best so far */
diff = idiff; /* update lowest diff*/
}
}
freqUART = plloutb / udiv;
dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq);
dt_fixup_clock("/plb/ebc", freqEBC);
dt_fixup_clock("/plb/opb", freqOPB);
dt_fixup_clock("/plb/opb/serial@ef600300", freqUART);
dt_fixup_clock("/plb/opb/serial@ef600400", freqUART);
}
static void acadia_fixups(void)
{
dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
get_clocks();
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
CUBOOT_INIT();
platform_ops.fixups = acadia_fixups;
platform_ops.exit = ibm40x_dbcr_reset;
fdt_init(_dtb_start);
serial_console_init();
}