| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/common/sa1111.c |
| * |
| * SA1111 support |
| * |
| * Original code by John Dorsey |
| * |
| * This file contains all generic SA1111 support. |
| * |
| * All initialization functions provided here are intended to be called |
| * from machine specific code with proper arguments when required. |
| */ |
| #include <linux/module.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-map-ops.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| |
| #include <asm/mach/irq.h> |
| #include <asm/mach-types.h> |
| #include <linux/sizes.h> |
| |
| #include <asm/hardware/sa1111.h> |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| #include <mach/hardware.h> |
| #endif |
| |
| /* SA1111 IRQs */ |
| #define IRQ_GPAIN0 (0) |
| #define IRQ_GPAIN1 (1) |
| #define IRQ_GPAIN2 (2) |
| #define IRQ_GPAIN3 (3) |
| #define IRQ_GPBIN0 (4) |
| #define IRQ_GPBIN1 (5) |
| #define IRQ_GPBIN2 (6) |
| #define IRQ_GPBIN3 (7) |
| #define IRQ_GPBIN4 (8) |
| #define IRQ_GPBIN5 (9) |
| #define IRQ_GPCIN0 (10) |
| #define IRQ_GPCIN1 (11) |
| #define IRQ_GPCIN2 (12) |
| #define IRQ_GPCIN3 (13) |
| #define IRQ_GPCIN4 (14) |
| #define IRQ_GPCIN5 (15) |
| #define IRQ_GPCIN6 (16) |
| #define IRQ_GPCIN7 (17) |
| #define IRQ_MSTXINT (18) |
| #define IRQ_MSRXINT (19) |
| #define IRQ_MSSTOPERRINT (20) |
| #define IRQ_TPTXINT (21) |
| #define IRQ_TPRXINT (22) |
| #define IRQ_TPSTOPERRINT (23) |
| #define SSPXMTINT (24) |
| #define SSPRCVINT (25) |
| #define SSPROR (26) |
| #define AUDXMTDMADONEA (32) |
| #define AUDRCVDMADONEA (33) |
| #define AUDXMTDMADONEB (34) |
| #define AUDRCVDMADONEB (35) |
| #define AUDTFSR (36) |
| #define AUDRFSR (37) |
| #define AUDTUR (38) |
| #define AUDROR (39) |
| #define AUDDTS (40) |
| #define AUDRDD (41) |
| #define AUDSTO (42) |
| #define IRQ_USBPWR (43) |
| #define IRQ_HCIM (44) |
| #define IRQ_HCIBUFFACC (45) |
| #define IRQ_HCIRMTWKP (46) |
| #define IRQ_NHCIMFCIR (47) |
| #define IRQ_USB_PORT_RESUME (48) |
| #define IRQ_S0_READY_NINT (49) |
| #define IRQ_S1_READY_NINT (50) |
| #define IRQ_S0_CD_VALID (51) |
| #define IRQ_S1_CD_VALID (52) |
| #define IRQ_S0_BVD1_STSCHG (53) |
| #define IRQ_S1_BVD1_STSCHG (54) |
| #define SA1111_IRQ_NR (55) |
| |
| extern void sa1110_mb_enable(void); |
| extern void sa1110_mb_disable(void); |
| |
| /* |
| * We keep the following data for the overall SA1111. Note that the |
| * struct device and struct resource are "fake"; they should be supplied |
| * by the bus above us. However, in the interests of getting all SA1111 |
| * drivers converted over to the device model, we provide this as an |
| * anchor point for all the other drivers. |
| */ |
| struct sa1111 { |
| struct device *dev; |
| struct clk *clk; |
| unsigned long phys; |
| int irq; |
| int irq_base; /* base for cascaded on-chip IRQs */ |
| spinlock_t lock; |
| void __iomem *base; |
| struct sa1111_platform_data *pdata; |
| struct irq_domain *irqdomain; |
| struct gpio_chip gc; |
| #ifdef CONFIG_PM |
| void *saved_state; |
| #endif |
| }; |
| |
| /* |
| * We _really_ need to eliminate this. Its only users |
| * are the PWM and DMA checking code. |
| */ |
| static struct sa1111 *g_sa1111; |
| |
| struct sa1111_dev_info { |
| unsigned long offset; |
| unsigned long skpcr_mask; |
| bool dma; |
| unsigned int devid; |
| unsigned int hwirq[6]; |
| }; |
| |
| static struct sa1111_dev_info sa1111_devices[] = { |
| { |
| .offset = SA1111_USB, |
| .skpcr_mask = SKPCR_UCLKEN, |
| .dma = true, |
| .devid = SA1111_DEVID_USB, |
| .hwirq = { |
| IRQ_USBPWR, |
| IRQ_HCIM, |
| IRQ_HCIBUFFACC, |
| IRQ_HCIRMTWKP, |
| IRQ_NHCIMFCIR, |
| IRQ_USB_PORT_RESUME |
| }, |
| }, |
| { |
| .offset = 0x0600, |
| .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, |
| .dma = true, |
| .devid = SA1111_DEVID_SAC, |
| .hwirq = { |
| AUDXMTDMADONEA, |
| AUDXMTDMADONEB, |
| AUDRCVDMADONEA, |
| AUDRCVDMADONEB |
| }, |
| }, |
| { |
| .offset = 0x0800, |
| .skpcr_mask = SKPCR_SCLKEN, |
| .devid = SA1111_DEVID_SSP, |
| }, |
| { |
| .offset = SA1111_KBD, |
| .skpcr_mask = SKPCR_PTCLKEN, |
| .devid = SA1111_DEVID_PS2_KBD, |
| .hwirq = { |
| IRQ_TPRXINT, |
| IRQ_TPTXINT |
| }, |
| }, |
| { |
| .offset = SA1111_MSE, |
| .skpcr_mask = SKPCR_PMCLKEN, |
| .devid = SA1111_DEVID_PS2_MSE, |
| .hwirq = { |
| IRQ_MSRXINT, |
| IRQ_MSTXINT |
| }, |
| }, |
| { |
| .offset = 0x1800, |
| .skpcr_mask = 0, |
| .devid = SA1111_DEVID_PCMCIA, |
| .hwirq = { |
| IRQ_S0_READY_NINT, |
| IRQ_S0_CD_VALID, |
| IRQ_S0_BVD1_STSCHG, |
| IRQ_S1_READY_NINT, |
| IRQ_S1_CD_VALID, |
| IRQ_S1_BVD1_STSCHG, |
| }, |
| }, |
| }; |
| |
| static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq) |
| { |
| return irq_create_mapping(sachip->irqdomain, hwirq); |
| } |
| |
| /* |
| * SA1111 interrupt support. Since clearing an IRQ while there are |
| * active IRQs causes the interrupt output to pulse, the upper levels |
| * will call us again if there are more interrupts to process. |
| */ |
| static void sa1111_irq_handler(struct irq_desc *desc) |
| { |
| unsigned int stat0, stat1, i; |
| struct sa1111 *sachip = irq_desc_get_handler_data(desc); |
| struct irq_domain *irqdomain; |
| void __iomem *mapbase = sachip->base + SA1111_INTC; |
| |
| stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0); |
| stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1); |
| |
| writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0); |
| |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1); |
| |
| if (stat0 == 0 && stat1 == 0) { |
| do_bad_IRQ(desc); |
| return; |
| } |
| |
| irqdomain = sachip->irqdomain; |
| |
| for (i = 0; stat0; i++, stat0 >>= 1) |
| if (stat0 & 1) |
| generic_handle_domain_irq(irqdomain, i); |
| |
| for (i = 32; stat1; i++, stat1 >>= 1) |
| if (stat1 & 1) |
| generic_handle_domain_irq(irqdomain, i); |
| |
| /* For level-based interrupts */ |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); |
| } |
| |
| static u32 sa1111_irqmask(struct irq_data *d) |
| { |
| return BIT(irqd_to_hwirq(d) & 31); |
| } |
| |
| static int sa1111_irqbank(struct irq_data *d) |
| { |
| return (irqd_to_hwirq(d) / 32) * 4; |
| } |
| |
| static void sa1111_ack_irq(struct irq_data *d) |
| { |
| } |
| |
| static void sa1111_mask_irq(struct irq_data *d) |
| { |
| struct sa1111 *sachip = irq_data_get_irq_chip_data(d); |
| void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); |
| u32 ie; |
| |
| ie = readl_relaxed(mapbase + SA1111_INTEN0); |
| ie &= ~sa1111_irqmask(d); |
| writel(ie, mapbase + SA1111_INTEN0); |
| } |
| |
| static void sa1111_unmask_irq(struct irq_data *d) |
| { |
| struct sa1111 *sachip = irq_data_get_irq_chip_data(d); |
| void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); |
| u32 ie; |
| |
| ie = readl_relaxed(mapbase + SA1111_INTEN0); |
| ie |= sa1111_irqmask(d); |
| writel_relaxed(ie, mapbase + SA1111_INTEN0); |
| } |
| |
| /* |
| * Attempt to re-trigger the interrupt. The SA1111 contains a register |
| * (INTSET) which claims to do this. However, in practice no amount of |
| * manipulation of INTEN and INTSET guarantees that the interrupt will |
| * be triggered. In fact, its very difficult, if not impossible to get |
| * INTSET to re-trigger the interrupt. |
| */ |
| static int sa1111_retrigger_irq(struct irq_data *d) |
| { |
| struct sa1111 *sachip = irq_data_get_irq_chip_data(d); |
| void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); |
| u32 ip, mask = sa1111_irqmask(d); |
| int i; |
| |
| ip = readl_relaxed(mapbase + SA1111_INTPOL0); |
| for (i = 0; i < 8; i++) { |
| writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0); |
| writel_relaxed(ip, mapbase + SA1111_INTPOL0); |
| if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask) |
| break; |
| } |
| |
| if (i == 8) { |
| pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", |
| d->irq); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int sa1111_type_irq(struct irq_data *d, unsigned int flags) |
| { |
| struct sa1111 *sachip = irq_data_get_irq_chip_data(d); |
| void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); |
| u32 ip, mask = sa1111_irqmask(d); |
| |
| if (flags == IRQ_TYPE_PROBE) |
| return 0; |
| |
| if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) |
| return -EINVAL; |
| |
| ip = readl_relaxed(mapbase + SA1111_INTPOL0); |
| if (flags & IRQ_TYPE_EDGE_RISING) |
| ip &= ~mask; |
| else |
| ip |= mask; |
| writel_relaxed(ip, mapbase + SA1111_INTPOL0); |
| writel_relaxed(ip, mapbase + SA1111_WAKEPOL0); |
| |
| return 0; |
| } |
| |
| static int sa1111_wake_irq(struct irq_data *d, unsigned int on) |
| { |
| struct sa1111 *sachip = irq_data_get_irq_chip_data(d); |
| void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); |
| u32 we, mask = sa1111_irqmask(d); |
| |
| we = readl_relaxed(mapbase + SA1111_WAKEEN0); |
| if (on) |
| we |= mask; |
| else |
| we &= ~mask; |
| writel_relaxed(we, mapbase + SA1111_WAKEEN0); |
| |
| return 0; |
| } |
| |
| static struct irq_chip sa1111_irq_chip = { |
| .name = "SA1111", |
| .irq_ack = sa1111_ack_irq, |
| .irq_mask = sa1111_mask_irq, |
| .irq_unmask = sa1111_unmask_irq, |
| .irq_retrigger = sa1111_retrigger_irq, |
| .irq_set_type = sa1111_type_irq, |
| .irq_set_wake = sa1111_wake_irq, |
| }; |
| |
| static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| struct sa1111 *sachip = d->host_data; |
| |
| /* Disallow unavailable interrupts */ |
| if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA) |
| return -EINVAL; |
| |
| irq_set_chip_data(irq, sachip); |
| irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); |
| irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops sa1111_irqdomain_ops = { |
| .map = sa1111_irqdomain_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) |
| { |
| void __iomem *irqbase = sachip->base + SA1111_INTC; |
| int ret; |
| |
| /* |
| * We're guaranteed that this region hasn't been taken. |
| */ |
| request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); |
| |
| ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1); |
| if (ret <= 0) { |
| dev_err(sachip->dev, "unable to allocate %u irqs: %d\n", |
| SA1111_IRQ_NR, ret); |
| if (ret == 0) |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| sachip->irq_base = ret; |
| |
| /* disable all IRQs */ |
| writel_relaxed(0, irqbase + SA1111_INTEN0); |
| writel_relaxed(0, irqbase + SA1111_INTEN1); |
| writel_relaxed(0, irqbase + SA1111_WAKEEN0); |
| writel_relaxed(0, irqbase + SA1111_WAKEEN1); |
| |
| /* |
| * detect on rising edge. Note: Feb 2001 Errata for SA1111 |
| * specifies that S0ReadyInt and S1ReadyInt should be '1'. |
| */ |
| writel_relaxed(0, irqbase + SA1111_INTPOL0); |
| writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) | |
| BIT(IRQ_S1_READY_NINT & 31), |
| irqbase + SA1111_INTPOL1); |
| |
| /* clear all IRQs */ |
| writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0); |
| writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1); |
| |
| sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR, |
| &sa1111_irqdomain_ops, |
| sachip); |
| if (!sachip->irqdomain) { |
| irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); |
| return -ENOMEM; |
| } |
| |
| irq_domain_associate_many(sachip->irqdomain, |
| sachip->irq_base + IRQ_GPAIN0, |
| IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0); |
| irq_domain_associate_many(sachip->irqdomain, |
| sachip->irq_base + AUDXMTDMADONEA, |
| AUDXMTDMADONEA, |
| IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA); |
| |
| /* |
| * Register SA1111 interrupt |
| */ |
| irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); |
| irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler, |
| sachip); |
| |
| dev_info(sachip->dev, "Providing IRQ%u-%u\n", |
| sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1); |
| |
| return 0; |
| } |
| |
| static void sa1111_remove_irq(struct sa1111 *sachip) |
| { |
| struct irq_domain *domain = sachip->irqdomain; |
| void __iomem *irqbase = sachip->base + SA1111_INTC; |
| int i; |
| |
| /* disable all IRQs */ |
| writel_relaxed(0, irqbase + SA1111_INTEN0); |
| writel_relaxed(0, irqbase + SA1111_INTEN1); |
| writel_relaxed(0, irqbase + SA1111_WAKEEN0); |
| writel_relaxed(0, irqbase + SA1111_WAKEEN1); |
| |
| irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); |
| for (i = 0; i < SA1111_IRQ_NR; i++) |
| irq_dispose_mapping(irq_find_mapping(domain, i)); |
| irq_domain_remove(domain); |
| |
| release_mem_region(sachip->phys + SA1111_INTC, 512); |
| } |
| |
| enum { |
| SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR), |
| SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR), |
| SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR), |
| SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR), |
| SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR), |
| }; |
| |
| static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc) |
| { |
| return container_of(gc, struct sa1111, gc); |
| } |
| |
| static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset) |
| { |
| void __iomem *reg = sachip->base + SA1111_GPIO; |
| |
| if (offset < 4) |
| return reg + SA1111_GPIO_PADDR; |
| if (offset < 10) |
| return reg + SA1111_GPIO_PBDDR; |
| if (offset < 18) |
| return reg + SA1111_GPIO_PCDDR; |
| return NULL; |
| } |
| |
| static u32 sa1111_gpio_map_bit(unsigned offset) |
| { |
| if (offset < 4) |
| return BIT(offset); |
| if (offset < 10) |
| return BIT(offset - 4); |
| if (offset < 18) |
| return BIT(offset - 10); |
| return 0; |
| } |
| |
| static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set) |
| { |
| u32 val; |
| |
| val = readl_relaxed(reg); |
| val &= ~mask; |
| val |= mask & set; |
| writel_relaxed(val, reg); |
| } |
| |
| static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); |
| u32 mask = sa1111_gpio_map_bit(offset); |
| |
| return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask); |
| } |
| |
| static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| unsigned long flags; |
| void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); |
| u32 mask = sa1111_gpio_map_bit(offset); |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset, |
| int value) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| unsigned long flags; |
| void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); |
| u32 mask = sa1111_gpio_map_bit(offset); |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); |
| u32 mask = sa1111_gpio_map_bit(offset); |
| |
| return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask); |
| } |
| |
| static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| unsigned long flags; |
| void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); |
| u32 mask = sa1111_gpio_map_bit(offset); |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, |
| unsigned long *bits) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| unsigned long flags; |
| void __iomem *reg = sachip->base + SA1111_GPIO; |
| u32 msk, val; |
| |
| msk = *mask; |
| val = *bits; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12); |
| sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sa1111 *sachip = gc_to_sa1111(gc); |
| |
| return sa1111_map_irq(sachip, offset); |
| } |
| |
| static int sa1111_setup_gpios(struct sa1111 *sachip) |
| { |
| sachip->gc.label = "sa1111"; |
| sachip->gc.parent = sachip->dev; |
| sachip->gc.owner = THIS_MODULE; |
| sachip->gc.get_direction = sa1111_gpio_get_direction; |
| sachip->gc.direction_input = sa1111_gpio_direction_input; |
| sachip->gc.direction_output = sa1111_gpio_direction_output; |
| sachip->gc.get = sa1111_gpio_get; |
| sachip->gc.set = sa1111_gpio_set; |
| sachip->gc.set_multiple = sa1111_gpio_set_multiple; |
| sachip->gc.to_irq = sa1111_gpio_to_irq; |
| sachip->gc.base = -1; |
| sachip->gc.ngpio = 18; |
| |
| return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip); |
| } |
| |
| /* |
| * Bring the SA1111 out of reset. This requires a set procedure: |
| * 1. nRESET asserted (by hardware) |
| * 2. CLK turned on from SA1110 |
| * 3. nRESET deasserted |
| * 4. VCO turned on, PLL_BYPASS turned off |
| * 5. Wait lock time, then assert RCLKEn |
| * 7. PCR set to allow clocking of individual functions |
| * |
| * Until we've done this, the only registers we can access are: |
| * SBI_SKCR |
| * SBI_SMCR |
| * SBI_SKID |
| */ |
| static void sa1111_wake(struct sa1111 *sachip) |
| { |
| unsigned long flags, r; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| clk_enable(sachip->clk); |
| |
| /* |
| * Turn VCO on, and disable PLL Bypass. |
| */ |
| r = readl_relaxed(sachip->base + SA1111_SKCR); |
| r &= ~SKCR_VCO_OFF; |
| writel_relaxed(r, sachip->base + SA1111_SKCR); |
| r |= SKCR_PLL_BYPASS | SKCR_OE_EN; |
| writel_relaxed(r, sachip->base + SA1111_SKCR); |
| |
| /* |
| * Wait lock time. SA1111 manual _doesn't_ |
| * specify a figure for this! We choose 100us. |
| */ |
| udelay(100); |
| |
| /* |
| * Enable RCLK. We also ensure that RDYEN is set. |
| */ |
| r |= SKCR_RCLKEN | SKCR_RDYEN; |
| writel_relaxed(r, sachip->base + SA1111_SKCR); |
| |
| /* |
| * Wait 14 RCLK cycles for the chip to finish coming out |
| * of reset. (RCLK=24MHz). This is 590ns. |
| */ |
| udelay(1); |
| |
| /* |
| * Ensure all clocks are initially off. |
| */ |
| writel_relaxed(0, sachip->base + SA1111_SKPCR); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| |
| static u32 sa1111_dma_mask[] = { |
| ~0, |
| ~(1 << 20), |
| ~(1 << 23), |
| ~(1 << 24), |
| ~(1 << 25), |
| ~(1 << 20), |
| ~(1 << 20), |
| 0, |
| }; |
| |
| /* |
| * Configure the SA1111 shared memory controller. |
| */ |
| static void |
| sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, |
| unsigned int cas_latency) |
| { |
| unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC); |
| |
| if (cas_latency == 3) |
| smcr |= SMCR_CLAT; |
| |
| writel_relaxed(smcr, sachip->base + SA1111_SMCR); |
| |
| /* |
| * Now clear the bits in the DMA mask to work around the SA1111 |
| * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion |
| * Chip Specification Update, June 2000, Erratum #7). |
| */ |
| if (sachip->dev->dma_mask) |
| *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2]; |
| |
| sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; |
| } |
| #endif |
| |
| static void sa1111_dev_release(struct device *_dev) |
| { |
| struct sa1111_dev *dev = to_sa1111_device(_dev); |
| |
| kfree(dev); |
| } |
| |
| static int |
| sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, |
| struct sa1111_dev_info *info) |
| { |
| struct sa1111_dev *dev; |
| unsigned i; |
| int ret; |
| |
| dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| device_initialize(&dev->dev); |
| dev_set_name(&dev->dev, "%4.4lx", info->offset); |
| dev->devid = info->devid; |
| dev->dev.parent = sachip->dev; |
| dev->dev.bus = &sa1111_bus_type; |
| dev->dev.release = sa1111_dev_release; |
| dev->res.start = sachip->phys + info->offset; |
| dev->res.end = dev->res.start + 511; |
| dev->res.name = dev_name(&dev->dev); |
| dev->res.flags = IORESOURCE_MEM; |
| dev->mapbase = sachip->base + info->offset; |
| dev->skpcr_mask = info->skpcr_mask; |
| |
| for (i = 0; i < ARRAY_SIZE(info->hwirq); i++) |
| dev->hwirq[i] = info->hwirq[i]; |
| |
| /* |
| * If the parent device has a DMA mask associated with it, and |
| * this child supports DMA, propagate it down to the children. |
| */ |
| if (info->dma && sachip->dev->dma_mask) { |
| dev->dma_mask = *sachip->dev->dma_mask; |
| dev->dev.dma_mask = &dev->dma_mask; |
| dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; |
| } |
| |
| ret = request_resource(parent, &dev->res); |
| if (ret) { |
| dev_err(sachip->dev, "failed to allocate resource for %s\n", |
| dev->res.name); |
| goto err_resource; |
| } |
| |
| ret = device_add(&dev->dev); |
| if (ret) |
| goto err_add; |
| return 0; |
| |
| err_add: |
| release_resource(&dev->res); |
| err_resource: |
| put_device(&dev->dev); |
| err_alloc: |
| return ret; |
| } |
| |
| static int __sa1111_probe(struct device *me, struct resource *mem, int irq) |
| { |
| struct sa1111_platform_data *pd = me->platform_data; |
| struct sa1111 *sachip; |
| unsigned long id; |
| unsigned int has_devs; |
| int i, ret = -ENODEV; |
| |
| if (!pd) |
| return -EINVAL; |
| |
| sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL); |
| if (!sachip) |
| return -ENOMEM; |
| |
| sachip->clk = devm_clk_get(me, "SA1111_CLK"); |
| if (IS_ERR(sachip->clk)) |
| return PTR_ERR(sachip->clk); |
| |
| ret = clk_prepare(sachip->clk); |
| if (ret) |
| return ret; |
| |
| spin_lock_init(&sachip->lock); |
| |
| sachip->dev = me; |
| dev_set_drvdata(sachip->dev, sachip); |
| |
| sachip->pdata = pd; |
| sachip->phys = mem->start; |
| sachip->irq = irq; |
| |
| /* |
| * Map the whole region. This also maps the |
| * registers for our children. |
| */ |
| sachip->base = ioremap(mem->start, PAGE_SIZE * 2); |
| if (!sachip->base) { |
| ret = -ENOMEM; |
| goto err_clk_unprep; |
| } |
| |
| /* |
| * Probe for the chip. Only touch the SBI registers. |
| */ |
| id = readl_relaxed(sachip->base + SA1111_SKID); |
| if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { |
| printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); |
| ret = -ENODEV; |
| goto err_unmap; |
| } |
| |
| pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n", |
| (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK); |
| |
| /* |
| * We found it. Wake the chip up, and initialise. |
| */ |
| sa1111_wake(sachip); |
| |
| /* |
| * The interrupt controller must be initialised before any |
| * other device to ensure that the interrupts are available. |
| */ |
| ret = sa1111_setup_irq(sachip, pd->irq_base); |
| if (ret) |
| goto err_clk; |
| |
| /* Setup the GPIOs - should really be done after the IRQ setup */ |
| ret = sa1111_setup_gpios(sachip); |
| if (ret) |
| goto err_irq; |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| { |
| unsigned int val; |
| |
| /* |
| * The SDRAM configuration of the SA1110 and the SA1111 must |
| * match. This is very important to ensure that SA1111 accesses |
| * don't corrupt the SDRAM. Note that this ungates the SA1111's |
| * MBGNT signal, so we must have called sa1110_mb_disable() |
| * beforehand. |
| */ |
| sa1111_configure_smc(sachip, 1, |
| FExtr(MDCNFG, MDCNFG_SA1110_DRAC0), |
| FExtr(MDCNFG, MDCNFG_SA1110_TDL0)); |
| |
| /* |
| * We only need to turn on DCLK whenever we want to use the |
| * DMA. It can otherwise be held firmly in the off position. |
| * (currently, we always enable it.) |
| */ |
| val = readl_relaxed(sachip->base + SA1111_SKPCR); |
| writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); |
| |
| /* |
| * Enable the SA1110 memory bus request and grant signals. |
| */ |
| sa1110_mb_enable(); |
| } |
| #endif |
| |
| g_sa1111 = sachip; |
| |
| has_devs = ~0; |
| if (pd) |
| has_devs &= ~pd->disable_devs; |
| |
| for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) |
| if (sa1111_devices[i].devid & has_devs) |
| sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); |
| |
| return 0; |
| |
| err_irq: |
| sa1111_remove_irq(sachip); |
| err_clk: |
| clk_disable(sachip->clk); |
| err_unmap: |
| iounmap(sachip->base); |
| err_clk_unprep: |
| clk_unprepare(sachip->clk); |
| return ret; |
| } |
| |
| static int sa1111_remove_one(struct device *dev, void *data) |
| { |
| struct sa1111_dev *sadev = to_sa1111_device(dev); |
| if (dev->bus != &sa1111_bus_type) |
| return 0; |
| device_del(&sadev->dev); |
| release_resource(&sadev->res); |
| put_device(&sadev->dev); |
| return 0; |
| } |
| |
| static void __sa1111_remove(struct sa1111 *sachip) |
| { |
| device_for_each_child(sachip->dev, NULL, sa1111_remove_one); |
| |
| sa1111_remove_irq(sachip); |
| |
| clk_disable(sachip->clk); |
| clk_unprepare(sachip->clk); |
| |
| iounmap(sachip->base); |
| } |
| |
| struct sa1111_save_data { |
| unsigned int skcr; |
| unsigned int skpcr; |
| unsigned int skcdr; |
| unsigned char skaud; |
| unsigned char skpwm0; |
| unsigned char skpwm1; |
| |
| /* |
| * Interrupt controller |
| */ |
| unsigned int intpol0; |
| unsigned int intpol1; |
| unsigned int inten0; |
| unsigned int inten1; |
| unsigned int wakepol0; |
| unsigned int wakepol1; |
| unsigned int wakeen0; |
| unsigned int wakeen1; |
| }; |
| |
| #ifdef CONFIG_PM |
| |
| static int sa1111_suspend_noirq(struct device *dev) |
| { |
| struct sa1111 *sachip = dev_get_drvdata(dev); |
| struct sa1111_save_data *save; |
| unsigned long flags; |
| unsigned int val; |
| void __iomem *base; |
| |
| save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); |
| if (!save) |
| return -ENOMEM; |
| sachip->saved_state = save; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| /* |
| * Save state. |
| */ |
| base = sachip->base; |
| save->skcr = readl_relaxed(base + SA1111_SKCR); |
| save->skpcr = readl_relaxed(base + SA1111_SKPCR); |
| save->skcdr = readl_relaxed(base + SA1111_SKCDR); |
| save->skaud = readl_relaxed(base + SA1111_SKAUD); |
| save->skpwm0 = readl_relaxed(base + SA1111_SKPWM0); |
| save->skpwm1 = readl_relaxed(base + SA1111_SKPWM1); |
| |
| writel_relaxed(0, sachip->base + SA1111_SKPWM0); |
| writel_relaxed(0, sachip->base + SA1111_SKPWM1); |
| |
| base = sachip->base + SA1111_INTC; |
| save->intpol0 = readl_relaxed(base + SA1111_INTPOL0); |
| save->intpol1 = readl_relaxed(base + SA1111_INTPOL1); |
| save->inten0 = readl_relaxed(base + SA1111_INTEN0); |
| save->inten1 = readl_relaxed(base + SA1111_INTEN1); |
| save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0); |
| save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1); |
| save->wakeen0 = readl_relaxed(base + SA1111_WAKEEN0); |
| save->wakeen1 = readl_relaxed(base + SA1111_WAKEEN1); |
| |
| /* |
| * Disable. |
| */ |
| val = readl_relaxed(sachip->base + SA1111_SKCR); |
| writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); |
| |
| clk_disable(sachip->clk); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| sa1110_mb_disable(); |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| * sa1111_resume - Restore the SA1111 device state. |
| * @dev: device to restore |
| * |
| * Restore the general state of the SA1111; clock control and |
| * interrupt controller. Other parts of the SA1111 must be |
| * restored by their respective drivers, and must be called |
| * via LDM after this function. |
| */ |
| static int sa1111_resume_noirq(struct device *dev) |
| { |
| struct sa1111 *sachip = dev_get_drvdata(dev); |
| struct sa1111_save_data *save; |
| unsigned long flags, id; |
| void __iomem *base; |
| |
| save = sachip->saved_state; |
| if (!save) |
| return 0; |
| |
| /* |
| * Ensure that the SA1111 is still here. |
| * FIXME: shouldn't do this here. |
| */ |
| id = readl_relaxed(sachip->base + SA1111_SKID); |
| if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { |
| __sa1111_remove(sachip); |
| dev_set_drvdata(dev, NULL); |
| kfree(save); |
| return 0; |
| } |
| |
| /* |
| * First of all, wake up the chip. |
| */ |
| sa1111_wake(sachip); |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| /* Enable the memory bus request/grant signals */ |
| sa1110_mb_enable(); |
| #endif |
| |
| /* |
| * Only lock for write ops. Also, sa1111_wake must be called with |
| * released spinlock! |
| */ |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0); |
| writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1); |
| |
| base = sachip->base; |
| writel_relaxed(save->skcr, base + SA1111_SKCR); |
| writel_relaxed(save->skpcr, base + SA1111_SKPCR); |
| writel_relaxed(save->skcdr, base + SA1111_SKCDR); |
| writel_relaxed(save->skaud, base + SA1111_SKAUD); |
| writel_relaxed(save->skpwm0, base + SA1111_SKPWM0); |
| writel_relaxed(save->skpwm1, base + SA1111_SKPWM1); |
| |
| base = sachip->base + SA1111_INTC; |
| writel_relaxed(save->intpol0, base + SA1111_INTPOL0); |
| writel_relaxed(save->intpol1, base + SA1111_INTPOL1); |
| writel_relaxed(save->inten0, base + SA1111_INTEN0); |
| writel_relaxed(save->inten1, base + SA1111_INTEN1); |
| writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0); |
| writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1); |
| writel_relaxed(save->wakeen0, base + SA1111_WAKEEN0); |
| writel_relaxed(save->wakeen1, base + SA1111_WAKEEN1); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| sachip->saved_state = NULL; |
| kfree(save); |
| |
| return 0; |
| } |
| |
| #else |
| #define sa1111_suspend_noirq NULL |
| #define sa1111_resume_noirq NULL |
| #endif |
| |
| /** |
| * sa1111_probe - probe for a single SA1111 chip. |
| * @pdev: platform device. |
| * |
| * Probe for a SA1111 chip. This must be called |
| * before any other SA1111-specific code. |
| * |
| * Returns: |
| * * %-ENODEV - device not found. |
| * * %-ENOMEM - memory allocation failure. |
| * * %-EBUSY - physical address already marked in-use. |
| * * %-EINVAL - no platform data passed |
| * * %0 - successful. |
| */ |
| static int sa1111_probe(struct platform_device *pdev) |
| { |
| struct resource *mem; |
| int irq; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) |
| return -EINVAL; |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| return __sa1111_probe(&pdev->dev, mem, irq); |
| } |
| |
| static void sa1111_remove(struct platform_device *pdev) |
| { |
| struct sa1111 *sachip = platform_get_drvdata(pdev); |
| |
| if (sachip) { |
| #ifdef CONFIG_PM |
| kfree(sachip->saved_state); |
| sachip->saved_state = NULL; |
| #endif |
| __sa1111_remove(sachip); |
| platform_set_drvdata(pdev, NULL); |
| } |
| } |
| |
| static struct dev_pm_ops sa1111_pm_ops = { |
| .suspend_noirq = sa1111_suspend_noirq, |
| .resume_noirq = sa1111_resume_noirq, |
| }; |
| |
| /* |
| * Not sure if this should be on the system bus or not yet. |
| * We really want some way to register a system device at |
| * the per-machine level, and then have this driver pick |
| * up the registered devices. |
| * |
| * We also need to handle the SDRAM configuration for |
| * PXA250/SA1110 machine classes. |
| */ |
| static struct platform_driver sa1111_device_driver = { |
| .probe = sa1111_probe, |
| .remove = sa1111_remove, |
| .driver = { |
| .name = "sa1111", |
| .pm = &sa1111_pm_ops, |
| }, |
| }; |
| |
| /* |
| * Get the parent device driver (us) structure |
| * from a child function device |
| */ |
| static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) |
| { |
| return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent); |
| } |
| |
| /* |
| * The bits in the opdiv field are non-linear. |
| */ |
| static unsigned char opdiv_table[] = { 1, 4, 2, 8 }; |
| |
| static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) |
| { |
| unsigned int skcdr, fbdiv, ipdiv, opdiv; |
| |
| skcdr = readl_relaxed(sachip->base + SA1111_SKCDR); |
| |
| fbdiv = (skcdr & 0x007f) + 2; |
| ipdiv = ((skcdr & 0x0f80) >> 7) + 2; |
| opdiv = opdiv_table[(skcdr & 0x3000) >> 12]; |
| |
| return 3686400 * fbdiv / (ipdiv * opdiv); |
| } |
| |
| /** |
| * sa1111_pll_clock - return the current PLL clock frequency. |
| * @sadev: SA1111 function block |
| * |
| * BUG: we should look at SKCR. We also blindly believe that |
| * the chip is being fed with the 3.6864MHz clock. |
| * |
| * Returns the PLL clock in Hz. |
| */ |
| unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| |
| return __sa1111_pll_clock(sachip); |
| } |
| EXPORT_SYMBOL(sa1111_pll_clock); |
| |
| /** |
| * sa1111_select_audio_mode - select I2S or AC link mode |
| * @sadev: SA1111 function block |
| * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S |
| * |
| * Frob the SKCR to select AC Link mode or I2S mode for |
| * the audio block. |
| */ |
| void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| val = readl_relaxed(sachip->base + SA1111_SKCR); |
| if (mode == SA1111_AUDIO_I2S) { |
| val &= ~SKCR_SELAC; |
| } else { |
| val |= SKCR_SELAC; |
| } |
| writel_relaxed(val, sachip->base + SA1111_SKCR); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| EXPORT_SYMBOL(sa1111_select_audio_mode); |
| |
| /** |
| * sa1111_set_audio_rate - set the audio sample rate |
| * @sadev: SA1111 SAC function block |
| * @rate: sample rate to select |
| */ |
| int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned int div; |
| |
| if (sadev->devid != SA1111_DEVID_SAC) |
| return -EINVAL; |
| |
| div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate; |
| if (div == 0) |
| div = 1; |
| if (div > 128) |
| div = 128; |
| |
| writel_relaxed(div - 1, sachip->base + SA1111_SKAUD); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sa1111_set_audio_rate); |
| |
| /** |
| * sa1111_get_audio_rate - get the audio sample rate |
| * @sadev: SA1111 SAC function block device |
| */ |
| int sa1111_get_audio_rate(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long div; |
| |
| if (sadev->devid != SA1111_DEVID_SAC) |
| return -EINVAL; |
| |
| div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1; |
| |
| return __sa1111_pll_clock(sachip) / (256 * div); |
| } |
| EXPORT_SYMBOL(sa1111_get_audio_rate); |
| |
| /* |
| * Individual device operations. |
| */ |
| |
| /** |
| * sa1111_enable_device - enable an on-chip SA1111 function block |
| * @sadev: SA1111 function block device to enable |
| */ |
| int sa1111_enable_device(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| int ret = 0; |
| |
| if (sachip->pdata && sachip->pdata->enable) |
| ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid); |
| |
| if (ret == 0) { |
| spin_lock_irqsave(&sachip->lock, flags); |
| val = readl_relaxed(sachip->base + SA1111_SKPCR); |
| writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(sa1111_enable_device); |
| |
| /** |
| * sa1111_disable_device - disable an on-chip SA1111 function block |
| * @sadev: SA1111 function block device to disable |
| */ |
| void sa1111_disable_device(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| val = readl_relaxed(sachip->base + SA1111_SKPCR); |
| writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| if (sachip->pdata && sachip->pdata->disable) |
| sachip->pdata->disable(sachip->pdata->data, sadev->devid); |
| } |
| EXPORT_SYMBOL(sa1111_disable_device); |
| |
| int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| if (num >= ARRAY_SIZE(sadev->hwirq)) |
| return -EINVAL; |
| return sa1111_map_irq(sachip, sadev->hwirq[num]); |
| } |
| EXPORT_SYMBOL_GPL(sa1111_get_irq); |
| |
| /* |
| * SA1111 "Register Access Bus." |
| * |
| * We model this as a regular bus type, and hang devices directly |
| * off this. |
| */ |
| static int sa1111_match(struct device *_dev, const struct device_driver *_drv) |
| { |
| struct sa1111_dev *dev = to_sa1111_device(_dev); |
| const struct sa1111_driver *drv = SA1111_DRV(_drv); |
| |
| return !!(dev->devid & drv->devid); |
| } |
| |
| static int sa1111_bus_probe(struct device *dev) |
| { |
| struct sa1111_dev *sadev = to_sa1111_device(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| int ret = -ENODEV; |
| |
| if (drv->probe) |
| ret = drv->probe(sadev); |
| return ret; |
| } |
| |
| static void sa1111_bus_remove(struct device *dev) |
| { |
| struct sa1111_dev *sadev = to_sa1111_device(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| |
| if (drv->remove) |
| drv->remove(sadev); |
| } |
| |
| struct bus_type sa1111_bus_type = { |
| .name = "sa1111-rab", |
| .match = sa1111_match, |
| .probe = sa1111_bus_probe, |
| .remove = sa1111_bus_remove, |
| }; |
| EXPORT_SYMBOL(sa1111_bus_type); |
| |
| int sa1111_driver_register(struct sa1111_driver *driver) |
| { |
| driver->drv.bus = &sa1111_bus_type; |
| return driver_register(&driver->drv); |
| } |
| EXPORT_SYMBOL(sa1111_driver_register); |
| |
| void sa1111_driver_unregister(struct sa1111_driver *driver) |
| { |
| driver_unregister(&driver->drv); |
| } |
| EXPORT_SYMBOL(sa1111_driver_unregister); |
| |
| static int __init sa1111_init(void) |
| { |
| int ret = bus_register(&sa1111_bus_type); |
| if (ret == 0) |
| platform_driver_register(&sa1111_device_driver); |
| return ret; |
| } |
| |
| static void __exit sa1111_exit(void) |
| { |
| platform_driver_unregister(&sa1111_device_driver); |
| bus_unregister(&sa1111_bus_type); |
| } |
| |
| subsys_initcall(sa1111_init); |
| module_exit(sa1111_exit); |
| |
| MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); |
| MODULE_LICENSE("GPL"); |