| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2008 Oracle. All rights reserved. | |
| * | |
| * Based on jffs2 zlib code: | |
| * Copyright © 2001-2007 Red Hat, Inc. | |
| * Created by David Woodhouse <dwmw2@infradead.org> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/zlib.h> | |
| #include <linux/zutil.h> | |
| #include <linux/mm.h> | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/sched.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/bio.h> | |
| #include <linux/refcount.h> | |
| #include "btrfs_inode.h" | |
| #include "compression.h" | |
| /* workspace buffer size for s390 zlib hardware support */ | |
| #define ZLIB_DFLTCC_BUF_SIZE (4 * PAGE_SIZE) | |
| struct workspace { | |
| z_stream strm; | |
| char *buf; | |
| unsigned int buf_size; | |
| struct list_head list; | |
| int level; | |
| }; | |
| static struct workspace_manager wsm; | |
| struct list_head *zlib_get_workspace(unsigned int level) | |
| { | |
| struct list_head *ws = btrfs_get_workspace(BTRFS_COMPRESS_ZLIB, level); | |
| struct workspace *workspace = list_entry(ws, struct workspace, list); | |
| workspace->level = level; | |
| return ws; | |
| } | |
| void zlib_free_workspace(struct list_head *ws) | |
| { | |
| struct workspace *workspace = list_entry(ws, struct workspace, list); | |
| kvfree(workspace->strm.workspace); | |
| kfree(workspace->buf); | |
| kfree(workspace); | |
| } | |
| struct list_head *zlib_alloc_workspace(unsigned int level) | |
| { | |
| struct workspace *workspace; | |
| int workspacesize; | |
| workspace = kzalloc(sizeof(*workspace), GFP_KERNEL); | |
| if (!workspace) | |
| return ERR_PTR(-ENOMEM); | |
| workspacesize = max(zlib_deflate_workspacesize(MAX_WBITS, MAX_MEM_LEVEL), | |
| zlib_inflate_workspacesize()); | |
| workspace->strm.workspace = kvzalloc(workspacesize, GFP_KERNEL | __GFP_NOWARN); | |
| workspace->level = level; | |
| workspace->buf = NULL; | |
| /* | |
| * In case of s390 zlib hardware support, allocate lager workspace | |
| * buffer. If allocator fails, fall back to a single page buffer. | |
| */ | |
| if (zlib_deflate_dfltcc_enabled()) { | |
| workspace->buf = kmalloc(ZLIB_DFLTCC_BUF_SIZE, | |
| __GFP_NOMEMALLOC | __GFP_NORETRY | | |
| __GFP_NOWARN | GFP_NOIO); | |
| workspace->buf_size = ZLIB_DFLTCC_BUF_SIZE; | |
| } | |
| if (!workspace->buf) { | |
| workspace->buf = kmalloc(PAGE_SIZE, GFP_KERNEL); | |
| workspace->buf_size = PAGE_SIZE; | |
| } | |
| if (!workspace->strm.workspace || !workspace->buf) | |
| goto fail; | |
| INIT_LIST_HEAD(&workspace->list); | |
| return &workspace->list; | |
| fail: | |
| zlib_free_workspace(&workspace->list); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| int zlib_compress_folios(struct list_head *ws, struct address_space *mapping, | |
| u64 start, struct folio **folios, unsigned long *out_folios, | |
| unsigned long *total_in, unsigned long *total_out) | |
| { | |
| struct workspace *workspace = list_entry(ws, struct workspace, list); | |
| int ret; | |
| char *data_in = NULL; | |
| char *cfolio_out; | |
| int nr_folios = 0; | |
| struct folio *in_folio = NULL; | |
| struct folio *out_folio = NULL; | |
| unsigned long bytes_left; | |
| unsigned int in_buf_folios; | |
| unsigned long len = *total_out; | |
| unsigned long nr_dest_folios = *out_folios; | |
| const unsigned long max_out = nr_dest_folios * PAGE_SIZE; | |
| *out_folios = 0; | |
| *total_out = 0; | |
| *total_in = 0; | |
| ret = zlib_deflateInit(&workspace->strm, workspace->level); | |
| if (unlikely(ret != Z_OK)) { | |
| struct btrfs_inode *inode = BTRFS_I(mapping->host); | |
| btrfs_err(inode->root->fs_info, | |
| "zlib compression init failed, error %d root %llu inode %llu offset %llu", | |
| ret, btrfs_root_id(inode->root), btrfs_ino(inode), start); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| workspace->strm.total_in = 0; | |
| workspace->strm.total_out = 0; | |
| out_folio = btrfs_alloc_compr_folio(); | |
| if (out_folio == NULL) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| cfolio_out = folio_address(out_folio); | |
| folios[0] = out_folio; | |
| nr_folios = 1; | |
| workspace->strm.next_in = workspace->buf; | |
| workspace->strm.avail_in = 0; | |
| workspace->strm.next_out = cfolio_out; | |
| workspace->strm.avail_out = PAGE_SIZE; | |
| while (workspace->strm.total_in < len) { | |
| /* | |
| * Get next input pages and copy the contents to | |
| * the workspace buffer if required. | |
| */ | |
| if (workspace->strm.avail_in == 0) { | |
| bytes_left = len - workspace->strm.total_in; | |
| in_buf_folios = min(DIV_ROUND_UP(bytes_left, PAGE_SIZE), | |
| workspace->buf_size / PAGE_SIZE); | |
| if (in_buf_folios > 1) { | |
| int i; | |
| for (i = 0; i < in_buf_folios; i++) { | |
| if (data_in) { | |
| kunmap_local(data_in); | |
| folio_put(in_folio); | |
| data_in = NULL; | |
| } | |
| ret = btrfs_compress_filemap_get_folio(mapping, | |
| start, &in_folio); | |
| if (ret < 0) | |
| goto out; | |
| data_in = kmap_local_folio(in_folio, 0); | |
| copy_page(workspace->buf + i * PAGE_SIZE, | |
| data_in); | |
| start += PAGE_SIZE; | |
| } | |
| workspace->strm.next_in = workspace->buf; | |
| } else { | |
| if (data_in) { | |
| kunmap_local(data_in); | |
| folio_put(in_folio); | |
| data_in = NULL; | |
| } | |
| ret = btrfs_compress_filemap_get_folio(mapping, | |
| start, &in_folio); | |
| if (ret < 0) | |
| goto out; | |
| data_in = kmap_local_folio(in_folio, 0); | |
| start += PAGE_SIZE; | |
| workspace->strm.next_in = data_in; | |
| } | |
| workspace->strm.avail_in = min(bytes_left, | |
| (unsigned long) workspace->buf_size); | |
| } | |
| ret = zlib_deflate(&workspace->strm, Z_SYNC_FLUSH); | |
| if (unlikely(ret != Z_OK)) { | |
| struct btrfs_inode *inode = BTRFS_I(mapping->host); | |
| btrfs_warn(inode->root->fs_info, | |
| "zlib compression failed, error %d root %llu inode %llu offset %llu", | |
| ret, btrfs_root_id(inode->root), btrfs_ino(inode), | |
| start); | |
| zlib_deflateEnd(&workspace->strm); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| /* we're making it bigger, give up */ | |
| if (workspace->strm.total_in > 8192 && | |
| workspace->strm.total_in < | |
| workspace->strm.total_out) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| /* we need another page for writing out. Test this | |
| * before the total_in so we will pull in a new page for | |
| * the stream end if required | |
| */ | |
| if (workspace->strm.avail_out == 0) { | |
| if (nr_folios == nr_dest_folios) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| out_folio = btrfs_alloc_compr_folio(); | |
| if (out_folio == NULL) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| cfolio_out = folio_address(out_folio); | |
| folios[nr_folios] = out_folio; | |
| nr_folios++; | |
| workspace->strm.avail_out = PAGE_SIZE; | |
| workspace->strm.next_out = cfolio_out; | |
| } | |
| /* we're all done */ | |
| if (workspace->strm.total_in >= len) | |
| break; | |
| if (workspace->strm.total_out > max_out) | |
| break; | |
| } | |
| workspace->strm.avail_in = 0; | |
| /* | |
| * Call deflate with Z_FINISH flush parameter providing more output | |
| * space but no more input data, until it returns with Z_STREAM_END. | |
| */ | |
| while (ret != Z_STREAM_END) { | |
| ret = zlib_deflate(&workspace->strm, Z_FINISH); | |
| if (ret == Z_STREAM_END) | |
| break; | |
| if (ret != Z_OK && ret != Z_BUF_ERROR) { | |
| zlib_deflateEnd(&workspace->strm); | |
| ret = -EIO; | |
| goto out; | |
| } else if (workspace->strm.avail_out == 0) { | |
| /* Get another folio for the stream end. */ | |
| if (nr_folios == nr_dest_folios) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| out_folio = btrfs_alloc_compr_folio(); | |
| if (out_folio == NULL) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| cfolio_out = folio_address(out_folio); | |
| folios[nr_folios] = out_folio; | |
| nr_folios++; | |
| workspace->strm.avail_out = PAGE_SIZE; | |
| workspace->strm.next_out = cfolio_out; | |
| } | |
| } | |
| zlib_deflateEnd(&workspace->strm); | |
| if (workspace->strm.total_out >= workspace->strm.total_in) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| ret = 0; | |
| *total_out = workspace->strm.total_out; | |
| *total_in = workspace->strm.total_in; | |
| out: | |
| *out_folios = nr_folios; | |
| if (data_in) { | |
| kunmap_local(data_in); | |
| folio_put(in_folio); | |
| } | |
| return ret; | |
| } | |
| int zlib_decompress_bio(struct list_head *ws, struct compressed_bio *cb) | |
| { | |
| struct workspace *workspace = list_entry(ws, struct workspace, list); | |
| int ret = 0, ret2; | |
| int wbits = MAX_WBITS; | |
| char *data_in; | |
| size_t total_out = 0; | |
| unsigned long folio_in_index = 0; | |
| size_t srclen = cb->compressed_len; | |
| unsigned long total_folios_in = DIV_ROUND_UP(srclen, PAGE_SIZE); | |
| unsigned long buf_start; | |
| struct folio **folios_in = cb->compressed_folios; | |
| data_in = kmap_local_folio(folios_in[folio_in_index], 0); | |
| workspace->strm.next_in = data_in; | |
| workspace->strm.avail_in = min_t(size_t, srclen, PAGE_SIZE); | |
| workspace->strm.total_in = 0; | |
| workspace->strm.total_out = 0; | |
| workspace->strm.next_out = workspace->buf; | |
| workspace->strm.avail_out = workspace->buf_size; | |
| /* If it's deflate, and it's got no preset dictionary, then | |
| we can tell zlib to skip the adler32 check. */ | |
| if (srclen > 2 && !(data_in[1] & PRESET_DICT) && | |
| ((data_in[0] & 0x0f) == Z_DEFLATED) && | |
| !(((data_in[0]<<8) + data_in[1]) % 31)) { | |
| wbits = -((data_in[0] >> 4) + 8); | |
| workspace->strm.next_in += 2; | |
| workspace->strm.avail_in -= 2; | |
| } | |
| ret = zlib_inflateInit2(&workspace->strm, wbits); | |
| if (unlikely(ret != Z_OK)) { | |
| struct btrfs_inode *inode = cb->bbio.inode; | |
| kunmap_local(data_in); | |
| btrfs_err(inode->root->fs_info, | |
| "zlib decompression init failed, error %d root %llu inode %llu offset %llu", | |
| ret, btrfs_root_id(inode->root), btrfs_ino(inode), cb->start); | |
| return -EIO; | |
| } | |
| while (workspace->strm.total_in < srclen) { | |
| ret = zlib_inflate(&workspace->strm, Z_NO_FLUSH); | |
| if (ret != Z_OK && ret != Z_STREAM_END) | |
| break; | |
| buf_start = total_out; | |
| total_out = workspace->strm.total_out; | |
| /* we didn't make progress in this inflate call, we're done */ | |
| if (buf_start == total_out) | |
| break; | |
| ret2 = btrfs_decompress_buf2page(workspace->buf, | |
| total_out - buf_start, cb, buf_start); | |
| if (ret2 == 0) { | |
| ret = 0; | |
| goto done; | |
| } | |
| workspace->strm.next_out = workspace->buf; | |
| workspace->strm.avail_out = workspace->buf_size; | |
| if (workspace->strm.avail_in == 0) { | |
| unsigned long tmp; | |
| kunmap_local(data_in); | |
| folio_in_index++; | |
| if (folio_in_index >= total_folios_in) { | |
| data_in = NULL; | |
| break; | |
| } | |
| data_in = kmap_local_folio(folios_in[folio_in_index], 0); | |
| workspace->strm.next_in = data_in; | |
| tmp = srclen - workspace->strm.total_in; | |
| workspace->strm.avail_in = min(tmp, PAGE_SIZE); | |
| } | |
| } | |
| if (unlikely(ret != Z_STREAM_END)) { | |
| btrfs_err(cb->bbio.inode->root->fs_info, | |
| "zlib decompression failed, error %d root %llu inode %llu offset %llu", | |
| ret, btrfs_root_id(cb->bbio.inode->root), | |
| btrfs_ino(cb->bbio.inode), cb->start); | |
| ret = -EIO; | |
| } else { | |
| ret = 0; | |
| } | |
| done: | |
| zlib_inflateEnd(&workspace->strm); | |
| if (data_in) | |
| kunmap_local(data_in); | |
| return ret; | |
| } | |
| int zlib_decompress(struct list_head *ws, const u8 *data_in, | |
| struct page *dest_page, unsigned long dest_pgoff, size_t srclen, | |
| size_t destlen) | |
| { | |
| struct workspace *workspace = list_entry(ws, struct workspace, list); | |
| int ret = 0; | |
| int wbits = MAX_WBITS; | |
| unsigned long to_copy; | |
| workspace->strm.next_in = data_in; | |
| workspace->strm.avail_in = srclen; | |
| workspace->strm.total_in = 0; | |
| workspace->strm.next_out = workspace->buf; | |
| workspace->strm.avail_out = workspace->buf_size; | |
| workspace->strm.total_out = 0; | |
| /* If it's deflate, and it's got no preset dictionary, then | |
| we can tell zlib to skip the adler32 check. */ | |
| if (srclen > 2 && !(data_in[1] & PRESET_DICT) && | |
| ((data_in[0] & 0x0f) == Z_DEFLATED) && | |
| !(((data_in[0]<<8) + data_in[1]) % 31)) { | |
| wbits = -((data_in[0] >> 4) + 8); | |
| workspace->strm.next_in += 2; | |
| workspace->strm.avail_in -= 2; | |
| } | |
| ret = zlib_inflateInit2(&workspace->strm, wbits); | |
| if (unlikely(ret != Z_OK)) { | |
| struct btrfs_inode *inode = BTRFS_I(dest_page->mapping->host); | |
| btrfs_err(inode->root->fs_info, | |
| "zlib decompression init failed, error %d root %llu inode %llu offset %llu", | |
| ret, btrfs_root_id(inode->root), btrfs_ino(inode), | |
| page_offset(dest_page)); | |
| return -EIO; | |
| } | |
| /* | |
| * Everything (in/out buf) should be at most one sector, there should | |
| * be no need to switch any input/output buffer. | |
| */ | |
| ret = zlib_inflate(&workspace->strm, Z_FINISH); | |
| to_copy = min(workspace->strm.total_out, destlen); | |
| if (ret != Z_STREAM_END) | |
| goto out; | |
| memcpy_to_page(dest_page, dest_pgoff, workspace->buf, to_copy); | |
| out: | |
| if (unlikely(to_copy != destlen)) { | |
| struct btrfs_inode *inode = BTRFS_I(dest_page->mapping->host); | |
| btrfs_err(inode->root->fs_info, | |
| "zlib decompression failed, error %d root %llu inode %llu offset %llu decompressed %lu expected %zu", | |
| ret, btrfs_root_id(inode->root), btrfs_ino(inode), | |
| page_offset(dest_page), to_copy, destlen); | |
| ret = -EIO; | |
| } else { | |
| ret = 0; | |
| } | |
| zlib_inflateEnd(&workspace->strm); | |
| if (unlikely(to_copy < destlen)) | |
| memzero_page(dest_page, dest_pgoff + to_copy, destlen - to_copy); | |
| return ret; | |
| } | |
| const struct btrfs_compress_op btrfs_zlib_compress = { | |
| .workspace_manager = &wsm, | |
| .max_level = 9, | |
| .default_level = BTRFS_ZLIB_DEFAULT_LEVEL, | |
| }; |